+#!/usr/bin/env python3
+#
+# Copyright (C) 2020,2021 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+# Copyright (C) 2020 Cole Poirier
+# Copyright (C) 2020,2021 Cesar Strauss
+# Copyright (C) 2021 Tobias Platen
+#
+# Original dcache.vhdl Copyright of its authors and licensed
+# by IBM under CC-BY 4.0
+# https://github.com/antonblanchard/microwatt
+#
+# Conversion to nmigen funded by NLnet and NGI POINTER under EU Grants
+# 871528 and 957073, under the LGPL-v3+ License
+
"""DCache
based on Anton Blanchard microwatt dcache.vhdl
* https://libre-soc.org/3d_gpu/architecture/set_associative_cache.jpg
* https://bugs.libre-soc.org/show_bug.cgi?id=469
+* https://libre-soc.org/irclog-microwatt/%23microwatt.2021-12-07.log.html
+ (discussion about brams for ECP5)
"""
from enum import Enum, unique
from nmigen import (Module, Signal, Elaboratable, Cat, Repl, Array, Const,
- Record)
+ Record, Memory)
from nmutil.util import Display
+from nmigen.lib.coding import Decoder
from copy import deepcopy
from random import randint, seed
WBIOMasterOut, WBIOSlaveOut)
from soc.experiment.cache_ram import CacheRam
-#from soc.experiment.plru import PLRU
-from nmutil.plru import PLRU
+from soc.experiment.plru import PLRU, PLRUs
+#from nmutil.plru import PLRU, PLRUs
# for test
from soc.bus.sram import SRAM
from nmutil.util import wrap
-
-# TODO: make these parameters of DCache at some point
-LINE_SIZE = 64 # Line size in bytes
-NUM_LINES = 16 # Number of lines in a set
-NUM_WAYS = 4 # Number of ways
-TLB_SET_SIZE = 64 # L1 DTLB entries per set
-TLB_NUM_WAYS = 2 # L1 DTLB number of sets
-TLB_LG_PGSZ = 12 # L1 DTLB log_2(page_size)
LOG_LENGTH = 0 # Non-zero to enable log data collection
-# BRAM organisation: We never access more than
-# -- WB_DATA_BITS at a time so to save
-# -- resources we make the array only that wide, and
-# -- use consecutive indices to make a cache "line"
-# --
-# -- ROW_SIZE is the width in bytes of the BRAM
-# -- (based on WB, so 64-bits)
-ROW_SIZE = WB_DATA_BITS // 8;
-
-# ROW_PER_LINE is the number of row (wishbone
-# transactions) in a line
-ROW_PER_LINE = LINE_SIZE // ROW_SIZE
-
-# BRAM_ROWS is the number of rows in BRAM needed
-# to represent the full dcache
-BRAM_ROWS = NUM_LINES * ROW_PER_LINE
-
-print ("ROW_SIZE", ROW_SIZE)
-print ("ROW_PER_LINE", ROW_PER_LINE)
-print ("BRAM_ROWS", BRAM_ROWS)
-print ("NUM_WAYS", NUM_WAYS)
-
-# Bit fields counts in the address
-
-# REAL_ADDR_BITS is the number of real address
-# bits that we store
-REAL_ADDR_BITS = 56
-
-# ROW_BITS is the number of bits to select a row
-ROW_BITS = log2_int(BRAM_ROWS)
-
-# ROW_LINE_BITS is the number of bits to select
-# a row within a line
-ROW_LINE_BITS = log2_int(ROW_PER_LINE)
-
-# LINE_OFF_BITS is the number of bits for
-# the offset in a cache line
-LINE_OFF_BITS = log2_int(LINE_SIZE)
-
-# ROW_OFF_BITS is the number of bits for
-# the offset in a row
-ROW_OFF_BITS = log2_int(ROW_SIZE)
-
-# INDEX_BITS is the number if bits to
-# select a cache line
-INDEX_BITS = log2_int(NUM_LINES)
-
-# SET_SIZE_BITS is the log base 2 of the set size
-SET_SIZE_BITS = LINE_OFF_BITS + INDEX_BITS
-
-# TAG_BITS is the number of bits of
-# the tag part of the address
-TAG_BITS = REAL_ADDR_BITS - SET_SIZE_BITS
-
-# TAG_WIDTH is the width in bits of each way of the tag RAM
-TAG_WIDTH = TAG_BITS + 7 - ((TAG_BITS + 7) % 8)
-
-# WAY_BITS is the number of bits to select a way
-WAY_BITS = log2_int(NUM_WAYS)
-
-# Example of layout for 32 lines of 64 bytes:
-layout = """\
- .. tag |index| line |
- .. | row | |
- .. | |---| | ROW_LINE_BITS (3)
- .. | |--- - --| LINE_OFF_BITS (6)
- .. | |- --| ROW_OFF_BITS (3)
- .. |----- ---| | ROW_BITS (8)
- .. |-----| | INDEX_BITS (5)
- .. --------| | TAG_BITS (45)
-"""
-print (layout)
-print ("Dcache TAG %d IDX %d ROW_BITS %d ROFF %d LOFF %d RLB %d" % \
- (TAG_BITS, INDEX_BITS, ROW_BITS,
- ROW_OFF_BITS, LINE_OFF_BITS, ROW_LINE_BITS))
-print ("index @: %d-%d" % (LINE_OFF_BITS, SET_SIZE_BITS))
-print ("row @: %d-%d" % (LINE_OFF_BITS, ROW_OFF_BITS))
-print ("tag @: %d-%d width %d" % (SET_SIZE_BITS, REAL_ADDR_BITS, TAG_WIDTH))
-
-TAG_RAM_WIDTH = TAG_WIDTH * NUM_WAYS
-
-print ("TAG_RAM_WIDTH", TAG_RAM_WIDTH)
-
-def CacheTagArray():
- tag_layout = [('valid', 1),
- ('tag', TAG_RAM_WIDTH),
- ]
- return Array(Record(tag_layout, name="tag%d" % x) for x in range(NUM_LINES))
-
-def RowPerLineValidArray():
- return Array(Signal(name="rows_valid%d" % x) \
- for x in range(ROW_PER_LINE))
-
-# L1 TLB
-TLB_SET_BITS = log2_int(TLB_SET_SIZE)
-TLB_WAY_BITS = log2_int(TLB_NUM_WAYS)
-TLB_EA_TAG_BITS = 64 - (TLB_LG_PGSZ + TLB_SET_BITS)
-TLB_TAG_WAY_BITS = TLB_NUM_WAYS * TLB_EA_TAG_BITS
-TLB_PTE_BITS = 64
-TLB_PTE_WAY_BITS = TLB_NUM_WAYS * TLB_PTE_BITS;
-
def ispow2(x):
return (1<<log2_int(x, False)) == x
-assert (LINE_SIZE % ROW_SIZE) == 0, "LINE_SIZE not multiple of ROW_SIZE"
-assert ispow2(LINE_SIZE), "LINE_SIZE not power of 2"
-assert ispow2(NUM_LINES), "NUM_LINES not power of 2"
-assert ispow2(ROW_PER_LINE), "ROW_PER_LINE not power of 2"
-assert ROW_BITS == (INDEX_BITS + ROW_LINE_BITS), "geometry bits don't add up"
-assert (LINE_OFF_BITS == ROW_OFF_BITS + ROW_LINE_BITS), \
- "geometry bits don't add up"
-assert REAL_ADDR_BITS == (TAG_BITS + INDEX_BITS + LINE_OFF_BITS), \
- "geometry bits don't add up"
-assert REAL_ADDR_BITS == (TAG_BITS + ROW_BITS + ROW_OFF_BITS), \
- "geometry bits don't add up"
-assert 64 == WB_DATA_BITS, "Can't yet handle wb width that isn't 64-bits"
-assert SET_SIZE_BITS <= TLB_LG_PGSZ, "Set indexed by virtual address"
-
-def TLBHit(name):
- return Record([('valid', 1),
- ('way', TLB_WAY_BITS)], name=name)
-
-def TLBTagEAArray():
- return Array(Signal(TLB_EA_TAG_BITS, name="tlbtagea%d" % x) \
- for x in range (TLB_NUM_WAYS))
-
-def TLBRecord(name):
- tlb_layout = [('valid', TLB_NUM_WAYS),
- ('tag', TLB_TAG_WAY_BITS),
- ('pte', TLB_PTE_WAY_BITS)
- ]
- return Record(tlb_layout, name=name)
-
-def TLBArray():
- return Array(TLBRecord(name="tlb%d" % x) for x in range(TLB_SET_SIZE))
-
-def HitWaySet():
- return Array(Signal(WAY_BITS, name="hitway_%d" % x) \
- for x in range(TLB_NUM_WAYS))
-
-# Cache RAM interface
-def CacheRamOut():
- return Array(Signal(WB_DATA_BITS, name="cache_out%d" % x) \
- for x in range(NUM_WAYS))
-
-# PLRU output interface
-def PLRUOut():
- return Array(Signal(WAY_BITS, name="plru_out%d" % x) \
- for x in range(NUM_LINES))
-
-# TLB PLRU output interface
-def TLBPLRUOut():
- return Array(Signal(TLB_WAY_BITS, name="tlbplru_out%d" % x) \
- for x in range(TLB_SET_SIZE))
-
-# Helper functions to decode incoming requests
-#
-# Return the cache line index (tag index) for an address
-def get_index(addr):
- return addr[LINE_OFF_BITS:SET_SIZE_BITS]
-# Return the cache row index (data memory) for an address
-def get_row(addr):
- return addr[ROW_OFF_BITS:SET_SIZE_BITS]
+class DCacheConfig:
+ def __init__(self, LINE_SIZE = 64, # Line size in bytes
+ NUM_LINES = 64, # Number of lines in a set
+ NUM_WAYS = 2, # Number of ways
+ TLB_SET_SIZE = 64, # L1 DTLB entries per set
+ TLB_NUM_WAYS = 2, # L1 DTLB number of sets
+ TLB_LG_PGSZ = 12): # L1 DTLB log_2(page_size)
+ self.LINE_SIZE = LINE_SIZE
+ self.NUM_LINES = NUM_LINES
+ self.NUM_WAYS = NUM_WAYS
+ self.TLB_SET_SIZE = TLB_SET_SIZE
+ self.TLB_NUM_WAYS = TLB_NUM_WAYS
+ self.TLB_LG_PGSZ = TLB_LG_PGSZ
+
+ # BRAM organisation: We never access more than
+ # -- WB_DATA_BITS at a time so to save
+ # -- resources we make the array only that wide, and
+ # -- use consecutive indices to make a cache "line"
+ # --
+ # -- ROW_SIZE is the width in bytes of the BRAM
+ # -- (based on WB, so 64-bits)
+ self.ROW_SIZE = WB_DATA_BITS // 8;
+
+ # ROW_PER_LINE is the number of row (wishbone
+ # transactions) in a line
+ self.ROW_PER_LINE = self.LINE_SIZE // self.ROW_SIZE
+
+ # BRAM_ROWS is the number of rows in BRAM needed
+ # to represent the full dcache
+ self.BRAM_ROWS = self.NUM_LINES * self.ROW_PER_LINE
+
+ print ("ROW_SIZE", self.ROW_SIZE)
+ print ("ROW_PER_LINE", self.ROW_PER_LINE)
+ print ("BRAM_ROWS", self.BRAM_ROWS)
+ print ("NUM_WAYS", self.NUM_WAYS)
+
+ # Bit fields counts in the address
+
+ # REAL_ADDR_BITS is the number of real address
+ # bits that we store
+ self.REAL_ADDR_BITS = 56
+
+ # ROW_BITS is the number of bits to select a row
+ self.ROW_BITS = log2_int(self.BRAM_ROWS)
+
+ # ROW_LINE_BITS is the number of bits to select
+ # a row within a line
+ self.ROW_LINE_BITS = log2_int(self.ROW_PER_LINE)
+
+ # LINE_OFF_BITS is the number of bits for
+ # the offset in a cache line
+ self.LINE_OFF_BITS = log2_int(self.LINE_SIZE)
+
+ # ROW_OFF_BITS is the number of bits for
+ # the offset in a row
+ self.ROW_OFF_BITS = log2_int(self.ROW_SIZE)
+
+ # INDEX_BITS is the number if bits to
+ # select a cache line
+ self.INDEX_BITS = log2_int(self.NUM_LINES)
+
+ # SET_SIZE_BITS is the log base 2 of the set size
+ self.SET_SIZE_BITS = self.LINE_OFF_BITS + self.INDEX_BITS
+
+ # TAG_BITS is the number of bits of
+ # the tag part of the address
+ self.TAG_BITS = self.REAL_ADDR_BITS - self.SET_SIZE_BITS
+
+ # TAG_WIDTH is the width in bits of each way of the tag RAM
+ self.TAG_WIDTH = self.TAG_BITS + 7 - ((self.TAG_BITS + 7) % 8)
+
+ # WAY_BITS is the number of bits to select a way
+ self.WAY_BITS = log2_int(self.NUM_WAYS)
+
+ # Example of layout for 32 lines of 64 bytes:
+ layout = f"""\
+ DCache Layout:
+ |.. -----------------------| REAL_ADDR_BITS ({self.REAL_ADDR_BITS})
+ .. |--------------| SET_SIZE_BITS ({self.SET_SIZE_BITS})
+ .. tag |index| line |
+ .. | row | |
+ .. | |---| | ROW_LINE_BITS ({self.ROW_LINE_BITS})
+ .. | |--- - --| LINE_OFF_BITS ({self.LINE_OFF_BITS})
+ .. | |- --| ROW_OFF_BITS ({self.ROW_OFF_BITS})
+ .. |----- ---| | ROW_BITS ({self.ROW_BITS})
+ .. |-----| | INDEX_BITS ({self.INDEX_BITS})
+ .. --------| | TAG_BITS ({self.TAG_BITS})
+ """
+ print (layout)
+ print ("Dcache TAG %d IDX %d ROW_BITS %d ROFF %d LOFF %d RLB %d" % \
+ (self.TAG_BITS, self.INDEX_BITS, self.ROW_BITS,
+ self.ROW_OFF_BITS, self.LINE_OFF_BITS, self.ROW_LINE_BITS))
+ print ("index @: %d-%d" % (self.LINE_OFF_BITS, self.SET_SIZE_BITS))
+ print ("row @: %d-%d" % (self.LINE_OFF_BITS, self.ROW_OFF_BITS))
+ print ("tag @: %d-%d width %d" % (self.SET_SIZE_BITS,
+ self.REAL_ADDR_BITS, self.TAG_WIDTH))
+
+ self.TAG_RAM_WIDTH = self.TAG_WIDTH * self.NUM_WAYS
+
+ print ("TAG_RAM_WIDTH", self.TAG_RAM_WIDTH)
+ print (" TAG_WIDTH", self.TAG_WIDTH)
+ print (" NUM_WAYS", self.NUM_WAYS)
+ print (" NUM_LINES", self.NUM_LINES)
+
+ # L1 TLB
+ self.TLB_SET_BITS = log2_int(self.TLB_SET_SIZE)
+ self.TLB_WAY_BITS = log2_int(self.TLB_NUM_WAYS)
+ self.TLB_EA_TAG_BITS = 64 - (self.TLB_LG_PGSZ + self.TLB_SET_BITS)
+ self.TLB_TAG_WAY_BITS = self.TLB_NUM_WAYS * self.TLB_EA_TAG_BITS
+ self.TLB_PTE_BITS = 64
+ self.TLB_PTE_WAY_BITS = self.TLB_NUM_WAYS * self.TLB_PTE_BITS;
+
+ assert (self.LINE_SIZE % self.ROW_SIZE) == 0, \
+ "LINE_SIZE not multiple of ROW_SIZE"
+ assert ispow2(self.LINE_SIZE), "LINE_SIZE not power of 2"
+ assert ispow2(self.NUM_LINES), "NUM_LINES not power of 2"
+ assert ispow2(self.ROW_PER_LINE), "ROW_PER_LINE not power of 2"
+ assert self.ROW_BITS == \
+ (self.INDEX_BITS + self.ROW_LINE_BITS), \
+ "geometry bits don't add up"
+ assert (self.LINE_OFF_BITS == \
+ self.ROW_OFF_BITS + self.ROW_LINE_BITS), \
+ "geometry bits don't add up"
+ assert self.REAL_ADDR_BITS == \
+ (self.TAG_BITS + self.INDEX_BITS + self.LINE_OFF_BITS), \
+ "geometry bits don't add up"
+ assert self.REAL_ADDR_BITS == \
+ (self.TAG_BITS + self.ROW_BITS + self.ROW_OFF_BITS), \
+ "geometry bits don't add up"
+ assert 64 == WB_DATA_BITS, \
+ "Can't yet handle wb width that isn't 64-bits"
+ assert self.SET_SIZE_BITS <= self.TLB_LG_PGSZ, \
+ "Set indexed by virtual address"
+
+ def CacheTagArray(self):
+ return Array(Signal(self.TAG_RAM_WIDTH, name="tag%d" % x) \
+ for x in range(self.NUM_LINES))
+
+ def CacheValidsArray(self):
+ return Array(Signal(self.NUM_WAYS, name="tag_valids%d" % x)
+ for x in range(self.NUM_LINES))
+
+ def RowPerLineValidArray(self):
+ return Array(Signal(name="rows_valid%d" % x) \
+ for x in range(self.ROW_PER_LINE))
+
+ def TLBHit(self, name):
+ return Record([('valid', 1),
+ ('way', self.TLB_WAY_BITS)], name=name)
+
+ def TLBTagEAArray(self):
+ return Array(Signal(self.TLB_EA_TAG_BITS, name="tlbtagea%d" % x) \
+ for x in range (self.TLB_NUM_WAYS))
+
+ def TLBRecord(self, name):
+ tlb_layout = [('valid', self.TLB_NUM_WAYS),
+ ('tag', self.TLB_TAG_WAY_BITS),
+ ('pte', self.TLB_PTE_WAY_BITS)
+ ]
+ return Record(tlb_layout, name=name)
+
+ def TLBValidArray(self):
+ return Array(Signal(self.TLB_NUM_WAYS, name="tlb_valid%d" % x)
+ for x in range(self.TLB_SET_SIZE))
+
+ def HitWaySet(self):
+ return Array(Signal(self.WAY_BITS, name="hitway_%d" % x) \
+ for x in range(self.TLB_NUM_WAYS))
+
+ # Cache RAM interface
+ def CacheRamOut(self):
+ return Array(Signal(self.WB_DATA_BITS, name="cache_out%d" % x) \
+ for x in range(self.NUM_WAYS))
+
+ # PLRU output interface
+ def PLRUOut(self):
+ return Array(Signal(self.WAY_BITS, name="plru_out%d" % x) \
+ for x in range(self.NUM_LINES))
+
+ # TLB PLRU output interface
+ def TLBPLRUOut(self):
+ return Array(Signal(self.TLB_WAY_BITS, name="tlbplru_out%d" % x) \
+ for x in range(self.TLB_SET_SIZE))
+
+ # Helper functions to decode incoming requests
+ #
+ # Return the cache line index (tag index) for an address
+ def get_index(self, addr):
+ return addr[self.LINE_OFF_BITS:self.SET_SIZE_BITS]
+
+ # Return the cache row index (data memory) for an address
+ def get_row(self, addr):
+ return addr[self.ROW_OFF_BITS:self.SET_SIZE_BITS]
-# Return the index of a row within a line
-def get_row_of_line(row):
- return row[:ROW_BITS][:ROW_LINE_BITS]
+ # Return the index of a row within a line
+ def get_row_of_line(self, row):
+ return row[:self.ROW_BITS][:self.ROW_LINE_BITS]
-# Returns whether this is the last row of a line
-def is_last_row_addr(addr, last):
- return addr[ROW_OFF_BITS:LINE_OFF_BITS] == last
+ # Returns whether this is the last row of a line
+ def is_last_row_addr(self, addr, last):
+ return addr[self.ROW_OFF_BITS:self.LINE_OFF_BITS] == last
-# Returns whether this is the last row of a line
-def is_last_row(row, last):
- return get_row_of_line(row) == last
+ # Returns whether this is the last row of a line
+ def is_last_row(self, row, last):
+ return self.get_row_of_line(row) == last
-# Return the next row in the current cache line. We use a
-# dedicated function in order to limit the size of the
-# generated adder to be only the bits within a cache line
-# (3 bits with default settings)
-def next_row(row):
- row_v = row[0:ROW_LINE_BITS] + 1
- return Cat(row_v[:ROW_LINE_BITS], row[ROW_LINE_BITS:])
+ # Return the next row in the current cache line. We use a
+ # dedicated function in order to limit the size of the
+ # generated adder to be only the bits within a cache line
+ # (3 bits with default settings)
+ def next_row(self, row):
+ row_v = row[0:self.ROW_LINE_BITS] + 1
+ return Cat(row_v[:self.ROW_LINE_BITS], row[self.ROW_LINE_BITS:])
-# Get the tag value from the address
-def get_tag(addr):
- return addr[SET_SIZE_BITS:REAL_ADDR_BITS]
+ # Get the tag value from the address
+ def get_tag(self, addr):
+ return addr[self.SET_SIZE_BITS:self.REAL_ADDR_BITS]
-# Read a tag from a tag memory row
-def read_tag(way, tagset):
- return tagset.word_select(way, TAG_WIDTH)[:TAG_BITS]
+ # Read a tag from a tag memory row
+ def read_tag(self, way, tagset):
+ return tagset.word_select(way, self.TAG_WIDTH)[:self.TAG_BITS]
-# Read a TLB tag from a TLB tag memory row
-def read_tlb_tag(way, tags):
- return tags.word_select(way, TLB_EA_TAG_BITS)
+ # Read a TLB tag from a TLB tag memory row
+ def read_tlb_tag(self, way, tags):
+ return tags.word_select(way, self.TLB_EA_TAG_BITS)
-# Write a TLB tag to a TLB tag memory row
-def write_tlb_tag(way, tags, tag):
- return read_tlb_tag(way, tags).eq(tag)
+ # Write a TLB tag to a TLB tag memory row
+ def write_tlb_tag(self, way, tags, tag):
+ return self.read_tlb_tag(way, tags).eq(tag)
-# Read a PTE from a TLB PTE memory row
-def read_tlb_pte(way, ptes):
- return ptes.word_select(way, TLB_PTE_BITS)
+ # Read a PTE from a TLB PTE memory row
+ def read_tlb_pte(self, way, ptes):
+ return ptes.word_select(way, self.TLB_PTE_BITS)
-def write_tlb_pte(way, ptes, newpte):
- return read_tlb_pte(way, ptes).eq(newpte)
+ def write_tlb_pte(self, way, ptes, newpte):
+ return self.read_tlb_pte(way, ptes).eq(newpte)
# Record for storing permission, attribute, etc. bits from a PTE
class MemAccessRequest(RecordObject):
- def __init__(self, name=None):
+ def __init__(self, cfg, name=None):
super().__init__(name=name)
self.op = Signal(Op)
self.valid = Signal()
self.dcbz = Signal()
- self.real_addr = Signal(REAL_ADDR_BITS)
+ self.real_addr = Signal(cfg.REAL_ADDR_BITS)
self.data = Signal(64)
self.byte_sel = Signal(8)
- self.hit_way = Signal(WAY_BITS)
+ self.hit_way = Signal(cfg.WAY_BITS)
self.same_tag = Signal()
self.mmu_req = Signal()
# First stage register, contains state for stage 1 of load hits
# and for the state machine used by all other operations
class RegStage1(RecordObject):
- def __init__(self, name=None):
+ def __init__(self, cfg, name=None):
super().__init__(name=name)
# Info about the request
self.full = Signal() # have uncompleted request
self.mmu_req = Signal() # request is from MMU
- self.req = MemAccessRequest(name="reqmem")
+ self.req = MemAccessRequest(cfg, name="reqmem")
# Cache hit state
- self.hit_way = Signal(WAY_BITS)
+ self.hit_way = Signal(cfg.WAY_BITS)
self.hit_load_valid = Signal()
- self.hit_index = Signal(INDEX_BITS)
+ self.hit_index = Signal(cfg.INDEX_BITS)
self.cache_hit = Signal()
# TLB hit state
- self.tlb_hit = Signal()
- self.tlb_hit_way = Signal(TLB_WAY_BITS)
- self.tlb_hit_index = Signal(TLB_SET_BITS)
+ self.tlb_hit = cfg.TLBHit("tlb_hit")
+ self.tlb_hit_index = Signal(cfg.TLB_SET_BITS)
# 2-stage data buffer for data forwarded from writes to reads
self.forward_data1 = Signal(64)
self.forward_data2 = Signal(64)
self.forward_sel1 = Signal(8)
self.forward_valid1 = Signal()
- self.forward_way1 = Signal(WAY_BITS)
- self.forward_row1 = Signal(ROW_BITS)
+ self.forward_way1 = Signal(cfg.WAY_BITS)
+ self.forward_row1 = Signal(cfg.ROW_BITS)
self.use_forward1 = Signal()
self.forward_sel = Signal(8)
self.write_tag = Signal()
self.slow_valid = Signal()
self.wb = WBMasterOut("wb")
- self.reload_tag = Signal(TAG_BITS)
- self.store_way = Signal(WAY_BITS)
- self.store_row = Signal(ROW_BITS)
- self.store_index = Signal(INDEX_BITS)
- self.end_row_ix = Signal(ROW_LINE_BITS)
- self.rows_valid = RowPerLineValidArray()
+ self.reload_tag = Signal(cfg.TAG_BITS)
+ self.store_way = Signal(cfg.WAY_BITS)
+ self.store_row = Signal(cfg.ROW_BITS)
+ self.store_index = Signal(cfg.INDEX_BITS)
+ self.end_row_ix = Signal(cfg.ROW_LINE_BITS)
+ self.rows_valid = cfg.RowPerLineValidArray()
self.acks_pending = Signal(3)
self.inc_acks = Signal()
self.dec_acks = Signal()
# Reservation information
class Reservation(RecordObject):
- def __init__(self):
- super().__init__()
+ def __init__(self, cfg, name=None):
+ super().__init__(name=name)
self.valid = Signal()
- self.addr = Signal(64-LINE_OFF_BITS)
+ self.addr = Signal(64-cfg.LINE_OFF_BITS)
class DTLBUpdate(Elaboratable):
- def __init__(self):
+ def __init__(self, cfg):
+ self.cfg = cfg
self.tlbie = Signal()
self.tlbwe = Signal()
self.doall = Signal()
- self.updated = Signal()
- self.v_updated = Signal()
- self.tlb_hit = Signal()
- self.tlb_req_index = Signal(TLB_SET_BITS)
+ self.tlb_hit = cfg.TLBHit("tlb_hit")
+ self.tlb_req_index = Signal(cfg.TLB_SET_BITS)
- self.tlb_hit_way = Signal(TLB_WAY_BITS)
- self.tlb_tag_way = Signal(TLB_TAG_WAY_BITS)
- self.tlb_pte_way = Signal(TLB_PTE_WAY_BITS)
- self.repl_way = Signal(TLB_WAY_BITS)
- self.eatag = Signal(TLB_EA_TAG_BITS)
- self.pte_data = Signal(TLB_PTE_BITS)
+ self.repl_way = Signal(cfg.TLB_WAY_BITS)
+ self.eatag = Signal(cfg.TLB_EA_TAG_BITS)
+ self.pte_data = Signal(cfg.TLB_PTE_BITS)
- self.dv = Signal(TLB_NUM_WAYS) # tlb_way_valids_t
-
- self.tb_out = Signal(TLB_TAG_WAY_BITS) # tlb_way_tags_t
- self.db_out = Signal(TLB_NUM_WAYS) # tlb_way_valids_t
- self.pb_out = Signal(TLB_PTE_WAY_BITS) # tlb_way_ptes_t
+ # read from dtlb array
+ self.tlb_read = Signal()
+ self.tlb_read_index = Signal(cfg.TLB_SET_BITS)
+ self.tlb_way = cfg.TLBRecord("o_tlb_way")
def elaborate(self, platform):
m = Module()
comb = m.d.comb
sync = m.d.sync
-
- tagset = Signal(TLB_TAG_WAY_BITS)
- pteset = Signal(TLB_PTE_WAY_BITS)
-
- tb_out, pb_out, db_out = self.tb_out, self.pb_out, self.db_out
- comb += db_out.eq(self.dv)
+ cfg = self.cfg
+
+ # there are 3 parts to this:
+ # QTY TLB_NUM_WAYs TAGs - of width (say) 46 bits of Effective Address
+ # QTY TLB_NUM_WAYs PTEs - of width (say) 64 bits
+ # "Valid" bits, one per "way", of QTY TLB_NUM_WAYs. these cannot
+ # be a Memory because they can all be cleared (tlbie, doall), i mean,
+ # we _could_, in theory, by overriding the Reset Signal of the Memory,
+ # hmmm....
+
+ dtlb_valid = cfg.TLBValidArray()
+ tlb_req_index = self.tlb_req_index
+
+ print ("TLB_TAG_WAY_BITS", cfg.TLB_TAG_WAY_BITS)
+ print (" TLB_EA_TAG_BITS", cfg.TLB_EA_TAG_BITS)
+ print (" TLB_NUM_WAYS", cfg.TLB_NUM_WAYS)
+ print ("TLB_PTE_WAY_BITS", cfg.TLB_PTE_WAY_BITS)
+ print (" TLB_PTE_BITS", cfg.TLB_PTE_BITS)
+ print (" TLB_NUM_WAYS", cfg.TLB_NUM_WAYS)
+
+ # TAG and PTE Memory SRAMs. transparent, write-enables are TLB_NUM_WAYS
+ tagway = Memory(depth=cfg.TLB_SET_SIZE, width=cfg.TLB_TAG_WAY_BITS,
+ attrs={'syn_ramstyle': "block_ram"})
+ m.submodules.rd_tagway = rd_tagway = tagway.read_port()
+ m.submodules.wr_tagway = wr_tagway = tagway.write_port(
+ granularity=cfg.TLB_EA_TAG_BITS)
+
+ pteway = Memory(depth=cfg.TLB_SET_SIZE, width=cfg.TLB_PTE_WAY_BITS,
+ attrs={'syn_ramstyle': "block_ram"})
+ m.submodules.rd_pteway = rd_pteway = pteway.read_port()
+ m.submodules.wr_pteway = wr_pteway = pteway.write_port(
+ granularity=cfg.TLB_PTE_BITS)
+
+ # commented out for now, can be put in if Memory.reset can be
+ # used for tlbie&doall to reset the entire Memory to zero in 1 cycle
+ #validm = Memory(depth=TLB_SET_SIZE, width=TLB_NUM_WAYS)
+ #m.submodules.rd_valid = rd_valid = validm.read_port()
+ #m.submodules.wr_valid = wr_valid = validm.write_port(
+ #granularity=1)
+
+ # connect up read and write addresses to Valid/PTE/TAG SRAMs
+ m.d.comb += rd_pteway.addr.eq(self.tlb_read_index)
+ m.d.comb += rd_tagway.addr.eq(self.tlb_read_index)
+ #m.d.comb += rd_valid.addr.eq(self.tlb_read_index)
+ m.d.comb += wr_tagway.addr.eq(tlb_req_index)
+ m.d.comb += wr_pteway.addr.eq(tlb_req_index)
+ #m.d.comb += wr_valid.addr.eq(tlb_req_index)
+
+ updated = Signal()
+ v_updated = Signal()
+ tb_out = Signal(cfg.TLB_TAG_WAY_BITS) # tlb_way_tags_t
+ db_out = Signal(cfg.TLB_NUM_WAYS) # tlb_way_valids_t
+ pb_out = Signal(cfg.TLB_PTE_WAY_BITS) # tlb_way_ptes_t
+ dv = Signal(cfg.TLB_NUM_WAYS) # tlb_way_valids_t
+
+ comb += dv.eq(dtlb_valid[tlb_req_index])
+ comb += db_out.eq(dv)
with m.If(self.tlbie & self.doall):
- pass # clear all back in parent
+ # clear all valid bits at once
+ # XXX hmmm, validm _could_ use Memory reset here...
+ for i in range(cfg.TLB_SET_SIZE):
+ sync += dtlb_valid[i].eq(0)
with m.Elif(self.tlbie):
- with m.If(self.tlb_hit):
- comb += db_out.bit_select(self.tlb_hit_way, 1).eq(0)
- comb += self.v_updated.eq(1)
-
+ # invalidate just the hit_way
+ with m.If(self.tlb_hit.valid):
+ comb += db_out.bit_select(self.tlb_hit.way, 1).eq(0)
+ comb += v_updated.eq(1)
with m.Elif(self.tlbwe):
-
- comb += tagset.eq(self.tlb_tag_way)
- comb += write_tlb_tag(self.repl_way, tagset, self.eatag)
- comb += tb_out.eq(tagset)
-
- comb += pteset.eq(self.tlb_pte_way)
- comb += write_tlb_pte(self.repl_way, pteset, self.pte_data)
- comb += pb_out.eq(pteset)
-
+ # write to the requested tag and PTE
+ comb += cfg.write_tlb_tag(self.repl_way, tb_out, self.eatag)
+ comb += cfg.write_tlb_pte(self.repl_way, pb_out, self.pte_data)
+ # set valid bit
comb += db_out.bit_select(self.repl_way, 1).eq(1)
- comb += self.updated.eq(1)
- comb += self.v_updated.eq(1)
+ comb += updated.eq(1)
+ comb += v_updated.eq(1)
+
+ # above, sometimes valid is requested to be updated but data not
+ # therefore split them out, here. note the granularity thing matches
+ # with the shift-up of the eatag/pte_data into the correct TLB way.
+ # thus is it not necessary to write the entire lot, just the portion
+ # being altered: hence writing the *old* copy of the row is not needed
+ with m.If(updated): # PTE and TAG to be written
+ comb += wr_pteway.data.eq(pb_out)
+ comb += wr_pteway.en.eq(1<<self.repl_way)
+ comb += wr_tagway.data.eq(tb_out)
+ comb += wr_tagway.en.eq(1<<self.repl_way)
+ with m.If(v_updated): # Valid to be written
+ sync += dtlb_valid[tlb_req_index].eq(db_out)
+ #comb += wr_valid.data.eq(db_out)
+ #comb += wr_valid.en.eq(1<<self.repl_way)
+
+ # select one TLB way, use a register here
+ r_delay = Signal()
+ sync += r_delay.eq(self.tlb_read)
+ # first deal with the valids, which are not in a Memory.
+ # tlb way valid is output on a 1 clock delay with sync,
+ # but have to explicitly deal with "forwarding" here
+ with m.If(self.tlb_read):
+ with m.If(v_updated): # write *and* read in same cycle: forward
+ sync += self.tlb_way.valid.eq(db_out)
+ with m.Else():
+ sync += self.tlb_way.valid.eq(dtlb_valid[self.tlb_read_index])
+ # now deal with the Memory-read case. the output must remain
+ # valid (stable) even when a read-request is not made, but stable
+ # on a one-clock delay, hence the register
+ r_tlb_way = cfg.TLBRecord("r_tlb_way")
+ with m.If(r_delay):
+ # on one clock delay, capture the contents of the read port(s)
+ comb += self.tlb_way.tag.eq(rd_tagway.data)
+ comb += self.tlb_way.pte.eq(rd_pteway.data)
+ sync += r_tlb_way.tag.eq(rd_tagway.data)
+ sync += r_tlb_way.pte.eq(rd_pteway.data)
+ with m.Else():
+ # ... so that the register can output it when no read is requested
+ # it's rather overkill but better to be safe than sorry
+ comb += self.tlb_way.tag.eq(r_tlb_way.tag)
+ comb += self.tlb_way.pte.eq(r_tlb_way.pte)
+ #comb += self.tlb_way.eq(r_tlb_way)
return m
class DCachePendingHit(Elaboratable):
- def __init__(self, tlb_way, tlb_hit_way,
+ def __init__(self, cfg, tlb_way,
cache_i_validdx, cache_tag_set,
- req_addr,
- hit_set):
+ req_addr):
self.go = Signal()
self.virt_mode = Signal()
self.is_hit = Signal()
- self.tlb_hit = Signal()
- self.hit_way = Signal(WAY_BITS)
+ self.tlb_hit = cfg.TLBHit("tlb_hit")
+ self.hit_way = Signal(cfg.WAY_BITS)
self.rel_match = Signal()
- self.req_index = Signal(INDEX_BITS)
- self.reload_tag = Signal(TAG_BITS)
+ self.req_index = Signal(cfg.INDEX_BITS)
+ self.reload_tag = Signal(cfg.TAG_BITS)
- self.tlb_hit_way = tlb_hit_way
self.tlb_way = tlb_way
self.cache_i_validdx = cache_i_validdx
self.cache_tag_set = cache_tag_set
self.req_addr = req_addr
- self.hit_set = hit_set
+ self.cfg = cfg
def elaborate(self, platform):
m = Module()
cache_i_validdx = self.cache_i_validdx
cache_tag_set = self.cache_tag_set
req_addr = self.req_addr
- tlb_hit_way = self.tlb_hit_way
tlb_hit = self.tlb_hit
- hit_set = self.hit_set
hit_way = self.hit_way
rel_match = self.rel_match
req_index = self.req_index
reload_tag = self.reload_tag
+ cfg = self.cfg
+ hit_set = Array(Signal(name="hit_set_%d" % i) \
+ for i in range(cfg.TLB_NUM_WAYS))
rel_matches = Array(Signal(name="rel_matches_%d" % i) \
- for i in range(TLB_NUM_WAYS))
- hit_way_set = HitWaySet()
+ for i in range(cfg.TLB_NUM_WAYS))
+ hit_way_set = cfg.HitWaySet()
# Test if pending request is a hit on any way
# In order to make timing in virtual mode,
# the TLB, and then decide later which match to use.
with m.If(virt_mode):
- for j in range(TLB_NUM_WAYS): # tlb_num_way_t
- s_tag = Signal(TAG_BITS, name="s_tag%d" % j)
- s_hit = Signal()
- s_pte = Signal(TLB_PTE_BITS)
- s_ra = Signal(REAL_ADDR_BITS)
- comb += s_pte.eq(read_tlb_pte(j, tlb_way.pte))
- comb += s_ra.eq(Cat(req_addr[0:TLB_LG_PGSZ],
- s_pte[TLB_LG_PGSZ:REAL_ADDR_BITS]))
- comb += s_tag.eq(get_tag(s_ra))
-
- for i in range(NUM_WAYS): # way_t
+ for j in range(cfg.TLB_NUM_WAYS): # tlb_num_way_t
+ s_tag = Signal(cfg.TAG_BITS, name="s_tag%d" % j)
+ s_hit = Signal(name="s_hit%d" % j)
+ s_pte = Signal(cfg.TLB_PTE_BITS, name="s_pte%d" % j)
+ s_ra = Signal(cfg.REAL_ADDR_BITS, name="s_ra%d" % j)
+ # read the PTE, calc the Real Address, get tge tag
+ comb += s_pte.eq(cfg.read_tlb_pte(j, tlb_way.pte))
+ comb += s_ra.eq(Cat(req_addr[0:cfg.TLB_LG_PGSZ],
+ s_pte[cfg.TLB_LG_PGSZ:cfg.REAL_ADDR_BITS]))
+ comb += s_tag.eq(cfg.get_tag(s_ra))
+ # for each way check tge tag against the cache tag set
+ for i in range(cfg.NUM_WAYS): # way_t
is_tag_hit = Signal(name="is_tag_hit_%d_%d" % (j, i))
comb += is_tag_hit.eq(go & cache_i_validdx[i] &
- (read_tag(i, cache_tag_set) == s_tag)
+ (cfg.read_tag(i, cache_tag_set) == s_tag)
& (tlb_way.valid[j]))
with m.If(is_tag_hit):
comb += hit_way_set[j].eq(i)
comb += s_hit.eq(1)
comb += hit_set[j].eq(s_hit)
- with m.If(s_tag == reload_tag):
- comb += rel_matches[j].eq(1)
- with m.If(tlb_hit):
- comb += is_hit.eq(hit_set[tlb_hit_way])
- comb += hit_way.eq(hit_way_set[tlb_hit_way])
- comb += rel_match.eq(rel_matches[tlb_hit_way])
+ comb += rel_matches[j].eq(s_tag == reload_tag)
+ with m.If(tlb_hit.valid):
+ comb += is_hit.eq(hit_set[tlb_hit.way])
+ comb += hit_way.eq(hit_way_set[tlb_hit.way])
+ comb += rel_match.eq(rel_matches[tlb_hit.way])
with m.Else():
- s_tag = Signal(TAG_BITS)
- comb += s_tag.eq(get_tag(req_addr))
- for i in range(NUM_WAYS): # way_t
+ s_tag = Signal(cfg.TAG_BITS)
+ comb += s_tag.eq(cfg.get_tag(req_addr))
+ for i in range(cfg.NUM_WAYS): # way_t
is_tag_hit = Signal(name="is_tag_hit_%d" % i)
comb += is_tag_hit.eq(go & cache_i_validdx[i] &
- (read_tag(i, cache_tag_set) == s_tag))
+ (cfg.read_tag(i, cache_tag_set) == s_tag))
with m.If(is_tag_hit):
comb += hit_way.eq(i)
comb += is_hit.eq(1)
return m
-class DCache(Elaboratable):
+class DCache(Elaboratable, DCacheConfig):
"""Set associative dcache write-through
TODO (in no specific order):
at the end of line (this requires dealing with requests coming in
while not idle...)
"""
- def __init__(self):
+ def __init__(self, pspec=None):
self.d_in = LoadStore1ToDCacheType("d_in")
self.d_out = DCacheToLoadStore1Type("d_out")
self.m_out = DCacheToMMUType("m_out")
self.stall_out = Signal()
+ self.any_stall_out = Signal()
+ self.dreq_when_stall = Signal()
+ self.mreq_when_stall = Signal()
# standard naming (wired to non-standard for compatibility)
self.bus = Interface(addr_width=32,
data_width=64,
granularity=8,
features={'stall'},
- alignment=0,
+ #alignment=0,
name="dcache")
self.log_out = Signal(20)
+ # test if small cache to be enabled
+ self.small_cache = (hasattr(pspec, "small_cache") and
+ (pspec.small_cache == True))
+ # test if microwatt compatibility is to be enabled
+ self.microwatt_compat = (hasattr(pspec, "microwatt_compat") and
+ (pspec.microwatt_compat == True))
+
+ XLEN = pspec.XLEN
+ TLB_SET_SIZE = 16
+ TLB_NUM_WAYS = 2
+ NUM_LINES = 16
+ NUM_WAYS = 2
+
+ if self.small_cache:
+ # reduce way sizes and num lines to ridiculously small
+ TLB_SET_SIZE = 2
+ TLB_NUM_WAYS = 1
+ NUM_LINES = 2
+ NUM_WAYS = 1
+ if self.microwatt_compat:
+ # reduce way sizes
+ NUM_WAYS = 1
+ TLB_NUM_WAYS = 1
+
+ super().__init__(TLB_SET_SIZE=TLB_SET_SIZE,
+ # XLEN=XLEN, # TODO
+ TLB_NUM_WAYS = TLB_NUM_WAYS,
+ NUM_LINES = NUM_LINES,
+ NUM_WAYS = NUM_WAYS
+ )
+
def stage_0(self, m, r0, r1, r0_full):
"""Latch the request in r0.req as long as we're not stalling
"""
comb += r.doall.eq(m_in.doall)
comb += r.tlbld.eq(m_in.tlbld)
comb += r.mmu_req.eq(1)
+ comb += r.d_valid.eq(1)
m.d.sync += Display(" DCACHE req mmu addr %x pte %x ld %d",
m_in.addr, m_in.pte, r.req.load)
comb += r.doall.eq(0)
comb += r.tlbld.eq(0)
comb += r.mmu_req.eq(0)
+ comb += r.d_valid.eq(0)
+
+ sync += r0_full.eq(0)
with m.If((~r1.full & ~d_in.hold) | ~r0_full):
sync += r0.eq(r)
sync += r0_full.eq(r.req.valid)
+ with m.Elif(~r0.d_valid):
# Sample data the cycle after a request comes in from loadstore1.
# If another request has come in already then the data will get
# put directly into req.data below.
- with m.If(r0.req.valid & ~r.req.valid & ~r0.d_valid &
- ~r0.mmu_req):
- sync += r0.req.data.eq(d_in.data)
- sync += r0.d_valid.eq(1)
+ sync += r0.req.data.eq(d_in.data)
+ sync += r0.d_valid.eq(1)
with m.If(d_in.valid):
m.d.sync += Display(" DCACHE req cache "
"virt %d addr %x data %x ld %d",
r.req.virt_mode, r.req.addr,
r.req.data, r.req.load)
- def tlb_read(self, m, r0_stall, tlb_way, dtlb):
+ def tlb_read(self, m, r0_stall, tlb_way):
"""TLB
Operates in the second cycle on the request latched in r0.req.
TLB updates write the entry at the end of the second cycle.
sync = m.d.sync
m_in, d_in = self.m_in, self.d_in
- index = Signal(TLB_SET_BITS)
- addrbits = Signal(TLB_SET_BITS)
+ addrbits = Signal(self.TLB_SET_BITS)
- amin = TLB_LG_PGSZ
- amax = TLB_LG_PGSZ + TLB_SET_BITS
+ amin = self.TLB_LG_PGSZ
+ amax = self.TLB_LG_PGSZ + self.TLB_SET_BITS
with m.If(m_in.valid):
comb += addrbits.eq(m_in.addr[amin : amax])
with m.Else():
comb += addrbits.eq(d_in.addr[amin : amax])
- comb += index.eq(addrbits)
# If we have any op and the previous op isn't finished,
# then keep the same output for next cycle.
- with m.If(~r0_stall):
- sync += tlb_way.eq(dtlb[index])
+ d = self.dtlb_update
+ comb += d.tlb_read_index.eq(addrbits)
+ comb += d.tlb_read.eq(~r0_stall)
+ comb += tlb_way.eq(d.tlb_way)
- def maybe_tlb_plrus(self, m, r1, tlb_plru_victim):
+ def maybe_tlb_plrus(self, m, r1, tlb_plru_victim, tlb_req_index):
"""Generate TLB PLRUs
"""
comb = m.d.comb
sync = m.d.sync
- if TLB_NUM_WAYS == 0:
+ if self.TLB_NUM_WAYS == 0:
return
- for i in range(TLB_SET_SIZE):
- # TLB PLRU interface
- tlb_plru = PLRU(TLB_WAY_BITS)
- setattr(m.submodules, "maybe_plru_%d" % i, tlb_plru)
- tlb_plru_acc_en = Signal()
- comb += tlb_plru_acc_en.eq(r1.tlb_hit & (r1.tlb_hit_index == i))
- comb += tlb_plru.acc_en.eq(tlb_plru_acc_en)
- comb += tlb_plru.acc_i.eq(r1.tlb_hit_way)
- comb += tlb_plru_victim[i].eq(tlb_plru.lru_o)
+ # suite of PLRUs with a selection and output mechanism
+ tlb_plrus = PLRUs("d_tlb", self.TLB_SET_SIZE, self.TLB_WAY_BITS)
+ m.submodules.tlb_plrus = tlb_plrus
+ comb += tlb_plrus.way.eq(r1.tlb_hit.way)
+ comb += tlb_plrus.valid.eq(r1.tlb_hit.valid)
+ comb += tlb_plrus.index.eq(r1.tlb_hit_index)
+ comb += tlb_plrus.isel.eq(tlb_req_index) # select victim
+ comb += tlb_plru_victim.eq(tlb_plrus.o_index) # selected victim
def tlb_search(self, m, tlb_req_index, r0, r0_valid,
tlb_way,
comb = m.d.comb
- hitway = Signal(TLB_WAY_BITS)
+ hitway = Signal(self.TLB_WAY_BITS)
hit = Signal()
- eatag = Signal(TLB_EA_TAG_BITS)
+ eatag = Signal(self.TLB_EA_TAG_BITS)
- TLB_LG_END = TLB_LG_PGSZ + TLB_SET_BITS
- comb += tlb_req_index.eq(r0.req.addr[TLB_LG_PGSZ : TLB_LG_END])
- comb += eatag.eq(r0.req.addr[TLB_LG_END : 64 ])
+ self.TLB_LG_END = self.TLB_LG_PGSZ + self.TLB_SET_BITS
+ r0_req_addr = r0.req.addr[self.TLB_LG_PGSZ : self.TLB_LG_END]
+ comb += tlb_req_index.eq(r0_req_addr)
+ comb += eatag.eq(r0.req.addr[self.TLB_LG_END : 64 ])
- for i in range(TLB_NUM_WAYS):
+ for i in range(self.TLB_NUM_WAYS):
is_tag_hit = Signal(name="is_tag_hit%d" % i)
- tlb_tag = Signal(TLB_EA_TAG_BITS, name="tlb_tag%d" % i)
- comb += tlb_tag.eq(read_tlb_tag(i, tlb_way.tag))
+ tlb_tag = Signal(self.TLB_EA_TAG_BITS, name="tlb_tag%d" % i)
+ comb += tlb_tag.eq(self.read_tlb_tag(i, tlb_way.tag))
comb += is_tag_hit.eq((tlb_way.valid[i]) & (tlb_tag == eatag))
with m.If(is_tag_hit):
comb += hitway.eq(i)
comb += tlb_hit.way.eq(hitway)
with m.If(tlb_hit.valid):
- comb += pte.eq(read_tlb_pte(hitway, tlb_way.pte))
+ comb += pte.eq(self.read_tlb_pte(hitway, tlb_way.pte))
comb += valid_ra.eq(tlb_hit.valid | ~r0.req.virt_mode)
with m.If(r0.req.virt_mode):
- comb += ra.eq(Cat(Const(0, ROW_OFF_BITS),
- r0.req.addr[ROW_OFF_BITS:TLB_LG_PGSZ],
- pte[TLB_LG_PGSZ:REAL_ADDR_BITS]))
+ comb += ra.eq(Cat(Const(0, self.ROW_OFF_BITS),
+ r0.req.addr[self.ROW_OFF_BITS:self.TLB_LG_PGSZ],
+ pte[self.TLB_LG_PGSZ:self.REAL_ADDR_BITS]))
comb += perm_attr.reference.eq(pte[8])
comb += perm_attr.changed.eq(pte[7])
comb += perm_attr.nocache.eq(pte[5])
comb += perm_attr.rd_perm.eq(pte[2])
comb += perm_attr.wr_perm.eq(pte[1])
with m.Else():
- comb += ra.eq(Cat(Const(0, ROW_OFF_BITS),
- r0.req.addr[ROW_OFF_BITS:REAL_ADDR_BITS]))
+ comb += ra.eq(Cat(Const(0, self.ROW_OFF_BITS),
+ r0.req.addr[self.ROW_OFF_BITS:self.REAL_ADDR_BITS]))
comb += perm_attr.reference.eq(1)
comb += perm_attr.changed.eq(1)
comb += perm_attr.nocache.eq(0)
m.d.sync += Display(" perm rdp=%d", perm_attr.rd_perm)
m.d.sync += Display(" perm wrp=%d", perm_attr.wr_perm)
- def tlb_update(self, m, r0_valid, r0, dtlb, tlb_req_index,
- tlb_hit, tlb_plru_victim, tlb_way):
+ def tlb_update(self, m, r0_valid, r0, tlb_req_index,
+ tlb_hit, tlb_plru_victim):
comb = m.d.comb
sync = m.d.sync
comb += tlbie.eq(r0_valid & r0.tlbie)
comb += tlbwe.eq(r0_valid & r0.tlbld)
- m.submodules.tlb_update = d = DTLBUpdate()
- with m.If(tlbie & r0.doall):
- # clear all valid bits at once
- for i in range(TLB_SET_SIZE):
- sync += dtlb[i].valid.eq(0)
- with m.If(d.updated):
- sync += dtlb[tlb_req_index].tag.eq(d.tb_out)
- sync += dtlb[tlb_req_index].pte.eq(d.pb_out)
- with m.If(d.v_updated):
- sync += dtlb[tlb_req_index].valid.eq(d.db_out)
-
- comb += d.dv.eq(dtlb[tlb_req_index].valid)
+ d = self.dtlb_update
comb += d.tlbie.eq(tlbie)
comb += d.tlbwe.eq(tlbwe)
comb += d.doall.eq(r0.doall)
- comb += d.tlb_hit.eq(tlb_hit.valid)
- comb += d.tlb_hit_way.eq(tlb_hit.way)
- comb += d.tlb_tag_way.eq(tlb_way.tag)
- comb += d.tlb_pte_way.eq(tlb_way.pte)
+ comb += d.tlb_hit.eq(tlb_hit)
comb += d.tlb_req_index.eq(tlb_req_index)
with m.If(tlb_hit.valid):
comb += d.repl_way.eq(tlb_hit.way)
with m.Else():
- comb += d.repl_way.eq(tlb_plru_victim[tlb_req_index])
- comb += d.eatag.eq(r0.req.addr[TLB_LG_PGSZ + TLB_SET_BITS:64])
+ comb += d.repl_way.eq(tlb_plru_victim)
+ comb += d.eatag.eq(r0.req.addr[self.TLB_LG_PGSZ + self.TLB_SET_BITS:64])
comb += d.pte_data.eq(r0.req.data)
def maybe_plrus(self, m, r1, plru_victim):
comb = m.d.comb
sync = m.d.sync
- if TLB_NUM_WAYS == 0:
+ if self.TLB_NUM_WAYS == 0:
return
- for i in range(NUM_LINES):
- # PLRU interface
- plru = PLRU(WAY_BITS)
- setattr(m.submodules, "plru%d" % i, plru)
- plru_acc_en = Signal()
-
- comb += plru_acc_en.eq(r1.cache_hit & (r1.hit_index == i))
- comb += plru.acc_en.eq(plru_acc_en)
- comb += plru.acc_i.eq(r1.hit_way)
- comb += plru_victim[i].eq(plru.lru_o)
+ # suite of PLRUs with a selection and output mechanism
+ m.submodules.plrus = plrus = PLRUs("dtag", self.NUM_LINES,
+ self.WAY_BITS)
+ comb += plrus.way.eq(r1.hit_way)
+ comb += plrus.valid.eq(r1.cache_hit)
+ comb += plrus.index.eq(r1.hit_index)
+ comb += plrus.isel.eq(r1.store_index) # select victim
+ comb += plru_victim.eq(plrus.o_index) # selected victim
- def cache_tag_read(self, m, r0_stall, req_index, cache_tag_set, cache_tags):
+ def cache_tag_read(self, m, r0_stall, req_index, cache_tag_set):
"""Cache tag RAM read port
"""
comb = m.d.comb
sync = m.d.sync
+
m_in, d_in = self.m_in, self.d_in
- index = Signal(INDEX_BITS)
+ # synchronous tag read-port: NOT TRANSPARENT (cannot pass through
+ # write-to-a-read at the same time), seems to pass tests ok
+ m.submodules.rd_tag = rd_tag = self.tagmem.read_port(transparent=False)
+
+ index = Signal(self.INDEX_BITS)
with m.If(r0_stall):
comb += index.eq(req_index)
with m.Elif(m_in.valid):
- comb += index.eq(get_index(m_in.addr))
+ comb += index.eq(self.get_index(m_in.addr))
with m.Else():
- comb += index.eq(get_index(d_in.addr))
- sync += cache_tag_set.eq(cache_tags[index].tag)
+ comb += index.eq(self.get_index(d_in.addr))
+ comb += rd_tag.addr.eq(index)
+ comb += cache_tag_set.eq(rd_tag.data) # read-port is a 1-clock delay
def dcache_request(self, m, r0, ra, req_index, req_row, req_tag,
- r0_valid, r1, cache_tags, replace_way,
+ r0_valid, r1, cache_valids, replace_way,
use_forward1_next, use_forward2_next,
req_hit_way, plru_victim, rc_ok, perm_attr,
valid_ra, perm_ok, access_ok, req_op, req_go,
m_in, d_in = self.m_in, self.d_in
is_hit = Signal()
- hit_way = Signal(WAY_BITS)
+ hit_way = Signal(self.WAY_BITS)
op = Signal(Op)
opsel = Signal(3)
go = Signal()
nc = Signal()
- hit_set = Array(Signal(name="hit_set_%d" % i) \
- for i in range(TLB_NUM_WAYS))
- cache_i_validdx = Signal(NUM_WAYS)
+ cache_i_validdx = Signal(self.NUM_WAYS)
# Extract line, row and tag from request
- comb += req_index.eq(get_index(r0.req.addr))
- comb += req_row.eq(get_row(r0.req.addr))
- comb += req_tag.eq(get_tag(ra))
+ comb += req_index.eq(self.get_index(r0.req.addr))
+ comb += req_row.eq(self.get_row(r0.req.addr))
+ comb += req_tag.eq(self.get_tag(ra))
if False: # display on comb is a bit... busy.
comb += Display("dcache_req addr:%x ra: %x idx: %x tag: %x row: %x",
r0.req.addr, ra, req_index, req_tag, req_row)
comb += go.eq(r0_valid & ~(r0.tlbie | r0.tlbld) & ~r1.ls_error)
- comb += cache_i_validdx.eq(cache_tags[req_index].valid)
+ comb += cache_i_validdx.eq(cache_valids[req_index])
- m.submodules.dcache_pend = dc = DCachePendingHit(
- tlb_way, tlb_hit.way,
- cache_i_validdx, cache_tag_set,
- r0.req.addr,
- hit_set)
-
- comb += dc.tlb_hit.eq(tlb_hit.valid)
+ m.submodules.dcache_pend = dc = DCachePendingHit(self, tlb_way,
+ cache_i_validdx, cache_tag_set,
+ r0.req.addr)
+ comb += dc.tlb_hit.eq(tlb_hit)
comb += dc.reload_tag.eq(r1.reload_tag)
comb += dc.virt_mode.eq(r0.req.virt_mode)
comb += dc.go.eq(go)
comb += dc.req_index.eq(req_index)
+
comb += is_hit.eq(dc.is_hit)
comb += hit_way.eq(dc.hit_way)
comb += req_same_tag.eq(dc.rel_match)
# For a store, consider this a hit even if the row isn't
# valid since it will be by the time we perform the store.
# For a load, check the appropriate row valid bit.
- rrow = Signal(ROW_LINE_BITS)
+ rrow = Signal(self.ROW_LINE_BITS)
comb += rrow.eq(req_row)
valid = r1.rows_valid[rrow]
comb += is_hit.eq((~r0.req.load) | valid)
comb += hit_way.eq(replace_way)
# Whether to use forwarded data for a load or not
- with m.If((get_row(r1.req.real_addr) == req_row) &
+ with m.If((self.get_row(r1.req.real_addr) == req_row) &
(r1.req.hit_way == hit_way)):
# Only need to consider r1.write_bram here, since if we
# are writing refill data here, then we don't have a
# The way to replace on a miss
with m.If(r1.write_tag):
- comb += replace_way.eq(plru_victim[r1.store_index])
+ comb += replace_way.eq(plru_victim)
with m.Else():
comb += replace_way.eq(r1.store_way)
(perm_attr.wr_perm |
(r0.req.load & perm_attr.rd_perm)))
comb += access_ok.eq(valid_ra & perm_ok & rc_ok)
+
# Combine the request and cache hit status to decide what
# operation needs to be done
comb += nc.eq(r0.req.nc | perm_attr.nocache)
# row requested.
with m.If(~r0_stall):
with m.If(m_in.valid):
- comb += early_req_row.eq(get_row(m_in.addr))
+ comb += early_req_row.eq(self.get_row(m_in.addr))
with m.Else():
- comb += early_req_row.eq(get_row(d_in.addr))
+ comb += early_req_row.eq(self.get_row(d_in.addr))
with m.Else():
comb += early_req_row.eq(req_row)
with m.Else():
comb += clear_rsrv.eq(r0.req.atomic_last) # store conditional
with m.If((~reservation.valid) |
- (r0.req.addr[LINE_OFF_BITS:64] != reservation.addr)):
+ (r0.req.addr[self.LINE_OFF_BITS:64] !=
+ reservation.addr)):
comb += cancel_store.eq(1)
def reservation_reg(self, m, r0_valid, access_ok, set_rsrv, clear_rsrv,
reservation, r0):
-
comb = m.d.comb
sync = m.d.sync
sync += reservation.valid.eq(0)
with m.Elif(set_rsrv):
sync += reservation.valid.eq(1)
- sync += reservation.addr.eq(r0.req.addr[LINE_OFF_BITS:64])
+ sync += reservation.addr.eq(r0.req.addr[self.LINE_OFF_BITS:64])
def writeback_control(self, m, r1, cache_out_row):
"""Return data for loads & completion control logic
dsel = data_fwd.word_select(i, 8)
comb += data_out.word_select(i, 8).eq(dsel)
+ # DCache output to LoadStore
comb += d_out.valid.eq(r1.ls_valid)
comb += d_out.data.eq(data_out)
comb += d_out.store_done.eq(~r1.stcx_fail)
comb = m.d.comb
bus = self.bus
- for i in range(NUM_WAYS):
- do_read = Signal(name="do_rd%d" % i)
- rd_addr = Signal(ROW_BITS, name="rd_addr_%d" % i)
+ # a Binary-to-Unary one-hots here. replace-way one-hot is gated
+ # (enabled) by bus.ack, not-write-bram, and state RELOAD_WAIT_ACK
+ m.submodules.rams_replace_way_e = rwe = Decoder(self.NUM_WAYS)
+ comb += rwe.n.eq(~((r1.state == State.RELOAD_WAIT_ACK) & bus.ack &
+ ~r1.write_bram))
+ comb += rwe.i.eq(replace_way)
+
+ m.submodules.rams_hit_way_e = hwe = Decoder(self.NUM_WAYS)
+ comb += hwe.i.eq(r1.hit_way)
+
+ # this one is gated with write_bram, and replace_way_e can never be
+ # set at the same time. that means that do_write can OR the outputs
+ m.submodules.rams_hit_req_way_e = hre = Decoder(self.NUM_WAYS)
+ comb += hre.n.eq(~r1.write_bram) # Decoder.n is inverted
+ comb += hre.i.eq(r1.req.hit_way)
+
+ # common Signals
+ do_read = Signal()
+ wr_addr = Signal(self.ROW_BITS)
+ wr_data = Signal(WB_DATA_BITS)
+ wr_sel = Signal(self.ROW_SIZE)
+ rd_addr = Signal(self.ROW_BITS)
+
+ comb += do_read.eq(1) # always enable
+ comb += rd_addr.eq(early_req_row)
+
+ # Write mux:
+ #
+ # Defaults to wishbone read responses (cache refill)
+ #
+ # For timing, the mux on wr_data/sel/addr is not
+ # dependent on anything other than the current state.
+
+ with m.If(r1.write_bram):
+ # Write store data to BRAM. This happens one
+ # cycle after the store is in r0.
+ comb += wr_data.eq(r1.req.data)
+ comb += wr_sel.eq(r1.req.byte_sel)
+ comb += wr_addr.eq(self.get_row(r1.req.real_addr))
+
+ with m.Else():
+ # Otherwise, we might be doing a reload or a DCBZ
+ with m.If(r1.dcbz):
+ comb += wr_data.eq(0)
+ with m.Else():
+ comb += wr_data.eq(bus.dat_r)
+ comb += wr_addr.eq(r1.store_row)
+ comb += wr_sel.eq(~0) # all 1s
+
+ # set up Cache Rams
+ for i in range(self.NUM_WAYS):
do_write = Signal(name="do_wr%d" % i)
- wr_addr = Signal(ROW_BITS, name="wr_addr_%d" % i)
- wr_data = Signal(WB_DATA_BITS, name="din_%d" % i)
- wr_sel = Signal(ROW_SIZE)
- wr_sel_m = Signal(ROW_SIZE)
- _d_out = Signal(WB_DATA_BITS, name="dout_%d" % i) # cache_row_t
+ wr_sel_m = Signal(self.ROW_SIZE, name="wr_sel_m_%d" % i)
+ d_out= Signal(WB_DATA_BITS, name="dout_%d" % i) # cache_row_t
- way = CacheRam(ROW_BITS, WB_DATA_BITS, ADD_BUF=True, ram_num=i)
- setattr(m.submodules, "cacheram_%d" % i, way)
+ way = CacheRam(self.ROW_BITS, WB_DATA_BITS, ADD_BUF=True, ram_num=i)
+ m.submodules["cacheram_%d" % i] = way
comb += way.rd_en.eq(do_read)
comb += way.rd_addr.eq(rd_addr)
- comb += _d_out.eq(way.rd_data_o)
+ comb += d_out.eq(way.rd_data_o)
comb += way.wr_sel.eq(wr_sel_m)
comb += way.wr_addr.eq(wr_addr)
comb += way.wr_data.eq(wr_data)
# Cache hit reads
- comb += do_read.eq(1)
- comb += rd_addr.eq(early_req_row)
- with m.If(r1.hit_way == i):
- comb += cache_out_row.eq(_d_out)
-
- # Write mux:
- #
- # Defaults to wishbone read responses (cache refill)
- #
- # For timing, the mux on wr_data/sel/addr is not
- # dependent on anything other than the current state.
-
- with m.If(r1.write_bram):
- # Write store data to BRAM. This happens one
- # cycle after the store is in r0.
- comb += wr_data.eq(r1.req.data)
- comb += wr_sel.eq(r1.req.byte_sel)
- comb += wr_addr.eq(get_row(r1.req.real_addr))
-
- with m.If(i == r1.req.hit_way):
- comb += do_write.eq(1)
- with m.Else():
- # Otherwise, we might be doing a reload or a DCBZ
- with m.If(r1.dcbz):
- comb += wr_data.eq(0)
- with m.Else():
- comb += wr_data.eq(bus.dat_r)
- comb += wr_addr.eq(r1.store_row)
- comb += wr_sel.eq(~0) # all 1s
+ with m.If(hwe.o[i]):
+ comb += cache_out_row.eq(d_out)
- with m.If((r1.state == State.RELOAD_WAIT_ACK)
- & bus.ack & (replace_way == i)):
- comb += do_write.eq(1)
+ # these are mutually-exclusive via their Decoder-enablers
+ # (note: Decoder-enable is inverted)
+ comb += do_write.eq(hre.o[i] | rwe.o[i])
# Mask write selects with do_write since BRAM
# doesn't have a global write-enable
def dcache_fast_hit(self, m, req_op, r0_valid, r0, r1,
req_hit_way, req_index, req_tag, access_ok,
tlb_hit, tlb_req_index):
-
comb = m.d.comb
sync = m.d.sync
sync += r1.hit_way.eq(req_hit_way)
sync += r1.hit_index.eq(req_index)
- with m.If(req_op == Op.OP_LOAD_HIT):
- sync += r1.hit_load_valid.eq(1)
- with m.Else():
- sync += r1.hit_load_valid.eq(0)
-
- with m.If((req_op == Op.OP_LOAD_HIT) | (req_op == Op.OP_STORE_HIT)):
- sync += r1.cache_hit.eq(1)
- with m.Else():
- sync += r1.cache_hit.eq(0)
+ sync += r1.hit_load_valid.eq(req_op == Op.OP_LOAD_HIT)
+ sync += r1.cache_hit.eq((req_op == Op.OP_LOAD_HIT) |
+ (req_op == Op.OP_STORE_HIT))
with m.If(req_op == Op.OP_BAD):
sync += Display("Signalling ld/st error "
sync += r1.ls_error.eq(~r0.mmu_req)
sync += r1.mmu_error.eq(r0.mmu_req)
sync += r1.cache_paradox.eq(access_ok)
-
with m.Else():
sync += r1.ls_error.eq(0)
sync += r1.mmu_error.eq(0)
sync += r1.cache_paradox.eq(0)
- with m.If(req_op == Op.OP_STCX_FAIL):
- sync += r1.stcx_fail.eq(1)
- with m.Else():
- sync += r1.stcx_fail.eq(0)
+ sync += r1.stcx_fail.eq(req_op == Op.OP_STCX_FAIL)
# Record TLB hit information for updating TLB PLRU
- sync += r1.tlb_hit.eq(tlb_hit.valid)
- sync += r1.tlb_hit_way.eq(tlb_hit.way)
+ sync += r1.tlb_hit.eq(tlb_hit)
sync += r1.tlb_hit_index.eq(tlb_req_index)
# Memory accesses are handled by this state machine:
def dcache_slow(self, m, r1, use_forward1_next, use_forward2_next,
r0, replace_way,
req_hit_way, req_same_tag,
- r0_valid, req_op, cache_tags, req_go, ra):
+ r0_valid, req_op, cache_valids, req_go, ra):
comb = m.d.comb
sync = m.d.sync
bus = self.bus
d_in = self.d_in
- req = MemAccessRequest("mreq_ds")
+ m.submodules.wr_tag = wr_tag = self.tagmem.write_port(
+ granularity=self.TAG_WIDTH)
- req_row = Signal(ROW_BITS)
- req_idx = Signal(INDEX_BITS)
- req_tag = Signal(TAG_BITS)
- comb += req_idx.eq(get_index(req.real_addr))
- comb += req_row.eq(get_row(req.real_addr))
- comb += req_tag.eq(get_tag(req.real_addr))
+ req = MemAccessRequest(self, "mreq_ds")
+
+ r1_next_cycle = Signal()
+ req_row = Signal(self.ROW_BITS)
+ req_idx = Signal(self.INDEX_BITS)
+ req_tag = Signal(self.TAG_BITS)
+ comb += req_idx.eq(self.get_index(req.real_addr))
+ comb += req_row.eq(self.get_row(req.real_addr))
+ comb += req_tag.eq(self.get_tag(req.real_addr))
sync += r1.use_forward1.eq(use_forward1_next)
sync += r1.forward_sel.eq(0)
sync += r1.forward_data1.eq(r1.req.data)
sync += r1.forward_sel1.eq(r1.req.byte_sel)
sync += r1.forward_way1.eq(r1.req.hit_way)
- sync += r1.forward_row1.eq(get_row(r1.req.real_addr))
+ sync += r1.forward_row1.eq(self.get_row(r1.req.real_addr))
sync += r1.forward_valid1.eq(1)
with m.Else():
with m.If(r1.dcbz):
sync += r1.mmu_done.eq(r0_valid & (r0.tlbie | r0.tlbld))
with m.If((req_op == Op.OP_LOAD_HIT) | (req_op == Op.OP_STCX_FAIL)):
- with m.If(~r0.mmu_req):
- sync += r1.ls_valid.eq(1)
- with m.Else():
+ with m.If(r0.mmu_req):
sync += r1.mmu_done.eq(1)
+ with m.Else():
+ sync += r1.ls_valid.eq(1)
with m.If(r1.write_tag):
# Store new tag in selected way
- for i in range(NUM_WAYS):
- with m.If(i == replace_way):
- ct = Signal(TAG_RAM_WIDTH)
- comb += ct.eq(cache_tags[r1.store_index].tag)
- """
-TODO: check this
-cache_tags(r1.store_index)((i + 1) * TAG_WIDTH - 1 downto i * TAG_WIDTH) <=
- (TAG_WIDTH - 1 downto TAG_BITS => '0') & r1.reload_tag;
- """
- comb += ct.word_select(i, TAG_WIDTH).eq(r1.reload_tag)
- sync += cache_tags[r1.store_index].tag.eq(ct)
+ replace_way_onehot = Signal(self.NUM_WAYS)
+ comb += replace_way_onehot.eq(1<<replace_way)
+ ct = Signal(self.TAG_RAM_WIDTH)
+ comb += ct.eq(r1.reload_tag << (replace_way*self.TAG_WIDTH))
+ comb += wr_tag.en.eq(replace_way_onehot)
+ comb += wr_tag.addr.eq(r1.store_index)
+ comb += wr_tag.data.eq(ct)
+
sync += r1.store_way.eq(replace_way)
sync += r1.write_tag.eq(0)
| (req_op == Op.OP_STORE_HIT)):
sync += r1.req.eq(req)
sync += r1.full.eq(1)
+ # do not let r1.state RELOAD_WAIT_ACK or STORE_WAIT_ACK
+ # destroy r1.req by overwriting r1.full back to zero
+ comb += r1_next_cycle.eq(1)
# Main state machine
with m.Switch(r1.state):
with m.Case(State.IDLE):
- sync += r1.wb.adr.eq(req.real_addr[ROW_LINE_BITS:])
+ sync += r1.wb.adr.eq(req.real_addr[self.ROW_OFF_BITS:])
sync += r1.wb.sel.eq(req.byte_sel)
sync += r1.wb.dat.eq(req.data)
sync += r1.dcbz.eq(req.dcbz)
# for subsequent stores.
sync += r1.store_index.eq(req_idx)
sync += r1.store_row.eq(req_row)
- sync += r1.end_row_ix.eq(get_row_of_line(req_row)-1)
+ sync += r1.end_row_ix.eq(self.get_row_of_line(req_row)-1)
sync += r1.reload_tag.eq(req_tag)
sync += r1.req.same_tag.eq(1)
with m.If(req.op == Op.OP_STORE_HIT):
sync += r1.store_way.eq(req.hit_way)
+ #with m.If(r1.dec_acks):
+ # sync += r1.acks_pending.eq(r1.acks_pending - 1)
+
# Reset per-row valid bits,
# ready for handling OP_LOAD_MISS
- for i in range(ROW_PER_LINE):
+ for i in range(self.ROW_PER_LINE):
sync += r1.rows_valid[i].eq(0)
with m.If(req_op != Op.OP_NONE):
sync += r1.state.eq(State.STORE_WAIT_ACK)
sync += r1.acks_pending.eq(1)
sync += r1.full.eq(0)
+ comb += r1_next_cycle.eq(0)
sync += r1.slow_valid.eq(1)
- with m.If(~req.mmu_req):
- sync += r1.ls_valid.eq(1)
- with m.Else():
+ with m.If(req.mmu_req):
sync += r1.mmu_done.eq(1)
+ with m.Else():
+ sync += r1.ls_valid.eq(1)
with m.If(req.op == Op.OP_STORE_HIT):
sync += r1.write_bram.eq(1)
pass
with m.Case(State.RELOAD_WAIT_ACK):
- ld_stbs_done = Signal()
- # Requests are all sent if stb is 0
- comb += ld_stbs_done.eq(~r1.wb.stb)
# If we are still sending requests, was one accepted?
with m.If((~bus.stall) & r1.wb.stb):
- # That was the last word? We are done sending.
- # Clear stb and set ld_stbs_done so we can handle an
- # eventual last ack on the same cycle.
+ # That was the last word? We are done sending. Clear stb
# sigh - reconstruct wb adr with 3 extra 0s at front
- wb_adr = Cat(Const(0, ROW_OFF_BITS), r1.wb.adr)
- with m.If(is_last_row_addr(wb_adr, r1.end_row_ix)):
+ wb_adr = Cat(Const(0, self.ROW_OFF_BITS), r1.wb.adr)
+ with m.If(self.is_last_row_addr(wb_adr, r1.end_row_ix)):
sync += r1.wb.stb.eq(0)
- comb += ld_stbs_done.eq(1)
# Calculate the next row address in the current cache line
- row = Signal(LINE_OFF_BITS-ROW_OFF_BITS)
+ rlen = self.LINE_OFF_BITS-self.ROW_OFF_BITS
+ row = Signal(rlen)
comb += row.eq(r1.wb.adr)
- sync += r1.wb.adr[:LINE_OFF_BITS-ROW_OFF_BITS].eq(row+1)
+ sync += r1.wb.adr[:rlen].eq(row+1)
# Incoming acks processing
sync += r1.forward_valid1.eq(bus.ack)
with m.If(bus.ack):
- srow = Signal(ROW_LINE_BITS)
+ srow = Signal(self.ROW_LINE_BITS)
comb += srow.eq(r1.store_row)
sync += r1.rows_valid[srow].eq(1)
# Compare the whole address in case the
# request in r1.req is not the one that
# started this refill.
- with m.If(req.valid & r1.req.same_tag &
- ((r1.dcbz & r1.req.dcbz) |
- (~r1.dcbz & (r1.req.op == Op.OP_LOAD_MISS))) &
- (r1.store_row == get_row(req.real_addr))):
- sync += r1.full.eq(0)
+ rowmatch = Signal()
+ lastrow = Signal()
+ comb += rowmatch.eq(r1.store_row ==
+ self.get_row(r1.req.real_addr))
+ comb += lastrow.eq(self.is_last_row(r1.store_row,
+ r1.end_row_ix))
+ with m.If(r1.full & r1.req.same_tag &
+ ((r1.dcbz & req.dcbz) |
+ (r1.req.op == Op.OP_LOAD_MISS)) & rowmatch):
+ sync += r1.full.eq(r1_next_cycle)
sync += r1.slow_valid.eq(1)
- with m.If(~r1.mmu_req):
- sync += r1.ls_valid.eq(1)
- with m.Else():
+ with m.If(r1.mmu_req):
sync += r1.mmu_done.eq(1)
+ with m.Else():
+ sync += r1.ls_valid.eq(1)
sync += r1.forward_sel.eq(~0) # all 1s
sync += r1.use_forward1.eq(1)
# Check for completion
- with m.If(ld_stbs_done & is_last_row(r1.store_row,
- r1.end_row_ix)):
+ with m.If(lastrow):
# Complete wishbone cycle
sync += r1.wb.cyc.eq(0)
# Cache line is now valid
- cv = Signal(INDEX_BITS)
- comb += cv.eq(cache_tags[r1.store_index].valid)
+ cv = Signal(self.INDEX_BITS)
+ comb += cv.eq(cache_valids[r1.store_index])
comb += cv.bit_select(r1.store_way, 1).eq(1)
- sync += cache_tags[r1.store_index].valid.eq(cv)
+ sync += cache_valids[r1.store_index].eq(cv)
sync += r1.state.eq(State.IDLE)
sync += Display("cache valid set %x "
cv, r1.store_index, r1.store_way)
# Increment store row counter
- sync += r1.store_row.eq(next_row(r1.store_row))
+ sync += r1.store_row.eq(self.next_row(r1.store_row))
with m.Case(State.STORE_WAIT_ACK):
st_stbs_done = Signal()
- acks = Signal(3)
adjust_acks = Signal(3)
comb += st_stbs_done.eq(~r1.wb.stb)
- comb += acks.eq(r1.acks_pending)
with m.If(r1.inc_acks != r1.dec_acks):
with m.If(r1.inc_acks):
- comb += adjust_acks.eq(acks + 1)
+ comb += adjust_acks.eq(r1.acks_pending + 1)
with m.Else():
- comb += adjust_acks.eq(acks - 1)
+ comb += adjust_acks.eq(r1.acks_pending - 1)
with m.Else():
- comb += adjust_acks.eq(acks)
+ comb += adjust_acks.eq(r1.acks_pending)
sync += r1.acks_pending.eq(adjust_acks)
with m.If(~bus.stall):
# See if there is another store waiting
# to be done which is in the same real page.
+ # (this is when same_tsg is true)
with m.If(req.valid):
- _ra = req.real_addr[ROW_LINE_BITS:SET_SIZE_BITS]
- sync += r1.wb.adr[0:SET_SIZE_BITS].eq(_ra)
+ _ra = req.real_addr[self.ROW_OFF_BITS:
+ self.SET_SIZE_BITS]
+ alen = self.SET_SIZE_BITS-self.ROW_OFF_BITS
+ sync += r1.wb.adr[0:alen].eq(_ra)
sync += r1.wb.dat.eq(req.data)
sync += r1.wb.sel.eq(req.byte_sel)
with m.If((adjust_acks < 7) & req.same_tag &
- ((req.op == Op.OP_STORE_MISS)
- | (req.op == Op.OP_STORE_HIT))):
+ ((req.op == Op.OP_STORE_MISS) |
+ (req.op == Op.OP_STORE_HIT))):
sync += r1.wb.stb.eq(1)
comb += st_stbs_done.eq(0)
+ sync += r1.store_way.eq(req.hit_way)
+ sync += r1.store_row.eq(self.get_row(req.real_addr))
with m.If(req.op == Op.OP_STORE_HIT):
sync += r1.write_bram.eq(1)
- sync += r1.full.eq(0)
+ sync += r1.full.eq(r1_next_cycle)
sync += r1.slow_valid.eq(1)
# Store requests never come from the MMU
comb += st_stbs_done.eq(1)
# Got ack ? See if complete.
+ sync += Display("got ack %d %d stbs %d adjust_acks %d",
+ bus.ack, bus.ack, st_stbs_done, adjust_acks)
with m.If(bus.ack):
with m.If(st_stbs_done & (adjust_acks == 1)):
sync += r1.state.eq(State.IDLE)
# Got ack ? complete.
with m.If(bus.ack):
sync += r1.state.eq(State.IDLE)
- sync += r1.full.eq(0)
+ sync += r1.full.eq(r1_next_cycle)
sync += r1.slow_valid.eq(1)
- with m.If(~r1.mmu_req):
- sync += r1.ls_valid.eq(1)
- with m.Else():
+ with m.If(r1.mmu_req):
sync += r1.mmu_done.eq(1)
+ with m.Else():
+ sync += r1.ls_valid.eq(1)
sync += r1.forward_sel.eq(~0) # all 1s
sync += r1.use_forward1.eq(1)
def elaborate(self, platform):
m = Module()
- comb = m.d.comb
- d_in = self.d_in
+ comb, sync = m.d.comb, m.d.sync
+ m_in, d_in = self.m_in, self.d_in
# Storage. Hopefully "cache_rows" is a BRAM, the rest is LUTs
- cache_tags = CacheTagArray()
- cache_tag_set = Signal(TAG_RAM_WIDTH)
+ cache_valids = self.CacheValidsArray()
+ cache_tag_set = Signal(self.TAG_RAM_WIDTH)
- # TODO attribute ram_style : string;
- # TODO attribute ram_style of cache_tags : signal is "distributed";
+ self.tagmem = Memory(depth=self.NUM_LINES, width=self.TAG_RAM_WIDTH,
+ attrs={'syn_ramstyle': "block_ram"})
"""note: these are passed to nmigen.hdl.Memory as "attributes".
don't know how, just that they are.
"""
- dtlb = TLBArray()
# TODO attribute ram_style of
# dtlb_tags : signal is "distributed";
# TODO attribute ram_style of
r0 = RegStage0("r0")
r0_full = Signal()
- r1 = RegStage1("r1")
+ r1 = RegStage1(self, "r1")
- reservation = Reservation()
+ reservation = Reservation(self, "rsrv")
# Async signals on incoming request
- req_index = Signal(INDEX_BITS)
- req_row = Signal(ROW_BITS)
- req_hit_way = Signal(WAY_BITS)
- req_tag = Signal(TAG_BITS)
+ req_index = Signal(self.INDEX_BITS)
+ req_row = Signal(self.ROW_BITS)
+ req_hit_way = Signal(self.WAY_BITS)
+ req_tag = Signal(self.TAG_BITS)
req_op = Signal(Op)
req_data = Signal(64)
req_same_tag = Signal()
req_go = Signal()
- early_req_row = Signal(ROW_BITS)
+ early_req_row = Signal(self.ROW_BITS)
cancel_store = Signal()
set_rsrv = Signal()
cache_out_row = Signal(WB_DATA_BITS)
- plru_victim = PLRUOut()
- replace_way = Signal(WAY_BITS)
+ plru_victim = Signal(self.WAY_BITS)
+ replace_way = Signal(self.WAY_BITS)
# Wishbone read/write/cache write formatting signals
bus_sel = Signal(8)
# TLB signals
- tlb_way = TLBRecord("tlb_way")
- tlb_req_index = Signal(TLB_SET_BITS)
- tlb_hit = TLBHit("tlb_hit")
- pte = Signal(TLB_PTE_BITS)
- ra = Signal(REAL_ADDR_BITS)
+ tlb_way = self.TLBRecord("tlb_way")
+ tlb_req_index = Signal(self.TLB_SET_BITS)
+ tlb_hit = self.TLBHit("tlb_hit")
+ pte = Signal(self.TLB_PTE_BITS)
+ ra = Signal(self.REAL_ADDR_BITS)
valid_ra = Signal()
perm_attr = PermAttr("dc_perms")
rc_ok = Signal()
perm_ok = Signal()
access_ok = Signal()
- tlb_plru_victim = TLBPLRUOut()
+ tlb_plru_victim = Signal(self.TLB_WAY_BITS)
# we don't yet handle collisions between loadstore1 requests
# and MMU requests
comb += r0_stall.eq(r0_full & (r1.full | d_in.hold))
comb += r0_valid.eq(r0_full & ~r1.full & ~d_in.hold)
comb += self.stall_out.eq(r0_stall)
+ # debugging: detect if any stall ever requested, which is fine,
+ # but if a request comes in when stall requested, that's bad.
+ with m.If(r0_stall):
+ sync += self.any_stall_out.eq(1)
+ with m.If(d_in.valid):
+ sync += self.dreq_when_stall.eq(1)
+ with m.If(m_in.valid):
+ sync += self.mreq_when_stall.eq(1)
# deal with litex not doing wishbone pipeline mode
# XXX in wrong way. FIFOs are needed in the SRAM test
# so that stb/ack match up. same thing done in icache.py
- comb += self.bus.stall.eq(self.bus.cyc & ~self.bus.ack)
+ if not self.microwatt_compat:
+ comb += self.bus.stall.eq(self.bus.cyc & ~self.bus.ack)
# Wire up wishbone request latch out of stage 1
comb += self.bus.we.eq(r1.wb.we)
comb += self.bus.dat_w.eq(r1.wb.dat)
comb += self.bus.cyc.eq(r1.wb.cyc)
+ # create submodule TLBUpdate
+ m.submodules.dtlb_update = self.dtlb_update = DTLBUpdate(self)
+
# call sub-functions putting everything together, using shared
# signals established above
self.stage_0(m, r0, r1, r0_full)
- self.tlb_read(m, r0_stall, tlb_way, dtlb)
+ self.tlb_read(m, r0_stall, tlb_way)
self.tlb_search(m, tlb_req_index, r0, r0_valid,
tlb_way,
pte, tlb_hit, valid_ra, perm_attr, ra)
- self.tlb_update(m, r0_valid, r0, dtlb, tlb_req_index,
- tlb_hit, tlb_plru_victim,
- tlb_way)
+ self.tlb_update(m, r0_valid, r0, tlb_req_index,
+ tlb_hit, tlb_plru_victim)
self.maybe_plrus(m, r1, plru_victim)
- self.maybe_tlb_plrus(m, r1, tlb_plru_victim)
- self.cache_tag_read(m, r0_stall, req_index, cache_tag_set, cache_tags)
+ self.maybe_tlb_plrus(m, r1, tlb_plru_victim, tlb_req_index)
+ self.cache_tag_read(m, r0_stall, req_index, cache_tag_set)
self.dcache_request(m, r0, ra, req_index, req_row, req_tag,
- r0_valid, r1, cache_tags, replace_way,
+ r0_valid, r1, cache_valids, replace_way,
use_forward1_next, use_forward2_next,
req_hit_way, plru_victim, rc_ok, perm_attr,
valid_ra, perm_ok, access_ok, req_op, req_go,
self.dcache_slow(m, r1, use_forward1_next, use_forward2_next,
r0, replace_way,
req_hit_way, req_same_tag,
- r0_valid, req_op, cache_tags, req_go, ra)
+ r0_valid, req_op, cache_valids, req_go, ra)
#self.dcache_log(m, r1, valid_ra, tlb_hit, stall_out)
return m