From: Andrew Waterman Date: Fri, 10 Jun 2016 21:30:58 +0000 (-0700) Subject: Test more than one breakpoint at a time, if present X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=654a7a4a85918b73de6e301d7220a6e09bb6587a;p=riscv-tests.git Test more than one breakpoint at a time, if present --- diff --git a/isa/rv64mi/breakpoint.S b/isa/rv64mi/breakpoint.S index 5e4dfbb..848435e 100644 --- a/isa/rv64mi/breakpoint.S +++ b/isa/rv64mi/breakpoint.S @@ -17,86 +17,109 @@ RVTEST_CODE_BEGIN li TESTNUM, 2 # Skip tdrselect is hard-wired. - li t0, 1<<(_RISCV_SZLONG-1) - csrw tdrselect, t0 - csrr t1, tdrselect - bne t0, t1, pass + li a0, 1<<(_RISCV_SZLONG-1) + csrw tdrselect, a0 + csrr a1, tdrselect + bne a0, a1, pass # Make sure there's a breakpoint there. - csrr t0, tdrdata1 - srli t0, t0, _RISCV_SZLONG-4 - li t1, 1 - bne t0, t1, pass - - la t2, 1f - csrw tdrdata2, t2 - li t0, BPCONTROL_M | BPCONTROL_X - csrw tdrdata1, t0 + csrr a0, tdrdata1 + srli a0, a0, _RISCV_SZLONG-4 + li a1, 1 + bne a0, a1, pass + + la a2, 1f + csrw tdrdata2, a2 + li a0, BPCONTROL_M | BPCONTROL_X + csrw tdrdata1, a0 # Skip if breakpoint type is unsupported. - csrr t1, tdrdata1 - andi t1, t1, 0x7ff - bne t0, t1, 2f + csrr a1, tdrdata1 + andi a1, a1, 0x7ff + bne a0, a1, 2f 1: # Trap handler should skip this instruction. j fail # Make sure reads don't trap. li TESTNUM, 3 - lw t0, (t2) + lw a0, (a2) 2: # Set up breakpoint to trap on M-mode reads. li TESTNUM, 4 - li t0, BPCONTROL_M | BPCONTROL_R - csrw tdrdata1, t0 + li a0, BPCONTROL_M | BPCONTROL_R + csrw tdrdata1, a0 # Skip if breakpoint type is unsupported. - csrr t1, tdrdata1 - andi t1, t1, 0x7ff - bne t0, t1, 2f - la t2, write_data - csrw tdrdata2, t2 + csrr a1, tdrdata1 + andi a1, a1, 0x7ff + bne a0, a1, 2f + la a2, data1 + csrw tdrdata2, a2 # Trap handler should skip this instruction. - lw t2, (t2) - beqz t2, fail + lw a2, (a2) + beqz a2, fail # Make sure writes don't trap. li TESTNUM, 5 - sw x0, (t2) + sw x0, (a2) 2: # Set up breakpoint to trap on M-mode stores. li TESTNUM, 6 - li t0, BPCONTROL_M | BPCONTROL_W - csrw tdrdata1, t0 + li a0, BPCONTROL_M | BPCONTROL_W + csrw tdrdata1, a0 # Skip if breakpoint type is unsupported. - csrr t1, tdrdata1 - andi t1, t1, 0x7ff - bne t0, t1, 2f + csrr a1, tdrdata1 + andi a1, a1, 0x7ff + bne a0, a1, 2f # Trap handler should skip this instruction. - sw t2, (t2) + sw a2, (a2) # Make sure store didn't succeed. li TESTNUM, 7 - lw t2, (t2) - bnez t2, fail + lw a2, (a2) + bnez a2, fail + + # Try to set up a second breakpoint. + li a0, (1<<(_RISCV_SZLONG-1)) + 1 + csrw tdrselect, a0 + csrr a1, tdrselect + bne a0, a1, pass + li a0, BPCONTROL_M | BPCONTROL_R + csrw tdrdata1, a0 + la a3, data2 + csrw tdrdata2, a3 + + # Make sure the second breakpoint triggers. + li TESTNUM, 8 + lw a3, (a3) + beqz a3, fail + + # Make sure the first breakpoint still triggers. + li TESTNUM, 10 + la a2, data1 + sw a2, (a2) + li TESTNUM, 11 + lw a2, (a2) + bnez a2, fail 2: TEST_PASSFAIL mtvec_handler: # Only even-numbered tests should trap. - andi a0, TESTNUM, 1 - bnez a0, fail + andi t0, TESTNUM, 1 + bnez t0, fail - li a0, CAUSE_BREAKPOINT - csrr a1, mcause - bne a0, a1, fail + li t0, CAUSE_BREAKPOINT + csrr t1, mcause + bne t0, t1, fail - csrr a0, mepc - addi a0, a0, 4 - csrw mepc, a0 + csrr t0, mepc + addi t0, t0, 4 + csrw mepc, t0 mret RVTEST_CODE_END @@ -106,6 +129,7 @@ RVTEST_DATA_BEGIN TEST_DATA -write_data: .word 0 +data1: .word 0 +data2: .word 0 RVTEST_DATA_END