src/soc/experiment/compalu_multi.py

   1 """Computation Unit (aka "ALU Manager").
   2
   3 Manages a Pipeline or FSM, ensuring that the start and end time are 100%
   4 monitored.  At no time may the ALU proceed without this module notifying
   5 the Dependency Matrices.  At no time is a result production "abandoned".
   6 This module blocks (indicates busy) starting from when it first receives
   7 an opcode until it receives notification that
   8 its result(s) have been successfully stored in the regfile(s)
   9
  10 Documented at http://libre-soc.org/3d_gpu/architecture/compunit
  11 """
  12
  13 from nmigen.compat.sim import run_simulation, Settle
  14 from nmigen.cli import verilog, rtlil
  15 from nmigen import Module, Signal, Mux, Elaboratable, Repl, Array, Cat, Const
  16 from nmigen.hdl.rec import (Record, DIR_FANIN, DIR_FANOUT)
  17
  18 from nmutil.latch import SRLatch, latchregister
  19 from nmutil.iocontrol import RecordObject
  20
  21 from soc.decoder.power_decoder2 import Data
  22 from soc.decoder.power_enums import InternalOp
  23 from soc.fu.regspec import RegSpec, RegSpecALUAPI
  24
  25
  26 def go_record(n, name):
  27     r = Record([('go', n, DIR_FANIN),
  28                 ('rel', n, DIR_FANOUT)], name=name)
  29     r.go.reset_less = True
  30     r.rel.reset_less = True
  31     return r
  32
  33 # see https://libre-soc.org/3d_gpu/architecture/regfile/ section on regspecs
  34
  35 class CompUnitRecord(RegSpec, RecordObject):
  36     """CompUnitRecord
  37
  38     base class for Computation Units, to provide a uniform API
  39     and allow "record.connect" etc. to be used, particularly when
  40     it comes to connecting multiple Computation Units up as a block
  41     (very laborious)
  42
  43     LDSTCompUnitRecord should derive from this class and add the
  44     additional signals it requires
  45
  46     :subkls:      the class (not an instance) needed to construct the opcode
  47     :rwid:        either an integer (specifies width of all regs) or a "regspec"
  48
  49     see https://libre-soc.org/3d_gpu/architecture/regfile/ section on regspecs
  50     """
  51     def __init__(self, subkls, rwid, n_src=None, n_dst=None, name=None):
  52         RegSpec.__init__(self, rwid, n_src, n_dst)
  53         RecordObject.__init__(self, name)
  54         self._subkls = subkls
  55         n_src, n_dst = self._n_src, self._n_dst
  56
  57         # create source operands
  58         src = []
  59         for i in range(n_src):
  60             j = i + 1 # name numbering to match src1/src2
  61             name = "src%d_i" % j
  62             rw = self._get_srcwid(i)
  63             sreg = Signal(rw, name=name, reset_less=True)
  64             setattr(self, name, sreg)
  65             src.append(sreg)
  66         self._src_i = src
  67
  68         # create dest operands
  69         dst = []
  70         for i in range(n_dst):
  71             j = i + 1 # name numbering to match dest1/2...
  72             name = "dest%d_o" % j
  73             rw = self._get_dstwid(i)
  74             dreg = Signal(rw, name=name, reset_less=True)
  75             setattr(self, name, dreg)
  76             dst.append(dreg)
  77         self._dest = dst
  78
  79         # operation / data input
  80         self.oper_i = subkls(name="oper_i") # operand
  81
  82         # create read/write and other scoreboard signalling
  83         self.rd = go_record(n_src, name="rd") # read in, req out
  84         self.wr = go_record(n_dst, name="wr") # write in, req out
  85         self.issue_i = Signal(reset_less=True) # fn issue in
  86         self.shadown_i = Signal(reset=1) # shadow function, defaults to ON
  87         self.go_die_i = Signal() # go die (reset)
  88
  89         # output (busy/done)
  90         self.busy_o = Signal(reset_less=True) # fn busy out
  91         self.done_o = Signal(reset_less=True)
  92
  93
  94 class MultiCompUnit(RegSpecALUAPI, Elaboratable):
  95     def __init__(self, rwid, alu, opsubsetkls, n_src=2, n_dst=1):
  96         """MultiCompUnit
  97
  98         * :rwid:        width of register latches (TODO: allocate per regspec)
  99         * :alu:         ALU (pipeline, FSM) - must conform to nmutil Pipe API
 100         * :opsubsetkls: subset of Decode2ExecuteType
 101         * :n_src:       number of src operands
 102         * :n_dst:       number of destination operands
 103         """
 104         RegSpecALUAPI.__init__(self, rwid, alu)
 105         self.opsubsetkls = opsubsetkls
 106         self.cu = cu = CompUnitRecord(opsubsetkls, rwid, n_src, n_dst)
 107         n_src, n_dst = self.n_src, self.n_dst = cu._n_src, cu._n_dst
 108         print ("n_src %d n_dst %d" % (self.n_src, self.n_dst))
 109
 110         # convenience names for src operands
 111         for i in range(n_src):
 112             j = i + 1 # name numbering to match src1/src2
 113             name = "src%d_i" % j
 114             setattr(self, name, getattr(cu, name))
 115
 116         # convenience names for dest operands
 117         for i in range(n_dst):
 118             j = i + 1 # name numbering to match dest1/2...
 119             name = "dest%d_o" % j
 120             setattr(self, name, getattr(cu, name))
 121
 122         # more convenience names
 123         self.rd = cu.rd
 124         self.wr = cu.wr
 125         self.go_rd_i = self.rd.go # temporary naming
 126         self.go_wr_i = self.wr.go # temporary naming
 127         self.rd_rel_o = self.rd.rel # temporary naming
 128         self.req_rel_o = self.wr.rel # temporary naming
 129         self.issue_i = cu.issue_i
 130         self.shadown_i = cu.shadown_i
 131         self.go_die_i = cu.go_die_i
 132
 133         # operation / data input
 134         self.oper_i = cu.oper_i
 135         self.src_i = cu._src_i
 136
 137         self.busy_o = cu.busy_o
 138         self.dest = cu._dest
 139         self.data_o = self.dest[0] # Dest out
 140         self.done_o = cu.done_o
 141
 142
 143     def _mux_op(self, m, sl, op_is_imm, imm, i):
 144         # select imm if opcode says so. however also change the latch
 145         # to trigger *from* the opcode latch instead.
 146         src_or_imm = Signal(self.cu._get_srcwid(i), reset_less=True)
 147         src_sel = Signal(reset_less=True)
 148         m.d.comb += src_sel.eq(Mux(op_is_imm, self.opc_l.q, self.src_l.q[i]))
 149         m.d.comb += src_or_imm.eq(Mux(op_is_imm, imm, self.src_i[i]))
 150         # overwrite 1st src-latch with immediate-muxed stuff
 151         sl[i][0] = src_or_imm
 152         sl[i][2] = src_sel
 153         sl[i][3] = ~op_is_imm # change rd.rel[i] gate condition
 154
 155     def elaborate(self, platform):
 156         m = Module()
 157         m.submodules.alu = self.alu
 158         m.submodules.src_l = src_l = SRLatch(False, self.n_src, name="src")
 159         m.submodules.opc_l = opc_l = SRLatch(sync=False, name="opc")
 160         m.submodules.req_l = req_l = SRLatch(False, self.n_dst, name="req")
 161         m.submodules.rst_l = rst_l = SRLatch(sync=False, name="rst")
 162         m.submodules.rok_l = rok_l = SRLatch(sync=False, name="rdok")
 163         self.opc_l, self.src_l = opc_l, src_l
 164
 165         # ALU only proceeds when all src are ready.  rd_rel_o is delayed
 166         # so combine it with go_rd_i.  if all bits are set we're good
 167         all_rd = Signal(reset_less=True)
 168         m.d.comb += all_rd.eq(self.busy_o & rok_l.q &
 169                     (((~self.rd.rel) | self.rd.go).all()))
 170
 171         # write_requests all done
 172         # req_done works because any one of the last of the writes
 173         # is enough, when combined with when read-phase is done (rst_l.q)
 174         wr_any = Signal(reset_less=True)
 175         req_done = Signal(reset_less=True)
 176         m.d.comb += self.done_o.eq(self.busy_o & ~(self.wr.rel.bool()))
 177         m.d.comb += wr_any.eq(self.wr.go.bool())
 178         m.d.comb += req_done.eq(rst_l.q & wr_any)
 179
 180         # create rising pulse from alu valid condition.
 181         alu_done = Signal(reset_less=True)
 182         alu_done_dly = Signal(reset_less=True)
 183         alu_pulse = Signal(reset_less=True)
 184         m.d.comb += alu_done.eq(self.alu.n.valid_o)
 185         m.d.sync += alu_done_dly.eq(alu_done)
 186         m.d.comb += alu_pulse.eq(alu_done & ~alu_done_dly)
 187
 188         # shadow/go_die
 189         reset = Signal(reset_less=True)
 190         rst_r = Signal(reset_less=True) # reset latch off
 191         reset_w = Signal(self.n_dst, reset_less=True)
 192         reset_r = Signal(self.n_src, reset_less=True)
 193         m.d.comb += reset.eq(req_done | self.go_die_i)
 194         m.d.comb += rst_r.eq(self.issue_i | self.go_die_i)
 195         m.d.comb += reset_w.eq(self.wr.go | Repl(self.go_die_i, self.n_dst))
 196         m.d.comb += reset_r.eq(self.rd.go | Repl(self.go_die_i, self.n_src))
 197
 198         # read-done,wr-proceed latch
 199         m.d.comb += rok_l.s.eq(self.issue_i)  # set up when issue starts
 200         m.d.comb += rok_l.r.eq(self.alu.p.ready_o) # off when ALU acknowledges
 201
 202         # wr-done, back-to-start latch
 203         m.d.comb += rst_l.s.eq(all_rd)     # set when read-phase is fully done
 204         m.d.comb += rst_l.r.eq(rst_r)        # *off* on issue
 205
 206         # opcode latch (not using go_rd_i) - inverted so that busy resets to 0
 207         m.d.sync += opc_l.s.eq(self.issue_i)       # set on issue
 208         m.d.sync += opc_l.r.eq(self.alu.n.valid_o & req_done) # reset on ALU
 209
 210         # src operand latch (not using go_wr_i)
 211         m.d.sync += src_l.s.eq(Repl(self.issue_i, self.n_src))
 212         m.d.sync += src_l.r.eq(reset_r)
 213
 214         # dest operand latch (not using issue_i)
 215         m.d.comb += req_l.s.eq(Repl(alu_pulse, self.n_dst))
 216         m.d.sync += req_l.r.eq(reset_w)
 217
 218         # create a latch/register for the operand
 219         oper_r = self.opsubsetkls(name="oper_r")
 220         latchregister(m, self.oper_i, oper_r, self.issue_i, "oper_l")
 221
 222         # and for each output from the ALU
 223         drl = []
 224         for i in range(self.n_dst):
 225             name = "data_r%d" % i
 226             data_r = Signal(self.cu._get_dstwid(i), name=name, reset_less=True)
 227             latchregister(m, self.get_out(i), data_r, req_l.q[i], name + "_l")
 228             drl.append(data_r)
 229
 230         # pass the operation to the ALU
 231         m.d.comb += self.get_op().eq(oper_r)
 232
 233         # create list of src/alu-src/src-latch.  override 1st and 2nd one below.
 234         # in the case, for ALU and Logical pipelines, we assume RB is the
 235         # 2nd operand in the input "regspec".  see for example
 236         # soc.fu.alu.pipe_data.ALUInputData
 237         sl = []
 238         print ("src_i", self.src_i)
 239         for i in range(self.n_src):
 240             sl.append([self.src_i[i], self.get_in(i), src_l.q[i], Const(1,1)])
 241
 242         # if the operand subset has "zero_a" we implicitly assume that means
 243         # src_i[0] is an INT reg type where zero can be multiplexed in, instead.
 244         # see https://bugs.libre-soc.org/show_bug.cgi?id=336
 245         if hasattr(oper_r, "zero_a"):
 246             # select zero imm if opcode says so.  however also change the latch
 247             # to trigger *from* the opcode latch instead.
 248             self._mux_op(m, sl, oper_r.zero_a, 0, 0)
 249
 250         # if the operand subset has "imm_data" we implicitly assume that means
 251         # "this is an INT ALU/Logical FU jobbie, RB is muxed with the immediate"
 252         if hasattr(oper_r, "imm_data"):
 253             # select immediate if opcode says so. however also change the latch
 254             # to trigger *from* the opcode latch instead.
 255             op_is_imm = oper_r.imm_data.imm_ok
 256             imm = oper_r.imm_data.imm
 257             self._mux_op(m, sl, op_is_imm, imm, 1)
 258
 259         # create a latch/register for src1/src2 (even if it is a copy of imm)
 260         for i in range(self.n_src):
 261             src, alusrc, latch, _ = sl[i]
 262             latchregister(m, src, alusrc, latch, name="src_r%d" % i)
 263
 264         # -----
 265         # outputs
 266         # -----
 267
 268         slg = Cat(*map(lambda x: x[3], sl)) # get req gate conditions
 269         # all request signals gated by busy_o.  prevents picker problems
 270         m.d.comb += self.busy_o.eq(opc_l.q) # busy out
 271         bro = Repl(self.busy_o, self.n_src)
 272         m.d.comb += self.rd.rel.eq(src_l.q & bro & slg) # src1/src2 req rel
 273
 274         # write-release gated by busy and by shadow
 275         brd = Repl(self.busy_o & self.shadown_i, self.n_dst)
 276         m.d.comb += self.wr.rel.eq(req_l.q & brd)
 277
 278         # on a go_read, tell the ALU we're accepting data.
 279         # NOTE: this spells TROUBLE if the ALU isn't ready!
 280         # go_read is only valid for one clock!
 281         with m.If(all_rd):                           # src operands ready, GO!
 282             with m.If(~self.alu.p.ready_o):          # no ACK yet
 283                 m.d.comb += self.alu.p.valid_i.eq(1) # so indicate valid
 284
 285         brd = Repl(self.busy_o & self.shadown_i, self.n_dst)
 286         # only proceed if ALU says its output is valid
 287         with m.If(self.alu.n.valid_o):
 288             # when output latch is ready, and ALU says ready, accept ALU output
 289             with m.If(reset):
 290                 m.d.comb += self.alu.n.ready_i.eq(1) # tells ALU "got it"
 291
 292         # output the data from the latch on go_write
 293         for i in range(self.n_dst):
 294             with m.If(self.wr.go[i]):
 295                 m.d.comb += self.dest[i].eq(drl[i])
 296
 297         return m
 298
 299     def __iter__(self):
 300         yield self.rd.go
 301         yield self.wr.go
 302         yield self.issue_i
 303         yield self.shadown_i
 304         yield self.go_die_i
 305         yield from self.oper_i.ports()
 306         yield self.src1_i
 307         yield self.src2_i
 308         yield self.busy_o
 309         yield self.rd.rel
 310         yield self.wr.rel
 311         yield self.data_o
 312
 313     def ports(self):
 314         return list(self)
 315
 316
 317 def op_sim(dut, a, b, op, inv_a=0, imm=0, imm_ok=0, zero_a=0):
 318     yield dut.issue_i.eq(0)
 319     yield
 320     yield dut.src_i[0].eq(a)
 321     yield dut.src_i[1].eq(b)
 322     yield dut.oper_i.insn_type.eq(op)
 323     yield dut.oper_i.invert_a.eq(inv_a)
 324     yield dut.oper_i.imm_data.imm.eq(imm)
 325     yield dut.oper_i.imm_data.imm_ok.eq(imm_ok)
 326     yield dut.oper_i.zero_a.eq(zero_a)
 327     yield dut.issue_i.eq(1)
 328     yield
 329     yield dut.issue_i.eq(0)
 330     yield
 331     if not imm_ok or not zero_a:
 332         yield dut.rd.go.eq(0b11)
 333         while True:
 334             yield
 335             rd_rel_o = yield dut.rd.rel
 336             print ("rd_rel", rd_rel_o)
 337             if rd_rel_o:
 338                 break
 339         yield dut.rd.go.eq(0)
 340     if len(dut.src_i) == 3:
 341         yield dut.rd.go.eq(0b100)
 342         while True:
 343             yield
 344             rd_rel_o = yield dut.rd.rel
 345             print ("rd_rel", rd_rel_o)
 346             if rd_rel_o:
 347                 break
 348         yield dut.rd.go.eq(0)
 349
 350     req_rel_o = yield dut.wr.rel
 351     result = yield dut.data_o
 352     print ("req_rel", req_rel_o, result)
 353     while True:
 354         req_rel_o = yield dut.wr.rel
 355         result = yield dut.data_o
 356         print ("req_rel", req_rel_o, result)
 357         if req_rel_o:
 358             break
 359         yield
 360     yield dut.wr.go[0].eq(1)
 361     yield
 362     result = yield dut.data_o
 363     print ("result", result)
 364     yield dut.wr.go[0].eq(0)
 365     yield
 366     return result
 367
 368
 369 def scoreboard_sim_dummy(dut):
 370     result = yield from op_sim(dut, 5, 2, InternalOp.OP_NOP, inv_a=0,
 371                                     imm=8, imm_ok=1)
 372     assert result == 5, result
 373
 374     result = yield from op_sim(dut, 9, 2, InternalOp.OP_NOP, inv_a=0,
 375                                     imm=8, imm_ok=1)
 376     assert result == 9, result
 377
 378
 379 def scoreboard_sim(dut):
 380     result = yield from op_sim(dut, 5, 2, InternalOp.OP_ADD, inv_a=0,
 381                                     imm=8, imm_ok=1)
 382     assert result == 13
 383
 384     result = yield from op_sim(dut, 5, 2, InternalOp.OP_ADD)
 385     assert result == 7
 386
 387     result = yield from op_sim(dut, 5, 2, InternalOp.OP_ADD, inv_a=1)
 388     assert result == 65532
 389
 390     result = yield from op_sim(dut, 5, 2, InternalOp.OP_ADD, zero_a=1,
 391                                     imm=8, imm_ok=1)
 392     assert result == 8
 393
 394     result = yield from op_sim(dut, 5, 2, InternalOp.OP_ADD, zero_a=1)
 395     assert result == 2
 396
 397
 398 def test_compunit():
 399     from alu_hier import ALU
 400     from soc.fu.alu.alu_input_record import CompALUOpSubset
 401
 402     m = Module()
 403     alu = ALU(16)
 404     dut = MultiCompUnit(16, alu, CompALUOpSubset)
 405     m.submodules.cu = dut
 406
 407     vl = rtlil.convert(dut, ports=dut.ports())
 408     with open("test_compunit1.il", "w") as f:
 409         f.write(vl)
 410
 411     run_simulation(m, scoreboard_sim(dut), vcd_name='test_compunit1.vcd')
 412
 413
 414 class CompUnitParallelTest:
 415     def __init__(self, dut):
 416         self.dut = dut
 417
 418         # Operation cycle should not take longer than this:
 419         self.MAX_BUSY_WAIT = 50
 420
 421         # Minimum duration in which issue_i will be kept inactive,
 422         # during which busy_o must remain low.
 423         self.MIN_BUSY_LOW = 5
 424
 425         # Number of cycles to stall until the assertion of go.
 426         # One value, for each port. Can be zero, for no delay.
 427         self.RD_GO_DELAY = [0, 3]
 428
 429         # store common data for the input operation of the processes
 430         # input operation:
 431         self.op = 0
 432         self.inv_a = self.zero_a = 0
 433         self.imm = self.imm_ok = 0
 434         # input data:
 435         self.a = self.b = 0
 436
 437     def driver(self):
 438         print("Begin parallel test.")
 439         yield from self.operation(5, 2, InternalOp.OP_ADD, inv_a=0,
 440                                   imm=8, imm_ok=1)
 441
 442     def operation(self, a, b, op, inv_a=0, imm=0, imm_ok=0, zero_a=0):
 443         # store data for the operation
 444         self.a = a
 445         self.b = b
 446         self.op = op
 447         self.inv_a = inv_a
 448         self.imm = imm
 449         self.imm_ok = imm_ok
 450         self.zero_a = zero_a
 451
 452         # trigger operation cycle
 453         yield from self.issue()
 454
 455     def issue(self):
 456         # issue_i starts inactive
 457         yield self.dut.issue_i.eq(0)
 458
 459         for n in range(self.MIN_BUSY_LOW):
 460             yield
 461             # busy_o must remain inactive. It cannot rise on its own.
 462             busy_o = yield self.dut.busy_o
 463             assert not busy_o
 464
 465         # activate issue_i to begin the operation cycle
 466         yield self.dut.issue_i.eq(1)
 467
 468         # at the same time, present the operation
 469         yield self.dut.oper_i.insn_type.eq(self.op)
 470         yield self.dut.oper_i.invert_a.eq(self.inv_a)
 471         yield self.dut.oper_i.imm_data.imm.eq(self.imm)
 472         yield self.dut.oper_i.imm_data.imm_ok.eq(self.imm_ok)
 473         yield self.dut.oper_i.zero_a.eq(self.zero_a)
 474
 475         # give one cycle for the CompUnit to latch the data
 476         yield
 477
 478         # busy_o must keep being low in this cycle, because issue_i was
 479         # low on the previous cycle.
 480         # It cannot rise on its own.
 481         # Also, busy_o and issue_i must never be active at the same time, ever.
 482         busy_o = yield self.dut.busy_o
 483         assert not busy_o
 484
 485         # Lower issue_i
 486         yield self.dut.issue_i.eq(0)
 487
 488         # deactivate inputs along with issue_i, so we can be sure the data
 489         # was latched at the correct cycle
 490         yield self.dut.oper_i.insn_type.eq(0)
 491         yield self.dut.oper_i.invert_a.eq(0)
 492         yield self.dut.oper_i.imm_data.imm.eq(0)
 493         yield self.dut.oper_i.imm_data.imm_ok.eq(0)
 494         yield self.dut.oper_i.zero_a.eq(0)
 495         yield
 496
 497         # wait for busy_o to lower
 498         # timeout after self.MAX_BUSY_WAIT cycles
 499         for n in range(self.MAX_BUSY_WAIT):
 500             # sample busy_o in the current cycle
 501             busy_o = yield self.dut.busy_o
 502             if not busy_o:
 503                 # operation cycle ends when busy_o becomes inactive
 504                 break
 505             yield
 506
 507         # if busy_o is still active, a timeout has occurred
 508         # TODO: Uncomment this, once the test is complete:
 509         # assert not busy_o
 510
 511         if busy_o:
 512             print("If you are reading this, "
 513                   "it's because the above test failed, as expected,\n"
 514                   "with a timeout. It must pass, once the test is complete.")
 515             return
 516
 517         print("If you are reading this, "
 518               "it's because the above test unexpectedly passed.")
 519
 520     def rd(self, rd_idx):
 521         # wait for issue_i to rise
 522         while True:
 523             issue_i = yield self.dut.issue_i
 524             if issue_i:
 525                 break
 526             # issue_i has not risen yet, so rd must keep low
 527             rel = yield self.dut.rd.rel[rd_idx]
 528             assert not rel
 529             yield
 530
 531         # we do not want rd to rise on an immediate operand
 532         # if it is immediate, exit the process
 533         # TODO: don't exit the process, monitor rd instead to ensure it
 534         #       doesn't rise on its own
 535         if (self.zero_a and rd_idx == 0) or (self.imm_ok and rd_idx == 1):
 536             return
 537
 538         # issue_i has risen. rel must rise on the next cycle
 539         rel = yield self.dut.rd.rel[rd_idx]
 540         assert not rel
 541
 542         # stall for additional cycles. Check that rel doesn't fall on its own
 543         for n in range(self.RD_GO_DELAY[rd_idx]):
 544             yield
 545             rel = yield self.dut.rd.rel[rd_idx]
 546             assert rel
 547
 548         # Before asserting "go", make sure "rel" has risen.
 549         # The use of Settle allows "go" to be set combinatorially,
 550         # rising on the same cycle as "rel".
 551         yield Settle()
 552         rel = yield self.dut.rd.rel[rd_idx]
 553         assert rel
 554
 555         # assert go for one cycle
 556         yield self.dut.rd.go[rd_idx].eq(1)
 557         yield
 558
 559         # rel must keep high, since go was inactive in the last cycle
 560         rel = yield self.dut.rd.rel[rd_idx]
 561         assert rel
 562
 563         # finish the go one-clock pulse
 564         yield self.dut.rd.go[rd_idx].eq(0)
 565         yield
 566
 567         # rel must have gone low in response to go being high
 568         # on the previous cycle
 569         rel = yield self.dut.rd.rel[rd_idx]
 570         assert not rel
 571
 572         # TODO: also when dut.rd.go is set, put the expected value into
 573         # the src_i.  use dut.get_in[rd_idx] to do so
 574
 575     def wr(self, wr_idx):
 576         # monitor self.dut.wr.req[rd_idx] and sets dut.wr.go[idx] for one cycle
 577         yield
 578         # TODO: also when dut.wr.go is set, check the output against the
 579         # self.expected_o and assert.  use dut.get_out(wr_idx) to do so.
 580
 581     def run_simulation(self, vcd_name):
 582         run_simulation(self.dut, [self.driver(),
 583                                   self.rd(0),  # one read port (a)
 584                                   self.rd(1),  # one read port (b)
 585                                   self.wr(0),  # one write port (o)
 586                                   ],
 587                        vcd_name=vcd_name)
 588
 589
 590 def test_compunit_regspec3():
 591     from alu_hier import DummyALU
 592     from soc.fu.alu.alu_input_record import CompALUOpSubset
 593
 594     inspec = [('INT', 'a', '0:15'),
 595               ('INT', 'b', '0:15'),
 596               ('INT', 'c', '0:15')]
 597     outspec = [('INT', 'o', '0:15'),
 598               ]
 599
 600     regspec = (inspec, outspec)
 601
 602     m = Module()
 603     alu = DummyALU(16)
 604     dut = MultiCompUnit(regspec, alu, CompALUOpSubset)
 605     m.submodules.cu = dut
 606
 607     run_simulation(m, scoreboard_sim_dummy(dut),
 608                    vcd_name='test_compunit_regspec3.vcd')
 609
 610
 611 def test_compunit_regspec1():
 612     from alu_hier import ALU
 613     from soc.fu.alu.alu_input_record import CompALUOpSubset
 614
 615     inspec = [('INT', 'a', '0:15'),
 616               ('INT', 'b', '0:15')]
 617     outspec = [('INT', 'o', '0:15'),
 618               ]
 619
 620     regspec = (inspec, outspec)
 621
 622     m = Module()
 623     alu = ALU(16)
 624     dut = MultiCompUnit(regspec, alu, CompALUOpSubset)
 625     m.submodules.cu = dut
 626
 627     vl = rtlil.convert(dut, ports=dut.ports())
 628     with open("test_compunit_regspec1.il", "w") as f:
 629         f.write(vl)
 630
 631     run_simulation(m, scoreboard_sim(dut),
 632                    vcd_name='test_compunit_regspec1.vcd')
 633
 634     test = CompUnitParallelTest(dut)
 635     test.run_simulation("test_compunit_parallel.vcd")
 636
 637
 638 if __name__ == '__main__':
 639     test_compunit()
 640     test_compunit_regspec1()
 641     test_compunit_regspec3()