From: Paul Mackerras <paulus@ozlabs.org>
Date: Tue, 15 Dec 2020 22:34:56 +0000 (+1100)
Subject: core_debug: Stop logging 256 cycles after trigger
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=3361c460b8af108db7c104bf39335a1e5cffb893;p=microwatt.git

core_debug: Stop logging 256 cycles after trigger

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
---

diff --git a/core_debug.vhdl b/core_debug.vhdl
index 09e3e48..a81f7e0 100644
--- a/core_debug.vhdl
+++ b/core_debug.vhdl
@@ -114,6 +114,7 @@ architecture behave of core_debug is
     signal do_dmi_log_rd : std_ulogic;
     signal dmi_read_log_data : std_ulogic;
     signal dmi_read_log_data_1 : std_ulogic;
+    signal log_trigger_delay : integer range 0 to 255 := 0;
 
 begin
        -- Single cycle register accesses on DMI except for GSPR data
@@ -152,9 +153,15 @@ begin
 	    if (rst) then
 		stopping <= '0';
 		terminated <= '0';
+                log_trigger_delay <= 0;
 	    else
-                if do_log_trigger = '1' then
-                    log_dmi_trigger(1) <= '1';
+                if do_log_trigger = '1' or log_trigger_delay /= 0 then
+                    if log_trigger_delay = 255 then
+                        log_dmi_trigger(1) <= '1';
+                        log_trigger_delay <= 0;
+                    else
+                        log_trigger_delay <= log_trigger_delay + 1;
+                    end if;
                 end if;
 		-- Edge detect on dmi_req for 1-shot pulses
 		dmi_req_1 <= dmi_req;