add QSPI support to arty_a7

[ls2.git] / src / ls2.py

# Copyright (c) 2020 LambdaConcept <contact@lambdaconcept.com>
# Copyright (c) 2021 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
# Copyright (C) 2022 Raptor Engineering, LLC <support@raptorengineering.com>
#
# Based on code from LambaConcept, from the gram example which is BSD-2-License
# https://github.com/jeanthom/gram/tree/master/examples
#
# Modifications for the Libre-SOC Project funded by NLnet and NGI POINTER
# under EU Grants 871528 and 957073, under the LGPLv3+ License

from nmigen import (Module, Elaboratable, DomainRenamer, Record,
                    Signal, Cat, Const, ClockSignal, ResetSignal)
from nmigen.build.dsl import Attrs
from nmigen.cli import verilog
from nmigen.lib.cdc import ResetSynchronizer
from nmigen_soc import wishbone, memory
from nmigen_soc.memory import MemoryMap
from nmigen.utils import log2_int

from nmigen_stdio.serial import AsyncSerial

# HyperRAM
from nmigen_boards.resources.memory import HyperRAMResource
from lambdasoc.periph.hyperram import HyperRAM, HyperRAMPads, HyperRAMPHY

from lambdasoc.periph.intc import GenericInterruptController
from lambdasoc.periph.sram import SRAMPeripheral
from lambdasoc.periph.timer import TimerPeripheral
from lambdasoc.periph import Peripheral
from lambdasoc.soc.base import SoC
from soc.bus.uart_16550 import UART16550 # opencores 16550 uart
from soc.bus.tercel import Tercel # SPI XIP master
from soc.bus.opencores_ethmac import EthMAC # OpenCores 10/100 Ethernet MAC
from soc.bus.external_core import ExternalCore # external libresoc/microwatt
from soc.bus.wb_downconvert import WishboneDownConvert
from soc.bus.syscon import MicrowattSYSCON

# DDR3
from gram.common import (PhySettings, get_cl_cw, get_sys_latency,
                        get_sys_phases,)
from gram.core import gramCore
from gram.phy.ecp5ddrphy import ECP5DDRPHY
from gram.phy.fakephy import FakePHY, SDRAM_VERBOSE_STD, SDRAM_VERBOSE_DBG
from gram.modules import MT41K256M16, MT41K64M16
from gram.frontend.wishbone import gramWishbone

# SPI / Ethernet MAC
from nmigen.build import Resource
from nmigen.build import Subsignal
from nmigen.build import Pins

# Board (and simulation) platforms
from nmigen_boards.versa_ecp5 import VersaECP5Platform
from nmigen_boards.versa_ecp5 import VersaECP5Platform85 # custom board
from nmigen_boards.ulx3s import ULX3S_85F_Platform
from nmigen_boards.arty_a7 import ArtyA7_100Platform
from nmigen_boards.test.blinky import Blinky
from icarusversa import IcarusVersaPlatform
# Clock-Reset Generator (works for all ECP5 platforms)
from ecp5_crg import ECP5CRG
from arty_crg import ArtyA7CRG

import sys
import os

def sim_ddr3_settings(clk_freq=100e6):
    tck = 2/(2*2*clk_freq)
    nphases = 2
    databits = 16
    nranks = 1
    addressbits = 14
    bankbits = 3
    cl, cwl = get_cl_cw("DDR3", tck)
    cl_sys_latency = get_sys_latency(nphases, cl)
    cwl_sys_latency = get_sys_latency(nphases, cwl)
    rdcmdphase, rdphase = get_sys_phases(nphases, cl_sys_latency, cl)
    wrcmdphase, wrphase = get_sys_phases(nphases, cwl_sys_latency, cwl)
    return PhySettings(
        phytype="ECP5DDRPHY",
        memtype="DDR3",
        databits=databits,
        dfi_databits=4*databits,
        nranks=nranks,
        nphases=nphases,
        rdphase=rdphase,
        wrphase=wrphase,
        rdcmdphase=rdcmdphase,
        wrcmdphase=wrcmdphase,
        cl=cl,
        cwl=cwl,
        read_latency=2 + cl_sys_latency + 2 + log2_int(4//nphases) + 4,
        write_latency=cwl_sys_latency
    )


class WB64to32Convert(Elaboratable):
    """Microwatt IO wishbone slave 64->32 bits converter

    For timing reasons, this adds a one cycle latch on the way both
    in and out. This relaxes timing and routing pressure on the "main"
    memory bus by moving all simple IOs to a slower 32-bit bus.

    This implementation is rather dumb at the moment, no stash buffer,
    so we stall whenever that latch is busy. This can be improved.
    """
    def __init__(self, master, slave):
        self.master = master
        self.slave = slave

    def elaborate(self, platform):
        m = Module()
        comb, sync = m.d.comb, m.d.sync
        master, slave = self.master, self.slave

        has_top = Signal()
        has_top_r = Signal()
        has_bot = Signal()

        with m.FSM() as fsm:
            with m.State("IDLE"):
                # Clear ACK (and has_top_r) in case it was set
                sync += master.ack.eq(0)
                sync += has_top_r.eq(0)

                # Do we have a cycle ?
                with m.If(master.cyc & master.stb):
                    # Stall master until we are done, we are't (yet) pipelining
                    # this, it's all slow IOs.
                    sync += master.stall.eq(1)

                    # Start cycle downstream
                    sync += slave.cyc.eq(1)
                    sync += slave.stb.eq(1)

                    # Do we have a top word and/or a bottom word ?
                    comb += has_top.eq(master.sel[4:].bool())
                    comb += has_bot.eq(master.sel[:4].bool())
                    # record the has_top flag for the next FSM state
                    sync += has_top_r.eq(has_top)

                    # Copy write enable to IO out, copy address as well,
                    # LSB is set later based on HI/LO
                    sync += slave.we.eq(master.we)
                    sync += slave.adr.eq(Cat(0, master.adr))

                    # If we have a bottom word, handle it first, otherwise
                    # send the top word down. XXX Split the actual mux out
                    # and only generate a control signal.
                    with m.If(has_bot):
                        with m.If(master.we):
                            sync += slave.dat_w.eq(master.dat_w[:32])
                        sync += slave.sel.eq(master.sel[:4])

                        # Wait for ack on BOTTOM half
                        m.next = "WAIT_ACK_BOT"

                    with m.Else():
                        with m.If(master.we):
                            sync += slave.dat_w.eq(master.dat_w[32:])
                        sync += slave.sel.eq(master.sel[4:])

                        # Bump LSB of address
                        sync += slave.adr[0].eq(1)

                        # Wait for ack on TOP half
                        m.next = "WAIT_ACK_TOP"


            with m.State("WAIT_ACK_BOT"):
                # If we aren't stalled by the device, clear stb
                if hasattr(slave, "stall"):
                    with m.If(~slave.stall):
                        sync += slave.stb.eq(0)

                # Handle ack
                with m.If(slave.ack):
                    # If it's a read, latch the data
                    with m.If(~slave.we):
                        sync += master.dat_r[:32].eq(slave.dat_r)

                    # Do we have a "top" part as well ?
                    with m.If(has_top_r):
                        # Latch data & sel
                        with m.If(master.we):
                            sync += slave.dat_w.eq(master.dat_w[32:])
                        sync += slave.sel.eq(master.sel[4:])

                        # Bump address and set STB
                        sync += slave.adr[0].eq(1)
                        sync += slave.stb.eq(1)

                        # Wait for new ack
                        m.next = "WAIT_ACK_TOP"

                    with m.Else():
                        # We are done, ack up, clear cyc downstram
                        sync += slave.cyc.eq(0)
                        sync += slave.stb.eq(0)

                        # And ack & unstall upstream
                        sync += master.ack.eq(1)
                        if hasattr(master , "stall"):
                            sync += master.stall.eq(0)

                        # Wait for next one
                        m.next = "IDLE"

            with m.State("WAIT_ACK_TOP"):
                # If we aren't stalled by the device, clear stb
                if hasattr(slave, "stall"):
                    with m.If(~slave.stall):
                        sync += slave.stb.eq(0)

                # Handle ack
                with m.If(slave.ack):
                    # If it's a read, latch the data
                    with m.If(~slave.we):
                        sync += master.dat_r[32:].eq(slave.dat_r)

                    # We are done, ack up, clear cyc downstram
                    sync += slave.cyc.eq(0)
                    sync += slave.stb.eq(0)

                    # And ack & unstall upstream
                    sync += master.ack.eq(1)
                    if hasattr(master, "stall"):
                        sync += master.stall.eq(0)

                    # Wait for next one
                    m.next = "IDLE"

        return m


class DDR3SoC(SoC, Elaboratable):
    def __init__(self, *,
                 fpga,
                 dram_cls,
                 uart_pins, spi_0_pins, ethmac_0_pins,
                 ddr_pins, ddrphy_addr, dramcore_addr, ddr_addr,
                 fw_addr=0x0000_0000,
                 firmware=None,
                 spi0_addr, spi0_cfg_addr,
                 eth0_cfg_addr, eth0_irqno,
                 hyperram_addr=None,
                 hyperram_pins=None,
                 clk_freq=50e6,
                 add_cpu=True):

        # wishbone routing is as follows:
        #
        #         SoC
        #       +--+--+
        #       |     |
        #      ibus  dbus
        #       |     |
        #       +--+--+
        #          |
        #      64to32DownCvt
        #          |
        #       arbiter------------------------------------------+
        #          |                                             |
        #   +---decoder----+--------+---------+-------+--------+ |
        #   |      |       |        |         |       |        | |
        #  uart  XICS    CSRs     DRAM     XIP SPI HyperRAM   EthMAC

        # set up wishbone bus arbiter and decoder. arbiter routes,
        # decoder maps local-relative addressed satellites to global addresses
        self._arbiter = wishbone.Arbiter(addr_width=30, data_width=32,
                                         granularity=8,
                                         features={"cti", "bte", "stall"})
        self._decoder = wishbone.Decoder(addr_width=30, data_width=32,
                                         granularity=8,
                                         features={"cti", "bte", "stall"})

        # default firmware name
        if firmware is None:
            firmware = "firmware/main.bin"

        # set up clock request generator
        pod_bits = 25
        if fpga in ['versa_ecp5', 'versa_ecp5_85', 'isim', 'ulx3s']:
            if fpga in ['isim']:
                pod_bits = 6
            self.crg = ECP5CRG(clk_freq, pod_bits)
        if fpga in ['arty_a7']:
            self.crg = ArtyA7CRG(clk_freq)

        # set up CPU, with 64-to-32-bit downconverters
        if add_cpu:
            self.cpu = ExternalCore(name="ext_core")
            cvtdbus = wishbone.Interface(addr_width=30, data_width=32,
                                         granularity=8, features={'stall'})
            cvtibus = wishbone.Interface(addr_width=30, data_width=32,
                                         granularity=8, features={'stall'})
            self.dbusdowncvt = WB64to32Convert(self.cpu.dbus, cvtdbus)
            self.ibusdowncvt = WB64to32Convert(self.cpu.ibus, cvtibus)
            self._arbiter.add(cvtibus) # I-Cache Master
            self._arbiter.add(cvtdbus) # D-Cache Master. TODO JTAG master
            self.cvtibus = cvtibus
            self.cvtdbus = cvtdbus

            # CPU interrupt controller
            self.intc = GenericInterruptController(width=len(self.cpu.irq))

        # SRAM (but actually a ROM, for firmware), at address 0x0
        if fw_addr is not None:
            sram_width = 32
            self.bootmem = SRAMPeripheral(size=0x8000, data_width=sram_width,
                                      writable=True)
            if firmware is not None:
                with open(firmware, "rb") as f:
                    words = iter(lambda: f.read(sram_width // 8), b'')
                    bios  = [int.from_bytes(w, "little") for w in words]
                self.bootmem.init = bios
            self._decoder.add(self.bootmem.bus, addr=fw_addr) # ROM at fw_addr

        # System Configuration info
        self.syscon = MicrowattSYSCON(sys_clk_freq=clk_freq,
                                      has_uart=(uart_pins is not None))
        self._decoder.add(self.syscon.bus, addr=0xc0000000) # at 0xc000_0000

        if False:
            # SRAM (read-writeable BRAM)
            self.ram = SRAMPeripheral(size=4096)
            self._decoder.add(self.ram.bus, addr=0x8000000) # at 0x8000_0000

        # UART at 0xC000_2000, convert 32-bit bus down to 8-bit in an odd way
        if uart_pins is not None:
            # sigh actual UART in microwatt is 8-bit
            self.uart = UART16550(data_width=8, pins=uart_pins,
                                  features={'stall'})
            # but (see soc.vhdl) 8-bit regs are addressed at 32-bit locations
            cvtuartbus = wishbone.Interface(addr_width=5, data_width=32,
                                            granularity=8,
                                            features={'stall'})
            umap = MemoryMap(addr_width=7, data_width=8, name="uart_map")
            cvtuartbus.memory_map = umap
            self._decoder.add(cvtuartbus, addr=0xc0002000) # 16550 UART addr
            self.cvtuartbus = cvtuartbus

        # SDRAM module using opencores sdr_ctrl
        """
        class MT48LC16M16(SDRModule):
            # geometry
            nbanks = 4
            nrows  = 8192
            ncols  = 512
            # timings
            technology_timings = _TechnologyTimings(tREFI=64e6/8192,
                                                    tWTR=(2, None),
                                                    tCCD=(1, None),
                                                    tRRD=(None, 15))
            speedgrade_timings = {"default": _SpeedgradeTimings(tRP=20,
                                                    tRCD=20,
                                                    tWR=15,
                                                    tRFC=(None, 66),
                                                    tFAW=None,
                                                    tRAS=44)}
        """

        # DRAM Module
        if ddr_pins is not None or fpga == 'sim':
            ddrmodule = dram_cls(clk_freq, "1:2") # match DDR3 ASIC P/N

            #drs = lambda x: x
            drs = DomainRenamer("dramsync")

            if fpga == 'sim':
                self.ddrphy = FakePHY(module=ddrmodule,
                                      settings=sim_ddr3_settings(clk_freq),
                                      verbosity=SDRAM_VERBOSE_DBG,
                                      clk_freq=clk_freq)
            else:
                self.ddrphy = drs(ECP5DDRPHY(ddr_pins, sys_clk_freq=clk_freq))
            self._decoder.add(self.ddrphy.bus, addr=ddrphy_addr)

            dramcore = gramCore(phy=self.ddrphy,
                                geom_settings=ddrmodule.geom_settings,
                                timing_settings=ddrmodule.timing_settings,
                                clk_freq=clk_freq)
            if fpga == 'sim':
                self.dramcore = dramcore
            else:
                self.dramcore = drs(dramcore)
            self._decoder.add(self.dramcore.bus, addr=dramcore_addr)

            # map the DRAM onto Wishbone, XXX use stall but set classic below
            drambone = gramWishbone(dramcore, features={'stall'})
            if fpga == 'sim':
                self.drambone = drambone
            else:
                self.drambone = drs(drambone)
            self._decoder.add(self.drambone.bus, addr=ddr_addr)

        # SPI controller
        if spi_0_pins is not None and fpga in ['sim',
                                             'isim',
                                             'rcs_arctic_tern_bmc_card',
                                             'versa_ecp5',
                                             'versa_ecp5_85',
                                             'arty_a7']:
            # The Lattice ECP5 devices require special handling on the
            # dedicated SPI clock line, which is shared with the internal
            # SPI controller used for FPGA bitstream loading.
            spi0_is_lattice_ecp5_clk = False
            if fpga in ['versa_ecp5',
                        'versa_ecp5_85',
                        'rcs_arctic_tern_bmc_card',
                        'isim']:
                spi0_is_lattice_ecp5_clk = True

            # Tercel contains two independent Wishbone regions, a
            # configuration region and the direct API access region,
            # Set the SPI 0 access region to 16MB, as the FPGA
            # bitstream Flash device is unlikely to be larger than this.
            # The main SPI Flash (SPI 1) should be set to at
            # least 28 bits (256MB) to allow the use of large 4BA devices.
            self.spi0 = Tercel(data_width=32, spi_region_addr_width=24,
                               adr_offset=spi0_addr,
                               features={'stall'},
                               clk_freq=clk_freq,
                               pins=spi_0_pins,
                               lattice_ecp5_usrmclk=spi0_is_lattice_ecp5_clk)
            self._decoder.add(self.spi0.bus, addr=spi0_addr)
            self._decoder.add(self.spi0.cfg_bus, addr=spi0_cfg_addr)

        # Ethernet MAC
        if ethmac_0_pins is not None and fpga in ['versa_ecp5',
                                                  'versa_ecp5_85',
                                                  'isim']:
            # The OpenCores Ethernet MAC contains two independent Wishbone
            # interfaces, a slave (configuration) interface and a master (DMA)
            # interface.
            self.eth0 = EthMAC(pins=ethmac_0_pins)
            self._arbiter.add(self.eth0.master_bus)
            self._decoder.add(self.eth0.slave_bus, addr=eth0_cfg_addr)
            self.intc.add_irq(self.eth0.irq, index=eth0_irqno)

        # HyperRAM modules *plural*. Assumes using a Quad PMOD by Piotr
        # Esden, sold by 1bitsquared, only doing one CS_N enable at the
        # moment
        if hyperram_pins is not None:
            self.hyperram = HyperRAM(io=hyperram_pins, phy_kls=HyperRAMPHY,
                                     features={'stall'},
                                     latency=7) # Winbond W956D8MBYA
            self._decoder.add(self.hyperram.bus, addr=hyperram_addr)

        self.memory_map = self._decoder.bus.memory_map

        self.clk_freq = clk_freq
        self.fpga = fpga

    def elaborate(self, platform):
        m = Module()
        comb = m.d.comb

        # add the peripherals and clock-reset-generator
        if platform is not None and hasattr(self, "crg"):
            m.submodules.sysclk = self.crg

        if hasattr(self, "bootmem"):
            m.submodules.bootmem = self.bootmem
        m.submodules.syscon = self.syscon
        if hasattr(self, "ram"):
            m.submodules.ram = self.ram
        if hasattr(self, "uart"):
            m.submodules.uart = self.uart
            comb += self.uart.cts_i.eq(1)
            comb += self.uart.dsr_i.eq(1)
            comb += self.uart.ri_i.eq(0)
            comb += self.uart.dcd_i.eq(1)
            # sigh connect up the wishbone bus manually to deal with
            # the mis-match on the data
            uartbus = self.uart.bus
            comb += uartbus.adr.eq(self.cvtuartbus.adr)
            comb += uartbus.stb.eq(self.cvtuartbus.stb)
            comb += uartbus.cyc.eq(self.cvtuartbus.cyc)
            comb += uartbus.sel.eq(self.cvtuartbus.sel)
            comb += uartbus.we.eq(self.cvtuartbus.we)
            comb += uartbus.dat_w.eq(self.cvtuartbus.dat_w) # drops 8..31
            comb += self.cvtuartbus.dat_r.eq(uartbus.dat_r) # drops 8..31
            comb += self.cvtuartbus.ack.eq(uartbus.ack)
            # aaand with the WB4-pipeline-to-WB3-classic mismatch, sigh
            comb += uartbus.stall.eq(uartbus.cyc & ~uartbus.ack)
            comb += self.cvtuartbus.stall.eq(uartbus.stall)
        if hasattr(self, "cpu"):
            m.submodules.intc = self.intc
            m.submodules.extcore = self.cpu
            m.submodules.dbuscvt = self.dbusdowncvt
            m.submodules.ibuscvt = self.ibusdowncvt
            # create stall sigs, assume wishbone classic
            #ibus, dbus = self.cvtibus, self.cvtdbus
            #comb += ibus.stall.eq(ibus.stb & ~ibus.ack)
            #comb += dbus.stall.eq(dbus.stb & ~dbus.ack)

        m.submodules.arbiter = self._arbiter
        m.submodules.decoder = self._decoder
        if hasattr(self, "ddrphy"):
            m.submodules.ddrphy = self.ddrphy
            m.submodules.dramcore = self.dramcore
            m.submodules.drambone = drambone = self.drambone
            # grrr, same problem with drambone: not WB4-pipe compliant
            comb += drambone.bus.stall.eq(drambone.bus.cyc & ~drambone.bus.ack)

        # add hyperram module
        if hasattr(self, "hyperram"):
            m.submodules.hyperram = hyperram = self.hyperram
            # grrr, same problem with hyperram: not WB4-pipe compliant
            comb += hyperram.bus.stall.eq(hyperram.bus.cyc & ~hyperram.bus.ack)
            # set 3 top CSn lines to zero for now
            if self.fpga == 'arty_a7':
                comb += hyperram.phy.rst_n.eq(ResetSignal())

        # add blinky lights so we know FPGA is alive
        if platform is not None:
            m.submodules.blinky = Blinky()

        # connect the arbiter (of wishbone masters)
        # to the decoder (addressing wishbone slaves)
        comb += self._arbiter.bus.connect(self._decoder.bus)

        if hasattr(self, "cpu"):
            # wire up the CPU interrupts
            comb += self.cpu.irq.eq(self.intc.ip)

        if platform is None:
            return m

        # add uart16550 verilog source. assumes a directory
        # structure where ls2 has been checked out in a common
        # subdirectory as:
        # git clone https://github.com/freecores/uart16550
        opencores_16550 = "../../uart16550/rtl/verilog"
        pth = os.path.split(__file__)[0]
        pth = os.path.join(pth, opencores_16550)
        fname = os.path.abspath(pth)
        print (fname)
        self.uart.add_verilog_source(fname, platform)

        if hasattr(self, "spi0"):
            # add spi submodule
            m.submodules.spi0 = spi = self.spi0
            # gonna drive me nuts, this.
            comb += spi.bus.stall.eq(spi.bus.cyc & ~spi.bus.ack)
            comb += spi.cfg_bus.stall.eq(spi.cfg_bus.cyc & ~spi.cfg_bus.ack)

            # add Tercel verilog source. assumes a directory structure where
            # microwatt has been checked out in a common subdirectory with:
            # git clone https://git.libre-soc.org/git/microwatt.git tercel-qspi
            # git checkout 882ace781e4
            raptor_tercel = "../../tercel-qspi/tercel"
            pth = os.path.split(__file__)[0]
            pth = os.path.join(pth, raptor_tercel)
            fname = os.path.abspath(pth)
            print (fname)
            self.spi0.add_verilog_source(fname, platform)

        if hasattr(self, "eth0"):
            # add ethernet submodule
            m.submodules.eth0 = ethmac = self.eth0

            # add EthMAC verilog source. assumes a directory
            # structure where the opencores ethmac has been checked out
            # in a common subdirectory as:
            # git clone https://github.com/freecores/ethmac
            opencores_ethmac = "../../ethmac/rtl/verilog"
            pth = os.path.split(__file__)[0]
            pth = os.path.join(pth, opencores_ethmac)
            fname = os.path.abspath(pth)
            print (fname)
            self.eth0.add_verilog_source(fname, platform)

        # add the main core
        pth = os.path.split(__file__)[0]
        pth = os.path.join(pth, '../external_core_top.v')
        fname = os.path.abspath(pth)
        with open(fname) as f:
            platform.add_file(fname, f)

        return m

    def ports(self):
        # puzzlingly the only IO ports needed are peripheral pins,
        # and at the moment that's just UART tx/rx.
        ports = []
        ports += [self.uart.tx_o, self.uart.rx_i]
        if hasattr(self, "hyperram"):
            ports += list(self.hyperram.ports())
        if hasattr(self, "ddrphy"):
            if hasattr(self.ddrphy, "pads"): # real PHY
                ports += list(self.ddrphy.pads.fields.values())
            else: # FakePHY, get at the dfii pads, stops deletion of nets
                for phase in self.dramcore.dfii.master.phases:
                    print ("dfi master", phase)
                    ports += list(phase.fields.values())
                for phase in self.dramcore.dfii.slave.phases:
                    print ("dfi master", phase)
                    ports += list(phase.fields.values())
                for phase in self.dramcore.dfii._inti.phases:
                    print ("dfi master", phase)
                    ports += list(phase.fields.values())
        ports += [ClockSignal(), ResetSignal()]
        return ports

def build_platform(fpga, firmware):

    # create a platform selected from the toolchain. 
    platform_kls =  {'versa_ecp5': VersaECP5Platform,
                     'versa_ecp5_85': VersaECP5Platform85,
                     'ulx3s': ULX3S_85F_Platform,
                     'arty_a7': ArtyA7_100Platform,
                     'isim': IcarusVersaPlatform,
                     'sim': None,
                    }[fpga]
    toolchain = {'arty_a7': "yosys_nextpnr",
                 'versa_ecp5': 'Trellis',
                 'versa_ecp5_85': 'Trellis',
                 'isim': 'Trellis',
                 'ulx3s': 'Trellis',
                 'sim': None,
                }.get(fpga, None)
    dram_cls = {'arty_a7': None,
                 'versa_ecp5': MT41K64M16,
                 'versa_ecp5_85': MT41K64M16,
                 #'versa_ecp5': MT41K256M16,
                 'ulx3s': None,
                 'sim': MT41K256M16,
                 'isim': MT41K64M16,
                }.get(fpga, None)
    if platform_kls is not None:
        platform = platform_kls(toolchain=toolchain)
        if fpga == 'versa_ecp5_85':
            platform.speed = "7" # HACK. speed grade 7, sigh
    else:
        platform = None

    print ("platform", fpga, firmware, platform)

    # set clock frequency
    clk_freq = 70e6
    if fpga == 'sim':
        clk_freq = 100e6
    if fpga == 'isim':
        clk_freq = 50e6 # below 50 mhz, stops DRAM being enabled
    if fpga == 'versa_ecp5':
        clk_freq = 50e6 # crank right down to test hyperram
    if fpga == 'versa_ecp5_85':
        clk_freq = 55e6
    if fpga == 'arty_a7':
        clk_freq = 50e6
    if fpga == 'ulx3s':
        clk_freq = 40.0e6

    # select a firmware address
    fw_addr = None
    if firmware is not None:
        fw_addr = 0x0000_0000

    print ("fpga", fpga, "firmware", firmware)

    # get UART resource pins
    if platform is not None:
        uart_pins = platform.request("uart", 0)
    else:
        uart_pins = Record([('tx', 1), ('rx', 1)], name="uart_0")

    # get DDR resource pins, disable if clock frequency is below 50 mhz for now
    ddr_pins = None
    if (clk_freq > 50e6 and platform is not None and
        fpga in ['versa_ecp5', 'versa_ecp5_85', 'arty_a7', 'isim']):
        ddr_pins = platform.request("ddr3", 0,
                                    dir={"dq":"-", "dqs":"-"},
                                    xdr={"rst": 4, "clk":4, "a":4,
                                         "ba":4, "clk_en":4,
                                         "odt":4, "ras":4, "cas":4, "we":4,
                                         "cs": 4})

    # Get SPI resource pins
    spi_0_pins = None
    if platform is not None and \
       fpga in ['versa_ecp5', 'versa_ecp5_85', 'isim']:
        # Override here to get FlashResource out of the way and enable Tercel
        # direct access to the SPI flash.
        # each pin needs a separate direction control
        spi_0_ios = [
            Resource("spi_0", 0,
                     Subsignal("dq0",   Pins("W2", dir="io")),
                     Subsignal("dq1",   Pins("V2", dir="io")),
                     Subsignal("dq2",   Pins("Y2", dir="io")),
                     Subsignal("dq3",   Pins("W1", dir="io")),
                     Subsignal("cs_n", Pins("R2", dir="o")),
                     Attrs(PULLMODE="NONE", DRIVE="4", IO_TYPE="LVCMOS33"))
        ]
        platform.add_resources(spi_0_ios)
        spi_0_pins = platform.request("spi_0", 0, dir={"cs_n":"o"},
                                                  xdr={"dq0":1, "dq1": 1,
                                                       "dq2":1, "dq3": 1,
                                                       "cs_n":0})

    if platform is not None and \
       fpga in ['arty_a7']:
        # each pin needs a separate direction control
        spi_0_ios = [
            Resource("spi_0", 0,
                     Subsignal("dq0",  Pins("K17", dir="io")),
                     Subsignal("dq1",  Pins("K18", dir="io")),
                     Subsignal("dq2",  Pins("L14", dir="io")),
                     Subsignal("dq3",  Pins("M14", dir="io")),
                     Subsignal("cs_n", Pins("L13", dir="o")),
                     Subsignal("clk",  Pins("L16", dir="o")),
                     Attrs(PULLMODE="NONE", DRIVE="4", IO_TYPE="LVCMOS33"))
        ]
        platform.add_resources(spi_0_ios)
        spi_0_pins = platform.request("spi_0", 0)

    print ("spiflash pins", spi_0_pins)

    # Get Ethernet RMII resource pins
    ethmac_0_pins = None
    if False and platform is not None and \
       fpga in ['versa_ecp5', 'versa_ecp5_85', 'isim']:
        # Mainly on X3 connector, MDIO on X4 due to lack of pins
        ethmac_0_ios = [
            Resource("ethmac_0", 0,
                     Subsignal("mtx_clk",   Pins("B19", dir="i")),
                     Subsignal("mtxd",      Pins("B12 B9 E6 D6", dir="o")),
                     Subsignal("mtxen",     Pins("E7", dir="o")),
                     Subsignal("mtxerr",    Pins("D7", dir="o")),
                     Subsignal("mrx_clk",   Pins("B11", dir="i")),
                     Subsignal("mrxd",      Pins("B6 E9 D9 B8", dir="i")),
                     Subsignal("mrxdv",     Pins("C8", dir="i")),
                     Subsignal("mrxerr",    Pins("D8", dir="i")),
                     Subsignal("mcoll",     Pins("E8", dir="i")),
                     Subsignal("mcrs",      Pins("C7", dir="i")),
                     Subsignal("mdc",       Pins("B18", dir="o")),
                     Subsignal("md",        Pins("A18", dir="io")),
                     Attrs(PULLMODE="NONE", DRIVE="8", SLEWRATE="FAST",
                           IO_TYPE="LVCMOS33"))
        ]
        platform.add_resources(ethmac_0_ios)
        ethmac_0_pins = platform.request("ethmac_0", 0,
                                        dir={"mtx_clk":"i", "mtxd":"o",
                                             "mtxen":"o",
                                             "mtxerr":"o", "mrx_clk":"i", 
                                             "mrxd":"i",
                                             "mrxdv":"i", "mrxerr":"i", 
                                             "mcoll":"i",
                                             "mcrs":"i", "mdc":"o", "md":"io"},
                                        xdr={"mtx_clk": 0, "mtxd": 0, 
                                             "mtxen": 0,
                                             "mtxerr": 0, "mrx_clk": 0, 
                                             "mrxd": 0,
                                             "mrxdv": 0, "mrxerr": 0, 
                                             "mcoll": 0,
                                             "mcrs": 0, "mdc": 0, "md": 0})
    print ("ethmac pins", ethmac_0_pins)

    # Get HyperRAM pins
    hyperram_pins = None
    if platform is None:
        hyperram_pins = HyperRAMPads()
    elif fpga in ['isim']:
        hyperram_ios = HyperRAMResource(0, cs_n="V12 V14 U12 U14",
                                        dq="D4 D3 F4 F3 G2 H2 D2 E2",
                                        rwds="U13", rst_n="T13", ck_p="V10",
                                        # ck_n="V11" - for later (DDR)
                                        attrs=Attrs(IOSTANDARD="LVCMOS33"))
        platform.add_resources(hyperram_ios)
        hyperram_pins = platform.request("hyperram")
        print ("isim a7 hyperram", hyperram_ios)
    # Digilent Arty A7-100t
    elif platform is not None and fpga in ['arty_a7']:
        hyperram_ios = HyperRAMResource(0, cs_n="V12 V14 U12 U14",
                                        dq="D4 D3 F4 F3 G2 H2 D2 E2",
                                        rwds="U13", rst_n="T13", ck_p="V10",
                                        # ck_n="V11" - for later (DDR)
                                        attrs=Attrs(IOSTANDARD="LVCMOS33"))
        platform.add_resources(hyperram_ios)
        hyperram_pins = platform.request("hyperram")
        print ("arty a7 hyperram", hyperram_ios)
    # VERSA ECP5
    elif platform is not None and fpga in ['versa_ecp5', 'versa_ecp5_85']:
        hyperram_ios = HyperRAMResource(0, cs_n="B13",
                                        dq="E14 C10 B10 E12 D12 A9 D11 D14",
                                        rwds="C14", rst_n="E13", ck_p="D13",
                                        attrs=Attrs(IO_TYPE="LVCMOS33"))
        platform.add_resources(hyperram_ios)
        hyperram_pins = platform.request("hyperram")
        print ("versa ecp5 hyperram", hyperram_ios)
    print ("hyperram pins", hyperram_pins)

    # set up the SOC
    soc = DDR3SoC(fpga=fpga, dram_cls=dram_cls,
                  # check microwatt_soc.h for these
                  ddrphy_addr=0xff000000,   # DRAM_INIT_BASE firmware base
                  dramcore_addr=0xc8000000, # DRAM_CTRL_BASE
                  ddr_addr=0x40000000,      # DRAM_BASE
                  spi0_addr=0x10000000,     # SPI0_BASE
                  spi0_cfg_addr=0xc0003000, # SPI0_CTRL_BASE
                  eth0_cfg_addr=0xc0004000, # ETH0_CTRL_BASE (4k)
                  eth0_irqno=0,             # ETH0_IRQ number
                  hyperram_addr=0xa0000000, # HYPERRAM_BASE
                  fw_addr=fw_addr,
                  #fw_addr=None,
                  ddr_pins=ddr_pins,
                  uart_pins=uart_pins,
                  spi_0_pins=spi_0_pins,
                  ethmac_0_pins=ethmac_0_pins,
                  hyperram_pins=hyperram_pins,
                  firmware=firmware,
                  clk_freq=clk_freq,
                  add_cpu=True)

    if toolchain == 'Trellis':
        # add -abc9 option to yosys synth_ecp5
        #os.environ['NMIGEN_synth_opts'] = '-abc9 -nowidelut'
        #os.environ['NMIGEN_synth_opts'] = '-abc9'
        os.environ['NMIGEN_synth_opts'] = '-nowidelut'

    if platform is not None:
        # build and upload it
        if fpga == 'isim':
            platform.build(soc, do_program=False,
                                do_build=True, build_dir="build_simsoc")
        else:
            platform.build(soc, do_program=True)
    else:
        # for now, generate verilog
        vl = verilog.convert(soc, ports=soc.ports())
        with open("ls2.v", "w") as f:
            f.write(vl)


# urrr this gets exec()d by the build process without arguments
# which screws up.  use the arty_a7_ls2.py etc. with no arguments
if __name__ == '__main__':
    fpga = None
    firmware = None
    if len(sys.argv) >= 2:
        fpga = sys.argv[1]
    if len(sys.argv) >= 3:
        firmware = sys.argv[2]
    build_platform(fpga, firmware)