From: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Date: Tue, 12 Apr 2022 13:22:33 +0000 (+0100)
Subject: move flash-first-phase-initialisation to separate function
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=cae48c32456f7b2c7c203c93f7d9481e2ee2dd3f;p=ls2.git

move flash-first-phase-initialisation to separate function
attempting to execute directly from flash by jumping to it
(after making it run a leeetle bit faster than 100 bytes/sec)
---

diff --git a/coldboot/coldboot.c b/coldboot/coldboot.c
index 1cb82d4..1eea544 100644
--- a/coldboot/coldboot.c
+++ b/coldboot/coldboot.c
@@ -93,22 +93,13 @@ static inline void write_tercel_register(uint8_t reg, uint32_t value)
 
 // TODO: need to use this
 // https://gitlab.raptorengineering.com/kestrel-collaboration/kestrel-firmware/bare-metal-firmware/-/blob/master/main.c#L2328
-static bool fl_read(void *dst, uint32_t offset, uint32_t size)
-{
-    uint8_t *d = dst;
-    memcpy(d, (void *)(unsigned long)(SPI_FLASH_BASE + offset), size);
-    return true;
-}
 
-static unsigned long copy_flash(unsigned int offset, unsigned int dst_offs)
+/* this is a "level 1" speed-up, which gets an initial improvement of 10-50x
+ * over the default speed (which is a scant 100 bytes per second).
+ */
+static void crank_up_qspi_level1(void)
 {
-    Elf64_Ehdr ehdr;
-    Elf64_Phdr ph;
-    unsigned int i, poff, size, off;
-    void *addr;
-
-    // WARNING
-    // KESTREL SPECIFIC
+    // WARNING: KESTREL SPECIFIC
     // Set SPI clock cycle divider to 1
     uint32_t dword;
     dword = read_tercel_register(TERCEL_SPI_REG_SYS_PHY_CFG1);
@@ -122,6 +113,21 @@ static unsigned long copy_flash(unsigned int offset, unsigned int dst_offs)
     dword |= (TERCEL_SPI_FLASH_EN_MULTCYC_READ_MASK <<
               TERCEL_SPI_FLASH_EN_MULTCYC_READ_SHIFT);
     write_tercel_register(TERCEL_SPI_REG_SYS_FLASH_CFG5, dword);
+}
+
+static bool fl_read(void *dst, uint32_t offset, uint32_t size)
+{
+    uint8_t *d = dst;
+    memcpy(d, (void *)(unsigned long)(SPI_FLASH_BASE + offset), size);
+    return true;
+}
+
+static unsigned long copy_flash(unsigned int offset, unsigned int dst_offs)
+{
+    Elf64_Ehdr ehdr;
+    Elf64_Phdr ph;
+    unsigned int i, poff, size, off;
+    void *addr;
 
     puts("Trying flash...\r\n");
     if (!fl_read(&ehdr, offset, sizeof(ehdr)))
@@ -241,6 +247,9 @@ int main(void) {
     puts("\r\n");
 
     if (ftr & SYS_REG_INFO_HAS_SPI_FLASH) {
+        // speed up the QSPI to at least a sane level
+        crank_up_qspi_level1();
+
         puts("SPI Offset: ");
         spi_offs = readl(SYSCON_BASE + SYS_REG_SPI_INFO);
         uart_writeuint32(spi_offs);
@@ -262,7 +271,7 @@ int main(void) {
         puts("\n");
     }
 #endif
-	volatile uint32_t *qspi = (uint32_t*)SPI_FLASH_BASE+spi_offs;
+	volatile uint32_t *qspi = (uint32_t*)SPI_FLASH_BASE;
     //volatile uint8_t *qspi_bytes = (uint8_t*)spi_offs;
      // let's not, eh? writel(0xDEAF0123, (unsigned long)&(qspi[0]));
      // tmp = readl((unsigned long)&(qspi[0]));
@@ -482,6 +491,16 @@ int main(void) {
 #endif
 	puts("done\n");
 
+    // temporary hard-hack: boot directly from QSPI. really
+    // should do something like detect at least... something
+    if ((ftr & SYS_REG_INFO_HAS_SPI_FLASH))
+    {
+        // jump to absolute address
+        mtspr(8, spi_offs); // move address to LR
+        __asm__ volatile("blr");
+        return 0;
+    }
+
     // memcpy from SPI Flash then boot
     if ((ftr & SYS_REG_INFO_HAS_SPI_FLASH) &&
         (failcnt == 0))
diff --git a/hello_world/powerpc.lds b/hello_world/powerpc.lds
deleted file mode 100644
index f3901f4..0000000
--- a/hello_world/powerpc.lds
+++ /dev/null
@@ -1,14 +0,0 @@
-SECTIONS
-{
-	_start = .;
-	start = _start;
-	. = 0;
-	.head : {
-		KEEP(*(.head))
- 	}
-	. = 0x1000;
-	.text : { *(.text) }
-	. = 0x1800;
-	.data : { *(.data) }
-	.bss : { *(.bss) }
-}