+2001-02-19 Benjamin Kosnik <bkoz@purist.soma.redhat.com>
+
+ * configure.in (target_libs): Remove libg++.
+ (noconfigdirs): Remove libg++.
+ (noconfigdirs): Same.
+ (noconfigdirs): Same.
+ (noconfigdirs): Same.
+
+ * config-ml.in: Remove libg++ references.
+
+ * Makefile.in (TARGET_CONFIGDIRS): Remove libio, libstdc++, libg++.
+ (ALL_TARGET_MODULES): Same.
+ (configure-target-libg++): Remove.
+ (all-target-libg++): Remove.
+ (configure-target-libio): Remove.
+ (all-target-libio): Remove.
+ (check-target-libio): Remove.
+ (.PHONY): Remove.
+ (libg++.tar.bz2): Remove.
+ (all-target-cygmon): Remove libio.
+ (all-target-libstdc++): Remove.
+ (configure-target-libstdc++): Remove.
+ (TARGET_LIB_PATH): Remove libstdc++.
+ (ALL_GCC_CXX): Remove libstdc++.
+ (all-target-gperf): Correct.
+
2001-02-16 Nick Clifton <nickc@redhat.com>
* configure.in (noconfigdirs): Allow configuration of texinfo
# This is set by the configure script to the list of directories which
# should be built using the target tools.
-TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib libio librx libstdc++ libg++ winsup opcodes bsp libstub cygmon libf2c libchill libobjc
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libchill libobjc
# Target libraries are put under this directory:
# Changed by configure to $(target_alias) if cross.
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that prorgams built for the target machine work.
-TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:$$r/$(TARGET_SUBDIR)/libstdc++
+TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:
# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
# Some platforms don't like blank entries, so we remove duplicate,
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
ALL_TARGET_MODULES = \
- all-target-libio \
- all-target-libstdc++ \
all-target-libstdc++-v3 \
all-target-librx \
- all-target-libg++ \
all-target-newlib \
all-target-libf2c \
all-target-libchill \
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
CONFIGURE_TARGET_MODULES = \
- configure-target-libio \
- configure-target-libstdc++ \
configure-target-libstdc++-v3 \
configure-target-librx \
- configure-target-libg++ \
configure-target-newlib \
configure-target-libf2c \
configure-target-libchill \
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
- check-target-libio \
- check-target-libstdc++ \
check-target-libstdc++-v3 \
- check-target-libg++ \
check-target-newlib \
check-target-libf2c \
check-target-libchill \
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = \
- install-target-libio \
- install-target-libstdc++ \
install-target-libstdc++-v3 \
- install-target-libg++ \
install-target-newlib \
install-target-libf2c \
install-target-libchill \
# All of the target modules that can be cleaned
CLEAN_TARGET_MODULES = \
- clean-target-libio \
- clean-target-libstdc++ \
clean-target-libstdc++-v3 \
clean-target-librx \
- clean-target-libg++ \
clean-target-newlib \
clean-target-libf2c \
clean-target-libchill \
all-cgen: all-libiberty
all-cvssrc:
configure-target-cygmon: $(ALL_GCC_C)
-all-target-cygmon: configure-target-cygmon all-target-libiberty all-target-libio all-target-libstub all-target-bsp
+all-target-cygmon: configure-target-cygmon all-target-libiberty all-target-libstub all-target-bsp
all-db:
all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-gawk:
ALL_GCC = all-gcc
ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
-ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++ all-target-libstdc++-v3
+ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3
all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui
all-gettext:
all-gnuserv:
configure-target-gperf: $(ALL_GCC_C)
-all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++
+all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3
all-gprof: all-libiberty all-bfd all-opcodes all-intl
all-grep: all-libiberty
all-grez: all-libiberty all-bfd all-opcodes
all-ispell: all-emacs19
all-itcl: all-tcl all-tk all-tcl8.1 all-tk8.1
all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
-configure-target-libg++: $(ALL_GCC_CXX) configure-target-librx
-all-target-libg++: configure-target-libg++ all-target-libiberty all-target-librx
configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: configure-target-libgloss configure-target-newlib
-configure-target-libio: $(ALL_GCC_C)
-all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
-check-target-libio: all-target-libstdc++
all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl
all-libiberty:
configure-target-libffi: $(ALL_GCC_C)
all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
configure-target-librx: $(ALL_GCC_C)
all-target-librx: configure-target-librx
-configure-target-libstdc++: $(ALL_GCC_C)
-all-target-libstdc++: configure-target-libstdc++ all-target-libiberty all-target-libio
configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty
configure-target-libstub: $(ALL_GCC_C)
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
-.PHONY: libg++.tar.bz2
-LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
-libg++.tar.bz2: $(DIST_SUPPORT) libg++
- $(MAKE) -f Makefile.in taz TOOL=libg++ \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
-
GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
$(MAKE) -f Makefile.in taz TOOL=gnats \
# . ${srcdir}/../config-ml.in
# fi
#
-# See librx/configure.in in the libg++ distribution for an example of how
-# to handle autoconf'd libraries.
#
# Things are complicated because 6 separate cases must be handled:
# 2 (native, cross) x 3 (absolute-path, relative-not-dot, dot) = 6.
# The build tree is layed out as
#
# ./
-# libg++
# newlib
# m68020/
-# libg++
# newlib
# m68881/
-# libg++
# newlib
#
# The nice feature about this arrangement is that inter-library references
if [ "${enable_multilib}" = yes ]; then
# Compute whether this is the library's top level directory
-# (ie: not a multilib subdirectory, and not a subdirectory like libg++/src).
+# (ie: not a multilib subdirectory, and not a subdirectory like newlib/src).
# ${with_multisubdir} tells us we're in the right branch, but we could be
# in a subdir of that.
# ??? The previous version could void this test by separating the process into
target-newlib \
target-librx \
${libstdcxx_version} \
- target-libg++ \
target-libf2c \
target-libchill \
${libgcj}
case "${target}" in
*-*-netware)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-newlib target-libiberty target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-newlib target-libiberty target-libgloss ${libgcj}"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
c4x-*-*)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
;;
c54x*-*-* | tic54x-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj} gcc gdb newlib"
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
d10v-*-*)
- noconfigdirs="$noconfigdirs target-librx target-libg++ ${libstdcxx_version} target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-librx ${libstdcxx_version} target-libgloss ${libgcj}"
;;
d30v-*-*)
noconfigdirs="${libgcj}"
;;
h8300*-*-* | \
h8500-*-*)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
;;
hppa*-*-*elf* | \
hppa*-*-linux* | \
esac
;;
i[3456]86-*-pe)
- noconfigdirs="$noconfigdirs target-libg++ ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
;;
i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
sparc-*-solaris*)
;;
v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libg++ ${libstdcxx_version} opcodes target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss ${libgcj}"
;;
v850-*-*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
-# the gcc, libio, libstdc++ and libg++ subdirectories.
+# the gcc and libstdc++-v3 subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
gxx_include_dir=
if test -n "${with_gxx_include_dir}"; then
projects / gcc.git / commitdiff