From 740f981cfd55604d46598144dccac26dd53f643c Mon Sep 17 00:00:00 2001 From: Andrew Waterman Date: Sun, 12 Jun 2011 20:27:10 -0700 Subject: [PATCH] [sim] renamed to riscv-isa-run --- COPYING | 34 - Makefile.in | 466 -- README | 37 - aclocal.m4 | 345 -- config.h.in | 49 - configure | 5576 ---------------------- configure.ac | 103 - riscv/applink.cc | 154 - riscv/applink.h | 28 - riscv/common.h | 28 - riscv/decode.h | 301 -- riscv/dispatch | 77 - riscv/dispatch.h | 254 - riscv/icsim.cc | 100 - riscv/icsim.h | 52 - riscv/insn_footer.h | 2 - riscv/insn_header.h | 7 - riscv/insns/add.h | 1 - riscv/insns/addi.h | 1 - riscv/insns/addiw.h | 2 - riscv/insns/addw.h | 2 - riscv/insns/amoadd_d.h | 4 - riscv/insns/amoadd_w.h | 3 - riscv/insns/amoand_d.h | 4 - riscv/insns/amoand_w.h | 3 - riscv/insns/amomax_d.h | 4 - riscv/insns/amomax_w.h | 3 - riscv/insns/amomaxu_d.h | 4 - riscv/insns/amomaxu_w.h | 3 - riscv/insns/amomin_d.h | 4 - riscv/insns/amomin_w.h | 3 - riscv/insns/amominu_d.h | 4 - riscv/insns/amominu_w.h | 3 - riscv/insns/amoor_d.h | 4 - riscv/insns/amoor_w.h | 3 - riscv/insns/amoswap_d.h | 4 - riscv/insns/amoswap_w.h | 3 - riscv/insns/and.h | 1 - riscv/insns/andi.h | 1 - riscv/insns/beq.h | 2 - riscv/insns/bge.h | 2 - riscv/insns/bgeu.h | 2 - riscv/insns/blt.h | 2 - riscv/insns/bltu.h | 2 - riscv/insns/bne.h | 2 - riscv/insns/break.h | 1 - riscv/insns/c_add.h | 2 - riscv/insns/c_add3.h | 2 - riscv/insns/c_addi.h | 10 - riscv/insns/c_addiw.h | 3 - riscv/insns/c_and3.h | 2 - riscv/insns/c_beq.h | 3 - riscv/insns/c_bne.h | 3 - riscv/insns/c_fld.h | 3 - riscv/insns/c_flw.h | 3 - riscv/insns/c_fsd.h | 3 - riscv/insns/c_fsw.h | 3 - riscv/insns/c_j.h | 2 - riscv/insns/c_ld.h | 3 - riscv/insns/c_ld0.h | 3 - riscv/insns/c_ldsp.h | 3 - riscv/insns/c_li.h | 2 - riscv/insns/c_lw.h | 2 - riscv/insns/c_lw0.h | 2 - riscv/insns/c_lwsp.h | 2 - riscv/insns/c_move.h | 2 - riscv/insns/c_or3.h | 2 - riscv/insns/c_sd.h | 3 - riscv/insns/c_sdsp.h | 3 - riscv/insns/c_slli.h | 5 - riscv/insns/c_slli32.h | 3 - riscv/insns/c_slliw.h | 3 - riscv/insns/c_srai.h | 5 - riscv/insns/c_srai32.h | 3 - riscv/insns/c_srli.h | 5 - riscv/insns/c_srli32.h | 3 - riscv/insns/c_sub.h | 2 - riscv/insns/c_sub3.h | 2 - riscv/insns/c_sw.h | 2 - riscv/insns/c_swsp.h | 2 - riscv/insns/cflush.h | 1 - riscv/insns/di.h | 4 - riscv/insns/div.h | 6 - riscv/insns/divu.h | 4 - riscv/insns/divuw.h | 5 - riscv/insns/divw.h | 7 - riscv/insns/ei.h | 4 - riscv/insns/eret.h | 5 - riscv/insns/fadd_d.h | 4 - riscv/insns/fadd_s.h | 4 - riscv/insns/fcvt_d_l.h | 5 - riscv/insns/fcvt_d_lu.h | 5 - riscv/insns/fcvt_d_s.h | 4 - riscv/insns/fcvt_d_w.h | 4 - riscv/insns/fcvt_d_wu.h | 4 - riscv/insns/fcvt_l_d.h | 5 - riscv/insns/fcvt_l_s.h | 5 - riscv/insns/fcvt_lu_d.h | 5 - riscv/insns/fcvt_lu_s.h | 5 - riscv/insns/fcvt_s_d.h | 4 - riscv/insns/fcvt_s_l.h | 5 - riscv/insns/fcvt_s_lu.h | 5 - riscv/insns/fcvt_s_w.h | 4 - riscv/insns/fcvt_s_wu.h | 4 - riscv/insns/fcvt_w_d.h | 4 - riscv/insns/fcvt_w_s.h | 4 - riscv/insns/fcvt_wu_d.h | 4 - riscv/insns/fcvt_wu_s.h | 4 - riscv/insns/fdiv_d.h | 4 - riscv/insns/fdiv_s.h | 4 - riscv/insns/fence.h | 0 riscv/insns/fence_g_cv.h | 0 riscv/insns/fence_g_v.h | 0 riscv/insns/fence_i.h | 1 - riscv/insns/fence_l_cv.h | 0 riscv/insns/fence_l_v.h | 0 riscv/insns/feq_d.h | 3 - riscv/insns/feq_s.h | 3 - riscv/insns/fld.h | 2 - riscv/insns/fle_d.h | 3 - riscv/insns/fle_s.h | 3 - riscv/insns/flt_d.h | 3 - riscv/insns/flt_s.h | 3 - riscv/insns/flw.h | 2 - riscv/insns/fmadd_d.h | 4 - riscv/insns/fmadd_s.h | 4 - riscv/insns/fmax_d.h | 4 - riscv/insns/fmax_s.h | 4 - riscv/insns/fmin_d.h | 4 - riscv/insns/fmin_s.h | 4 - riscv/insns/fmovn.h | 2 - riscv/insns/fmovz.h | 2 - riscv/insns/fmsub_d.h | 4 - riscv/insns/fmsub_s.h | 4 - riscv/insns/fmul_d.h | 4 - riscv/insns/fmul_s.h | 4 - riscv/insns/fnmadd_d.h | 4 - riscv/insns/fnmadd_s.h | 4 - riscv/insns/fnmsub_d.h | 4 - riscv/insns/fnmsub_s.h | 4 - riscv/insns/fsd.h | 2 - riscv/insns/fsgnj_d.h | 2 - riscv/insns/fsgnj_s.h | 2 - riscv/insns/fsgnjn_d.h | 2 - riscv/insns/fsgnjn_s.h | 2 - riscv/insns/fsgnjx_d.h | 2 - riscv/insns/fsgnjx_s.h | 2 - riscv/insns/fsqrt_d.h | 4 - riscv/insns/fsqrt_s.h | 4 - riscv/insns/fsub_d.h | 4 - riscv/insns/fsub_s.h | 4 - riscv/insns/fsw.h | 2 - riscv/insns/j.h | 1 - riscv/insns/jal.h | 2 - riscv/insns/jalr_c.h | 3 - riscv/insns/jalr_j.h | 1 - riscv/insns/jalr_r.h | 1 - riscv/insns/lb.h | 1 - riscv/insns/lbu.h | 1 - riscv/insns/ld.h | 2 - riscv/insns/lh.h | 1 - riscv/insns/lhu.h | 1 - riscv/insns/lui.h | 1 - riscv/insns/lw.h | 1 - riscv/insns/lwu.h | 2 - riscv/insns/mffsr.h | 2 - riscv/insns/mfpcr.h | 68 - riscv/insns/mftx_d.h | 3 - riscv/insns/mftx_s.h | 2 - riscv/insns/movn.h | 2 - riscv/insns/movz.h | 2 - riscv/insns/mtfsr.h | 4 - riscv/insns/mtpcr.h | 46 - riscv/insns/mul.h | 1 - riscv/insns/mulh.h | 8 - riscv/insns/mulhsu.h | 8 - riscv/insns/mulhu.h | 4 - riscv/insns/mulw.h | 2 - riscv/insns/mxtf_d.h | 3 - riscv/insns/mxtf_s.h | 2 - riscv/insns/or.h | 1 - riscv/insns/ori.h | 1 - riscv/insns/rdcycle.h | 1 - riscv/insns/rdinstret.h | 1 - riscv/insns/rdnpc.h | 1 - riscv/insns/rdtime.h | 1 - riscv/insns/rem.h | 6 - riscv/insns/remu.h | 4 - riscv/insns/remuw.h | 5 - riscv/insns/remw.h | 7 - riscv/insns/sb.h | 1 - riscv/insns/sd.h | 2 - riscv/insns/sh.h | 1 - riscv/insns/sll.h | 1 - riscv/insns/slli.h | 8 - riscv/insns/slliw.h | 2 - riscv/insns/sllw.h | 2 - riscv/insns/slt.h | 1 - riscv/insns/slti.h | 1 - riscv/insns/sltiu.h | 1 - riscv/insns/sltu.h | 1 - riscv/insns/sra.h | 1 - riscv/insns/srai.h | 8 - riscv/insns/sraiw.h | 2 - riscv/insns/sraw.h | 2 - riscv/insns/srl.h | 4 - riscv/insns/srli.h | 8 - riscv/insns/srliw.h | 2 - riscv/insns/srlw.h | 2 - riscv/insns/stop.h | 3 - riscv/insns/sub.h | 1 - riscv/insns/subw.h | 3 - riscv/insns/sw.h | 1 - riscv/insns/syscall.h | 1 - riscv/insns/utidx.h | 2 - riscv/insns/vf.h | 8 - riscv/insns/vfld.h | 3 - riscv/insns/vflsegd.h | 0 riscv/insns/vflsegstd.h | 0 riscv/insns/vflsegstw.h | 0 riscv/insns/vflsegw.h | 0 riscv/insns/vflstd.h | 3 - riscv/insns/vflstw.h | 3 - riscv/insns/vflw.h | 3 - riscv/insns/vfmst.h | 4 - riscv/insns/vfmsv.h | 5 - riscv/insns/vfmts.h | 4 - riscv/insns/vfmvv.h | 5 - riscv/insns/vfsd.h | 3 - riscv/insns/vfssegd.h | 0 riscv/insns/vfssegstd.h | 0 riscv/insns/vfssegstw.h | 0 riscv/insns/vfssegw.h | 0 riscv/insns/vfsstd.h | 3 - riscv/insns/vfsstw.h | 3 - riscv/insns/vfsw.h | 3 - riscv/insns/vlb.h | 2 - riscv/insns/vlbu.h | 2 - riscv/insns/vld.h | 3 - riscv/insns/vlh.h | 2 - riscv/insns/vlhu.h | 2 - riscv/insns/vlsegb.h | 0 riscv/insns/vlsegbu.h | 0 riscv/insns/vlsegd.h | 0 riscv/insns/vlsegh.h | 0 riscv/insns/vlseghu.h | 0 riscv/insns/vlsegstb.h | 0 riscv/insns/vlsegstbu.h | 0 riscv/insns/vlsegstd.h | 0 riscv/insns/vlsegsth.h | 0 riscv/insns/vlsegsthu.h | 0 riscv/insns/vlsegstw.h | 0 riscv/insns/vlsegstwu.h | 0 riscv/insns/vlsegw.h | 0 riscv/insns/vlsegwu.h | 0 riscv/insns/vlstb.h | 2 - riscv/insns/vlstbu.h | 2 - riscv/insns/vlstd.h | 3 - riscv/insns/vlsth.h | 2 - riscv/insns/vlsthu.h | 2 - riscv/insns/vlstw.h | 2 - riscv/insns/vlstwu.h | 2 - riscv/insns/vlw.h | 2 - riscv/insns/vlwu.h | 2 - riscv/insns/vmst.h | 3 - riscv/insns/vmsv.h | 4 - riscv/insns/vmts.h | 3 - riscv/insns/vmvv.h | 4 - riscv/insns/vsb.h | 2 - riscv/insns/vsd.h | 3 - riscv/insns/vsetvl.h | 3 - riscv/insns/vsh.h | 2 - riscv/insns/vssegb.h | 0 riscv/insns/vssegd.h | 0 riscv/insns/vssegh.h | 0 riscv/insns/vssegstb.h | 0 riscv/insns/vssegstd.h | 0 riscv/insns/vssegsth.h | 0 riscv/insns/vssegstw.h | 0 riscv/insns/vssegw.h | 0 riscv/insns/vsstb.h | 2 - riscv/insns/vsstd.h | 3 - riscv/insns/vssth.h | 2 - riscv/insns/vsstw.h | 2 - riscv/insns/vsw.h | 2 - riscv/insns/vtcfgivl.h | 0 riscv/insns/vvcfgivl.h | 6 - riscv/insns/xor.h | 1 - riscv/insns/xori.h | 1 - riscv/mmu.cc | 104 - riscv/mmu.h | 194 - riscv/opcodes.h | 272 -- riscv/processor.cc | 273 -- riscv/processor.h | 97 - riscv/riscv-isa-run.cc | 63 - riscv/riscv.ac | 37 - riscv/riscv.mk.in | 60 - riscv/sim.cc | 351 -- riscv/sim.h | 66 - riscv/trap.cc | 10 - riscv/trap.h | 43 - scripts/config.guess | 1526 ------ scripts/config.sub | 1663 ------- scripts/install.sh | 238 - scripts/mk-install-dirs.sh | 40 - scripts/vcs-version.sh | 117 - softfloat/8086/OLD-specialize.c | 40 - softfloat/8086/OLD-specialize.h | 379 -- softfloat/8086/platform.h | 38 - softfloat/8086/s_commonNaNToF32UI.c | 17 - softfloat/8086/s_commonNaNToF64UI.c | 19 - softfloat/8086/s_f32UIToCommonNaN.c | 25 - softfloat/8086/s_f64UIToCommonNaN.c | 25 - softfloat/8086/s_isSigNaNF32UI.c | 13 - softfloat/8086/s_isSigNaNF64UI.c | 15 - softfloat/8086/s_propagateNaNF32UI.c | 55 - softfloat/8086/s_propagateNaNF64UI.c | 55 - softfloat/8086/softfloat_raiseFlags.c | 51 - softfloat/8086/softfloat_types.h | 16 - softfloat/8086/specialize.h | 113 - softfloat/f32_add.c | 29 - softfloat/f32_div.c | 96 - softfloat/f32_eq.c | 34 - softfloat/f32_eq_signaling.c | 29 - softfloat/f32_isSignalingNaN.c | 16 - softfloat/f32_le.c | 34 - softfloat/f32_le_quiet.c | 39 - softfloat/f32_lt.c | 34 - softfloat/f32_lt_quiet.c | 39 - softfloat/f32_mul.c | 89 - softfloat/f32_mulAdd.c | 25 - softfloat/f32_rem.c | 124 - softfloat/f32_roundToInt.c | 78 - softfloat/f32_sqrt.c | 74 - softfloat/f32_sub.c | 29 - softfloat/f32_to_f64.c | 47 - softfloat/f32_to_i32.c | 34 - softfloat/f32_to_i32_r_minMag.c | 45 - softfloat/f32_to_i64.c | 44 - softfloat/f32_to_i64_r_minMag.c | 52 - softfloat/f32_to_ui32.c | 33 - softfloat/f32_to_ui32_r_minMag.c | 41 - softfloat/f32_to_ui64.c | 42 - softfloat/f32_to_ui64_r_minMag.c | 45 - softfloat/f64_add.c | 29 - softfloat/f64_div.c | 104 - softfloat/f64_eq.c | 35 - softfloat/f64_eq_signaling.c | 30 - softfloat/f64_isSignalingNaN.c | 16 - softfloat/f64_le.c | 35 - softfloat/f64_le_quiet.c | 40 - softfloat/f64_lt.c | 35 - softfloat/f64_lt_quiet.c | 40 - softfloat/f64_mul.c | 91 - softfloat/f64_mulAdd.c | 25 - softfloat/f64_rem.c | 113 - softfloat/f64_roundToInt.c | 80 - softfloat/f64_sqrt.c | 74 - softfloat/f64_sub.c | 29 - softfloat/f64_to_f32.c | 43 - softfloat/f64_to_i32.c | 30 - softfloat/f64_to_i32_r_minMag.c | 50 - softfloat/f64_to_i64.c | 46 - softfloat/f64_to_i64_r_minMag.c | 52 - softfloat/f64_to_ui32.c | 29 - softfloat/f64_to_ui32_r_minMag.c | 40 - softfloat/f64_to_ui64.c | 41 - softfloat/f64_to_ui64_r_minMag.c | 45 - softfloat/i32_to_f32.c | 21 - softfloat/i32_to_f64.c | 31 - softfloat/i64_to_f32.c | 36 - softfloat/i64_to_f64.c | 21 - softfloat/internals.h | 232 - softfloat/primitives.h | 628 --- softfloat/s_add128.c | 17 - softfloat/s_add192.c | 30 - softfloat/s_addMagsF32.c | 75 - softfloat/s_addMagsF64.c | 77 - softfloat/s_countLeadingZeros32.c | 22 - softfloat/s_countLeadingZeros64.c | 32 - softfloat/s_countLeadingZeros8.c | 24 - softfloat/s_eq128.c | 13 - softfloat/s_estimateDiv128To64.c | 28 - softfloat/s_estimateSqrt32.c | 37 - softfloat/s_le128.c | 13 - softfloat/s_lt128.c | 13 - softfloat/s_mul128By64To192.c | 20 - softfloat/s_mul128To256.c | 28 - softfloat/s_mul64To128.c | 28 - softfloat/s_mulAddF32.c | 171 - softfloat/s_mulAddF64.c | 188 - softfloat/s_normRoundPackToF32.c | 24 - softfloat/s_normRoundPackToF64.c | 24 - softfloat/s_normSubnormalF32Sig.c | 18 - softfloat/s_normSubnormalF64Sig.c | 18 - softfloat/s_roundPackToF32.c | 65 - softfloat/s_roundPackToF64.c | 66 - softfloat/s_roundPackToI32.c | 48 - softfloat/s_roundPackToI64.c | 52 - softfloat/s_roundPackToUI32.c | 44 - softfloat/s_roundPackToUI64.c | 46 - softfloat/s_shift128ExtraRightJam.c | 38 - softfloat/s_shift128RightJam.c | 31 - softfloat/s_shift32RightJam.c | 15 - softfloat/s_shift64ExtraRightJam.c | 23 - softfloat/s_shift64RightJam.c | 15 - softfloat/s_shortShift128ExtraRightJam.c | 20 - softfloat/s_shortShift128Left.c | 16 - softfloat/s_shortShift128Right.c | 16 - softfloat/s_shortShift192Left.c | 20 - softfloat/s_shortShift32Right1Jam.c | 12 - softfloat/s_shortShift64ExtraRightJam.c | 17 - softfloat/s_shortShift64RightJam.c | 12 - softfloat/s_sub128.c | 17 - softfloat/s_sub192.c | 30 - softfloat/s_subMagsF32.c | 81 - softfloat/s_subMagsF64.c | 81 - softfloat/softfloat.ac | 0 softfloat/softfloat.h | 233 - softfloat/softfloat.mk.in | 113 - softfloat/softfloat_state.c | 19 - softfloat/ui32_to_f32.c | 25 - softfloat/ui32_to_f64.c | 26 - softfloat/ui64_to_f32.c | 31 - softfloat/ui64_to_f64.c | 25 - softfloat_riscv/platform.h | 42 - softfloat_riscv/s_commonNaNToF32UI.c | 17 - softfloat_riscv/s_commonNaNToF64UI.c | 18 - softfloat_riscv/s_f32UIToCommonNaN.c | 25 - softfloat_riscv/s_f64UIToCommonNaN.c | 25 - softfloat_riscv/s_isSigNaNF32UI.c | 13 - softfloat_riscv/s_isSigNaNF64UI.c | 15 - softfloat_riscv/s_propagateNaNF32UI.c | 55 - softfloat_riscv/s_propagateNaNF64UI.c | 55 - softfloat_riscv/softfloat_raiseFlags.c | 51 - softfloat_riscv/softfloat_riscv.ac | 0 softfloat_riscv/softfloat_riscv.mk.in | 21 - softfloat_riscv/softfloat_types.h | 16 - softfloat_riscv/specialize.h | 113 - 439 files changed, 20316 deletions(-) delete mode 100644 COPYING delete mode 100644 Makefile.in delete mode 100644 README delete mode 100644 aclocal.m4 delete mode 100644 config.h.in delete mode 100755 configure delete mode 100644 configure.ac delete mode 100644 riscv/applink.cc delete mode 100644 riscv/applink.h delete mode 100644 riscv/common.h delete mode 100644 riscv/decode.h delete mode 100755 riscv/dispatch delete mode 100644 riscv/dispatch.h delete mode 100644 riscv/icsim.cc delete mode 100644 riscv/icsim.h delete mode 100644 riscv/insn_footer.h delete mode 100644 riscv/insn_header.h delete mode 100644 riscv/insns/add.h delete mode 100644 riscv/insns/addi.h delete mode 100644 riscv/insns/addiw.h delete mode 100644 riscv/insns/addw.h delete mode 100644 riscv/insns/amoadd_d.h delete mode 100644 riscv/insns/amoadd_w.h delete mode 100644 riscv/insns/amoand_d.h delete mode 100644 riscv/insns/amoand_w.h delete mode 100644 riscv/insns/amomax_d.h delete mode 100644 riscv/insns/amomax_w.h delete mode 100644 riscv/insns/amomaxu_d.h delete mode 100644 riscv/insns/amomaxu_w.h delete mode 100644 riscv/insns/amomin_d.h delete mode 100644 riscv/insns/amomin_w.h delete mode 100644 riscv/insns/amominu_d.h delete mode 100644 riscv/insns/amominu_w.h delete mode 100644 riscv/insns/amoor_d.h delete mode 100644 riscv/insns/amoor_w.h delete mode 100644 riscv/insns/amoswap_d.h delete mode 100644 riscv/insns/amoswap_w.h delete mode 100644 riscv/insns/and.h delete mode 100644 riscv/insns/andi.h delete mode 100644 riscv/insns/beq.h delete mode 100644 riscv/insns/bge.h delete mode 100644 riscv/insns/bgeu.h delete mode 100644 riscv/insns/blt.h delete mode 100644 riscv/insns/bltu.h delete mode 100644 riscv/insns/bne.h delete mode 100644 riscv/insns/break.h delete mode 100644 riscv/insns/c_add.h delete mode 100644 riscv/insns/c_add3.h delete mode 100644 riscv/insns/c_addi.h delete mode 100644 riscv/insns/c_addiw.h delete mode 100644 riscv/insns/c_and3.h delete mode 100644 riscv/insns/c_beq.h delete mode 100644 riscv/insns/c_bne.h delete mode 100644 riscv/insns/c_fld.h delete mode 100644 riscv/insns/c_flw.h delete mode 100644 riscv/insns/c_fsd.h delete mode 100644 riscv/insns/c_fsw.h delete mode 100644 riscv/insns/c_j.h delete mode 100644 riscv/insns/c_ld.h delete mode 100644 riscv/insns/c_ld0.h delete mode 100644 riscv/insns/c_ldsp.h delete mode 100644 riscv/insns/c_li.h delete mode 100644 riscv/insns/c_lw.h delete mode 100644 riscv/insns/c_lw0.h delete mode 100644 riscv/insns/c_lwsp.h delete mode 100644 riscv/insns/c_move.h delete mode 100644 riscv/insns/c_or3.h delete mode 100644 riscv/insns/c_sd.h delete mode 100644 riscv/insns/c_sdsp.h delete mode 100644 riscv/insns/c_slli.h delete mode 100644 riscv/insns/c_slli32.h delete mode 100644 riscv/insns/c_slliw.h delete mode 100644 riscv/insns/c_srai.h delete mode 100644 riscv/insns/c_srai32.h delete mode 100644 riscv/insns/c_srli.h delete mode 100644 riscv/insns/c_srli32.h delete mode 100644 riscv/insns/c_sub.h delete mode 100644 riscv/insns/c_sub3.h delete mode 100644 riscv/insns/c_sw.h delete mode 100644 riscv/insns/c_swsp.h delete mode 100644 riscv/insns/cflush.h delete mode 100644 riscv/insns/di.h delete mode 100644 riscv/insns/div.h delete mode 100644 riscv/insns/divu.h delete mode 100644 riscv/insns/divuw.h delete mode 100644 riscv/insns/divw.h delete mode 100644 riscv/insns/ei.h delete mode 100644 riscv/insns/eret.h delete mode 100644 riscv/insns/fadd_d.h delete mode 100644 riscv/insns/fadd_s.h delete mode 100644 riscv/insns/fcvt_d_l.h delete mode 100644 riscv/insns/fcvt_d_lu.h delete mode 100644 riscv/insns/fcvt_d_s.h delete mode 100644 riscv/insns/fcvt_d_w.h delete mode 100644 riscv/insns/fcvt_d_wu.h delete mode 100644 riscv/insns/fcvt_l_d.h delete mode 100644 riscv/insns/fcvt_l_s.h delete mode 100644 riscv/insns/fcvt_lu_d.h delete mode 100644 riscv/insns/fcvt_lu_s.h delete mode 100644 riscv/insns/fcvt_s_d.h delete mode 100644 riscv/insns/fcvt_s_l.h delete mode 100644 riscv/insns/fcvt_s_lu.h delete mode 100644 riscv/insns/fcvt_s_w.h delete mode 100644 riscv/insns/fcvt_s_wu.h delete mode 100644 riscv/insns/fcvt_w_d.h delete mode 100644 riscv/insns/fcvt_w_s.h delete mode 100644 riscv/insns/fcvt_wu_d.h delete mode 100644 riscv/insns/fcvt_wu_s.h delete mode 100644 riscv/insns/fdiv_d.h delete mode 100644 riscv/insns/fdiv_s.h delete mode 100644 riscv/insns/fence.h delete mode 100644 riscv/insns/fence_g_cv.h delete mode 100644 riscv/insns/fence_g_v.h delete mode 100644 riscv/insns/fence_i.h delete mode 100644 riscv/insns/fence_l_cv.h delete mode 100644 riscv/insns/fence_l_v.h delete mode 100644 riscv/insns/feq_d.h delete mode 100644 riscv/insns/feq_s.h delete mode 100644 riscv/insns/fld.h delete mode 100644 riscv/insns/fle_d.h delete mode 100644 riscv/insns/fle_s.h delete mode 100644 riscv/insns/flt_d.h delete mode 100644 riscv/insns/flt_s.h delete mode 100644 riscv/insns/flw.h delete mode 100644 riscv/insns/fmadd_d.h delete mode 100644 riscv/insns/fmadd_s.h delete mode 100644 riscv/insns/fmax_d.h delete mode 100644 riscv/insns/fmax_s.h delete mode 100644 riscv/insns/fmin_d.h delete mode 100644 riscv/insns/fmin_s.h delete mode 100644 riscv/insns/fmovn.h delete mode 100644 riscv/insns/fmovz.h delete mode 100644 riscv/insns/fmsub_d.h delete mode 100644 riscv/insns/fmsub_s.h delete mode 100644 riscv/insns/fmul_d.h delete mode 100644 riscv/insns/fmul_s.h delete mode 100644 riscv/insns/fnmadd_d.h delete mode 100644 riscv/insns/fnmadd_s.h delete mode 100644 riscv/insns/fnmsub_d.h delete mode 100644 riscv/insns/fnmsub_s.h delete mode 100644 riscv/insns/fsd.h delete mode 100644 riscv/insns/fsgnj_d.h delete mode 100644 riscv/insns/fsgnj_s.h delete mode 100644 riscv/insns/fsgnjn_d.h delete mode 100644 riscv/insns/fsgnjn_s.h delete mode 100644 riscv/insns/fsgnjx_d.h delete mode 100644 riscv/insns/fsgnjx_s.h delete mode 100644 riscv/insns/fsqrt_d.h delete mode 100644 riscv/insns/fsqrt_s.h delete mode 100644 riscv/insns/fsub_d.h delete mode 100644 riscv/insns/fsub_s.h delete mode 100644 riscv/insns/fsw.h delete mode 100644 riscv/insns/j.h delete mode 100644 riscv/insns/jal.h delete mode 100644 riscv/insns/jalr_c.h delete mode 100644 riscv/insns/jalr_j.h delete mode 100644 riscv/insns/jalr_r.h delete mode 100644 riscv/insns/lb.h delete mode 100644 riscv/insns/lbu.h delete mode 100644 riscv/insns/ld.h delete mode 100644 riscv/insns/lh.h delete mode 100644 riscv/insns/lhu.h delete mode 100644 riscv/insns/lui.h delete mode 100644 riscv/insns/lw.h delete mode 100644 riscv/insns/lwu.h delete mode 100644 riscv/insns/mffsr.h delete mode 100644 riscv/insns/mfpcr.h delete mode 100644 riscv/insns/mftx_d.h delete mode 100644 riscv/insns/mftx_s.h delete mode 100644 riscv/insns/movn.h delete mode 100644 riscv/insns/movz.h delete mode 100644 riscv/insns/mtfsr.h delete mode 100644 riscv/insns/mtpcr.h delete mode 100644 riscv/insns/mul.h delete mode 100644 riscv/insns/mulh.h delete mode 100644 riscv/insns/mulhsu.h delete mode 100644 riscv/insns/mulhu.h delete mode 100644 riscv/insns/mulw.h delete mode 100644 riscv/insns/mxtf_d.h delete mode 100644 riscv/insns/mxtf_s.h delete mode 100644 riscv/insns/or.h delete mode 100644 riscv/insns/ori.h delete mode 100644 riscv/insns/rdcycle.h delete mode 100644 riscv/insns/rdinstret.h delete mode 100644 riscv/insns/rdnpc.h delete mode 100644 riscv/insns/rdtime.h delete mode 100644 riscv/insns/rem.h delete mode 100644 riscv/insns/remu.h delete mode 100644 riscv/insns/remuw.h delete mode 100644 riscv/insns/remw.h delete mode 100644 riscv/insns/sb.h delete mode 100644 riscv/insns/sd.h delete mode 100644 riscv/insns/sh.h delete mode 100644 riscv/insns/sll.h delete mode 100644 riscv/insns/slli.h delete mode 100644 riscv/insns/slliw.h delete mode 100644 riscv/insns/sllw.h delete mode 100644 riscv/insns/slt.h delete mode 100644 riscv/insns/slti.h delete mode 100644 riscv/insns/sltiu.h delete mode 100644 riscv/insns/sltu.h delete mode 100644 riscv/insns/sra.h delete mode 100644 riscv/insns/srai.h delete mode 100644 riscv/insns/sraiw.h delete mode 100644 riscv/insns/sraw.h delete mode 100644 riscv/insns/srl.h delete mode 100644 riscv/insns/srli.h delete mode 100644 riscv/insns/srliw.h delete mode 100644 riscv/insns/srlw.h delete mode 100644 riscv/insns/stop.h delete mode 100644 riscv/insns/sub.h delete mode 100644 riscv/insns/subw.h delete mode 100644 riscv/insns/sw.h delete mode 100644 riscv/insns/syscall.h delete mode 100644 riscv/insns/utidx.h delete mode 100644 riscv/insns/vf.h delete mode 100644 riscv/insns/vfld.h delete mode 100644 riscv/insns/vflsegd.h delete mode 100644 riscv/insns/vflsegstd.h delete mode 100644 riscv/insns/vflsegstw.h delete mode 100644 riscv/insns/vflsegw.h delete mode 100644 riscv/insns/vflstd.h delete mode 100644 riscv/insns/vflstw.h delete mode 100644 riscv/insns/vflw.h delete mode 100644 riscv/insns/vfmst.h delete mode 100644 riscv/insns/vfmsv.h delete mode 100644 riscv/insns/vfmts.h delete mode 100644 riscv/insns/vfmvv.h delete mode 100644 riscv/insns/vfsd.h delete mode 100644 riscv/insns/vfssegd.h delete mode 100644 riscv/insns/vfssegstd.h delete mode 100644 riscv/insns/vfssegstw.h delete mode 100644 riscv/insns/vfssegw.h delete mode 100644 riscv/insns/vfsstd.h delete mode 100644 riscv/insns/vfsstw.h delete mode 100644 riscv/insns/vfsw.h delete mode 100644 riscv/insns/vlb.h delete mode 100644 riscv/insns/vlbu.h delete mode 100644 riscv/insns/vld.h delete mode 100644 riscv/insns/vlh.h delete mode 100644 riscv/insns/vlhu.h delete mode 100644 riscv/insns/vlsegb.h delete mode 100644 riscv/insns/vlsegbu.h delete mode 100644 riscv/insns/vlsegd.h delete mode 100644 riscv/insns/vlsegh.h delete mode 100644 riscv/insns/vlseghu.h delete mode 100644 riscv/insns/vlsegstb.h delete mode 100644 riscv/insns/vlsegstbu.h delete mode 100644 riscv/insns/vlsegstd.h delete mode 100644 riscv/insns/vlsegsth.h delete mode 100644 riscv/insns/vlsegsthu.h delete mode 100644 riscv/insns/vlsegstw.h delete mode 100644 riscv/insns/vlsegstwu.h delete mode 100644 riscv/insns/vlsegw.h delete mode 100644 riscv/insns/vlsegwu.h delete mode 100644 riscv/insns/vlstb.h delete mode 100644 riscv/insns/vlstbu.h delete mode 100644 riscv/insns/vlstd.h delete mode 100644 riscv/insns/vlsth.h delete mode 100644 riscv/insns/vlsthu.h delete mode 100644 riscv/insns/vlstw.h delete mode 100644 riscv/insns/vlstwu.h delete mode 100644 riscv/insns/vlw.h delete mode 100644 riscv/insns/vlwu.h delete mode 100644 riscv/insns/vmst.h delete mode 100644 riscv/insns/vmsv.h delete mode 100644 riscv/insns/vmts.h delete mode 100644 riscv/insns/vmvv.h delete mode 100644 riscv/insns/vsb.h delete mode 100644 riscv/insns/vsd.h delete mode 100644 riscv/insns/vsetvl.h delete mode 100644 riscv/insns/vsh.h delete mode 100644 riscv/insns/vssegb.h delete mode 100644 riscv/insns/vssegd.h delete mode 100644 riscv/insns/vssegh.h delete mode 100644 riscv/insns/vssegstb.h delete mode 100644 riscv/insns/vssegstd.h delete mode 100644 riscv/insns/vssegsth.h delete mode 100644 riscv/insns/vssegstw.h delete mode 100644 riscv/insns/vssegw.h delete mode 100644 riscv/insns/vsstb.h delete mode 100644 riscv/insns/vsstd.h delete mode 100644 riscv/insns/vssth.h delete mode 100644 riscv/insns/vsstw.h delete mode 100644 riscv/insns/vsw.h delete mode 100644 riscv/insns/vtcfgivl.h delete mode 100644 riscv/insns/vvcfgivl.h delete mode 100644 riscv/insns/xor.h delete mode 100644 riscv/insns/xori.h delete mode 100644 riscv/mmu.cc delete mode 100644 riscv/mmu.h delete mode 100644 riscv/opcodes.h delete mode 100644 riscv/processor.cc delete mode 100644 riscv/processor.h delete mode 100644 riscv/riscv-isa-run.cc delete mode 100644 riscv/riscv.ac delete mode 100644 riscv/riscv.mk.in delete mode 100644 riscv/sim.cc delete mode 100644 riscv/sim.h delete mode 100644 riscv/trap.cc delete mode 100644 riscv/trap.h delete mode 100755 scripts/config.guess delete mode 100755 scripts/config.sub delete mode 100755 scripts/install.sh delete mode 100755 scripts/mk-install-dirs.sh delete mode 100755 scripts/vcs-version.sh delete mode 100755 softfloat/8086/OLD-specialize.c delete mode 100755 softfloat/8086/OLD-specialize.h delete mode 100755 softfloat/8086/platform.h delete mode 100755 softfloat/8086/s_commonNaNToF32UI.c delete mode 100755 softfloat/8086/s_commonNaNToF64UI.c delete mode 100755 softfloat/8086/s_f32UIToCommonNaN.c delete mode 100755 softfloat/8086/s_f64UIToCommonNaN.c delete mode 100755 softfloat/8086/s_isSigNaNF32UI.c delete mode 100755 softfloat/8086/s_isSigNaNF64UI.c delete mode 100755 softfloat/8086/s_propagateNaNF32UI.c delete mode 100755 softfloat/8086/s_propagateNaNF64UI.c delete mode 100755 softfloat/8086/softfloat_raiseFlags.c delete mode 100755 softfloat/8086/softfloat_types.h delete mode 100755 softfloat/8086/specialize.h delete mode 100755 softfloat/f32_add.c delete mode 100755 softfloat/f32_div.c delete mode 100755 softfloat/f32_eq.c delete mode 100755 softfloat/f32_eq_signaling.c delete mode 100755 softfloat/f32_isSignalingNaN.c delete mode 100755 softfloat/f32_le.c delete mode 100755 softfloat/f32_le_quiet.c delete mode 100755 softfloat/f32_lt.c delete mode 100755 softfloat/f32_lt_quiet.c delete mode 100755 softfloat/f32_mul.c delete mode 100755 softfloat/f32_mulAdd.c delete mode 100755 softfloat/f32_rem.c delete mode 100755 softfloat/f32_roundToInt.c delete mode 100755 softfloat/f32_sqrt.c delete mode 100755 softfloat/f32_sub.c delete mode 100755 softfloat/f32_to_f64.c delete mode 100755 softfloat/f32_to_i32.c delete mode 100755 softfloat/f32_to_i32_r_minMag.c delete mode 100755 softfloat/f32_to_i64.c delete mode 100755 softfloat/f32_to_i64_r_minMag.c delete mode 100755 softfloat/f32_to_ui32.c delete mode 100755 softfloat/f32_to_ui32_r_minMag.c delete mode 100755 softfloat/f32_to_ui64.c delete mode 100755 softfloat/f32_to_ui64_r_minMag.c delete mode 100755 softfloat/f64_add.c delete mode 100755 softfloat/f64_div.c delete mode 100755 softfloat/f64_eq.c delete mode 100755 softfloat/f64_eq_signaling.c delete mode 100755 softfloat/f64_isSignalingNaN.c delete mode 100755 softfloat/f64_le.c delete mode 100755 softfloat/f64_le_quiet.c delete mode 100755 softfloat/f64_lt.c delete mode 100755 softfloat/f64_lt_quiet.c delete mode 100755 softfloat/f64_mul.c delete mode 100755 softfloat/f64_mulAdd.c delete mode 100755 softfloat/f64_rem.c delete mode 100755 softfloat/f64_roundToInt.c delete mode 100755 softfloat/f64_sqrt.c delete mode 100755 softfloat/f64_sub.c delete mode 100755 softfloat/f64_to_f32.c delete mode 100755 softfloat/f64_to_i32.c delete mode 100755 softfloat/f64_to_i32_r_minMag.c delete mode 100755 softfloat/f64_to_i64.c delete mode 100755 softfloat/f64_to_i64_r_minMag.c delete mode 100755 softfloat/f64_to_ui32.c delete mode 100755 softfloat/f64_to_ui32_r_minMag.c delete mode 100755 softfloat/f64_to_ui64.c delete mode 100755 softfloat/f64_to_ui64_r_minMag.c delete mode 100755 softfloat/i32_to_f32.c delete mode 100755 softfloat/i32_to_f64.c delete mode 100755 softfloat/i64_to_f32.c delete mode 100755 softfloat/i64_to_f64.c delete mode 100755 softfloat/internals.h delete mode 100755 softfloat/primitives.h delete mode 100755 softfloat/s_add128.c delete mode 100755 softfloat/s_add192.c delete mode 100755 softfloat/s_addMagsF32.c delete mode 100755 softfloat/s_addMagsF64.c delete mode 100755 softfloat/s_countLeadingZeros32.c delete mode 100755 softfloat/s_countLeadingZeros64.c delete mode 100755 softfloat/s_countLeadingZeros8.c delete mode 100755 softfloat/s_eq128.c delete mode 100755 softfloat/s_estimateDiv128To64.c delete mode 100755 softfloat/s_estimateSqrt32.c delete mode 100755 softfloat/s_le128.c delete mode 100755 softfloat/s_lt128.c delete mode 100755 softfloat/s_mul128By64To192.c delete mode 100755 softfloat/s_mul128To256.c delete mode 100755 softfloat/s_mul64To128.c delete mode 100755 softfloat/s_mulAddF32.c delete mode 100755 softfloat/s_mulAddF64.c delete mode 100755 softfloat/s_normRoundPackToF32.c delete mode 100755 softfloat/s_normRoundPackToF64.c delete mode 100755 softfloat/s_normSubnormalF32Sig.c delete mode 100755 softfloat/s_normSubnormalF64Sig.c delete mode 100755 softfloat/s_roundPackToF32.c delete mode 100755 softfloat/s_roundPackToF64.c delete mode 100755 softfloat/s_roundPackToI32.c delete mode 100755 softfloat/s_roundPackToI64.c delete mode 100755 softfloat/s_roundPackToUI32.c delete mode 100755 softfloat/s_roundPackToUI64.c delete mode 100755 softfloat/s_shift128ExtraRightJam.c delete mode 100755 softfloat/s_shift128RightJam.c delete mode 100755 softfloat/s_shift32RightJam.c delete mode 100755 softfloat/s_shift64ExtraRightJam.c delete mode 100755 softfloat/s_shift64RightJam.c delete mode 100755 softfloat/s_shortShift128ExtraRightJam.c delete mode 100755 softfloat/s_shortShift128Left.c delete mode 100755 softfloat/s_shortShift128Right.c delete mode 100755 softfloat/s_shortShift192Left.c delete mode 100755 softfloat/s_shortShift32Right1Jam.c delete mode 100755 softfloat/s_shortShift64ExtraRightJam.c delete mode 100755 softfloat/s_shortShift64RightJam.c delete mode 100755 softfloat/s_sub128.c delete mode 100755 softfloat/s_sub192.c delete mode 100755 softfloat/s_subMagsF32.c delete mode 100755 softfloat/s_subMagsF64.c delete mode 100644 softfloat/softfloat.ac delete mode 100755 softfloat/softfloat.h delete mode 100644 softfloat/softfloat.mk.in delete mode 100755 softfloat/softfloat_state.c delete mode 100755 softfloat/ui32_to_f32.c delete mode 100755 softfloat/ui32_to_f64.c delete mode 100755 softfloat/ui64_to_f32.c delete mode 100755 softfloat/ui64_to_f64.c delete mode 100755 softfloat_riscv/platform.h delete mode 100755 softfloat_riscv/s_commonNaNToF32UI.c delete mode 100755 softfloat_riscv/s_commonNaNToF64UI.c delete mode 100755 softfloat_riscv/s_f32UIToCommonNaN.c delete mode 100755 softfloat_riscv/s_f64UIToCommonNaN.c delete mode 100755 softfloat_riscv/s_isSigNaNF32UI.c delete mode 100755 softfloat_riscv/s_isSigNaNF64UI.c delete mode 100755 softfloat_riscv/s_propagateNaNF32UI.c delete mode 100755 softfloat_riscv/s_propagateNaNF64UI.c delete mode 100755 softfloat_riscv/softfloat_raiseFlags.c delete mode 100644 softfloat_riscv/softfloat_riscv.ac delete mode 100644 softfloat_riscv/softfloat_riscv.mk.in delete mode 100755 softfloat_riscv/softfloat_types.h delete mode 100755 softfloat_riscv/specialize.h diff --git a/COPYING b/COPYING deleted file mode 100644 index 89b65a1..0000000 --- a/COPYING +++ /dev/null @@ -1,34 +0,0 @@ -========================================================================== -Copyright License -========================================================================== - -Copyright (c) 2008, Christopher Batten -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are -met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions, and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions, and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of the Massachusetts Institute of Technology nor the - names of its contributors may be used to endorse or promote products - derived from this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY Christopher Batten ''AS IS'' AND ANY -EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL Christopher Batten BE LIABLE -FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF -THE POSSIBILITY OF SUCH DAMAGE. - diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index 53dfb60..0000000 --- a/Makefile.in +++ /dev/null @@ -1,466 +0,0 @@ -#========================================================================= -# Toplevel Makefile for the Modular C++ Build System -#========================================================================= -# Please read the documenation in 'mcppbs-doc.txt' for more details on -# how the Modular C++ Build System works. For most projects, a developer -# will not need to make any changes to this makefile. The key targets -# are as follows: -# -# - default : build all libraries and programs -# - check : build and run all unit tests -# - install : install headers, project library, and some programs -# - clean : remove all generated content (except autoconf files) -# - dist : make a source tarball -# - distcheck : make a source tarball, untar it, check it, clean it -# - distclean : remove everything -# - -#------------------------------------------------------------------------- -# Basic setup -#------------------------------------------------------------------------- - -# Remove all default implicit rules since they can cause subtle bugs -# and they just make things run slower -.SUFFIXES: -% : %,v -% : RCS/%,v -% : RCS/% -% : s.% -% : SCCS/s.% - -# Default is to build the prereqs of the all target (defined at bottom) -default : all -.PHONY : default - -project_name := @PACKAGE_TARNAME@ -src_dir := @srcdir@ -scripts_dir := $(src_dir)/scripts - -# If the version information is not in the configure script, then we -# assume that we are in a working directory. We use the vcs-version.sh -# script in the scripts directory to generate an appropriate version -# string. Currently the way things are setup we have to run this script -# everytime we run make so the script needs to be as fast as possible. - -ifeq (@PACKAGE_VERSION@,?) - project_ver:=$(shell $(scripts_dir)/vcs-version.sh $(src_dir)) -else - project_ver:=@PACKAGE_VERSION@ -endif - -# Installation directories - -prefix := @prefix@ -enable_stow := @enable_stow@ - -ifeq ($(enable_stow),yes) - stow_pkg_dir := $(prefix)/pkgs - DESTDIR ?= $(stow_pkg_dir)/$(project_name)-$(project_ver) -else - DESTDIR ?= $(prefix) -endif - -install_hdrs_dir := $(DESTDIR)/include/$(project_name) -install_libs_dir := $(DESTDIR)/lib/$(project_name) -install_exes_dir := $(DESTDIR)/bin - -#------------------------------------------------------------------------- -# List of subprojects -#------------------------------------------------------------------------- - -sprojs := @subprojects@ -sprojs_enabled := @subprojects_enabled@ - -sprojs_include := -I. $(addprefix -I$(src_dir)/, $(sprojs_enabled)) -VPATH := $(addprefix $(src_dir)/, $(sprojs_enabled)) - -#------------------------------------------------------------------------- -# Programs and flags -#------------------------------------------------------------------------- - -# C++ compiler -# - CPPFLAGS : flags for the preprocessor (eg. -I,-D) -# - CXXFLAGS : flags for C++ compiler (eg. -Wall,-g,-O3) - -CC := @CC@ -CXX := @CXX@ -CPPFLAGS := @CPPFLAGS@ -CXXFLAGS := @CXXFLAGS@ -COMPILE := $(CXX) -MMD -MP $(CPPFLAGS) $(CXXFLAGS) \ - $(sprojs_include) -COMPILE_C := $(CC) -MMD -MP $(CPPFLAGS) $(CXXFLAGS) \ - $(sprojs_include) -# Linker -# - LDFLAGS : Flags for the linker (eg. -L) -# - LIBS : Library flags (eg. -l) - -LD := $(CXX) -LDFLAGS := @LDFLAGS@ -LIBS := @LIBS@ -LINK := $(LD) $(LDFLAGS) - -# Library creation - -AR := @AR@ -RANLIB := @RANLIB@ - -# Host simulator - -RUN := @RUN@ -RUNFLAGS := @RUNFLAGS@ - -# Installation - -MKINSTALLDIRS := $(scripts_dir)/mk-install-dirs.sh -INSTALL := @INSTALL@ -INSTALL_HDR := $(INSTALL) -m 444 -INSTALL_LIB := $(INSTALL) -m 644 -INSTALL_EXE := $(INSTALL) -m 555 -STOW := @stow@ - -#------------------------------------------------------------------------- -# Include subproject makefile fragments -#------------------------------------------------------------------------- - -sprojs_mk = $(addsuffix .mk, $(sprojs_enabled)) - --include $(sprojs_mk) - -dist_junk += $(sprojs_mk) - -#------------------------------------------------------------------------- -# Reverse list helper function -#------------------------------------------------------------------------- -# This function is used by the subproject template to reverse the list -# of dependencies. It uses recursion to perform the reversal. -# -# Arguments: -# $(1) : space separated input list -# retval : input list in reverse order -# - -reverse_list = $(call reverse_list_h,$(1),) -define reverse_list_h - $(if $(strip $(1)), \ - $(call reverse_list_h, \ - $(wordlist 2,$(words $(1)),$(1)), \ - $(firstword $(1)) $(2)), \ - $(2)) -endef - -#------------------------------------------------------------------------- -# Template for per subproject rules -#------------------------------------------------------------------------- -# The template is instantiated for each of the subprojects. It relies on -# subprojects defining a certain set of make variables which are all -# prefixed with the subproject name. Since subproject names can have -# dashes in them (and the make variables are assumed to only use -# underscores) the template takes two arguments - one with the regular -# subproject name and one with dashes replaced with underscores. -# -# Arguments: -# $(1) : real subproject name (ie with dashes) -# $(2) : normalized subproject name (ie dashes replaced with underscores) -# - -define subproject_template - -# In some (rare) cases, a subproject might not have any actual object -# files. It might only include header files or program sources. To keep -# things consistent we still want a library for this subproject, so in -# this spectial case we create a dummy source file and thus the build -# system will create a library for this subproject with just the -# corresponding dummy object file. - -ifeq ($$(strip $$($(2)_srcs) $$($(2)_c_srcs)),) -$(2)_srcs += _$(1).cc -$(2)_junk += _$(1).cc -endif - -_$(1).cc : - echo "int _$(2)( int arg ) { return arg; }" > $$@ - -# Build the object files for this subproject - -$(2)_objs := $$(patsubst %.cc, %.o, $$($(2)_srcs)) -$(2)_c_objs := $$(patsubst %.c, %.o, $$($(2)_c_srcs)) -$(2)_deps := $$(patsubst %.o, %.d, $$($(2)_objs)) -$(2)_c_deps := $$(patsubst %.o, %.d, $$($(2)_c_objs)) -$$($(2)_objs) : %.o : %.cc - $(COMPILE) -c $$< -$$($(2)_c_objs) : %.o : %.c - $(COMPILE_C) -c $$< - -$(2)_junk += $$($(2)_objs) $$($(2)_c_objs) $$($(2)_deps) $$($(2)_c_deps) - -# Build a library for this subproject - -lib$(1).a : $$($(2)_objs) $$($(2)_c_objs) - $(AR) rcv $$@ $$^ - $(RANLIB) $$@ - -$(2)_junk += lib$(1).a - -# Reverse the dependency list so that a given subproject only depends on -# subprojects listed to its right. This is the correct order for linking -# the list of subproject libraries. - -$(2)_reverse_deps := $$(call reverse_list,$$($(2)_subproject_deps)) - -# Build unit tests - -$(2)_test_objs := $$(patsubst %.cc, %.o, $$($(2)_test_srcs)) -$(2)_test_deps := $$(patsubst %.o, %.d, $$($(2)_test_objs)) -$(2)_test_exes := $$(patsubst %.t.cc, %-utst, $$($(2)_test_srcs)) -$(2)_test_outs := $$(patsubst %, %.out, $$($(2)_test_exes)) -$(2)_test_libs := $(1) $$($(2)_reverse_deps) utst -$(2)_test_libnames := $$(patsubst %, lib%.a, $$($(2)_test_libs)) -$(2)_test_libarg := -L. $$(patsubst %, -l%, $$($(2)_test_libs)) - -$$($(2)_test_objs) : %.o : %.cc - $(COMPILE) -c $$< - -$$($(2)_test_exes) : %-utst : %.t.o $$($(2)_test_libnames) - $(LINK) -o $$@ $$< $$($(2)_test_libarg) $(LIBS) - -$(2)_deps += $$($(2)_test_deps) -$(2)_junk += \ - $$($(2)_test_objs) $$($(2)_test_deps) \ - $$($(2)_test_exes) *.junk-dat - -# Run unit tests - -$$($(2)_test_outs) : %.out : % - $(RUN) $(RUNFLAGS) ./$$< default | tee $$@ - -$(2)_junk += $$($(2)_test_outs) - -# Build programs - -$(2)_prog_objs := $$(patsubst %.cc, %.o, $$($(2)_prog_srcs)) -$(2)_prog_deps := $$(patsubst %.o, %.d, $$($(2)_prog_objs)) -$(2)_prog_exes := $$(patsubst %.cc, %, $$($(2)_prog_srcs)) -$(2)_prog_libs := $(1) $$($(2)_reverse_deps) -$(2)_prog_libnames := $$(patsubst %, lib%.a, $$($(2)_prog_libs)) -$(2)_prog_libarg := -L. $$(patsubst %, -l%, $$($(2)_prog_libs)) - -$$($(2)_prog_objs) : %.o : %.cc - $(COMPILE) -c $$< - -$$($(2)_prog_exes) : % : %.o $$($(2)_prog_libnames) - $(LINK) -o $$@ $$< $$($(2)_prog_libarg) $(LIBS) - -$(2)_deps += $$($(2)_prog_deps) -$(2)_junk += $$($(2)_prog_objs) $$($(2)_prog_deps) $$($(2)_prog_exes) - -# Build programs which will be installed - -$(2)_install_prog_objs := $$(patsubst %.cc, %.o, $$($(2)_install_prog_srcs)) -$(2)_install_prog_deps := $$(patsubst %.o, %.d, $$($(2)_install_prog_objs)) -$(2)_install_prog_exes := $$(patsubst %.cc, %, $$($(2)_install_prog_srcs)) - -$$($(2)_install_prog_objs) : %.o : %.cc - $(COMPILE) -c $$< - -$$($(2)_install_prog_exes) : % : %.o $$($(2)_prog_libnames) - $(LINK) -o $$@ $$< $$($(2)_prog_libarg) $(LIBS) - -$(2)_deps += $$($(2)_install_prog_deps) -$(2)_junk += \ - $$($(2)_install_prog_objs) $$($(2)_install_prog_deps) \ - $$($(2)_install_prog_exes) - -# Subproject specific targets - -all-$(1) : lib$(1).a $$($(2)_install_prog_exes) - -check-$(1) : $$($(2)_test_outs) - echo; grep -h -e'Unit Tests' -e'FAILED' -e'Segementation' $$^; echo - -clean-$(1) : - rm -rf $$($(2)_junk) - -.PHONY : all-$(1) check-$(1) clean-$(1) - -# Update running variables - -libs += lib$(1).a -objs += $$($(2)_objs) -srcs += $$(addprefix $(src_dir)/$(1)/, $$($(2)_srcs)) -hdrs += $$(addprefix $(src_dir)/$(1)/, $$($(2)_hdrs)) -junk += $$($(2)_junk) -deps += $$($(2)_deps) - -test_outs += $$($(2)_test_outs) - -install_hdrs += $$(addprefix $(src_dir)/$(1)/, $$($(2)_hdrs)) -install_libs += lib$(1).a -install_exes += $$($(2)_install_prog_exes) - -endef - -# Iterate over the subprojects and call the template for each one - -$(foreach sproj,$(sprojs_enabled), \ - $(eval $(call subproject_template,$(sproj),$(subst -,_,$(sproj))))) - -#------------------------------------------------------------------------- -# Autodependency files -#------------------------------------------------------------------------- - --include $(deps) - -deps : $(deps) -.PHONY : deps - -#------------------------------------------------------------------------- -# Check -#------------------------------------------------------------------------- - -check : $(test_outs) - echo; grep -h -e'Unit Tests' -e'FAILED' -e'Segementation' $^; echo - -.PHONY : check - -#------------------------------------------------------------------------- -# Installation -#------------------------------------------------------------------------- - -install-hdrs : $(install_hdrs) - $(MKINSTALLDIRS) $(install_hdrs_dir) - for file in $(install_hdrs); \ - do \ - $(INSTALL_HDR) $$file $(install_hdrs_dir); \ - done - -install-libs : $(install_libs) - $(MKINSTALLDIRS) $(install_libs_dir) - for file in $(install_libs); \ - do \ - $(INSTALL_LIB) $$file $(install_libs_dir); \ - done - -install-exes : $(install_exes) - $(MKINSTALLDIRS) $(install_exes_dir) - for file in $(install_exes); \ - do \ - $(INSTALL_EXE) $$file $(install_exes_dir); \ - done - -install : install-hdrs install-libs install-exes -ifeq ($(enable_stow),yes) - $(MKINSTALLDIRS) $(stow_pkg_dir) - cd $(stow_pkg_dir) && \ - $(STOW) --delete $(project_name)-* && \ - $(STOW) $(project_name)-$(project_ver) -endif - -.PHONY : install install-hdrs install-libs install-exes - -#------------------------------------------------------------------------- -# Regenerate configure information -#------------------------------------------------------------------------- - -configure_prereq = \ - $(src_dir)/configure.ac \ - $(src_dir)/aclocal.m4 \ - $(join $(addprefix $(src_dir)/, $(sprojs_enabled)), \ - $(patsubst %, /%.ac, $(sprojs_enabled))) - -$(src_dir)/configure : $(configure_prereq) - cd $(src_dir) && autoconf && autoheader - -config.status : $(src_dir)/configure - ./config.status --recheck - -sprojs_mk_in = \ - $(join $(addprefix $(src_dir)/, $(sprojs_enabled)), \ - $(patsubst %, /%.mk.in, $(sprojs_enabled))) - -Makefile : $(src_dir)/Makefile.in $(sprojs_mk_in) config.status - ./config.status - -dist_junk += config.status config.h Makefile config.log - -#------------------------------------------------------------------------- -# Distribution -#------------------------------------------------------------------------- -# The distribution tarball is named project-ver.tar.gz and it includes -# both enabled and disabled subprojects. - -dist_files = \ - $(sprojs) \ - README \ - style-guide.txt \ - mcppbs-uguide.txt \ - scripts \ - configure.ac \ - aclocal.m4 \ - configure \ - config.h.in \ - Makefile.in \ - -dist_dir := $(project_name)-$(project_ver) -dist_tgz := $(project_name)-$(project_ver).tar.gz - -# Notice that when we make the distribution we rewrite the configure.ac -# script with the current version and we rerun autoconf in the new -# source directory so that the distribution will have the proper version -# information. We also rewrite the "Version : " line in the README. - -dist : - rm -rf $(dist_dir) - mkdir $(dist_dir) - tar -C $(src_dir) -cf - $(dist_files) | tar -C $(dist_dir) -xpf - - sed -i.bak 's/^\(# Version :\).*/\1 $(project_ver)/' $(dist_dir)/README - sed -i.bak 's/\( proj_version,\).*/\1 [$(project_ver)])/' $(dist_dir)/configure.ac - cd $(dist_dir) && \ - autoconf && autoheader && \ - rm -rf autom4te.cache configure.ac.bak README.bak - tar -czvf $(dist_tgz) $(dist_dir) - rm -rf $(dist_dir) - -# You can use the distcheck target to try untarring the distribution and -# then running configure, make, make check, and make distclean. A -# "directory is not empty" error means distclean is not removing -# everything. - -distcheck : dist - rm -rf $(dist_dir) - tar -xzvf $(dist_tgz) - mkdir -p $(dist_dir)/build - cd $(dist_dir)/build; ../configure; make; make check; make distclean - rm -rf $(dist_dir) - -junk += $(project_name)-*.tar.gz - -.PHONY : dist distcheck - -#------------------------------------------------------------------------- -# Default -#------------------------------------------------------------------------- - -all : $(install_hdrs) $(install_libs) $(install_exes) -.PHONY : all - -#------------------------------------------------------------------------- -# Makefile debugging -#------------------------------------------------------------------------- -# This handy rule will display the contents of any make variable by -# using the target debug-. So for example, make debug-junk will -# display the contents of the junk variable. - -debug-% : - @echo $* = $($*) - -#------------------------------------------------------------------------- -# Clean up junk -#------------------------------------------------------------------------- - -clean : - rm -rf *~ \#* $(junk) - -distclean : - rm -rf *~ \#* $(junk) $(dist_junk) - -.PHONY : clean distclean diff --git a/README b/README deleted file mode 100644 index 610fbe4..0000000 --- a/README +++ /dev/null @@ -1,37 +0,0 @@ -========================================================================== -Modular C++ Build System Template -========================================================================== -# Author : Christopher Batten -# Date : September 24, 2008 -# Version : (under version control) - -This is a template for the Modular C++ Build System. Please refer to the -following documentation for more information on the build system: - - - 'mcppbs-uguide.txt' : Modular C++ Build System User Guide - - 'utst/utst-uguide.txt' : Unit Testing Framework User Guide - - 'style-guide.txt' : C++ Coding Style Guide - -Developers should eventually replace this 'README' file with information -on their new project. It is recommended that the new 'README' file keep -pointers to the above documentation so that end-users can learn about -the build system. You may also want to keep the version information -around so that you know what version of the build system you are using. - --------------------------------------------------------------------------- -Template Instantiation --------------------------------------------------------------------------- - - - Update project metadata (name, maintainer, etc) in 'configure.ac' - - Run 'autoconf && autoheader' in project's root directory - - Add subprojects and update the list in 'configure.ac' - --------------------------------------------------------------------------- -Build Steps --------------------------------------------------------------------------- - - % mkdir build - % cd build - % ../configure - % make - diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index 15353f2..0000000 --- a/aclocal.m4 +++ /dev/null @@ -1,345 +0,0 @@ -#========================================================================= -# Local Autoconf Macros -#========================================================================= -# This file contains the macros for the Modular C++ Build System and -# additional autoconf macros which developers can use in their -# configure.ac scripts. Please read the documentation in -# 'mcppbs-doc.txt' for more details on how the Modular C++ Build System -# works. The documenation for each macro should include information -# about the author, date, and copyright. - -#------------------------------------------------------------------------- -# MCPPBS_PROG_INSTALL -#------------------------------------------------------------------------- -# This macro will add an --enable-stow command line option to the -# configure script. When enabled, this macro will first check to see if -# the stow program is available and if so it will set the $stow shell -# variable to the binary name and the $enable_stow shell variable to -# "yes". These variables can be used in a makefile to conditionally use -# stow for installation. -# -# This macro uses two environment variables to help setup default stow -# locations. The $STOW_PREFIX is used for stowing native built packages. -# The packages are staged in $STOW_PREFIX/pkgs and then symlinks are -# created from within $STOW_PREFIX into the pkgs subdirectory. If you -# only do native builds then this is all you need to set. If you don't -# set $STOW_PREFIX then the default is just the normal default prefix -# which is almost always /usr/local. -# -# For non-native builds we probably want to install the packages in a -# different location which includes the host architecture name as part -# of the prefix. For these kind of builds, we can specify the $STOW_ROOT -# environment variable and the effective prefix will be -# $STOW_ROOT/${host_alias} where ${host_alias} is specified on the -# configure command line with "--host". -# -# Here is an example setup: -# -# STOW_ROOT="$HOME/install" -# STOW_ARCH="i386-macosx10.4" -# STOW_PREFIX="${STOW_ROOT}/${STOW_ARCH}" -# - -AC_DEFUN([MCPPBS_PROG_INSTALL], -[ - - # Configure command line option - - AC_ARG_ENABLE(stow, - AS_HELP_STRING(--enable-stow,[Enable stow-based install]), - [enable_stow="yes"],[enable_stow="no"]) - - AC_SUBST([enable_stow]) - - # Environment variables - - AC_ARG_VAR([STOW_ROOT], [Root for non-native stow-based installs]) - AC_ARG_VAR([STOW_PREFIX], [Prefix for stow-based installs]) - - # Check for install script - - AC_PROG_INSTALL - - # Deterimine if native build and set prefix appropriately - - AS_IF([ test ${enable_stow} = "yes" ], - [ - AC_CHECK_PROGS([stow],[stow],[no]) - AS_IF([ test ${stow} = "no" ], - [ - AC_MSG_ERROR([Cannot use --enable-stow since stow is not available]) - ]) - - # Check if native or non-native build - - AS_IF([ test "${build}" = "${host}" ], - [ - - # build == host so this is a native build. Make sure --prefix not - # set and $STOW_PREFIX is set, then set prefix=$STOW_PREFIX. - - AS_IF([ test "${prefix}" = "NONE" && test -n "${STOW_PREFIX}" ], - [ - prefix="${STOW_PREFIX}" - AC_MSG_NOTICE([Using \$STOW_PREFIX from environment]) - AC_MSG_NOTICE([prefix=${prefix}]) - ]) - - ],[ - - # build != host so this is a non-native build. Make sure --prefix - # not set and $STOW_ROOT is set, then set - # prefix=$STOW_ROOT/${host_alias}. - - AS_IF([ test "${prefix}" = "NONE" && test -n "${STOW_ROOT}" ], - [ - prefix="${STOW_ROOT}/${host_alias}" - AC_MSG_NOTICE([Using \$STOW_ROOT from environment]) - AC_MSG_NOTICE([prefix=${prefix}]) - ]) - - ]) - - ]) - -]) - -#------------------------------------------------------------------------- -# MCPPBS_PROG_RUN -# ------------------------------------------------------------------------- -# If we are doing a non-native build then we look for an isa simulator -# to use for running tests. We set the RUN substitution variable to be -# empty for native builds or to the name of the isa simulator for -# non-native builds. Thus a makefile can run compiled programs -# regardless if we are doing a native or non-native build like this: -# -# $(RUN) $(RUNFLAGS) ./test-program -# - -AC_DEFUN([MCPPBS_PROG_RUN], -[ - AS_IF([ test "${build}" != "${host}" ], - [ - AC_CHECK_TOOLS([RUN],[isa-run run],[no]) - AS_IF([ test ${RUN} = "no" ], - [ - AC_MSG_ERROR([Cannot find simulator for target ${target_alias}]) - ]) - ],[ - RUN="" - ]) - AC_SUBST([RUN]) - AC_SUBST([RUNFLAGS]) -]) - -#------------------------------------------------------------------------- -# MCPPBS_SUBPROJECTS([ sproj1, sproj2, ... ]) -#------------------------------------------------------------------------- -# The developer should call this macro with a list of the subprojects -# which make up this project. One should order the list such that any -# given subproject only depends on subprojects listed before it. The -# subproject names can also include an * suffix which indicates that -# this is an optional subproject. Optional subprojects are only included -# as part of the project build if enabled on the configure command line -# with a --enable- flag. The user can also specify that all -# optional subprojects should be included in the build with the -# --enable-optional-subprojects flag. -# -# Subproject names can also include a ** suffix which indicates that it -# is an optional subproject, but there is a group with the same name. -# Thus the --enable- command line option will enable not just the -# subproject sproj but all of the subprojects which are in the group. -# There is no error checking to make sure that if you use the ** suffix -# you actually define a group so be careful. -# -# Both required and optional subprojects should have a 'subproject.ac' -# file. The script's filename should be the abbreivated subproject name -# (assuming the subproject name is sproj then we would use 'sproj.ac') -# The MCPPBS_SUBPROJECTS macro includes the 'subproject.ac' files for -# enabled subprojects. Whitespace and newlines are allowed within the -# list. -# -# Author : Christopher Batten -# Date : September 10, 2008 - -AC_DEFUN([MCPPBS_SUBPROJECTS], -[ - - # Add command line argument to enable all optional subprojects - - AC_ARG_ENABLE(optional-subprojects, - AS_HELP_STRING([--enable-optional-subprojects], - [Enable all optional subprojects])) - - # Loop through the subprojects given in the macro argument - - m4_foreach([MCPPBS_SPROJ],[$1], - [ - - # Determine if this is a required or an optional subproject - - m4_define([MCPPBS_IS_REQ], - m4_bmatch(MCPPBS_SPROJ,[\*+],[false],[true])) - - # Determine if there is a group with the same name - - m4_define([MCPPBS_IS_GROUP], - m4_bmatch(MCPPBS_SPROJ,[\*\*],[true],[false])) - - # Create variations of the subproject name suitable for use as a CPP - # enabled define, a shell enabled variable, and a shell function - - m4_define([MCPPBS_SPROJ_NORM], - m4_normalize(m4_bpatsubsts(MCPPBS_SPROJ,[*],[]))) - - m4_define([MCPPBS_SPROJ_DEFINE], - m4_toupper(m4_bpatsubst(MCPPBS_SPROJ_NORM[]_ENABLED,[-],[_]))) - - m4_define([MCPPBS_SPROJ_FUNC], - m4_bpatsubst(_mpbp_[]MCPPBS_SPROJ_NORM[]_configure,[-],[_])) - - m4_define([MCPPBS_SPROJ_UNDERSCORES], - m4_bpatsubsts(MCPPBS_SPROJ,[-],[_])) - - m4_define([MCPPBS_SPROJ_SHVAR], - m4_bpatsubst(enable_[]MCPPBS_SPROJ_NORM[]_sproj,[-],[_])) - - # Add subproject to our running list - - subprojects="$subprojects MCPPBS_SPROJ_NORM" - - # Process the subproject appropriately. If enabled add it to the - # $enabled_subprojects running shell variable, set a - # SUBPROJECT_ENABLED C define, and include the appropriate - # 'subproject.ac'. - - m4_if(MCPPBS_IS_REQ,[true], - [ - AC_MSG_NOTICE([configuring default subproject : MCPPBS_SPROJ_NORM]) - AC_CONFIG_FILES(MCPPBS_SPROJ_NORM[].mk:MCPPBS_SPROJ_NORM[]/MCPPBS_SPROJ_NORM[].mk.in) - MCPPBS_SPROJ_SHVAR="yes" - subprojects_enabled="$subprojects_enabled MCPPBS_SPROJ_NORM" - AC_DEFINE(MCPPBS_SPROJ_DEFINE,, - [Define if subproject MCPPBS_SPROJ_NORM is enabled]) - m4_include(MCPPBS_SPROJ_NORM[]/MCPPBS_SPROJ_NORM[].ac) - ],[ - - # For optional subprojects we capture the 'subproject.ac' as a - # shell function so that in the MCPPBS_GROUP macro we can just - # call this shell function instead of reading in 'subproject.ac' - # again. - - MCPPBS_SPROJ_FUNC () - { - AC_MSG_NOTICE([configuring optional subproject : MCPPBS_SPROJ_NORM]) - AC_CONFIG_FILES(MCPPBS_SPROJ_NORM[].mk:MCPPBS_SPROJ_NORM[]/MCPPBS_SPROJ_NORM[].mk.in) - MCPPBS_SPROJ_SHVAR="yes" - subprojects_enabled="$subprojects_enabled MCPPBS_SPROJ_NORM" - AC_DEFINE(MCPPBS_SPROJ_DEFINE,, - [Define if subproject MCPPBS_SPROJ_NORM is enabled]) - m4_include(MCPPBS_SPROJ_NORM[]/MCPPBS_SPROJ_NORM[].ac) - }; - - # Optional subprojects add --enable-subproject command line - # options, _if_ the subproject name is not also a group name. - - m4_if(MCPPBS_IS_GROUP,[false], - [ - AC_ARG_ENABLE(MCPPBS_SPROJ_NORM, - AS_HELP_STRING(--enable-MCPPBS_SPROJ_NORM, - [Subproject MCPPBS_SPROJ_NORM]), - [MCPPBS_SPROJ_SHVAR="yes"],[MCPPBS_SPROJ_SHVAR="no"]) - - AS_IF([test "$MCPPBS_SPROJ_SHVAR" = "yes"], - [ - eval "MCPPBS_SPROJ_FUNC" - ],[ - AC_MSG_NOTICE([processing optional subproject : MCPPBS_SPROJ_NORM]) - ]) - - ],[ - - # If the subproject name is also a group name then we need to - # make sure that we set the shell variable for that subproject to - # no so that the group code knows we haven't run it yet. - - AC_MSG_NOTICE([processing optional subproject : MCPPBS_SPROJ_NORM]) - MCPPBS_SPROJ_SHVAR="no" - - ]) - - # Always execute the subproject configure code if we are enabling - # all subprojects. - - AS_IF([ test "$enable_optional_subprojects" = "yes" \ - && test "$MCPPBS_SPROJ_SHVAR" = "no" ], - [ - eval "MCPPBS_SPROJ_FUNC" - ]) - - ]) - - ]) - - # Output make variables - - AC_SUBST([subprojects]) - AC_SUBST([subprojects_enabled]) - -]) - -#------------------------------------------------------------------------- -# MCPPBS_GROUP( [group-name], [ sproj1, sproj2, ... ] ) -#------------------------------------------------------------------------- -# This macro creates a subproject group with the given group-name. When -# a user specifies --enable- the listed subprojects will be -# enabled. Groups can have the same name as a subproject and in that -# case whenever a user specifies --enable- the subprojects -# listed in the corresponding group will also be enabled. Groups are -# useful for specifying related subprojects which are usually enabled -# together, as well as for specifying that a specific optional -# subproject has dependencies on other optional subprojects. -# -# Author : Christopher Batten -# Date : September 10, 2008 - -AC_DEFUN([MCPPBS_GROUP], -[ - - m4_define([MCPPBS_GROUP_NORM], - m4_normalize([$1])) - - m4_define([MCPPBS_GROUP_SHVAR], - m4_bpatsubst(enable_[]MCPPBS_GROUP_NORM[]_group,[-],[_])) - - AC_ARG_ENABLE(MCPPBS_GROUP_NORM, - AS_HELP_STRING(--enable-MCPPBS_GROUP_NORM, - [Group MCPPBS_GROUP_NORM: $2]), - [MCPPBS_GROUP_SHVAR="yes"],[MCPPBS_GROUP_SHVAR="no"]) - - AS_IF([test "$MCPPBS_GROUP_SHVAR" = "yes" ], - [ - AC_MSG_NOTICE([configuring optional group : MCPPBS_GROUP_NORM]) - ]) - - m4_foreach([MCPPBS_SPROJ],[$2], - [ - - m4_define([MCPPBS_SPROJ_NORM], - m4_normalize(MCPPBS_SPROJ)) - - m4_define([MCPPBS_SPROJ_SHVAR], - m4_bpatsubst(enable_[]MCPPBS_SPROJ_NORM[]_sproj,[-],[_])) - - m4_define([MCPPBS_SPROJ_FUNC], - m4_bpatsubst(_mpbp_[]MCPPBS_SPROJ_NORM[]_configure,[-],[_])) - - AS_IF([ test "$MCPPBS_GROUP_SHVAR" = "yes" \ - && test "$MCPPBS_SPROJ_SHVAR" = "no" ], - [ - eval "MCPPBS_SPROJ_FUNC" - ]) - - ]) - -]) diff --git a/config.h.in b/config.h.in deleted file mode 100644 index cf21aff..0000000 --- a/config.h.in +++ /dev/null @@ -1,49 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define if subproject MCPPBS_SPROJ_NORM is enabled */ -#undef RISCV_ENABLED - -/* Define if 64-bit mode is supported */ -#undef RISCV_ENABLE_64BIT - -/* Define if floating-point instructions are supported */ -#undef RISCV_ENABLE_FPU - -/* Define if instruction cache simulator is enabled */ -#undef RISCV_ENABLE_ICSIM - -/* Define if instruction compression is supported */ -#undef RISCV_ENABLE_RVC - -/* Define if vector processor is supported */ -#undef RISCV_ENABLE_VEC - -/* Define if libopcodes exists */ -#undef RISCV_HAVE_LIBOPCODES - -/* Define if subproject MCPPBS_SPROJ_NORM is enabled */ -#undef SOFTFLOAT_ENABLED - -/* Define if subproject MCPPBS_SPROJ_NORM is enabled */ -#undef SOFTFLOAT_RISCV_ENABLED - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS diff --git a/configure b/configure deleted file mode 100755 index cca7f14..0000000 --- a/configure +++ /dev/null @@ -1,5576 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.64 for RISC-V ISA Simulator ?. -# -# Report bugs to . -# -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software -# Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and Andrew Waterman -$0: about your system, including any error possibly output -$0: before this message. Then install a modern shell, or -$0: manually run the script under such a shell if you do -$0: have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error ERROR [LINENO LOG_FD] -# --------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with status $?, using 1 if that was 0. -as_fn_error () -{ - as_status=$?; test $as_status -eq 0 && as_status=1 - if test "$3"; then - as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 - fi - $as_echo "$as_me: error: $1" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='RISC-V ISA Simulator' -PACKAGE_TARNAME='riscv-sim-isa' -PACKAGE_VERSION='?' -PACKAGE_STRING='RISC-V ISA Simulator ?' -PACKAGE_BUGREPORT='Andrew Waterman' -PACKAGE_URL='' - -ac_unique_file="riscv/common.h" -ac_subst_vars='LTLIBOBJS -LIBOBJS -subprojects_enabled -subprojects -EGREP -GREP -CPP -RUNFLAGS -ac_ct_RUN -RUN -stow -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -STOW_PREFIX -STOW_ROOT -enable_stow -RANLIB -AR -ac_ct_CXX -CXXFLAGS -CXX -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_stow -enable_optional_subprojects -enable_fpu -enable_64bit -enable_rvc -enable_vec -enable_icsim -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CXX -CXXFLAGS -CCC -STOW_ROOT -STOW_PREFIX -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information." - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures RISC-V ISA Simulator ? to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/riscv-sim-isa] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of RISC-V ISA Simulator ?:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-stow Enable stow-based install - --enable-optional-subprojects - Enable all optional subprojects - --disable-fpu Disable floating-point - --disable-64bit Disable 64-bit mode - --enable-rvc Enable instruction compression - --disable-vec Disable vector processor - --enable-icsim Enable instruction cache simulator - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CXX C++ compiler command - CXXFLAGS C++ compiler flags - STOW_ROOT Root for non-native stow-based installs - STOW_PREFIX Prefix for stow-based installs - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -RISC-V ISA Simulator configure ? -generated by GNU Autoconf 2.64 - -Copyright (C) 2009 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - return $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_cxx_try_compile LINENO -# ---------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_cxx_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - return $ac_retval - -} # ac_fn_cxx_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - return $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - return $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - return $ac_retval - -} # ac_fn_c_try_link -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by RISC-V ISA Simulator $as_me ?, which was -generated by GNU Autoconf 2.64. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## -## File substitutions. ## -## ------------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - ac_site_file1=$CONFIG_SITE -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -ac_aux_dir= -for ac_dir in scripts "$srcdir"/scripts; do - for ac_t in install-sh install.sh shtool; do - if test -f "$ac_dir/$ac_t"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/$ac_t -c" - break 2 - fi - done -done -if test -z "$ac_aux_dir"; then - as_fn_error "cannot find install-sh, install.sh, or shtool in scripts \"$srcdir\"/scripts" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - - -#------------------------------------------------------------------------- -# Checks for programs -#------------------------------------------------------------------------- - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "no acceptable C compiler found in \$PATH -See \`config.log' for more details." "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - rm -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -if test -z "$ac_file"; then : - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ as_fn_set_status 77 -as_fn_error "C compiler cannot create executables -See \`config.log' for more details." "$LINENO" 5; }; } -fi -ac_exeext=$ac_cv_exeext - -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out -ac_clean_files=$ac_clean_files_save -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." "$LINENO" 5; } -fi -rm -f conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if test "${ac_cv_objext+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot compute suffix of object files: cannot compile -See \`config.log' for more details." "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -z "$CXX"; then - if test -n "$CCC"; then - CXX=$CCC - else - if test -n "$ac_tool_prefix"; then - for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CXX+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5 -$as_echo "$CXX" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CXX" && break - done -fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CXX="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5 -$as_echo "$ac_ct_CXX" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CXX" && break -done - - if test "x$ac_ct_CXX" = x; then - CXX="g++" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CXX=$ac_ct_CXX - fi -fi - - fi -fi -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - rm -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5 -$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5 -$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GXX=yes -else - GXX= -fi -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5 -$as_echo_n "checking whether $CXX accepts -g... " >&6; } -if test "${ac_cv_prog_cxx_g+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_save_cxx_werror_flag=$ac_cxx_werror_flag - ac_cxx_werror_flag=yes - ac_cv_prog_cxx_g=no - CXXFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_cv_prog_cxx_g=yes -else - CXXFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - -else - ac_cxx_werror_flag=$ac_save_cxx_werror_flag - CXXFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_cxx_try_compile "$LINENO"; then : - ac_cv_prog_cxx_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cxx_werror_flag=$ac_save_cxx_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5 -$as_echo "$ac_cv_prog_cxx_g" >&6; } -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_AR" = x; then - AR="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -else - AR="$ac_cv_prog_AR" -fi - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_RANLIB+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - - -#------------------------------------------------------------------------- -# MCPPBS specific program checks -#------------------------------------------------------------------------- -# These macros check to see if we can do a stow-based install and also -# check for an isa simulator suitable for running the unit test programs -# via the makefile. - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - - - # Configure command line option - - # Check whether --enable-stow was given. -if test "${enable_stow+set}" = set; then : - enableval=$enable_stow; enable_stow="yes" -else - enable_stow="no" -fi - - - - - # Environment variables - - - - - # Check for install script - - - - # Deterimine if native build and set prefix appropriately - - if test ${enable_stow} = "yes" ; then : - - for ac_prog in stow -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_stow+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$stow"; then - ac_cv_prog_stow="$stow" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_stow="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -stow=$ac_cv_prog_stow -if test -n "$stow"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $stow" >&5 -$as_echo "$stow" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$stow" && break -done -test -n "$stow" || stow="no" - - if test ${stow} = "no" ; then : - - as_fn_error "Cannot use --enable-stow since stow is not available" "$LINENO" 5 - -fi - - # Check if native or non-native build - - if test "${build}" = "${host}" ; then : - - - # build == host so this is a native build. Make sure --prefix not - # set and $STOW_PREFIX is set, then set prefix=$STOW_PREFIX. - - if test "${prefix}" = "NONE" && test -n "${STOW_PREFIX}" ; then : - - prefix="${STOW_PREFIX}" - { $as_echo "$as_me:${as_lineno-$LINENO}: Using \$STOW_PREFIX from environment" >&5 -$as_echo "$as_me: Using \$STOW_PREFIX from environment" >&6;} - { $as_echo "$as_me:${as_lineno-$LINENO}: prefix=${prefix}" >&5 -$as_echo "$as_me: prefix=${prefix}" >&6;} - -fi - - -else - - - # build != host so this is a non-native build. Make sure --prefix - # not set and $STOW_ROOT is set, then set - # prefix=$STOW_ROOT/${host_alias}. - - if test "${prefix}" = "NONE" && test -n "${STOW_ROOT}" ; then : - - prefix="${STOW_ROOT}/${host_alias}" - { $as_echo "$as_me:${as_lineno-$LINENO}: Using \$STOW_ROOT from environment" >&5 -$as_echo "$as_me: Using \$STOW_ROOT from environment" >&6;} - { $as_echo "$as_me:${as_lineno-$LINENO}: prefix=${prefix}" >&5 -$as_echo "$as_me: prefix=${prefix}" >&6;} - -fi - - -fi - - -fi - - - - if test "${build}" != "${host}" ; then : - - if test -n "$ac_tool_prefix"; then - for ac_prog in isa-run run - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_RUN+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RUN"; then - ac_cv_prog_RUN="$RUN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RUN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RUN=$ac_cv_prog_RUN -if test -n "$RUN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RUN" >&5 -$as_echo "$RUN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$RUN" && break - done -fi -if test -z "$RUN"; then - ac_ct_RUN=$RUN - for ac_prog in isa-run run -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_RUN+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RUN"; then - ac_cv_prog_ac_ct_RUN="$ac_ct_RUN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RUN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RUN=$ac_cv_prog_ac_ct_RUN -if test -n "$ac_ct_RUN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RUN" >&5 -$as_echo "$ac_ct_RUN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_RUN" && break -done - - if test "x$ac_ct_RUN" = x; then - RUN="no" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RUN=$ac_ct_RUN - fi -fi - - if test ${RUN} = "no" ; then : - - as_fn_error "Cannot find simulator for target ${target_alias}" "$LINENO" 5 - -fi - -else - - RUN="" - -fi - - - - -#------------------------------------------------------------------------- -# Checks for header files -#------------------------------------------------------------------------- - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if test "${ac_cv_path_GREP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - - -#------------------------------------------------------------------------- -# Default compiler flags -#------------------------------------------------------------------------- - -CFLAGS="-Wall -O2" - -CXXFLAGS="-Wall -O2 -Wno-pmf-conversions" - - -#------------------------------------------------------------------------- -# MCPPBS subproject list -#------------------------------------------------------------------------- -# Order list so that subprojects only depend on those listed earlier. -# The '*' suffix indicates an optional subproject. The '**' suffix -# indicates an optional subproject which is also the name of a group. - - - - # Add command line argument to enable all optional subprojects - - # Check whether --enable-optional-subprojects was given. -if test "${enable_optional_subprojects+set}" = set; then : - enableval=$enable_optional_subprojects; -fi - - - # Loop through the subprojects given in the macro argument - - - - # Determine if this is a required or an optional subproject - - - - # Determine if there is a group with the same name - - - - # Create variations of the subproject name suitable for use as a CPP - # enabled define, a shell enabled variable, and a shell function - - - - - - - - - - - - # Add subproject to our running list - - subprojects="$subprojects riscv" - - # Process the subproject appropriately. If enabled add it to the - # $enabled_subprojects running shell variable, set a - # SUBPROJECT_ENABLED C define, and include the appropriate - # 'subproject.ac'. - - - { $as_echo "$as_me:${as_lineno-$LINENO}: configuring default subproject : riscv" >&5 -$as_echo "$as_me: configuring default subproject : riscv" >&6;} - ac_config_files="$ac_config_files riscv.mk:riscv/riscv.mk.in" - - enable_riscv_sproj="yes" - subprojects_enabled="$subprojects_enabled riscv" - -$as_echo "#define RISCV_ENABLED /**/" >>confdefs.h - - # Check whether --enable-fpu was given. -if test "${enable_fpu+set}" = set; then : - enableval=$enable_fpu; -fi - -if test "x$enable_fpu" != "xno"; then : - - -$as_echo "#define RISCV_ENABLE_FPU /**/" >>confdefs.h - - -fi - -# Check whether --enable-64bit was given. -if test "${enable_64bit+set}" = set; then : - enableval=$enable_64bit; -fi - -if test "x$enable_64bit" != "xno"; then : - - -$as_echo "#define RISCV_ENABLE_64BIT /**/" >>confdefs.h - - -fi - -# Check whether --enable-rvc was given. -if test "${enable_rvc+set}" = set; then : - enableval=$enable_rvc; -fi - -if test "x$enable_rvc" = "xyes"; then : - - -$as_echo "#define RISCV_ENABLE_RVC /**/" >>confdefs.h - - -fi - -# Check whether --enable-vec was given. -if test "${enable_vec+set}" = set; then : - enableval=$enable_vec; -fi - -if test "x$enable_vec" != "xno"; then : - - -$as_echo "#define RISCV_ENABLE_VEC /**/" >>confdefs.h - - -fi - -# Check whether --enable-icsim was given. -if test "${enable_icsim+set}" = set; then : - enableval=$enable_icsim; -fi - -if test "x$enable_icsim" = "xyes"; then : - - -$as_echo "#define RISCV_ENABLE_ICSIM /**/" >>confdefs.h - - -fi - -libopc=`dirname \`which riscv-gcc\``/../`$ac_config_guess`/riscv/lib/libopcodes.a -as_ac_File=`$as_echo "ac_cv_file_$libopc" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $libopc" >&5 -$as_echo_n "checking for $libopc... " >&6; } -if { as_var=$as_ac_File; eval "test \"\${$as_var+set}\" = set"; }; then : - $as_echo_n "(cached) " >&6 -else - test "$cross_compiling" = yes && - as_fn_error "cannot check for file existence when cross compiling" "$LINENO" 5 -if test -r "$libopc"; then - eval "$as_ac_File=yes" -else - eval "$as_ac_File=no" -fi -fi -eval ac_res=\$$as_ac_File - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -eval as_val=\$$as_ac_File - if test "x$as_val" = x""yes; then : - -cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$libopc" | $as_tr_cpp` 1 -_ACEOF -have_libopcodes="yes" -else - have_libopcodes="no" -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing bfd_init" >&5 -$as_echo_n "checking for library containing bfd_init... " >&6; } -if test "${ac_cv_search_bfd_init+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char bfd_init (); -int -main () -{ -return bfd_init (); - ; - return 0; -} -_ACEOF -for ac_lib in '' bfd; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_bfd_init=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if test "${ac_cv_search_bfd_init+set}" = set; then : - break -fi -done -if test "${ac_cv_search_bfd_init+set}" = set; then : - -else - ac_cv_search_bfd_init=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_bfd_init" >&5 -$as_echo "$ac_cv_search_bfd_init" >&6; } -ac_res=$ac_cv_search_bfd_init -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -else - have_libopcodes="no" -fi - - -if test "$have_libopcodes" = "no"; then : - - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Could not find opcodes library" >&5 -$as_echo "$as_me: WARNING: Could not find opcodes library" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Build will not include disassembly support" >&5 -$as_echo "$as_me: WARNING: Build will not include disassembly support" >&2;} - -else - - LIBS="$libopc $LIBS" - -$as_echo "#define RISCV_HAVE_LIBOPCODES /**/" >>confdefs.h - - -fi - - - - - - # Determine if this is a required or an optional subproject - - - - # Determine if there is a group with the same name - - - - # Create variations of the subproject name suitable for use as a CPP - # enabled define, a shell enabled variable, and a shell function - - - - - - - - - - - - # Add subproject to our running list - - subprojects="$subprojects softfloat" - - # Process the subproject appropriately. If enabled add it to the - # $enabled_subprojects running shell variable, set a - # SUBPROJECT_ENABLED C define, and include the appropriate - # 'subproject.ac'. - - - { $as_echo "$as_me:${as_lineno-$LINENO}: configuring default subproject : softfloat" >&5 -$as_echo "$as_me: configuring default subproject : softfloat" >&6;} - ac_config_files="$ac_config_files softfloat.mk:softfloat/softfloat.mk.in" - - enable_softfloat_sproj="yes" - subprojects_enabled="$subprojects_enabled softfloat" - -$as_echo "#define SOFTFLOAT_ENABLED /**/" >>confdefs.h - - - - - - - # Determine if this is a required or an optional subproject - - - - # Determine if there is a group with the same name - - - - # Create variations of the subproject name suitable for use as a CPP - # enabled define, a shell enabled variable, and a shell function - - - - - - - - - - - - # Add subproject to our running list - - subprojects="$subprojects softfloat_riscv" - - # Process the subproject appropriately. If enabled add it to the - # $enabled_subprojects running shell variable, set a - # SUBPROJECT_ENABLED C define, and include the appropriate - # 'subproject.ac'. - - - { $as_echo "$as_me:${as_lineno-$LINENO}: configuring default subproject : softfloat_riscv" >&5 -$as_echo "$as_me: configuring default subproject : softfloat_riscv" >&6;} - ac_config_files="$ac_config_files softfloat_riscv.mk:softfloat_riscv/softfloat_riscv.mk.in" - - enable_softfloat_riscv_sproj="yes" - subprojects_enabled="$subprojects_enabled softfloat_riscv" - -$as_echo "#define SOFTFLOAT_RISCV_ENABLED /**/" >>confdefs.h - - - - - - - # Output make variables - - - - - - -#------------------------------------------------------------------------- -# MCPPBS subproject groups -#------------------------------------------------------------------------- -# If a group has the same name as a subproject then you must add the -# '**' suffix in the subproject list above. The list of subprojects in a -# group should be ordered so that subprojets only depend on those listed -# earlier. Here is an example: -# -# MCPPBS_GROUP( [group-name], [sproja,sprojb,...] ) -# - -#------------------------------------------------------------------------- -# Output -#------------------------------------------------------------------------- - -ac_config_headers="$ac_config_headers config.h" - -ac_config_files="$ac_config_files Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - -: ${CONFIG_STATUS=./config.status} -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error ERROR [LINENO LOG_FD] -# --------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with status $?, using 1 if that was 0. -as_fn_error () -{ - as_status=$?; test $as_status -eq 0 && as_status=1 - if test "$3"; then - as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 - fi - $as_echo "$as_me: error: $1" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by RISC-V ISA Simulator $as_me ?, which was -generated by GNU Autoconf 2.64. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_version="\\ -RISC-V ISA Simulator config.status ? -configured by $0, generated by GNU Autoconf 2.64, - with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" - -Copyright (C) 2009 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "riscv.mk") CONFIG_FILES="$CONFIG_FILES riscv.mk:riscv/riscv.mk.in" ;; - "softfloat.mk") CONFIG_FILES="$CONFIG_FILES softfloat.mk:softfloat/softfloat.mk.in" ;; - "softfloat_riscv.mk") CONFIG_FILES="$CONFIG_FILES softfloat_riscv.mk:softfloat_riscv/softfloat_riscv.mk.in" ;; - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - - *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= - trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\).*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\).*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || as_fn_error "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ -s/:*$// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_t=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_t"; then - break - elif $ac_last_try; then - as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS " -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} - - rm -f "$tmp/stdin" - case $ac_file in - -) cat "$tmp/out" && rm -f "$tmp/out";; - *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; - esac \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" - } >"$tmp/config.h" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$tmp/config.h" "$ac_file" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error "could not create -" "$LINENO" 5 - fi - ;; - - - esac - -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit $? -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/configure.ac b/configure.ac deleted file mode 100644 index 90fe28e..0000000 --- a/configure.ac +++ /dev/null @@ -1,103 +0,0 @@ -#========================================================================= -# Toplevel configure.ac for the Modular C++ Build System -#========================================================================= -# Please read the documenation in 'mcppbs-doc.txt' for more details on -# how the Modular C++ Build System works. For most new projects, a -# developer will only need to make the following changes: -# -# - change the project metadata listed right below -# - update the list of subprojects via the 'MCPPBS_SUBPROJECTS' macro -# - possibly add subproject groups if needed to ease configuration -# - add more configure checks for platform specific configuration -# - -#------------------------------------------------------------------------- -# Project metadata -#------------------------------------------------------------------------- - -m4_define( proj_name, [RISC-V ISA Simulator]) -m4_define( proj_maintainer, [Andrew Waterman]) -m4_define( proj_abbreviation, [riscv-sim-isa]) - -#------------------------------------------------------------------------- -# Project version information -#------------------------------------------------------------------------- -# Version information is meant to be managed through a version control -# system's tags and revision numbers. In a working copy the version will -# not be defined here (you should just use the version control system's -# mechanisms). When we make a distribution then we can set the version -# here as formed by the scripts/vcs-version.sh script so that the -# distribution knows what version it came from. If you are not using -# version control then it is fine to set this directly. - -m4_define( proj_version, [?]) - -#------------------------------------------------------------------------- -# Setup -#------------------------------------------------------------------------- - -AC_INIT(proj_name,proj_version,proj_maintainer,proj_abbreviation) -AC_CONFIG_SRCDIR([riscv/common.h]) -AC_CONFIG_AUX_DIR([scripts]) -AC_CANONICAL_BUILD -AC_CANONICAL_HOST - -#------------------------------------------------------------------------- -# Checks for programs -#------------------------------------------------------------------------- - -AC_PROG_CC -AC_PROG_CXX -AC_CHECK_TOOL([AR],[ar]) -AC_CHECK_TOOL([RANLIB],[ranlib]) - -#------------------------------------------------------------------------- -# MCPPBS specific program checks -#------------------------------------------------------------------------- -# These macros check to see if we can do a stow-based install and also -# check for an isa simulator suitable for running the unit test programs -# via the makefile. - -MCPPBS_PROG_INSTALL -MCPPBS_PROG_RUN - -#------------------------------------------------------------------------- -# Checks for header files -#------------------------------------------------------------------------- - -AC_HEADER_STDC - -#------------------------------------------------------------------------- -# Default compiler flags -#------------------------------------------------------------------------- - -AC_SUBST([CFLAGS], ["-Wall -O2"]) -AC_SUBST([CXXFLAGS],["-Wall -O2 -Wno-pmf-conversions"]) - -#------------------------------------------------------------------------- -# MCPPBS subproject list -#------------------------------------------------------------------------- -# Order list so that subprojects only depend on those listed earlier. -# The '*' suffix indicates an optional subproject. The '**' suffix -# indicates an optional subproject which is also the name of a group. - -MCPPBS_SUBPROJECTS([ riscv, softfloat, softfloat_riscv ]) - -#------------------------------------------------------------------------- -# MCPPBS subproject groups -#------------------------------------------------------------------------- -# If a group has the same name as a subproject then you must add the -# '**' suffix in the subproject list above. The list of subprojects in a -# group should be ordered so that subprojets only depend on those listed -# earlier. Here is an example: -# -# MCPPBS_GROUP( [group-name], [sproja,sprojb,...] ) -# - -#------------------------------------------------------------------------- -# Output -#------------------------------------------------------------------------- - -AC_CONFIG_HEADERS([config.h]) -AC_CONFIG_FILES([Makefile]) -AC_OUTPUT diff --git a/riscv/applink.cc b/riscv/applink.cc deleted file mode 100644 index e3e979d..0000000 --- a/riscv/applink.cc +++ /dev/null @@ -1,154 +0,0 @@ -#include "applink.h" -#include "common.h" -#include "sim.h" -#include -#include - -enum -{ - APP_CMD_READ_MEM, - APP_CMD_WRITE_MEM, - APP_CMD_READ_CONTROL_REG, - APP_CMD_WRITE_CONTROL_REG, - APP_CMD_START, - APP_CMD_STOP, - APP_CMD_ACK, - APP_CMD_NACK -}; - -#define APP_DATA_ALIGN 8 -#define APP_MAX_DATA_SIZE 1024 -struct packet -{ - uint16_t cmd; - uint16_t seqno; - uint32_t data_size; - uint64_t addr; - uint8_t data[APP_MAX_DATA_SIZE]; -}; - -class packet_error : public std::runtime_error -{ -public: - packet_error(const std::string& s) : std::runtime_error(s) {} -}; -class io_error : public packet_error -{ -public: - io_error(const std::string& s) : packet_error(s) {} -}; - -appserver_link_t::appserver_link_t(int _tohost_fd, int _fromhost_fd) - : sim(NULL), tohost_fd(_tohost_fd), fromhost_fd(_fromhost_fd), seqno(1) -{ -} - -void appserver_link_t::init(sim_t* _sim) -{ - sim = _sim; -} - -void appserver_link_t::wait_for_start() -{ - while(wait_for_packet() != APP_CMD_START); -} - -void appserver_link_t::wait_for_tohost() -{ - while(wait_for_packet() != APP_CMD_READ_CONTROL_REG); -} - -void appserver_link_t::wait_for_fromhost() -{ - while(wait_for_packet() != APP_CMD_WRITE_CONTROL_REG); -} - -void appserver_link_t::send_packet(packet* p) -{ - while(1) try - { - int bytes = write(tohost_fd,p,offsetof(packet,data)+p->data_size); - if(bytes == -1 || (size_t)bytes != offsetof(packet,data)+p->data_size) - throw io_error("write failed"); - return; - } - catch(io_error e) - { - fprintf(stderr,"warning: %s\n",e.what()); - } -} - -void appserver_link_t::nack(uint16_t nack_seqno) -{ - packet p = {APP_CMD_NACK,nack_seqno,0,0}; - send_packet(&p); -} - -int appserver_link_t::wait_for_packet() -{ - while(1) try - { - packet p; - int bytes = read(fromhost_fd,&p,sizeof(p)); - if(bytes < (signed)offsetof(packet,data)) - throw io_error("read failed"); - - if(p.seqno != seqno) - { - nack(p.seqno); - continue; - } - - packet ackpacket = {APP_CMD_ACK,seqno,0,0}; - - switch(p.cmd) - { - case APP_CMD_START: - break; - case APP_CMD_STOP: - send_packet(&ackpacket); - throw quit_sim(); - case APP_CMD_READ_MEM: - demand(p.addr % APP_DATA_ALIGN == 0, "misaligned address"); - demand(p.data_size % APP_DATA_ALIGN == 0, "misaligned data"); - demand(p.data_size <= APP_MAX_DATA_SIZE, "long read data"); - demand(p.addr <= sim->memsz && p.addr+p.data_size <= sim->memsz, "out of bounds: 0x%llx",(unsigned long long)p.addr); - ackpacket.data_size = p.data_size; - - static_assert(APP_DATA_ALIGN >= sizeof(uint64_t)) - for(size_t i = 0; i < p.data_size/8; i++) - ((uint64_t*)ackpacket.data)[i] = sim->mmu->load_uint64(p.addr+i*8); - break; - case APP_CMD_WRITE_MEM: - demand(p.addr % APP_DATA_ALIGN == 0, "misaligned address"); - demand(p.data_size % APP_DATA_ALIGN == 0, "misaligned data"); - demand(p.data_size <= bytes - offsetof(packet,data), "short packet"); - demand(p.addr <= sim->memsz && p.addr+p.data_size <= sim->memsz, "out of bounds: 0x%llx",(unsigned long long)p.addr); - - for(size_t i = 0; i < p.data_size/8; i++) - sim->mmu->store_uint64(p.addr+i*8, ((uint64_t*)p.data)[i]); - break; - case APP_CMD_READ_CONTROL_REG: - demand(p.addr == 16,"bad control reg"); - demand(p.data_size == sizeof(reg_t),"bad control reg size"); - ackpacket.data_size = sizeof(reg_t); - memcpy(ackpacket.data,&sim->tohost,sizeof(reg_t)); - break; - case APP_CMD_WRITE_CONTROL_REG: - demand(p.addr == 17,"bad control reg"); - demand(p.data_size == sizeof(reg_t),"bad control reg size"); - sim->tohost = 0; - memcpy(&sim->fromhost,p.data,sizeof(reg_t)); - break; - } - - send_packet(&ackpacket); - seqno++; - return p.cmd; - } - catch(io_error e) - { - fprintf(stderr,"warning: %s\n",e.what()); - } -} - diff --git a/riscv/applink.h b/riscv/applink.h deleted file mode 100644 index 5ef0a1a..0000000 --- a/riscv/applink.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef _APPLINK_H -#define _APPLINK_H - -#include - -class sim_t; -struct packet; -class appserver_link_t -{ -public: - appserver_link_t(int _tohost_fd, int _fromhost_fd); - void init(sim_t* _sim); - void wait_for_start(); - void wait_for_tohost(); - void wait_for_fromhost(); - int wait_for_packet(); - -private: - sim_t* sim; - int tohost_fd; - int fromhost_fd; - uint16_t seqno; - - void nack(uint16_t seqno); - void send_packet(packet* p); -}; - -#endif diff --git a/riscv/common.h b/riscv/common.h deleted file mode 100644 index 7dd6570..0000000 --- a/riscv/common.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef _RISCV_COMMON_H -#define _RISCV_COMMON_H - -#include -#include -#include - -#ifdef __cplusplus -# include -# define print_and_die(s) throw std::runtime_error(s) -#else -# define print_and_die(s) do { fprintf(stderr,"%s\n",s); abort(); } while(0) -#endif - -#define demand(cond,str,...) \ - do { if(!(cond)) { \ - char __str[256]; \ - snprintf(__str,256,"in %s, line %d: " str, \ - __FILE__,__LINE__,##__VA_ARGS__); \ - print_and_die(__str); \ - } } while(0) - -#define static_assert(x) switch (x) case 0: case (x): - -#define likely(x) __builtin_expect(x, 1) -#define unlikely(x) __builtin_expect(x, 0) - -#endif diff --git a/riscv/decode.h b/riscv/decode.h deleted file mode 100644 index 2078e58..0000000 --- a/riscv/decode.h +++ /dev/null @@ -1,301 +0,0 @@ -#ifndef _RISCV_DECODE_H -#define _RISCV_DECODE_H - -#define __STDC_LIMIT_MACROS -#include - -#include "config.h" - -typedef int int128_t __attribute__((mode(TI))); -typedef unsigned int uint128_t __attribute__((mode(TI))); - -typedef int64_t sreg_t; -typedef uint64_t reg_t; -typedef uint64_t freg_t; - -const int OPCODE_BITS = 7; - -const int XPRID_BITS = 5; -const int NXPR = 1 << XPRID_BITS; - -const int FPR_BITS = 64; -const int FPRID_BITS = 5; -const int NFPR = 1 << FPRID_BITS; - -const int IMM_BITS = 12; -const int IMMLO_BITS = 7; -const int TARGET_BITS = 25; -const int FUNCT_BITS = 3; -const int FUNCTR_BITS = 7; -const int FFUNCT_BITS = 2; -const int RM_BITS = 3; -const int BIGIMM_BITS = 20; -const int BRANCH_ALIGN_BITS = 1; -const int JUMP_ALIGN_BITS = 1; - -#define SR_ET 0x0000000000000001ULL -#define SR_EF 0x0000000000000002ULL -#define SR_EV 0x0000000000000004ULL -#define SR_EC 0x0000000000000008ULL -#define SR_PS 0x0000000000000010ULL -#define SR_S 0x0000000000000020ULL -#define SR_UX 0x0000000000000040ULL -#define SR_SX 0x0000000000000080ULL -#define SR_IM 0x000000000000FF00ULL -#define SR_VM 0x0000000000010000ULL -#define SR_ZERO ~(SR_ET|SR_EF|SR_EV|SR_EC|SR_PS|SR_S|SR_UX|SR_SX|SR_IM|SR_VM) -#define SR_IM_SHIFT 8 -#define IPI_IRQ 5 -#define TIMER_IRQ 7 - -#define CAUSE_EXCCODE 0x000000FF -#define CAUSE_IP 0x0000FF00 -#define CAUSE_EXCCODE_SHIFT 0 -#define CAUSE_IP_SHIFT 8 - -#define FP_RD_NE 0 -#define FP_RD_0 1 -#define FP_RD_DN 2 -#define FP_RD_UP 3 -#define FP_RD_NMM 4 - -#define FSR_RD_SHIFT 5 -#define FSR_RD (0x7 << FSR_RD_SHIFT) - -#define FPEXC_NX 0x01 -#define FPEXC_UF 0x02 -#define FPEXC_OF 0x04 -#define FPEXC_DZ 0x08 -#define FPEXC_NV 0x10 - -#define FSR_AEXC_SHIFT 0 -#define FSR_NVA (FPEXC_NV << FSR_AEXC_SHIFT) -#define FSR_OFA (FPEXC_OF << FSR_AEXC_SHIFT) -#define FSR_UFA (FPEXC_UF << FSR_AEXC_SHIFT) -#define FSR_DZA (FPEXC_DZ << FSR_AEXC_SHIFT) -#define FSR_NXA (FPEXC_NX << FSR_AEXC_SHIFT) -#define FSR_AEXC (FSR_NVA | FSR_OFA | FSR_UFA | FSR_DZA | FSR_NXA) - -#define FSR_ZERO ~(FSR_RD | FSR_AEXC) - -// note: bit fields are in little-endian order -struct itype_t -{ - unsigned opcode : OPCODE_BITS; - unsigned funct : FUNCT_BITS; - signed imm12 : IMM_BITS; - unsigned rs1 : XPRID_BITS; - unsigned rd : XPRID_BITS; -}; - -struct btype_t -{ - unsigned opcode : OPCODE_BITS; - unsigned funct : FUNCT_BITS; - unsigned immlo : IMMLO_BITS; - unsigned rs2 : XPRID_BITS; - unsigned rs1 : XPRID_BITS; - signed immhi : IMM_BITS-IMMLO_BITS; -}; - -struct jtype_t -{ - unsigned jump_opcode : OPCODE_BITS; - signed target : TARGET_BITS; -}; - -struct rtype_t -{ - unsigned opcode : OPCODE_BITS; - unsigned funct : FUNCT_BITS; - unsigned functr : FUNCTR_BITS; - unsigned rs2 : XPRID_BITS; - unsigned rs1 : XPRID_BITS; - unsigned rd : XPRID_BITS; -}; - -struct ltype_t -{ - unsigned opcode : OPCODE_BITS; - unsigned bigimm : BIGIMM_BITS; - unsigned rd : XPRID_BITS; -}; - -struct ftype_t -{ - unsigned opcode : OPCODE_BITS; - unsigned ffunct : FFUNCT_BITS; - unsigned rm : RM_BITS; - unsigned rs3 : FPRID_BITS; - unsigned rs2 : FPRID_BITS; - unsigned rs1 : FPRID_BITS; - unsigned rd : FPRID_BITS; -}; - -union insn_t -{ - itype_t itype; - jtype_t jtype; - rtype_t rtype; - btype_t btype; - ltype_t ltype; - ftype_t ftype; - uint32_t bits; -}; - -#include -class do_writeback -{ -public: - do_writeback(reg_t* _rf, int _rd) : rf(_rf), rd(_rd) {} - - const do_writeback& operator = (reg_t rhs) - { -#if 0 - printf("R[%x] <= %llx\n",rd,(long long)rhs); -#endif - rf[rd] = rhs; - rf[0] = 0; - return *this; - } - - operator reg_t() { return rf[rd]; } - -private: - reg_t* rf; - int rd; -}; - -#define throw_illegal_instruction \ - ({ if (utmode) throw trap_vector_illegal_instruction; \ - else throw trap_illegal_instruction; }) - -// helpful macros, etc -#define RS1 XPR[insn.rtype.rs1] -#define RS2 XPR[insn.rtype.rs2] -#define RD do_writeback(XPR,insn.rtype.rd) -#define RA do_writeback(XPR,1) -#define FRS1 FPR[insn.ftype.rs1] -#define FRS2 FPR[insn.ftype.rs2] -#define FRS3 FPR[insn.ftype.rs3] -#define FRD FPR[insn.ftype.rd] -#define BIGIMM insn.ltype.bigimm -#define SIMM insn.itype.imm12 -#define BIMM ((signed)insn.btype.immlo | (insn.btype.immhi << IMMLO_BITS)) -#define SHAMT (insn.itype.imm12 & 0x3F) -#define SHAMTW (insn.itype.imm12 & 0x1F) -#define TARGET insn.jtype.target -#define BRANCH_TARGET (pc + (BIMM << BRANCH_ALIGN_BITS)) -#define JUMP_TARGET (pc + (TARGET << JUMP_ALIGN_BITS)) -#define RM ({ int rm = insn.ftype.rm; \ - if(rm == 7) rm = (fsr & FSR_RD) >> FSR_RD_SHIFT; \ - if(rm > 4) throw_illegal_instruction; \ - rm; }) - -#define require_supervisor if(unlikely(!(sr & SR_S))) throw trap_privileged_instruction -#define xpr64 (xprlen == 64) -#define require_xpr64 if(unlikely(!xpr64)) throw_illegal_instruction -#define require_xpr32 if(unlikely(xpr64)) throw_illegal_instruction -#define require_fp if(unlikely(!(sr & SR_EF))) throw trap_fp_disabled -#define require_vector \ - ({ if(!(sr & SR_EV)) throw trap_vector_disabled; \ - else if (!utmode && (vecbanks_count < 3)) throw trap_vector_bank; \ - }) -#define cmp_trunc(reg) (reg_t(reg) << (64-xprlen)) -#define set_fp_exceptions ({ set_fsr(fsr | \ - (softfloat_exceptionFlags << FSR_AEXC_SHIFT)); \ - softfloat_exceptionFlags = 0; }) - -#define sext32(x) ((sreg_t)(int32_t)(x)) -#define zext32(x) ((reg_t)(uint32_t)(x)) -#define sext_xprlen(x) ((sreg_t(x) << (64-xprlen)) >> (64-xprlen)) -#define zext_xprlen(x) ((reg_t(x) << (64-xprlen)) >> (64-xprlen)) - -#ifndef RISCV_ENABLE_RVC -# define set_pc(x) \ - do { if((x) & (sizeof(insn_t)-1)) \ - { badvaddr = (x); throw trap_instruction_address_misaligned; } \ - npc = (x); \ - } while(0) -#else -# define set_pc(x) \ - do { if((x) & ((sr & SR_EC) ? 1 : 3)) \ - { badvaddr = (x); throw trap_instruction_address_misaligned; } \ - npc = (x); \ - } while(0) -#endif - -// RVC stuff - -#define INSN_IS_RVC(x) (((x) & 0x3) < 0x3) -#define insn_length(x) (INSN_IS_RVC(x) ? 2 : 4) -#define require_rvc if(!(sr & SR_EC)) throw_illegal_instruction - -#define CRD_REGNUM ((insn.bits >> 5) & 0x1f) -#define CRD do_writeback(XPR, CRD_REGNUM) -#define CRS1 XPR[(insn.bits >> 10) & 0x1f] -#define CRS2 XPR[(insn.bits >> 5) & 0x1f] -#define CIMM6 ((int32_t)((insn.bits >> 10) & 0x3f) << 26 >> 26) -#define CIMM5U ((insn.bits >> 5) & 0x1f) -#define CIMM5 ((int32_t)CIMM5U << 27 >> 27) -#define CIMM10 ((int32_t)((insn.bits >> 5) & 0x3ff) << 22 >> 22) -#define CBRANCH_TARGET (pc + (CIMM5 << BRANCH_ALIGN_BITS)) -#define CJUMP_TARGET (pc + (CIMM10 << JUMP_ALIGN_BITS)) - -static const int rvc_rs1_regmap[8] = { 20, 21, 2, 3, 4, 5, 6, 7 }; -#define rvc_rd_regmap rvc_rs1_regmap -#define rvc_rs2b_regmap rvc_rs1_regmap -static const int rvc_rs2_regmap[8] = { 20, 21, 2, 3, 4, 5, 6, 0 }; -#define CRDS XPR[rvc_rd_regmap[(insn.bits >> 13) & 0x7]] -#define FCRDS FPR[rvc_rd_regmap[(insn.bits >> 13) & 0x7]] -#define CRS1S XPR[rvc_rs1_regmap[(insn.bits >> 10) & 0x7]] -#define CRS2S XPR[rvc_rs2_regmap[(insn.bits >> 13) & 0x7]] -#define CRS2BS XPR[rvc_rs2b_regmap[(insn.bits >> 5) & 0x7]] -#define FCRS2S FPR[rvc_rs2_regmap[(insn.bits >> 13) & 0x7]] - -// vector stuff -#define VL vl - -#define UT_RS1(idx) uts[idx]->XPR[insn.rtype.rs1] -#define UT_RS2(idx) uts[idx]->XPR[insn.rtype.rs2] -#define UT_RD(idx) do_writeback(uts[idx]->XPR,insn.rtype.rd) -#define UT_RA(idx) do_writeback(uts[idx]->XPR,1) -#define UT_FRS1(idx) uts[idx]->FPR[insn.ftype.rs1] -#define UT_FRS2(idx) uts[idx]->FPR[insn.ftype.rs2] -#define UT_FRS3(idx) uts[idx]->FPR[insn.ftype.rs3] -#define UT_FRD(idx) uts[idx]->FPR[insn.ftype.rd] -#define UT_RM(idx) ((insn.ftype.rm != 7) ? insn.ftype.rm : \ - ((uts[idx]->fsr & FSR_RD) >> FSR_RD_SHIFT)) - -#define UT_LOOP_START for (int i=0;i -#include -#include - -icsim_t::icsim_t(size_t _sets, size_t _ways, size_t _linesz, const char* _name) - : sets(_sets), ways(_ways), linesz(_linesz), idx_mask(_sets-1), name(_name) -{ - if(sets == 0 || (sets & (sets-1))) - throw std::logic_error("sets not a power of 2"); - if(linesz == 0 || (linesz & (linesz-1))) - throw std::logic_error("linesz not a power of 2"); - - idx_shift = 0; - while(_linesz >>= 1) - idx_shift++; - - tags = new uint64_t[sets*ways]; - memset(tags, 0, sets*ways*sizeof(uint64_t)); - - read_accesses = 0; - read_misses = 0; - bytes_read = 0; - write_accesses = 0; - write_misses = 0; - bytes_written = 0; - writebacks = 0; -} - -icsim_t::icsim_t(const icsim_t& rhs) - : sets(rhs.sets), ways(rhs.ways), linesz(rhs.linesz), - idx_shift(rhs.idx_shift), idx_mask(rhs.idx_mask), name(rhs.name) -{ - tags = new uint64_t[sets*ways]; - memcpy(tags, rhs.tags, sets*ways*sizeof(uint64_t)); -} - -icsim_t::~icsim_t() -{ - delete [] tags; -} - -void icsim_t::print_stats() -{ - if(read_accesses + write_accesses == 0) - return; - - float mr = 100.0f*(read_misses+write_misses)/(read_accesses+write_accesses); - - std::cout << std::setprecision(3) << std::fixed; - std::cout << name << " "; - std::cout << "Bytes Read: " << bytes_read << std::endl; - std::cout << name << " "; - std::cout << "Bytes Written: " << bytes_written << std::endl; - std::cout << name << " "; - std::cout << "Read Accesses: " << read_accesses << std::endl; - std::cout << name << " "; - std::cout << "Write Accesses: " << write_accesses << std::endl; - std::cout << name << " "; - std::cout << "Read Misses: " << read_misses << std::endl; - std::cout << name << " "; - std::cout << "Write Misses: " << write_misses << std::endl; - std::cout << name << " "; - std::cout << "Writebacks: " << writebacks << std::endl; - std::cout << name << " "; - std::cout << "Miss Rate: " << mr << '%' << std::endl; - - float cr = read_accesses == 0 ? 0.0f : 100.0f*bytes_read/(4*read_accesses); - if(name == "I$") - { - std::cout << name << " "; - std::cout << "RVC compression ratio: " << cr << '%' << std::endl; - } -} - -void icsim_t::tick(uint64_t pc, int insnlen, bool store) -{ - store ? write_accesses++ : read_accesses++; - (store ? bytes_written : bytes_read) += insnlen; - - size_t idx = (pc >> idx_shift) & idx_mask; - size_t tag = (pc >> idx_shift) | VALID; - - for(size_t i = 0; i < ways; i++) - { - if(tag == (tags[idx + i*sets] & ~DIRTY)) // hit - { - if(store) - tags[idx + i*sets] |= DIRTY; - return; - } - } - - store ? write_misses++ : read_misses++; - - size_t way = lfsr.next() % ways; - if((tags[idx + way*sets] & (VALID | DIRTY)) == (VALID | DIRTY)) - writebacks++; - tags[idx + way*sets] = tag; -} diff --git a/riscv/icsim.h b/riscv/icsim.h deleted file mode 100644 index 48931f5..0000000 --- a/riscv/icsim.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef _RISCV_ICSIM_H -#define _RISCV_ICSIM_H - -#include -#include -#include - -class lfsr_t -{ -public: - lfsr_t() : reg(1) {} - lfsr_t(const lfsr_t& lfsr) : reg(lfsr.reg) {} - uint32_t next() { return reg = (reg>>1)^(-(reg&1) & 0xd0000001); } -private: - uint32_t reg; -}; - -class icsim_t -{ -public: - icsim_t(size_t sets, size_t ways, size_t linesz, const char* name); - icsim_t(const icsim_t& rhs); - ~icsim_t(); - - void tick(uint64_t pc, int insnlen, bool store); - void print_stats(); -private: - lfsr_t lfsr; - - size_t sets; - size_t ways; - size_t linesz; - size_t idx_shift; - size_t idx_mask; - - uint64_t* tags; - - uint64_t read_accesses; - uint64_t read_misses; - uint64_t bytes_read; - uint64_t write_accesses; - uint64_t write_misses; - uint64_t bytes_written; - uint64_t writebacks; - - std::string name; - - static const uint64_t VALID = 1ULL << 63; - static const uint64_t DIRTY = 1ULL << 62; -}; - -#endif diff --git a/riscv/insn_footer.h b/riscv/insn_footer.h deleted file mode 100644 index 0d53966..0000000 --- a/riscv/insn_footer.h +++ /dev/null @@ -1,2 +0,0 @@ - return npc; -} diff --git a/riscv/insn_header.h b/riscv/insn_header.h deleted file mode 100644 index 9496572..0000000 --- a/riscv/insn_header.h +++ /dev/null @@ -1,7 +0,0 @@ -#include "processor.h" -#include "common.h" -#include "config.h" -#include "sim.h" -#include "softfloat.h" -#include "platform.h" // softfloat isNaNF32UI, etc. -#include "internals.h" // ditto diff --git a/riscv/insns/add.h b/riscv/insns/add.h deleted file mode 100644 index 34d49ff..0000000 --- a/riscv/insns/add.h +++ /dev/null @@ -1 +0,0 @@ -RD = sext_xprlen(RS1 + RS2); diff --git a/riscv/insns/addi.h b/riscv/insns/addi.h deleted file mode 100644 index 88881e5..0000000 --- a/riscv/insns/addi.h +++ /dev/null @@ -1 +0,0 @@ -RD = sext_xprlen(RS1 + SIMM); diff --git a/riscv/insns/addiw.h b/riscv/insns/addiw.h deleted file mode 100644 index 23ae278..0000000 --- a/riscv/insns/addiw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = sext32(SIMM + RS1); diff --git a/riscv/insns/addw.h b/riscv/insns/addw.h deleted file mode 100644 index 4e2ed56..0000000 --- a/riscv/insns/addw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = sext32(RS1 + RS2); diff --git a/riscv/insns/amoadd_d.h b/riscv/insns/amoadd_d.h deleted file mode 100644 index b8450bf..0000000 --- a/riscv/insns/amoadd_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_xpr64; -reg_t v = mmu.load_uint64(RS1); -mmu.store_uint64(RS1, RS2 + v); -RD = v; diff --git a/riscv/insns/amoadd_w.h b/riscv/insns/amoadd_w.h deleted file mode 100644 index 033b3c8..0000000 --- a/riscv/insns/amoadd_w.h +++ /dev/null @@ -1,3 +0,0 @@ -reg_t v = mmu.load_int32(RS1); -mmu.store_uint32(RS1, RS2 + v); -RD = v; diff --git a/riscv/insns/amoand_d.h b/riscv/insns/amoand_d.h deleted file mode 100644 index 586eb7f..0000000 --- a/riscv/insns/amoand_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_xpr64; -reg_t v = mmu.load_uint64(RS1); -mmu.store_uint64(RS1, RS2 & v); -RD = v; diff --git a/riscv/insns/amoand_w.h b/riscv/insns/amoand_w.h deleted file mode 100644 index 18a9249..0000000 --- a/riscv/insns/amoand_w.h +++ /dev/null @@ -1,3 +0,0 @@ -reg_t v = mmu.load_int32(RS1); -mmu.store_uint32(RS1, RS2 & v); -RD = v; diff --git a/riscv/insns/amomax_d.h b/riscv/insns/amomax_d.h deleted file mode 100644 index 1a0bc8a..0000000 --- a/riscv/insns/amomax_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_xpr64; -sreg_t v = mmu.load_int64(RS1); -mmu.store_uint64(RS1, std::max(sreg_t(RS2),v)); -RD = v; diff --git a/riscv/insns/amomax_w.h b/riscv/insns/amomax_w.h deleted file mode 100644 index ff9c2da..0000000 --- a/riscv/insns/amomax_w.h +++ /dev/null @@ -1,3 +0,0 @@ -int32_t v = mmu.load_int32(RS1); -mmu.store_uint32(RS1, std::max(int32_t(RS2),v)); -RD = v; diff --git a/riscv/insns/amomaxu_d.h b/riscv/insns/amomaxu_d.h deleted file mode 100644 index ccfaf1d..0000000 --- a/riscv/insns/amomaxu_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_xpr64; -reg_t v = mmu.load_uint64(RS1); -mmu.store_uint64(RS1, std::max(RS2,v)); -RD = v; diff --git a/riscv/insns/amomaxu_w.h b/riscv/insns/amomaxu_w.h deleted file mode 100644 index 075847d..0000000 --- a/riscv/insns/amomaxu_w.h +++ /dev/null @@ -1,3 +0,0 @@ -uint32_t v = mmu.load_int32(RS1); -mmu.store_uint32(RS1, std::max(uint32_t(RS2),v)); -RD = (int32_t)v; diff --git a/riscv/insns/amomin_d.h b/riscv/insns/amomin_d.h deleted file mode 100644 index 4f3b6d6..0000000 --- a/riscv/insns/amomin_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_xpr64; -sreg_t v = mmu.load_int64(RS1); -mmu.store_uint64(RS1, std::min(sreg_t(RS2),v)); -RD = v; diff --git a/riscv/insns/amomin_w.h b/riscv/insns/amomin_w.h deleted file mode 100644 index 529ad50..0000000 --- a/riscv/insns/amomin_w.h +++ /dev/null @@ -1,3 +0,0 @@ -int32_t v = mmu.load_int32(RS1); -mmu.store_uint32(RS1, std::min(int32_t(RS2),v)); -RD = v; diff --git a/riscv/insns/amominu_d.h b/riscv/insns/amominu_d.h deleted file mode 100644 index c09c51a..0000000 --- a/riscv/insns/amominu_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_xpr64; -reg_t v = mmu.load_uint64(RS1); -mmu.store_uint64(RS1, std::min(RS2,v)); -RD = v; diff --git a/riscv/insns/amominu_w.h b/riscv/insns/amominu_w.h deleted file mode 100644 index d8d6377..0000000 --- a/riscv/insns/amominu_w.h +++ /dev/null @@ -1,3 +0,0 @@ -uint32_t v = mmu.load_int32(RS1); -mmu.store_uint32(RS1, std::min(uint32_t(RS2),v)); -RD = (int32_t)v; diff --git a/riscv/insns/amoor_d.h b/riscv/insns/amoor_d.h deleted file mode 100644 index 76a4508..0000000 --- a/riscv/insns/amoor_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_xpr64; -reg_t v = mmu.load_uint64(RS1); -mmu.store_uint64(RS1, RS2 | v); -RD = v; diff --git a/riscv/insns/amoor_w.h b/riscv/insns/amoor_w.h deleted file mode 100644 index 741fbef..0000000 --- a/riscv/insns/amoor_w.h +++ /dev/null @@ -1,3 +0,0 @@ -reg_t v = mmu.load_int32(RS1); -mmu.store_uint32(RS1, RS2 | v); -RD = v; diff --git a/riscv/insns/amoswap_d.h b/riscv/insns/amoswap_d.h deleted file mode 100644 index 43e3538..0000000 --- a/riscv/insns/amoswap_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_xpr64; -reg_t v = mmu.load_uint64(RS1); -mmu.store_uint64(RS1, RS2); -RD = v; diff --git a/riscv/insns/amoswap_w.h b/riscv/insns/amoswap_w.h deleted file mode 100644 index 30e6102..0000000 --- a/riscv/insns/amoswap_w.h +++ /dev/null @@ -1,3 +0,0 @@ -reg_t v = mmu.load_int32(RS1); -mmu.store_uint32(RS1, RS2); -RD = v; diff --git a/riscv/insns/and.h b/riscv/insns/and.h deleted file mode 100644 index 88ac1d8..0000000 --- a/riscv/insns/and.h +++ /dev/null @@ -1 +0,0 @@ -RD = RS1 & RS2; diff --git a/riscv/insns/andi.h b/riscv/insns/andi.h deleted file mode 100644 index 5caea16..0000000 --- a/riscv/insns/andi.h +++ /dev/null @@ -1 +0,0 @@ -RD = SIMM & RS1; diff --git a/riscv/insns/beq.h b/riscv/insns/beq.h deleted file mode 100644 index 7b26488..0000000 --- a/riscv/insns/beq.h +++ /dev/null @@ -1,2 +0,0 @@ -if(cmp_trunc(RS1) == cmp_trunc(RS2)) - set_pc(BRANCH_TARGET); diff --git a/riscv/insns/bge.h b/riscv/insns/bge.h deleted file mode 100644 index dca544b..0000000 --- a/riscv/insns/bge.h +++ /dev/null @@ -1,2 +0,0 @@ -if(sreg_t(cmp_trunc(RS1)) >= sreg_t(cmp_trunc(RS2))) - set_pc(BRANCH_TARGET); diff --git a/riscv/insns/bgeu.h b/riscv/insns/bgeu.h deleted file mode 100644 index 6325466..0000000 --- a/riscv/insns/bgeu.h +++ /dev/null @@ -1,2 +0,0 @@ -if(cmp_trunc(RS1) >= cmp_trunc(RS2)) - set_pc(BRANCH_TARGET); diff --git a/riscv/insns/blt.h b/riscv/insns/blt.h deleted file mode 100644 index d84fd7a..0000000 --- a/riscv/insns/blt.h +++ /dev/null @@ -1,2 +0,0 @@ -if(sreg_t(cmp_trunc(RS1)) < sreg_t(cmp_trunc(RS2))) - set_pc(BRANCH_TARGET); diff --git a/riscv/insns/bltu.h b/riscv/insns/bltu.h deleted file mode 100644 index 250fd4f..0000000 --- a/riscv/insns/bltu.h +++ /dev/null @@ -1,2 +0,0 @@ -if(cmp_trunc(RS1) < cmp_trunc(RS2)) - set_pc(BRANCH_TARGET); diff --git a/riscv/insns/bne.h b/riscv/insns/bne.h deleted file mode 100644 index f775721..0000000 --- a/riscv/insns/bne.h +++ /dev/null @@ -1,2 +0,0 @@ -if(cmp_trunc(RS1) != cmp_trunc(RS2)) - set_pc(BRANCH_TARGET); diff --git a/riscv/insns/break.h b/riscv/insns/break.h deleted file mode 100644 index 7fd3d66..0000000 --- a/riscv/insns/break.h +++ /dev/null @@ -1 +0,0 @@ -throw trap_breakpoint; diff --git a/riscv/insns/c_add.h b/riscv/insns/c_add.h deleted file mode 100644 index 2170d69..0000000 --- a/riscv/insns/c_add.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRD = CRS1 + CRS2; diff --git a/riscv/insns/c_add3.h b/riscv/insns/c_add3.h deleted file mode 100644 index 914c85d..0000000 --- a/riscv/insns/c_add3.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRDS = CRS1S + CRS2BS; diff --git a/riscv/insns/c_addi.h b/riscv/insns/c_addi.h deleted file mode 100644 index 448e31a..0000000 --- a/riscv/insns/c_addi.h +++ /dev/null @@ -1,10 +0,0 @@ -require_rvc; -if(CRD_REGNUM == 0) -{ - reg_t temp = CRS1; - if(CIMM6 & 0x20) - RA = npc; - set_pc(temp); -} -else - CRD = sext_xprlen(CRS2 + CIMM6); diff --git a/riscv/insns/c_addiw.h b/riscv/insns/c_addiw.h deleted file mode 100644 index 6a1e0a3..0000000 --- a/riscv/insns/c_addiw.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_xpr64; -CRD = sext32(CRS2 + CIMM6); diff --git a/riscv/insns/c_and3.h b/riscv/insns/c_and3.h deleted file mode 100644 index b506d6a..0000000 --- a/riscv/insns/c_and3.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRDS = CRS1S & CRS2BS; diff --git a/riscv/insns/c_beq.h b/riscv/insns/c_beq.h deleted file mode 100644 index 031d96d..0000000 --- a/riscv/insns/c_beq.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -if(cmp_trunc(CRS1S) == cmp_trunc(CRS2S)) - set_pc(CBRANCH_TARGET); diff --git a/riscv/insns/c_bne.h b/riscv/insns/c_bne.h deleted file mode 100644 index caf9229..0000000 --- a/riscv/insns/c_bne.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -if(cmp_trunc(CRS1S) != cmp_trunc(CRS2S)) - set_pc(CBRANCH_TARGET); diff --git a/riscv/insns/c_fld.h b/riscv/insns/c_fld.h deleted file mode 100644 index a726039..0000000 --- a/riscv/insns/c_fld.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_fp; -FCRDS = mmu.load_int64(CRS1S+CIMM5*8); diff --git a/riscv/insns/c_flw.h b/riscv/insns/c_flw.h deleted file mode 100644 index cdb7221..0000000 --- a/riscv/insns/c_flw.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_fp; -FCRDS = mmu.load_int32(CRS1S+CIMM5*4); diff --git a/riscv/insns/c_fsd.h b/riscv/insns/c_fsd.h deleted file mode 100644 index 20814fd..0000000 --- a/riscv/insns/c_fsd.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_fp; -mmu.store_uint64(CRS1S+CIMM5*8, FCRS2S); diff --git a/riscv/insns/c_fsw.h b/riscv/insns/c_fsw.h deleted file mode 100644 index 1d21629..0000000 --- a/riscv/insns/c_fsw.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_fp; -mmu.store_uint32(CRS1S+CIMM5*4, FCRS2S); diff --git a/riscv/insns/c_j.h b/riscv/insns/c_j.h deleted file mode 100644 index 5ba9c73..0000000 --- a/riscv/insns/c_j.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -set_pc(CJUMP_TARGET); diff --git a/riscv/insns/c_ld.h b/riscv/insns/c_ld.h deleted file mode 100644 index f9c07af..0000000 --- a/riscv/insns/c_ld.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_xpr64; -CRDS = mmu.load_int64(CRS1S+CIMM5*8); diff --git a/riscv/insns/c_ld0.h b/riscv/insns/c_ld0.h deleted file mode 100644 index f51a966..0000000 --- a/riscv/insns/c_ld0.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_xpr64; -CRD = mmu.load_int64(CRS1); diff --git a/riscv/insns/c_ldsp.h b/riscv/insns/c_ldsp.h deleted file mode 100644 index 1fbd9bd..0000000 --- a/riscv/insns/c_ldsp.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_xpr64; -CRD = mmu.load_int64(XPR[30]+CIMM6*8); diff --git a/riscv/insns/c_li.h b/riscv/insns/c_li.h deleted file mode 100644 index e65614e..0000000 --- a/riscv/insns/c_li.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRD = CIMM6; diff --git a/riscv/insns/c_lw.h b/riscv/insns/c_lw.h deleted file mode 100644 index 4796ab8..0000000 --- a/riscv/insns/c_lw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRDS = mmu.load_int32(CRS1S+CIMM5*4); diff --git a/riscv/insns/c_lw0.h b/riscv/insns/c_lw0.h deleted file mode 100644 index d263a80..0000000 --- a/riscv/insns/c_lw0.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRD = mmu.load_int32(CRS1); diff --git a/riscv/insns/c_lwsp.h b/riscv/insns/c_lwsp.h deleted file mode 100644 index 318342a..0000000 --- a/riscv/insns/c_lwsp.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRD = mmu.load_int32(XPR[30]+CIMM6*4); diff --git a/riscv/insns/c_move.h b/riscv/insns/c_move.h deleted file mode 100644 index b0aef33..0000000 --- a/riscv/insns/c_move.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRD = CRS1; diff --git a/riscv/insns/c_or3.h b/riscv/insns/c_or3.h deleted file mode 100644 index 143e2ae..0000000 --- a/riscv/insns/c_or3.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRDS = CRS1S | CRS2BS; diff --git a/riscv/insns/c_sd.h b/riscv/insns/c_sd.h deleted file mode 100644 index b2eb456..0000000 --- a/riscv/insns/c_sd.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_xpr64; -mmu.store_uint64(CRS1S+CIMM5*8, CRS2S); diff --git a/riscv/insns/c_sdsp.h b/riscv/insns/c_sdsp.h deleted file mode 100644 index ca97d51..0000000 --- a/riscv/insns/c_sdsp.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_xpr64; -mmu.store_uint64(XPR[30]+CIMM6*8, CRS2); diff --git a/riscv/insns/c_slli.h b/riscv/insns/c_slli.h deleted file mode 100644 index 5026767..0000000 --- a/riscv/insns/c_slli.h +++ /dev/null @@ -1,5 +0,0 @@ -require_rvc; -if(xpr64) - CRDS = CRDS << CIMM5U; -else - CRDS = sext32(CRDS << CIMM5U); diff --git a/riscv/insns/c_slli32.h b/riscv/insns/c_slli32.h deleted file mode 100644 index 1e3e958..0000000 --- a/riscv/insns/c_slli32.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_xpr64; -CRDS = CRDS << (32+CIMM5U); diff --git a/riscv/insns/c_slliw.h b/riscv/insns/c_slliw.h deleted file mode 100644 index 9e428f5..0000000 --- a/riscv/insns/c_slliw.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_xpr64; -CRDS = sext32(CRDS << CIMM5U); diff --git a/riscv/insns/c_srai.h b/riscv/insns/c_srai.h deleted file mode 100644 index aa33424..0000000 --- a/riscv/insns/c_srai.h +++ /dev/null @@ -1,5 +0,0 @@ -require_rvc; -if(xpr64) - CRDS = sreg_t(CRDS) >> CIMM5U; -else - CRDS = sext32(int32_t(CRDS) >> CIMM5U); diff --git a/riscv/insns/c_srai32.h b/riscv/insns/c_srai32.h deleted file mode 100644 index ca7b024..0000000 --- a/riscv/insns/c_srai32.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_xpr64; -CRDS = sreg_t(CRDS) >> (32+CIMM5U); diff --git a/riscv/insns/c_srli.h b/riscv/insns/c_srli.h deleted file mode 100644 index 56e0681..0000000 --- a/riscv/insns/c_srli.h +++ /dev/null @@ -1,5 +0,0 @@ -require_rvc; -if(xpr64) - CRDS = CRDS >> CIMM5U; -else - CRDS = sext32(uint32_t(CRDS) >> CIMM5U); diff --git a/riscv/insns/c_srli32.h b/riscv/insns/c_srli32.h deleted file mode 100644 index 4f5b8ea..0000000 --- a/riscv/insns/c_srli32.h +++ /dev/null @@ -1,3 +0,0 @@ -require_rvc; -require_xpr64; -CRDS = CRDS >> (32+CIMM5U); diff --git a/riscv/insns/c_sub.h b/riscv/insns/c_sub.h deleted file mode 100644 index 9fd8932..0000000 --- a/riscv/insns/c_sub.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRD = CRS1 - CRS2; diff --git a/riscv/insns/c_sub3.h b/riscv/insns/c_sub3.h deleted file mode 100644 index 53afc84..0000000 --- a/riscv/insns/c_sub3.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -CRDS = CRS1S - CRS2BS; diff --git a/riscv/insns/c_sw.h b/riscv/insns/c_sw.h deleted file mode 100644 index f604adf..0000000 --- a/riscv/insns/c_sw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -mmu.store_uint32(CRS1S+CIMM5*4, CRS2S); diff --git a/riscv/insns/c_swsp.h b/riscv/insns/c_swsp.h deleted file mode 100644 index 0508f12..0000000 --- a/riscv/insns/c_swsp.h +++ /dev/null @@ -1,2 +0,0 @@ -require_rvc; -mmu.store_uint32(XPR[30]+CIMM6*4, CRS2); diff --git a/riscv/insns/cflush.h b/riscv/insns/cflush.h deleted file mode 100644 index 5117ca0..0000000 --- a/riscv/insns/cflush.h +++ /dev/null @@ -1 +0,0 @@ -require_supervisor; diff --git a/riscv/insns/di.h b/riscv/insns/di.h deleted file mode 100644 index 31280d5..0000000 --- a/riscv/insns/di.h +++ /dev/null @@ -1,4 +0,0 @@ -require_supervisor; -uint32_t temp = sr; -set_sr(sr & ~SR_ET); -RD = temp; diff --git a/riscv/insns/div.h b/riscv/insns/div.h deleted file mode 100644 index 82a4066..0000000 --- a/riscv/insns/div.h +++ /dev/null @@ -1,6 +0,0 @@ -if(RS2 == 0) - RD = UINT64_MAX; -else if(sreg_t(RS1) == INT64_MIN && sreg_t(RS2) == -1) - RD = RS1; -else - RD = sext_xprlen(sext_xprlen(RS1) / sext_xprlen(RS2)); diff --git a/riscv/insns/divu.h b/riscv/insns/divu.h deleted file mode 100644 index 681afd2..0000000 --- a/riscv/insns/divu.h +++ /dev/null @@ -1,4 +0,0 @@ -if(RS2 == 0) - RD = UINT64_MAX; -else - RD = sext_xprlen(zext_xprlen(RS1) / zext_xprlen(RS2)); diff --git a/riscv/insns/divuw.h b/riscv/insns/divuw.h deleted file mode 100644 index 0ceb040..0000000 --- a/riscv/insns/divuw.h +++ /dev/null @@ -1,5 +0,0 @@ -require_xpr64; -if(RS2 == 0) - RD = UINT64_MAX; -else - RD = sext32(zext32(RS1) / zext32(RS2)); diff --git a/riscv/insns/divw.h b/riscv/insns/divw.h deleted file mode 100644 index 51c3d80..0000000 --- a/riscv/insns/divw.h +++ /dev/null @@ -1,7 +0,0 @@ -require_xpr64; -if(RS2 == 0) - RD = UINT64_MAX; -else if(int32_t(RS1) == INT32_MIN && int32_t(RS2) == -1) - RD = RS1; -else - RD = sext32(int32_t(RS1) / int32_t(RS2)); diff --git a/riscv/insns/ei.h b/riscv/insns/ei.h deleted file mode 100644 index 8306aeb..0000000 --- a/riscv/insns/ei.h +++ /dev/null @@ -1,4 +0,0 @@ -require_supervisor; -uint32_t temp = sr; -set_sr(sr | SR_ET); -RD = temp; diff --git a/riscv/insns/eret.h b/riscv/insns/eret.h deleted file mode 100644 index 46d5bed..0000000 --- a/riscv/insns/eret.h +++ /dev/null @@ -1,5 +0,0 @@ -require_supervisor; -if(sr & SR_ET) - throw trap_illegal_instruction; -set_sr(((sr & SR_PS) ? sr : (sr & ~SR_S)) | SR_ET); -set_pc(epc); diff --git a/riscv/insns/fadd_d.h b/riscv/insns/fadd_d.h deleted file mode 100644 index 48c76a7..0000000 --- a/riscv/insns/fadd_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f64_add(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/fadd_s.h b/riscv/insns/fadd_s.h deleted file mode 100644 index 2fd5429..0000000 --- a/riscv/insns/fadd_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f32_add(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_d_l.h b/riscv/insns/fcvt_d_l.h deleted file mode 100644 index 68c0482..0000000 --- a/riscv/insns/fcvt_d_l.h +++ /dev/null @@ -1,5 +0,0 @@ -require_xpr64; -require_fp; -softfloat_roundingMode = RM; -FRD = i64_to_f64(RS1); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_d_lu.h b/riscv/insns/fcvt_d_lu.h deleted file mode 100644 index 2032758..0000000 --- a/riscv/insns/fcvt_d_lu.h +++ /dev/null @@ -1,5 +0,0 @@ -require_xpr64; -require_fp; -softfloat_roundingMode = RM; -FRD = ui64_to_f64(RS1); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_d_s.h b/riscv/insns/fcvt_d_s.h deleted file mode 100644 index 6b1a09c..0000000 --- a/riscv/insns/fcvt_d_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f32_to_f64(FRS1); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_d_w.h b/riscv/insns/fcvt_d_w.h deleted file mode 100644 index 52abd75..0000000 --- a/riscv/insns/fcvt_d_w.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = i32_to_f64((int32_t)RS1); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_d_wu.h b/riscv/insns/fcvt_d_wu.h deleted file mode 100644 index 61a8a78..0000000 --- a/riscv/insns/fcvt_d_wu.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = ui32_to_f64((uint32_t)RS1); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_l_d.h b/riscv/insns/fcvt_l_d.h deleted file mode 100644 index 206ba4f..0000000 --- a/riscv/insns/fcvt_l_d.h +++ /dev/null @@ -1,5 +0,0 @@ -require_xpr64; -require_fp; -softfloat_roundingMode = RM; -RD = f64_to_i64(FRS1, RM, true); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_l_s.h b/riscv/insns/fcvt_l_s.h deleted file mode 100644 index e05f476..0000000 --- a/riscv/insns/fcvt_l_s.h +++ /dev/null @@ -1,5 +0,0 @@ -require_xpr64; -require_fp; -softfloat_roundingMode = RM; -RD = f32_to_i64(FRS1, RM, true); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_lu_d.h b/riscv/insns/fcvt_lu_d.h deleted file mode 100644 index 44c3dd6..0000000 --- a/riscv/insns/fcvt_lu_d.h +++ /dev/null @@ -1,5 +0,0 @@ -require_xpr64; -require_fp; -softfloat_roundingMode = RM; -RD = f64_to_ui64(FRS1, RM, true); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_lu_s.h b/riscv/insns/fcvt_lu_s.h deleted file mode 100644 index 13de436..0000000 --- a/riscv/insns/fcvt_lu_s.h +++ /dev/null @@ -1,5 +0,0 @@ -require_xpr64; -require_fp; -softfloat_roundingMode = RM; -RD = f32_to_ui64(FRS1, RM, true); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_s_d.h b/riscv/insns/fcvt_s_d.h deleted file mode 100644 index e5289c4..0000000 --- a/riscv/insns/fcvt_s_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f64_to_f32(FRS1); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_s_l.h b/riscv/insns/fcvt_s_l.h deleted file mode 100644 index f149229..0000000 --- a/riscv/insns/fcvt_s_l.h +++ /dev/null @@ -1,5 +0,0 @@ -require_xpr64; -require_fp; -softfloat_roundingMode = RM; -FRD = i64_to_f32(RS1); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_s_lu.h b/riscv/insns/fcvt_s_lu.h deleted file mode 100644 index d9d0946..0000000 --- a/riscv/insns/fcvt_s_lu.h +++ /dev/null @@ -1,5 +0,0 @@ -require_xpr64; -require_fp; -softfloat_roundingMode = RM; -FRD = ui64_to_f32(RS1); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_s_w.h b/riscv/insns/fcvt_s_w.h deleted file mode 100644 index dedebb5..0000000 --- a/riscv/insns/fcvt_s_w.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = i32_to_f32((int32_t)RS1); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_s_wu.h b/riscv/insns/fcvt_s_wu.h deleted file mode 100644 index abb782c..0000000 --- a/riscv/insns/fcvt_s_wu.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = ui32_to_f32((uint32_t)RS1); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_w_d.h b/riscv/insns/fcvt_w_d.h deleted file mode 100644 index 88dc3d3..0000000 --- a/riscv/insns/fcvt_w_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -RD = sext32(f64_to_i32(FRS1, RM, true)); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_w_s.h b/riscv/insns/fcvt_w_s.h deleted file mode 100644 index f14cc19..0000000 --- a/riscv/insns/fcvt_w_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -RD = sext32(f32_to_i32(FRS1, RM, true)); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_wu_d.h b/riscv/insns/fcvt_wu_d.h deleted file mode 100644 index 43ad6f6..0000000 --- a/riscv/insns/fcvt_wu_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -RD = sext32(f64_to_ui32(FRS1, RM, true)); -set_fp_exceptions; diff --git a/riscv/insns/fcvt_wu_s.h b/riscv/insns/fcvt_wu_s.h deleted file mode 100644 index ff7a11c..0000000 --- a/riscv/insns/fcvt_wu_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -RD = sext32(f32_to_ui32(FRS1, RM, true)); -set_fp_exceptions; diff --git a/riscv/insns/fdiv_d.h b/riscv/insns/fdiv_d.h deleted file mode 100644 index aa00c98..0000000 --- a/riscv/insns/fdiv_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f64_div(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/fdiv_s.h b/riscv/insns/fdiv_s.h deleted file mode 100644 index 8c76587..0000000 --- a/riscv/insns/fdiv_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f32_div(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/fence.h b/riscv/insns/fence.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/fence_g_cv.h b/riscv/insns/fence_g_cv.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/fence_g_v.h b/riscv/insns/fence_g_v.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/fence_i.h b/riscv/insns/fence_i.h deleted file mode 100644 index a2dbffe..0000000 --- a/riscv/insns/fence_i.h +++ /dev/null @@ -1 +0,0 @@ -mmu.flush_icache(); diff --git a/riscv/insns/fence_l_cv.h b/riscv/insns/fence_l_cv.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/fence_l_v.h b/riscv/insns/fence_l_v.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/feq_d.h b/riscv/insns/feq_d.h deleted file mode 100644 index 9db8760..0000000 --- a/riscv/insns/feq_d.h +++ /dev/null @@ -1,3 +0,0 @@ -require_fp; -RD = f64_eq(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/feq_s.h b/riscv/insns/feq_s.h deleted file mode 100644 index 658e8f6..0000000 --- a/riscv/insns/feq_s.h +++ /dev/null @@ -1,3 +0,0 @@ -require_fp; -RD = f32_eq(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/fld.h b/riscv/insns/fld.h deleted file mode 100644 index 123dea4..0000000 --- a/riscv/insns/fld.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -FRD = mmu.load_int64(RS1+SIMM); diff --git a/riscv/insns/fle_d.h b/riscv/insns/fle_d.h deleted file mode 100644 index da76187..0000000 --- a/riscv/insns/fle_d.h +++ /dev/null @@ -1,3 +0,0 @@ -require_fp; -RD = f64_le(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/fle_s.h b/riscv/insns/fle_s.h deleted file mode 100644 index 9c83a17..0000000 --- a/riscv/insns/fle_s.h +++ /dev/null @@ -1,3 +0,0 @@ -require_fp; -RD = f32_le(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/flt_d.h b/riscv/insns/flt_d.h deleted file mode 100644 index 01d135a..0000000 --- a/riscv/insns/flt_d.h +++ /dev/null @@ -1,3 +0,0 @@ -require_fp; -RD = f64_lt(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/flt_s.h b/riscv/insns/flt_s.h deleted file mode 100644 index 52eee5d..0000000 --- a/riscv/insns/flt_s.h +++ /dev/null @@ -1,3 +0,0 @@ -require_fp; -RD = f32_lt(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/flw.h b/riscv/insns/flw.h deleted file mode 100644 index 335fd7d..0000000 --- a/riscv/insns/flw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -FRD = mmu.load_int32(RS1+SIMM); diff --git a/riscv/insns/fmadd_d.h b/riscv/insns/fmadd_d.h deleted file mode 100644 index f67853e..0000000 --- a/riscv/insns/fmadd_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f64_mulAdd(FRS1, FRS2, FRS3); -set_fp_exceptions; diff --git a/riscv/insns/fmadd_s.h b/riscv/insns/fmadd_s.h deleted file mode 100644 index 19db642..0000000 --- a/riscv/insns/fmadd_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f32_mulAdd(FRS1, FRS2, FRS3); -set_fp_exceptions; diff --git a/riscv/insns/fmax_d.h b/riscv/insns/fmax_d.h deleted file mode 100644 index cbbb343..0000000 --- a/riscv/insns/fmax_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -FRD = isNaNF64UI(FRS2) || f64_le_quiet(FRS2,FRS1) /* && FRS1 not NaN */ - ? FRS1 : FRS2; -set_fp_exceptions; diff --git a/riscv/insns/fmax_s.h b/riscv/insns/fmax_s.h deleted file mode 100644 index 8df665f..0000000 --- a/riscv/insns/fmax_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -FRD = isNaNF32UI(FRS2) || f32_le_quiet(FRS2,FRS1) /* && FRS1 not NaN */ - ? FRS1 : FRS2; -set_fp_exceptions; diff --git a/riscv/insns/fmin_d.h b/riscv/insns/fmin_d.h deleted file mode 100644 index 3d3d454..0000000 --- a/riscv/insns/fmin_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -FRD = isNaNF64UI(FRS2) || f64_lt_quiet(FRS1,FRS2) /* && FRS1 not NaN */ - ? FRS1 : FRS2; -set_fp_exceptions; diff --git a/riscv/insns/fmin_s.h b/riscv/insns/fmin_s.h deleted file mode 100644 index 994c860..0000000 --- a/riscv/insns/fmin_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -FRD = isNaNF32UI(FRS2) || f32_lt_quiet(FRS1,FRS2) /* && FRS1 not NaN */ - ? FRS1 : FRS2; -set_fp_exceptions; diff --git a/riscv/insns/fmovn.h b/riscv/insns/fmovn.h deleted file mode 100644 index 394b56c..0000000 --- a/riscv/insns/fmovn.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -if (RS1 & 0x1) FRD = FRS2; diff --git a/riscv/insns/fmovz.h b/riscv/insns/fmovz.h deleted file mode 100644 index 7862216..0000000 --- a/riscv/insns/fmovz.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -if (~RS1 & 0x1) FRD = FRS2; diff --git a/riscv/insns/fmsub_d.h b/riscv/insns/fmsub_d.h deleted file mode 100644 index b1e9340..0000000 --- a/riscv/insns/fmsub_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f64_mulAdd(FRS1, FRS2, FRS3 ^ (uint64_t)INT64_MIN); -set_fp_exceptions; diff --git a/riscv/insns/fmsub_s.h b/riscv/insns/fmsub_s.h deleted file mode 100644 index d3349f5..0000000 --- a/riscv/insns/fmsub_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f32_mulAdd(FRS1, FRS2, FRS3 ^ (uint32_t)INT32_MIN); -set_fp_exceptions; diff --git a/riscv/insns/fmul_d.h b/riscv/insns/fmul_d.h deleted file mode 100644 index a8adedd..0000000 --- a/riscv/insns/fmul_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f64_mul(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/fmul_s.h b/riscv/insns/fmul_s.h deleted file mode 100644 index 6475578..0000000 --- a/riscv/insns/fmul_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f32_mul(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/fnmadd_d.h b/riscv/insns/fnmadd_d.h deleted file mode 100644 index 1e2ee27..0000000 --- a/riscv/insns/fnmadd_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f64_mulAdd(FRS1, FRS2, FRS3) ^ (uint64_t)INT64_MIN; -set_fp_exceptions; diff --git a/riscv/insns/fnmadd_s.h b/riscv/insns/fnmadd_s.h deleted file mode 100644 index 78abb78..0000000 --- a/riscv/insns/fnmadd_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f32_mulAdd(FRS1, FRS2, FRS3) ^ (uint32_t)INT32_MIN; -set_fp_exceptions; diff --git a/riscv/insns/fnmsub_d.h b/riscv/insns/fnmsub_d.h deleted file mode 100644 index ae643a5..0000000 --- a/riscv/insns/fnmsub_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f64_mulAdd(FRS1, FRS2, FRS3 ^ (uint64_t)INT64_MIN) ^ (uint64_t)INT64_MIN; -set_fp_exceptions; diff --git a/riscv/insns/fnmsub_s.h b/riscv/insns/fnmsub_s.h deleted file mode 100644 index cbb70ba..0000000 --- a/riscv/insns/fnmsub_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f32_mulAdd(FRS1, FRS2, FRS3 ^ (uint32_t)INT32_MIN) ^ (uint32_t)INT32_MIN; -set_fp_exceptions; diff --git a/riscv/insns/fsd.h b/riscv/insns/fsd.h deleted file mode 100644 index 113398e..0000000 --- a/riscv/insns/fsd.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -mmu.store_uint64(RS1+BIMM, FRS2); diff --git a/riscv/insns/fsgnj_d.h b/riscv/insns/fsgnj_d.h deleted file mode 100644 index f66e804..0000000 --- a/riscv/insns/fsgnj_d.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -FRD = (FRS1 &~ INT64_MIN) | (FRS2 & INT64_MIN); diff --git a/riscv/insns/fsgnj_s.h b/riscv/insns/fsgnj_s.h deleted file mode 100644 index 35609ac..0000000 --- a/riscv/insns/fsgnj_s.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -FRD = (FRS1 &~ (uint32_t)INT32_MIN) | (FRS2 & (uint32_t)INT32_MIN); diff --git a/riscv/insns/fsgnjn_d.h b/riscv/insns/fsgnjn_d.h deleted file mode 100644 index 22de215..0000000 --- a/riscv/insns/fsgnjn_d.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -FRD = (FRS1 &~ INT64_MIN) | ((~FRS2) & INT64_MIN); diff --git a/riscv/insns/fsgnjn_s.h b/riscv/insns/fsgnjn_s.h deleted file mode 100644 index dd66d71..0000000 --- a/riscv/insns/fsgnjn_s.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -FRD = (FRS1 &~ (uint32_t)INT32_MIN) | ((~FRS2) & (uint32_t)INT32_MIN); diff --git a/riscv/insns/fsgnjx_d.h b/riscv/insns/fsgnjx_d.h deleted file mode 100644 index 331b6e4..0000000 --- a/riscv/insns/fsgnjx_d.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -FRD = FRS1 ^ (FRS2 & INT64_MIN); diff --git a/riscv/insns/fsgnjx_s.h b/riscv/insns/fsgnjx_s.h deleted file mode 100644 index b455406..0000000 --- a/riscv/insns/fsgnjx_s.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -FRD = FRS1 ^ (FRS2 & (uint32_t)INT32_MIN); diff --git a/riscv/insns/fsqrt_d.h b/riscv/insns/fsqrt_d.h deleted file mode 100644 index 7647c9c..0000000 --- a/riscv/insns/fsqrt_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f64_sqrt(FRS1); -set_fp_exceptions; diff --git a/riscv/insns/fsqrt_s.h b/riscv/insns/fsqrt_s.h deleted file mode 100644 index 426f241..0000000 --- a/riscv/insns/fsqrt_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f32_sqrt(FRS1); -set_fp_exceptions; diff --git a/riscv/insns/fsub_d.h b/riscv/insns/fsub_d.h deleted file mode 100644 index e25eebb..0000000 --- a/riscv/insns/fsub_d.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f64_sub(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/fsub_s.h b/riscv/insns/fsub_s.h deleted file mode 100644 index 6c64d04..0000000 --- a/riscv/insns/fsub_s.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -softfloat_roundingMode = RM; -FRD = f32_sub(FRS1, FRS2); -set_fp_exceptions; diff --git a/riscv/insns/fsw.h b/riscv/insns/fsw.h deleted file mode 100644 index 23d3333..0000000 --- a/riscv/insns/fsw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -mmu.store_uint32(RS1+BIMM, FRS2); diff --git a/riscv/insns/j.h b/riscv/insns/j.h deleted file mode 100644 index 3a4da2a..0000000 --- a/riscv/insns/j.h +++ /dev/null @@ -1 +0,0 @@ -set_pc(JUMP_TARGET); diff --git a/riscv/insns/jal.h b/riscv/insns/jal.h deleted file mode 100644 index 41dc403..0000000 --- a/riscv/insns/jal.h +++ /dev/null @@ -1,2 +0,0 @@ -RA = npc; -set_pc(JUMP_TARGET); diff --git a/riscv/insns/jalr_c.h b/riscv/insns/jalr_c.h deleted file mode 100644 index 91be911..0000000 --- a/riscv/insns/jalr_c.h +++ /dev/null @@ -1,3 +0,0 @@ -reg_t temp = RS1; -RD = npc; -set_pc(temp + SIMM); diff --git a/riscv/insns/jalr_j.h b/riscv/insns/jalr_j.h deleted file mode 100644 index 0d2ef12..0000000 --- a/riscv/insns/jalr_j.h +++ /dev/null @@ -1 +0,0 @@ -#include "insns/jalr_c.h" diff --git a/riscv/insns/jalr_r.h b/riscv/insns/jalr_r.h deleted file mode 100644 index 0d2ef12..0000000 --- a/riscv/insns/jalr_r.h +++ /dev/null @@ -1 +0,0 @@ -#include "insns/jalr_c.h" diff --git a/riscv/insns/lb.h b/riscv/insns/lb.h deleted file mode 100644 index 81ba7de..0000000 --- a/riscv/insns/lb.h +++ /dev/null @@ -1 +0,0 @@ -RD = mmu.load_int8(RS1+SIMM); diff --git a/riscv/insns/lbu.h b/riscv/insns/lbu.h deleted file mode 100644 index 12c688a..0000000 --- a/riscv/insns/lbu.h +++ /dev/null @@ -1 +0,0 @@ -RD = mmu.load_uint8(RS1+SIMM); diff --git a/riscv/insns/ld.h b/riscv/insns/ld.h deleted file mode 100644 index 940d348..0000000 --- a/riscv/insns/ld.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = mmu.load_int64(RS1+SIMM); diff --git a/riscv/insns/lh.h b/riscv/insns/lh.h deleted file mode 100644 index ec25bc4..0000000 --- a/riscv/insns/lh.h +++ /dev/null @@ -1 +0,0 @@ -RD = mmu.load_int16(RS1+SIMM); diff --git a/riscv/insns/lhu.h b/riscv/insns/lhu.h deleted file mode 100644 index 0999c00..0000000 --- a/riscv/insns/lhu.h +++ /dev/null @@ -1 +0,0 @@ -RD = mmu.load_uint16(RS1+SIMM); diff --git a/riscv/insns/lui.h b/riscv/insns/lui.h deleted file mode 100644 index 6af2a2a..0000000 --- a/riscv/insns/lui.h +++ /dev/null @@ -1 +0,0 @@ -RD = sext32(BIGIMM << IMM_BITS); diff --git a/riscv/insns/lw.h b/riscv/insns/lw.h deleted file mode 100644 index 769c9fd..0000000 --- a/riscv/insns/lw.h +++ /dev/null @@ -1 +0,0 @@ -RD = mmu.load_int32(RS1+SIMM); diff --git a/riscv/insns/lwu.h b/riscv/insns/lwu.h deleted file mode 100644 index f8f9841..0000000 --- a/riscv/insns/lwu.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = mmu.load_uint32(RS1+SIMM); diff --git a/riscv/insns/mffsr.h b/riscv/insns/mffsr.h deleted file mode 100644 index 29debc4..0000000 --- a/riscv/insns/mffsr.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -RD = fsr; diff --git a/riscv/insns/mfpcr.h b/riscv/insns/mfpcr.h deleted file mode 100644 index e0c67ae..0000000 --- a/riscv/insns/mfpcr.h +++ /dev/null @@ -1,68 +0,0 @@ -require_supervisor; - -reg_t val; - -switch(insn.rtype.rs2) -{ - case 0: - val = sr; - break; - case 1: - val = epc; - break; - case 2: - val = badvaddr; - break; - case 3: - val = evec; - break; - case 4: - val = count; - break; - case 5: - val = compare; - break; - case 6: - val = cause; - break; - case 7: - val = 0; - cause &= ~(1 << (IPI_IRQ+CAUSE_IP_SHIFT)); - break; - - case 8: - val = mmu.memsz >> PGSHIFT; - break; - - case 9: - val = mmu.get_ptbr(); - break; - - case 10: - val = id; - break; - - case 11: - val = vecbanks; - break; - - case 12: - val = sim->num_cores(); - break; - - case 17: - fromhost = val = sim->get_fromhost(); - break; - - case 24: - val = pcr_k0; - break; - case 25: - val = pcr_k1; - break; - - default: - val = -1; -} - -RD = sext_xprlen(val); diff --git a/riscv/insns/mftx_d.h b/riscv/insns/mftx_d.h deleted file mode 100644 index 31be4cb..0000000 --- a/riscv/insns/mftx_d.h +++ /dev/null @@ -1,3 +0,0 @@ -require_xpr64; -require_fp; -RD = FRS2; diff --git a/riscv/insns/mftx_s.h b/riscv/insns/mftx_s.h deleted file mode 100644 index 589b33b..0000000 --- a/riscv/insns/mftx_s.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -RD = sext32(FRS2); diff --git a/riscv/insns/movn.h b/riscv/insns/movn.h deleted file mode 100644 index 402d6d3..0000000 --- a/riscv/insns/movn.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -if (RS1 & 0x1) RD = RS2; diff --git a/riscv/insns/movz.h b/riscv/insns/movz.h deleted file mode 100644 index 74cf8a9..0000000 --- a/riscv/insns/movz.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -if (~RS1 & 0x1) RD = RS2; diff --git a/riscv/insns/mtfsr.h b/riscv/insns/mtfsr.h deleted file mode 100644 index cc6f9ea..0000000 --- a/riscv/insns/mtfsr.h +++ /dev/null @@ -1,4 +0,0 @@ -require_fp; -uint32_t tmp = fsr; -set_fsr(RS1); -RD = tmp; diff --git a/riscv/insns/mtpcr.h b/riscv/insns/mtpcr.h deleted file mode 100644 index 46fbfdb..0000000 --- a/riscv/insns/mtpcr.h +++ /dev/null @@ -1,46 +0,0 @@ -require_supervisor; - -switch(insn.rtype.rs2) -{ - case 0: - set_sr(RS1); - break; - case 1: - epc = RS1; - break; - case 3: - evec = RS1; - break; - case 4: - count = RS1; - break; - case 5: - cause &= ~(1 << (TIMER_IRQ+CAUSE_IP_SHIFT)); - compare = RS1; - break; - - case 7: - sim->send_ipi(RS1); - break; - - case 9: - mmu.set_ptbr(RS1); - break; - - case 11: - vecbanks = RS1 & 0xff; - vecbanks_count = __builtin_popcountll(vecbanks); - break; - - case 16: - tohost = RS1; - sim->set_tohost(RS1); - break; - - case 24: - pcr_k0 = RS1; - break; - case 25: - pcr_k1 = RS1; - break; -} diff --git a/riscv/insns/mul.h b/riscv/insns/mul.h deleted file mode 100644 index 770d733..0000000 --- a/riscv/insns/mul.h +++ /dev/null @@ -1 +0,0 @@ -RD = sext_xprlen(RS1 * RS2); diff --git a/riscv/insns/mulh.h b/riscv/insns/mulh.h deleted file mode 100644 index f771a62..0000000 --- a/riscv/insns/mulh.h +++ /dev/null @@ -1,8 +0,0 @@ -if(xpr64) -{ - int64_t a = RS1; - int64_t b = RS2; - RD = (int128_t(a) * int128_t(b)) >> 64; -} -else - RD = sext32((sext32(RS1) * sext32(RS2)) >> 32); diff --git a/riscv/insns/mulhsu.h b/riscv/insns/mulhsu.h deleted file mode 100644 index c832657..0000000 --- a/riscv/insns/mulhsu.h +++ /dev/null @@ -1,8 +0,0 @@ -if(xpr64) -{ - int64_t a = RS1; - uint64_t b = RS2; - RD = (int128_t(a) * uint128_t(b)) >> 64; -} -else - RD = sext32((sext32(RS1) * reg_t((uint32_t)RS2)) >> 32); diff --git a/riscv/insns/mulhu.h b/riscv/insns/mulhu.h deleted file mode 100644 index 6334426..0000000 --- a/riscv/insns/mulhu.h +++ /dev/null @@ -1,4 +0,0 @@ -if(xpr64) - RD = (uint128_t(RS1) * uint128_t(RS2)) >> 64; -else - RD = sext32(((uint64_t)(uint32_t)RS1 * (uint64_t)(uint32_t)RS2) >> 32); diff --git a/riscv/insns/mulw.h b/riscv/insns/mulw.h deleted file mode 100644 index 7b0a934..0000000 --- a/riscv/insns/mulw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = sext32(RS1 * RS2); diff --git a/riscv/insns/mxtf_d.h b/riscv/insns/mxtf_d.h deleted file mode 100644 index 29792ec..0000000 --- a/riscv/insns/mxtf_d.h +++ /dev/null @@ -1,3 +0,0 @@ -require_xpr64; -require_fp; -FRD = RS1; diff --git a/riscv/insns/mxtf_s.h b/riscv/insns/mxtf_s.h deleted file mode 100644 index 54546ea..0000000 --- a/riscv/insns/mxtf_s.h +++ /dev/null @@ -1,2 +0,0 @@ -require_fp; -FRD = RS1; diff --git a/riscv/insns/or.h b/riscv/insns/or.h deleted file mode 100644 index 07bcac3..0000000 --- a/riscv/insns/or.h +++ /dev/null @@ -1 +0,0 @@ -RD = RS1 | RS2; diff --git a/riscv/insns/ori.h b/riscv/insns/ori.h deleted file mode 100644 index 9561b97..0000000 --- a/riscv/insns/ori.h +++ /dev/null @@ -1 +0,0 @@ -RD = SIMM | RS1; diff --git a/riscv/insns/rdcycle.h b/riscv/insns/rdcycle.h deleted file mode 100644 index 9b966a6..0000000 --- a/riscv/insns/rdcycle.h +++ /dev/null @@ -1 +0,0 @@ -RD = cycle; diff --git a/riscv/insns/rdinstret.h b/riscv/insns/rdinstret.h deleted file mode 100644 index 9b966a6..0000000 --- a/riscv/insns/rdinstret.h +++ /dev/null @@ -1 +0,0 @@ -RD = cycle; diff --git a/riscv/insns/rdnpc.h b/riscv/insns/rdnpc.h deleted file mode 100644 index 5525421..0000000 --- a/riscv/insns/rdnpc.h +++ /dev/null @@ -1 +0,0 @@ -RD = npc; diff --git a/riscv/insns/rdtime.h b/riscv/insns/rdtime.h deleted file mode 100644 index 9b966a6..0000000 --- a/riscv/insns/rdtime.h +++ /dev/null @@ -1 +0,0 @@ -RD = cycle; diff --git a/riscv/insns/rem.h b/riscv/insns/rem.h deleted file mode 100644 index ac82a56..0000000 --- a/riscv/insns/rem.h +++ /dev/null @@ -1,6 +0,0 @@ -if(RS2 == 0) - RD = RS1; -else if(sreg_t(RS1) == INT64_MIN && sreg_t(RS2) == -1) - RD = 0; -else - RD = sext_xprlen(sext_xprlen(RS1) % sext_xprlen(RS2)); diff --git a/riscv/insns/remu.h b/riscv/insns/remu.h deleted file mode 100644 index c698aca..0000000 --- a/riscv/insns/remu.h +++ /dev/null @@ -1,4 +0,0 @@ -if(RS2 == 0) - RD = RS1; -else - RD = sext_xprlen(zext_xprlen(RS1) % zext_xprlen(RS2)); diff --git a/riscv/insns/remuw.h b/riscv/insns/remuw.h deleted file mode 100644 index 8234af3..0000000 --- a/riscv/insns/remuw.h +++ /dev/null @@ -1,5 +0,0 @@ -require_xpr64; -if(RS2 == 0) - RD = RS1; -else - RD = sext32(zext_xprlen(RS1) % zext_xprlen(RS2)); diff --git a/riscv/insns/remw.h b/riscv/insns/remw.h deleted file mode 100644 index 93c3858..0000000 --- a/riscv/insns/remw.h +++ /dev/null @@ -1,7 +0,0 @@ -require_xpr64; -if(RS2 == 0) - RD = RS1; -else if(int32_t(RS1) == INT32_MIN && int32_t(RS2) == -1) - RD = 0; -else - RD = sext32(int32_t(RS1) % int32_t(RS2)); diff --git a/riscv/insns/sb.h b/riscv/insns/sb.h deleted file mode 100644 index af5bd10..0000000 --- a/riscv/insns/sb.h +++ /dev/null @@ -1 +0,0 @@ -mmu.store_uint8(RS1+BIMM, RS2); diff --git a/riscv/insns/sd.h b/riscv/insns/sd.h deleted file mode 100644 index 2009149..0000000 --- a/riscv/insns/sd.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -mmu.store_uint64(RS1+BIMM, RS2); diff --git a/riscv/insns/sh.h b/riscv/insns/sh.h deleted file mode 100644 index a484e1e..0000000 --- a/riscv/insns/sh.h +++ /dev/null @@ -1 +0,0 @@ -mmu.store_uint16(RS1+BIMM, RS2); diff --git a/riscv/insns/sll.h b/riscv/insns/sll.h deleted file mode 100644 index 86eb966..0000000 --- a/riscv/insns/sll.h +++ /dev/null @@ -1 +0,0 @@ -RD = sext_xprlen(RS1 << (RS2 & (xprlen-1))); diff --git a/riscv/insns/slli.h b/riscv/insns/slli.h deleted file mode 100644 index bfaf430..0000000 --- a/riscv/insns/slli.h +++ /dev/null @@ -1,8 +0,0 @@ -if(xpr64) - RD = RS1 << SHAMT; -else -{ - if(SHAMT & 0x20) - throw trap_illegal_instruction; - RD = sext32(RS1 << SHAMT); -} diff --git a/riscv/insns/slliw.h b/riscv/insns/slliw.h deleted file mode 100644 index 1f6e50d..0000000 --- a/riscv/insns/slliw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = sext32(RS1 << SHAMTW); diff --git a/riscv/insns/sllw.h b/riscv/insns/sllw.h deleted file mode 100644 index f3356d8..0000000 --- a/riscv/insns/sllw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = sext32(RS1 << (RS2 & 0x1F)); diff --git a/riscv/insns/slt.h b/riscv/insns/slt.h deleted file mode 100644 index 5c50534..0000000 --- a/riscv/insns/slt.h +++ /dev/null @@ -1 +0,0 @@ -RD = sreg_t(cmp_trunc(RS1)) < sreg_t(cmp_trunc(RS2)); diff --git a/riscv/insns/slti.h b/riscv/insns/slti.h deleted file mode 100644 index 1dcd892..0000000 --- a/riscv/insns/slti.h +++ /dev/null @@ -1 +0,0 @@ -RD = sreg_t(cmp_trunc(RS1)) < sreg_t(cmp_trunc(SIMM)); diff --git a/riscv/insns/sltiu.h b/riscv/insns/sltiu.h deleted file mode 100644 index 45e579b..0000000 --- a/riscv/insns/sltiu.h +++ /dev/null @@ -1 +0,0 @@ -RD = cmp_trunc(RS1) < cmp_trunc(SIMM); diff --git a/riscv/insns/sltu.h b/riscv/insns/sltu.h deleted file mode 100644 index 2c5bdc3..0000000 --- a/riscv/insns/sltu.h +++ /dev/null @@ -1 +0,0 @@ -RD = cmp_trunc(RS1) < cmp_trunc(RS2); diff --git a/riscv/insns/sra.h b/riscv/insns/sra.h deleted file mode 100644 index 7102da0..0000000 --- a/riscv/insns/sra.h +++ /dev/null @@ -1 +0,0 @@ -RD = sext_xprlen(sext_xprlen(RS1) >> (RS2 & (xprlen-1))); diff --git a/riscv/insns/srai.h b/riscv/insns/srai.h deleted file mode 100644 index bb17d27..0000000 --- a/riscv/insns/srai.h +++ /dev/null @@ -1,8 +0,0 @@ -if(xpr64) - RD = sreg_t(RS1) >> SHAMT; -else -{ - if(SHAMT & 0x20) - throw trap_illegal_instruction; - RD = sext32(int32_t(RS1) >> SHAMT); -} diff --git a/riscv/insns/sraiw.h b/riscv/insns/sraiw.h deleted file mode 100644 index 4c56730..0000000 --- a/riscv/insns/sraiw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = sext32(int32_t(RS1) >> SHAMTW); diff --git a/riscv/insns/sraw.h b/riscv/insns/sraw.h deleted file mode 100644 index d178374..0000000 --- a/riscv/insns/sraw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = sext32(int32_t(RS1) >> (RS2 & 0x1F)); diff --git a/riscv/insns/srl.h b/riscv/insns/srl.h deleted file mode 100644 index 8230d27..0000000 --- a/riscv/insns/srl.h +++ /dev/null @@ -1,4 +0,0 @@ -if(xpr64) - RD = RS1 >> (RS2 & 0x3F); -else - RD = sext32((uint32_t)RS1 >> (RS2 & 0x1F)); diff --git a/riscv/insns/srli.h b/riscv/insns/srli.h deleted file mode 100644 index 5378fd1..0000000 --- a/riscv/insns/srli.h +++ /dev/null @@ -1,8 +0,0 @@ -if(xpr64) - RD = RS1 >> SHAMT; -else -{ - if(SHAMT & 0x20) - throw trap_illegal_instruction; - RD = sext32((uint32_t)RS1 >> SHAMT); -} diff --git a/riscv/insns/srliw.h b/riscv/insns/srliw.h deleted file mode 100644 index c400507..0000000 --- a/riscv/insns/srliw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = sext32((uint32_t)RS1 >> SHAMTW); diff --git a/riscv/insns/srlw.h b/riscv/insns/srlw.h deleted file mode 100644 index b206f7c..0000000 --- a/riscv/insns/srlw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_xpr64; -RD = sext32((uint32_t)RS1 >> (RS2 & 0x1F)); diff --git a/riscv/insns/stop.h b/riscv/insns/stop.h deleted file mode 100644 index 791a82c..0000000 --- a/riscv/insns/stop.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -utmode = false; -throw vt_command_stop; diff --git a/riscv/insns/sub.h b/riscv/insns/sub.h deleted file mode 100644 index 2b1e057..0000000 --- a/riscv/insns/sub.h +++ /dev/null @@ -1 +0,0 @@ -RD = sext_xprlen(RS1 - RS2); diff --git a/riscv/insns/subw.h b/riscv/insns/subw.h deleted file mode 100644 index 28db334..0000000 --- a/riscv/insns/subw.h +++ /dev/null @@ -1,3 +0,0 @@ -require_xpr64; -RD = sext32(RS1 - RS2); - diff --git a/riscv/insns/sw.h b/riscv/insns/sw.h deleted file mode 100644 index dbe260f..0000000 --- a/riscv/insns/sw.h +++ /dev/null @@ -1 +0,0 @@ -mmu.store_uint32(RS1+BIMM, RS2); diff --git a/riscv/insns/syscall.h b/riscv/insns/syscall.h deleted file mode 100644 index 2c7199d..0000000 --- a/riscv/insns/syscall.h +++ /dev/null @@ -1 +0,0 @@ -throw trap_syscall; diff --git a/riscv/insns/utidx.h b/riscv/insns/utidx.h deleted file mode 100644 index b3c944c..0000000 --- a/riscv/insns/utidx.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -RD = utidx; diff --git a/riscv/insns/vf.h b/riscv/insns/vf.h deleted file mode 100644 index 7779645..0000000 --- a/riscv/insns/vf.h +++ /dev/null @@ -1,8 +0,0 @@ -require_vector; -for (int i=0; ipc = RS1+SIMM; - uts[i]->utmode = true; - while (uts[i]->utmode) - uts[i]->step(1, false); // XXX -} diff --git a/riscv/insns/vfld.h b/riscv/insns/vfld.h deleted file mode 100644 index 9b40470..0000000 --- a/riscv/insns/vfld.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_fp; -VEC_LOAD(FRD, load_int64, 8); diff --git a/riscv/insns/vflsegd.h b/riscv/insns/vflsegd.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vflsegstd.h b/riscv/insns/vflsegstd.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vflsegstw.h b/riscv/insns/vflsegstw.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vflsegw.h b/riscv/insns/vflsegw.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vflstd.h b/riscv/insns/vflstd.h deleted file mode 100644 index fa9b32d..0000000 --- a/riscv/insns/vflstd.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_fp; -VEC_LOAD(FRD, load_int64, RS2); diff --git a/riscv/insns/vflstw.h b/riscv/insns/vflstw.h deleted file mode 100644 index 716c818..0000000 --- a/riscv/insns/vflstw.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_fp; -VEC_LOAD(FRD, load_int32, RS2); diff --git a/riscv/insns/vflw.h b/riscv/insns/vflw.h deleted file mode 100644 index 75fdd04..0000000 --- a/riscv/insns/vflw.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_fp; -VEC_LOAD(FRD, load_int32, 4); diff --git a/riscv/insns/vfmst.h b/riscv/insns/vfmst.h deleted file mode 100644 index 20fa123..0000000 --- a/riscv/insns/vfmst.h +++ /dev/null @@ -1,4 +0,0 @@ -require_vector; -require_fp; -demand(0 <= RS2 && RS2 < MAX_UTS, "ut not in range!"); -UT_FRD(RS2) = FRS1; diff --git a/riscv/insns/vfmsv.h b/riscv/insns/vfmsv.h deleted file mode 100644 index a9aa876..0000000 --- a/riscv/insns/vfmsv.h +++ /dev/null @@ -1,5 +0,0 @@ -require_vector; -require_fp; -UT_LOOP_START - UT_LOOP_FRD = FRS1; -UT_LOOP_END diff --git a/riscv/insns/vfmts.h b/riscv/insns/vfmts.h deleted file mode 100644 index 6f56b25..0000000 --- a/riscv/insns/vfmts.h +++ /dev/null @@ -1,4 +0,0 @@ -require_vector; -require_fp; -demand(0 <= RS2 && RS2 < MAX_UTS, "ut not in range"); -FRD = UT_FRS1(RS2); diff --git a/riscv/insns/vfmvv.h b/riscv/insns/vfmvv.h deleted file mode 100644 index 279da21..0000000 --- a/riscv/insns/vfmvv.h +++ /dev/null @@ -1,5 +0,0 @@ -require_vector; -require_fp; -UT_LOOP_START - UT_LOOP_FRD = UT_LOOP_FRS1; -UT_LOOP_END diff --git a/riscv/insns/vfsd.h b/riscv/insns/vfsd.h deleted file mode 100644 index f619fc8..0000000 --- a/riscv/insns/vfsd.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_fp; -VEC_STORE(FRD, store_uint64, 8); diff --git a/riscv/insns/vfssegd.h b/riscv/insns/vfssegd.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vfssegstd.h b/riscv/insns/vfssegstd.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vfssegstw.h b/riscv/insns/vfssegstw.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vfssegw.h b/riscv/insns/vfssegw.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vfsstd.h b/riscv/insns/vfsstd.h deleted file mode 100644 index b3bb260..0000000 --- a/riscv/insns/vfsstd.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_fp; -VEC_STORE(FRD, store_uint64, RS2); diff --git a/riscv/insns/vfsstw.h b/riscv/insns/vfsstw.h deleted file mode 100644 index 9cef9b0..0000000 --- a/riscv/insns/vfsstw.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_fp; -VEC_STORE(FRD, store_uint32, RS2); diff --git a/riscv/insns/vfsw.h b/riscv/insns/vfsw.h deleted file mode 100644 index 3fe3d3f..0000000 --- a/riscv/insns/vfsw.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_fp; -VEC_STORE(FRD, store_uint32, 4); diff --git a/riscv/insns/vlb.h b/riscv/insns/vlb.h deleted file mode 100644 index 618380a..0000000 --- a/riscv/insns/vlb.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_int8, 1); diff --git a/riscv/insns/vlbu.h b/riscv/insns/vlbu.h deleted file mode 100644 index f92c8b5..0000000 --- a/riscv/insns/vlbu.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_uint8, 1); diff --git a/riscv/insns/vld.h b/riscv/insns/vld.h deleted file mode 100644 index fb7a3c5..0000000 --- a/riscv/insns/vld.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_xpr64; -VEC_LOAD(RD, load_int64, 8); diff --git a/riscv/insns/vlh.h b/riscv/insns/vlh.h deleted file mode 100644 index 269c2a8..0000000 --- a/riscv/insns/vlh.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_int16, 2); diff --git a/riscv/insns/vlhu.h b/riscv/insns/vlhu.h deleted file mode 100644 index 7a2019d..0000000 --- a/riscv/insns/vlhu.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_uint16, 2); diff --git a/riscv/insns/vlsegb.h b/riscv/insns/vlsegb.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegbu.h b/riscv/insns/vlsegbu.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegd.h b/riscv/insns/vlsegd.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegh.h b/riscv/insns/vlsegh.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlseghu.h b/riscv/insns/vlseghu.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegstb.h b/riscv/insns/vlsegstb.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegstbu.h b/riscv/insns/vlsegstbu.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegstd.h b/riscv/insns/vlsegstd.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegsth.h b/riscv/insns/vlsegsth.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegsthu.h b/riscv/insns/vlsegsthu.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegstw.h b/riscv/insns/vlsegstw.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegstwu.h b/riscv/insns/vlsegstwu.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegw.h b/riscv/insns/vlsegw.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlsegwu.h b/riscv/insns/vlsegwu.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vlstb.h b/riscv/insns/vlstb.h deleted file mode 100644 index 219d90e..0000000 --- a/riscv/insns/vlstb.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_int8, RS2); diff --git a/riscv/insns/vlstbu.h b/riscv/insns/vlstbu.h deleted file mode 100644 index 09faa29..0000000 --- a/riscv/insns/vlstbu.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_uint8, RS2); diff --git a/riscv/insns/vlstd.h b/riscv/insns/vlstd.h deleted file mode 100644 index 5e5de9c..0000000 --- a/riscv/insns/vlstd.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_xpr64; -VEC_LOAD(RD, load_int64, RS2); diff --git a/riscv/insns/vlsth.h b/riscv/insns/vlsth.h deleted file mode 100644 index af6b5b5..0000000 --- a/riscv/insns/vlsth.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_int16, RS2); diff --git a/riscv/insns/vlsthu.h b/riscv/insns/vlsthu.h deleted file mode 100644 index 0fe8452..0000000 --- a/riscv/insns/vlsthu.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_uint16, RS2); diff --git a/riscv/insns/vlstw.h b/riscv/insns/vlstw.h deleted file mode 100644 index 5375dc0..0000000 --- a/riscv/insns/vlstw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_int32, RS2); diff --git a/riscv/insns/vlstwu.h b/riscv/insns/vlstwu.h deleted file mode 100644 index 328e23f..0000000 --- a/riscv/insns/vlstwu.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_uint32, RS2); diff --git a/riscv/insns/vlw.h b/riscv/insns/vlw.h deleted file mode 100644 index 6e35911..0000000 --- a/riscv/insns/vlw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_int32, 4); diff --git a/riscv/insns/vlwu.h b/riscv/insns/vlwu.h deleted file mode 100644 index 4fa1489..0000000 --- a/riscv/insns/vlwu.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_LOAD(RD, load_uint32, 4); diff --git a/riscv/insns/vmst.h b/riscv/insns/vmst.h deleted file mode 100644 index 7b7cae1..0000000 --- a/riscv/insns/vmst.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -demand(0 <= RS2 && RS2 < MAX_UTS, "ut not in range!"); -UT_RD(RS2) = RS1; diff --git a/riscv/insns/vmsv.h b/riscv/insns/vmsv.h deleted file mode 100644 index c6f4c2c..0000000 --- a/riscv/insns/vmsv.h +++ /dev/null @@ -1,4 +0,0 @@ -require_vector; -UT_LOOP_START - UT_LOOP_RD = RS1; -UT_LOOP_END diff --git a/riscv/insns/vmts.h b/riscv/insns/vmts.h deleted file mode 100644 index a69e388..0000000 --- a/riscv/insns/vmts.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -demand(0 <= RS2 && RS2 < MAX_UTS, "ut not in range"); -RD = UT_RS1(RS2); diff --git a/riscv/insns/vmvv.h b/riscv/insns/vmvv.h deleted file mode 100644 index 91d63d4..0000000 --- a/riscv/insns/vmvv.h +++ /dev/null @@ -1,4 +0,0 @@ -require_vector; -UT_LOOP_START - UT_LOOP_RD = UT_LOOP_RS1; -UT_LOOP_END diff --git a/riscv/insns/vsb.h b/riscv/insns/vsb.h deleted file mode 100644 index c3d5b9d..0000000 --- a/riscv/insns/vsb.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_STORE(RD, store_uint8, 1); diff --git a/riscv/insns/vsd.h b/riscv/insns/vsd.h deleted file mode 100644 index 9c02069..0000000 --- a/riscv/insns/vsd.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_xpr64; -VEC_STORE(RD, store_uint64, 8); diff --git a/riscv/insns/vsetvl.h b/riscv/insns/vsetvl.h deleted file mode 100644 index c2212ff..0000000 --- a/riscv/insns/vsetvl.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -setvl(RS1); -RD = VL; diff --git a/riscv/insns/vsh.h b/riscv/insns/vsh.h deleted file mode 100644 index 623eda8..0000000 --- a/riscv/insns/vsh.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_STORE(RD, store_uint16, 2); diff --git a/riscv/insns/vssegb.h b/riscv/insns/vssegb.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vssegd.h b/riscv/insns/vssegd.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vssegh.h b/riscv/insns/vssegh.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vssegstb.h b/riscv/insns/vssegstb.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vssegstd.h b/riscv/insns/vssegstd.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vssegsth.h b/riscv/insns/vssegsth.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vssegstw.h b/riscv/insns/vssegstw.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vssegw.h b/riscv/insns/vssegw.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vsstb.h b/riscv/insns/vsstb.h deleted file mode 100644 index b83cc50..0000000 --- a/riscv/insns/vsstb.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_STORE(RD, store_uint8, RS2); diff --git a/riscv/insns/vsstd.h b/riscv/insns/vsstd.h deleted file mode 100644 index 26868d2..0000000 --- a/riscv/insns/vsstd.h +++ /dev/null @@ -1,3 +0,0 @@ -require_vector; -require_xpr64; -VEC_STORE(RD, store_uint64, RS2); diff --git a/riscv/insns/vssth.h b/riscv/insns/vssth.h deleted file mode 100644 index 3904331..0000000 --- a/riscv/insns/vssth.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_STORE(RD, store_uint16, RS2); diff --git a/riscv/insns/vsstw.h b/riscv/insns/vsstw.h deleted file mode 100644 index 8f05953..0000000 --- a/riscv/insns/vsstw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_STORE(RD, store_uint32, RS2); diff --git a/riscv/insns/vsw.h b/riscv/insns/vsw.h deleted file mode 100644 index 662d4e3..0000000 --- a/riscv/insns/vsw.h +++ /dev/null @@ -1,2 +0,0 @@ -require_vector; -VEC_STORE(RD, store_uint32, 4); diff --git a/riscv/insns/vtcfgivl.h b/riscv/insns/vtcfgivl.h deleted file mode 100644 index e69de29..0000000 diff --git a/riscv/insns/vvcfgivl.h b/riscv/insns/vvcfgivl.h deleted file mode 100644 index 0ded9f8..0000000 --- a/riscv/insns/vvcfgivl.h +++ /dev/null @@ -1,6 +0,0 @@ -require_vector; -nxpr_use = SIMM & 0x3f; -nfpr_use = (SIMM >> 6) & 0x3f; -vcfg(); -setvl(RS1); -RD = VL; diff --git a/riscv/insns/xor.h b/riscv/insns/xor.h deleted file mode 100644 index 49b1783..0000000 --- a/riscv/insns/xor.h +++ /dev/null @@ -1 +0,0 @@ -RD = RS1 ^ RS2; diff --git a/riscv/insns/xori.h b/riscv/insns/xori.h deleted file mode 100644 index 5852aac..0000000 --- a/riscv/insns/xori.h +++ /dev/null @@ -1 +0,0 @@ -RD = SIMM ^ RS1; diff --git a/riscv/mmu.cc b/riscv/mmu.cc deleted file mode 100644 index 7ff937d..0000000 --- a/riscv/mmu.cc +++ /dev/null @@ -1,104 +0,0 @@ -#include "mmu.h" -#include "sim.h" -#include "processor.h" - -mmu_t::mmu_t(char* _mem, size_t _memsz) - : mem(_mem), memsz(_memsz), badvaddr(0), - ptbr(0), supervisor(true), vm_enabled(false), - icsim(NULL), dcsim(NULL), itlbsim(NULL), dtlbsim(NULL) -{ - flush_tlb(); -} - -mmu_t::~mmu_t() -{ -} - -void mmu_t::flush_tlb() -{ - memset(tlb_insn_tag, -1, sizeof(tlb_insn_tag)); - memset(tlb_load_tag, -1, sizeof(tlb_load_tag)); - memset(tlb_store_tag, -1, sizeof(tlb_store_tag)); - flush_icache(); -} - -void mmu_t::flush_icache() -{ - memset(icache_tag, -1, sizeof(icache_tag)); -} - -void* mmu_t::refill(reg_t addr, bool store, bool fetch) -{ - reg_t idx = (addr >> PGSHIFT) % TLB_ENTRIES; - reg_t expected_tag = addr & ~(PGSIZE-1); - - reg_t pte = walk(addr); - - reg_t pte_perm = pte & PTE_PERM; - if(supervisor) // shift supervisor permission bits into user perm bits - pte_perm = (pte_perm >> 3) & PTE_PERM; - pte_perm |= pte & PTE_E; - - reg_t perm = (fetch ? PTE_UX : store ? PTE_UW : PTE_UR) | PTE_E; - if(unlikely((pte_perm & perm) != perm)) - { - badvaddr = addr; - throw store ? trap_store_access_fault - : fetch ? trap_instruction_access_fault - : trap_load_access_fault; - } - - tlb_load_tag[idx] = (pte_perm & PTE_UR) ? expected_tag : -1; - tlb_store_tag[idx] = (pte_perm & PTE_UW) ? expected_tag : -1; - tlb_insn_tag[idx] = (pte_perm & PTE_UX) ? expected_tag : -1; - tlb_data[idx] = (long)(pte >> PTE_PPN_SHIFT << PGSHIFT) + (long)mem; - - return (void*)(((long)addr & (PGSIZE-1)) | tlb_data[idx]); -} - -pte_t mmu_t::walk(reg_t addr) -{ - pte_t pte = 0; - - if(!vm_enabled) - { - if(addr < memsz) - pte = PTE_E | PTE_PERM | ((addr >> PGSHIFT) << PTE_PPN_SHIFT); - } - else - { - reg_t base = ptbr; - reg_t ptd; - - int ptshift = (LEVELS-1)*PTIDXBITS; - for(reg_t i = 0; i < LEVELS; i++, ptshift -= PTIDXBITS) - { - reg_t idx = (addr >> (PGSHIFT+ptshift)) & ((1<= memsz) - break; - - ptd = *(pte_t*)(mem+pte_addr); - if(ptd & PTE_E) - { - // if this PTE is from a larger PT, fake a leaf - // PTE so the TLB will work right - reg_t vpn = addr >> PGSHIFT; - ptd |= (vpn & ((1<<(ptshift))-1)) << PTE_PPN_SHIFT; - - // fault if physical addr is invalid - reg_t ppn = ptd >> PTE_PPN_SHIFT; - if((ppn << PGSHIFT) + (addr & (PGSIZE-1)) < memsz) - pte = ptd; - break; - } - else if(!(ptd & PTE_T)) - break; - - base = (ptd >> PTE_PPN_SHIFT) << PGSHIFT; - } - } - - return pte; -} diff --git a/riscv/mmu.h b/riscv/mmu.h deleted file mode 100644 index e25e90a..0000000 --- a/riscv/mmu.h +++ /dev/null @@ -1,194 +0,0 @@ -#ifndef _RISCV_MMU_H -#define _RISCV_MMU_H - -#include "decode.h" -#include "trap.h" -#include "icsim.h" -#include "common.h" -#include "processor.h" - -class processor_t; - -typedef reg_t pte_t; - -const reg_t LEVELS = 4; -const reg_t PGSHIFT = 12; -const reg_t PGSIZE = 1 << PGSHIFT; -const reg_t PTIDXBITS = PGSHIFT - (sizeof(pte_t) == 8 ? 3 : 2); -const reg_t PPN_BITS = 8*sizeof(reg_t) - PGSHIFT; - -#define PTE_T 0x001 // Entry is a page Table descriptor -#define PTE_E 0x002 // Entry is a page table Entry -#define PTE_R 0x004 // Referenced -#define PTE_D 0x008 // Dirty -#define PTE_UX 0x010 // User eXecute permission -#define PTE_UW 0x020 // User Read permission -#define PTE_UR 0x040 // User Write permission -#define PTE_SX 0x080 // Supervisor eXecute permission -#define PTE_SW 0x100 // Supervisor Read permission -#define PTE_SR 0x200 // Supervisor Write permission -#define PTE_PERM (PTE_SR | PTE_SW | PTE_SX | PTE_UR | PTE_UW | PTE_UX) -#define PTE_PERM_SHIFT 4 -#define PTE_PPN_SHIFT 12 - -class mmu_t -{ -public: - mmu_t(char* _mem, size_t _memsz); - ~mmu_t(); - - #ifdef RISCV_ENABLE_ICSIM - # define dcsim_tick(dcsim, dtlbsim, addr, size, st) \ - do { if(dcsim) (dcsim)->tick(addr, size, st); \ - if(dtlbsim) (dtlbsim)->tick(addr, sizeof(reg_t), false); } while(0) - #else - # define dcsim_tick(dcsim, dtlbsim, addr, size, st) - #endif - - #define load_func(type) \ - type##_t load_##type(reg_t addr) { \ - if(unlikely(addr % sizeof(type##_t))) \ - { \ - badvaddr = addr; \ - throw trap_load_address_misaligned; \ - } \ - void* paddr = translate(addr, false, false); \ - dcsim_tick(dcsim, dtlbsim, paddr-mem, sizeof(type##_t), false); \ - return *(type##_t*)paddr; \ - } - - #define store_func(type) \ - void store_##type(reg_t addr, type##_t val) { \ - if(unlikely(addr % sizeof(type##_t))) \ - { \ - badvaddr = addr; \ - throw trap_store_address_misaligned; \ - } \ - void* paddr = translate(addr, true, false); \ - dcsim_tick(dcsim, dtlbsim, paddr-mem, sizeof(type##_t), true); \ - *(type##_t*)paddr = val; \ - } - - insn_t __attribute__((always_inline)) load_insn(reg_t addr, bool rvc, - insn_func_t* func) - { - insn_t insn; - - #ifdef RISCV_ENABLE_RVC - if(addr % 4 == 2 && rvc) // fetch across word boundary - { - void* addr_lo = translate(addr, false, true); - insn.bits = *(uint16_t*)addr_lo; - - *func = processor_t::dispatch_table - [insn.bits % processor_t::DISPATCH_TABLE_SIZE]; - - if(!INSN_IS_RVC(insn.bits)) - { - void* addr_hi = translate(addr+2, false, true); - insn.bits |= (uint32_t)*(uint16_t*)addr_hi << 16; - } - } - else - #endif - { - reg_t idx = (addr/sizeof(insn_t)) % ICACHE_ENTRIES; - insn_t data = icache_data[idx]; - *func = icache_func[idx]; - if(likely(icache_tag[idx] == addr)) - return data; - - // the processor guarantees alignment based upon rvc mode - void* paddr = translate(addr, false, true); - insn = *(insn_t*)paddr; - - icache_tag[idx] = addr; - icache_data[idx] = insn; - icache_func[idx] = *func = processor_t::dispatch_table - [insn.bits % processor_t::DISPATCH_TABLE_SIZE]; - } - - #ifdef RISCV_ENABLE_ICSIM - if(icsim) - icsim->tick(addr, insn_length(insn.bits), false); - if(itlbsim) - itlbsim->tick(addr, sizeof(reg_t), false); - #endif - - return insn; - } - - load_func(uint8) - load_func(uint16) - load_func(uint32) - load_func(uint64) - - load_func(int8) - load_func(int16) - load_func(int32) - load_func(int64) - - store_func(uint8) - store_func(uint16) - store_func(uint32) - store_func(uint64) - - reg_t get_badvaddr() { return badvaddr; } - reg_t get_ptbr() { return ptbr; } - - void set_supervisor(bool sup) { supervisor = sup; } - void set_vm_enabled(bool en) { vm_enabled = en; } - void set_ptbr(reg_t addr) { ptbr = addr & ~(PGSIZE-1); flush_tlb(); } - - void set_icsim(icsim_t* _icsim) { icsim = _icsim; } - void set_dcsim(icsim_t* _dcsim) { dcsim = _dcsim; } - void set_itlbsim(icsim_t* _itlbsim) { itlbsim = _itlbsim; } - void set_dtlbsim(icsim_t* _dtlbsim) { dtlbsim = _dtlbsim; } - - void flush_tlb(); - void flush_icache(); - -private: - char* mem; - size_t memsz; - reg_t badvaddr; - - reg_t ptbr; - bool supervisor; - bool vm_enabled; - - static const reg_t TLB_ENTRIES = 256; - long tlb_data[TLB_ENTRIES]; - reg_t tlb_insn_tag[TLB_ENTRIES]; - reg_t tlb_load_tag[TLB_ENTRIES]; - reg_t tlb_store_tag[TLB_ENTRIES]; - - static const reg_t ICACHE_ENTRIES = 256; - insn_t icache_data[ICACHE_ENTRIES]; - insn_func_t icache_func[ICACHE_ENTRIES]; - reg_t icache_tag[ICACHE_ENTRIES]; - - icsim_t* icsim; - icsim_t* dcsim; - icsim_t* itlbsim; - icsim_t* dtlbsim; - - void* refill(reg_t addr, bool store, bool fetch); - pte_t walk(reg_t addr); - - void* translate(reg_t addr, bool store, bool fetch) - { - reg_t idx = (addr >> PGSHIFT) % TLB_ENTRIES; - - reg_t* tlb_tag = fetch ? tlb_insn_tag : store ? tlb_store_tag :tlb_load_tag; - reg_t expected_tag = addr & ~(PGSIZE-1); - if(likely(tlb_tag[idx] == expected_tag)) - return (void*)(((long)addr & (PGSIZE-1)) | tlb_data[idx]); - - return refill(addr, store, fetch); - } - - friend class processor_t; -}; - -#endif diff --git a/riscv/opcodes.h b/riscv/opcodes.h deleted file mode 100644 index b37b833..0000000 --- a/riscv/opcodes.h +++ /dev/null @@ -1,272 +0,0 @@ -DECLARE_INSN(movn, 0x6f7, 0x1ffff) -DECLARE_INSN(vfsstw, 0x150f, 0x1ffff) -DECLARE_INSN(remuw, 0x7bb, 0x1ffff) -DECLARE_INSN(fmin_d, 0x180d3, 0x1ffff) -DECLARE_INSN(vlsthu, 0x128b, 0x1ffff) -DECLARE_INSN(c_swsp, 0x8, 0x1f) -DECLARE_INSN(bltu, 0x363, 0x3ff) -DECLARE_INSN(vlsegstwu, 0xb0b, 0xfff) -DECLARE_INSN(movz, 0x2f7, 0x1ffff) -DECLARE_INSN(fcvt_lu_s, 0x9053, 0x3ff1ff) -DECLARE_INSN(fence_l_cv, 0x32f, 0x3ff) -DECLARE_INSN(fmin_s, 0x18053, 0x1ffff) -DECLARE_INSN(c_lw0, 0x12, 0x801f) -DECLARE_INSN(slliw, 0x9b, 0x3f83ff) -DECLARE_INSN(lb, 0x3, 0x3ff) -DECLARE_INSN(vlwu, 0x30b, 0x3fffff) -DECLARE_INSN(fcvt_d_l, 0xc0d3, 0x3ff1ff) -DECLARE_INSN(lh, 0x83, 0x3ff) -DECLARE_INSN(fcvt_d_w, 0xe0d3, 0x3ff1ff) -DECLARE_INSN(lw, 0x103, 0x3ff) -DECLARE_INSN(add, 0x33, 0x1ffff) -DECLARE_INSN(fcvt_d_s, 0x100d3, 0x3ff1ff) -DECLARE_INSN(fence_g_v, 0x2af, 0x3ff) -DECLARE_INSN(mfpcr, 0x17b, 0x7c1ffff) -DECLARE_INSN(c_fsd, 0x18, 0x1f) -DECLARE_INSN(fmax_d, 0x190d3, 0x1ffff) -DECLARE_INSN(bne, 0xe3, 0x3ff) -DECLARE_INSN(rdcycle, 0x277, 0x7ffffff) -DECLARE_INSN(fcvt_s_d, 0x11053, 0x3ff1ff) -DECLARE_INSN(vlh, 0x8b, 0x3fffff) -DECLARE_INSN(bgeu, 0x3e3, 0x3ff) -DECLARE_INSN(vflstd, 0x158b, 0x1ffff) -DECLARE_INSN(c_li, 0x0, 0x1f) -DECLARE_INSN(di, 0xfb, 0x7ffffff) -DECLARE_INSN(sltiu, 0x193, 0x3ff) -DECLARE_INSN(mtpcr, 0x1fb, 0xf801ffff) -DECLARE_INSN(vlb, 0xb, 0x3fffff) -DECLARE_INSN(stop, 0x177, 0xffffffff) -DECLARE_INSN(vld, 0x18b, 0x3fffff) -DECLARE_INSN(c_slli, 0x19, 0x1c1f) -DECLARE_INSN(break, 0xf7, 0xffffffff) -DECLARE_INSN(cflush, 0x2fb, 0xffffffff) -DECLARE_INSN(fcvt_s_w, 0xe053, 0x3ff1ff) -DECLARE_INSN(vflstw, 0x150b, 0x1ffff) -DECLARE_INSN(mul, 0x433, 0x1ffff) -DECLARE_INSN(c_lw, 0xa, 0x1f) -DECLARE_INSN(vlw, 0x10b, 0x3fffff) -DECLARE_INSN(vssegstw, 0x90f, 0xfff) -DECLARE_INSN(amominu_d, 0x19ab, 0x1ffff) -DECLARE_INSN(c_sdsp, 0x6, 0x1f) -DECLARE_INSN(utidx, 0x1f7, 0x7ffffff) -DECLARE_INSN(srli, 0x293, 0x3f03ff) -DECLARE_INSN(c_srli, 0x819, 0x1c1f) -DECLARE_INSN(c_ldsp, 0x4, 0x1f) -DECLARE_INSN(c_flw, 0x14, 0x1f) -DECLARE_INSN(c_srai32, 0x1419, 0x1c1f) -DECLARE_INSN(amominu_w, 0x192b, 0x1ffff) -DECLARE_INSN(divuw, 0x6bb, 0x1ffff) -DECLARE_INSN(mulw, 0x43b, 0x1ffff) -DECLARE_INSN(vssegstd, 0x98f, 0xfff) -DECLARE_INSN(srlw, 0x2bb, 0x1ffff) -DECLARE_INSN(vssegstb, 0x80f, 0xfff) -DECLARE_INSN(mftx_d, 0x1c0d3, 0x7c1ffff) -DECLARE_INSN(div, 0x633, 0x1ffff) -DECLARE_INSN(c_ld, 0x9, 0x1f) -DECLARE_INSN(mftx_s, 0x1c053, 0x7c1ffff) -DECLARE_INSN(vssegsth, 0x88f, 0xfff) -DECLARE_INSN(vvcfgivl, 0xf3, 0x3ff) -DECLARE_INSN(j, 0x67, 0x7f) -DECLARE_INSN(ei, 0x7b, 0x7ffffff) -DECLARE_INSN(fence, 0x12f, 0x3ff) -DECLARE_INSN(vsw, 0x10f, 0x3fffff) -DECLARE_INSN(fnmsub_s, 0x4b, 0x1ff) -DECLARE_INSN(vfssegstd, 0xd8f, 0xfff) -DECLARE_INSN(fcvt_l_s, 0x8053, 0x3ff1ff) -DECLARE_INSN(fle_s, 0x17053, 0x1ffff) -DECLARE_INSN(vsb, 0xf, 0x3fffff) -DECLARE_INSN(mffsr, 0x1d053, 0x7ffffff) -DECLARE_INSN(fdiv_s, 0x3053, 0x1f1ff) -DECLARE_INSN(vlstbu, 0x120b, 0x1ffff) -DECLARE_INSN(vsetvl, 0x2f3, 0x3fffff) -DECLARE_INSN(fle_d, 0x170d3, 0x1ffff) -DECLARE_INSN(fence_i, 0xaf, 0x3ff) -DECLARE_INSN(vlsegbu, 0x220b, 0x1ffff) -DECLARE_INSN(fnmsub_d, 0xcb, 0x1ff) -DECLARE_INSN(addw, 0x3b, 0x1ffff) -DECLARE_INSN(sll, 0xb3, 0x1ffff) -DECLARE_INSN(xor, 0x233, 0x1ffff) -DECLARE_INSN(sub, 0x10033, 0x1ffff) -DECLARE_INSN(eret, 0x27b, 0xffffffff) -DECLARE_INSN(blt, 0x263, 0x3ff) -DECLARE_INSN(vsstw, 0x110f, 0x1ffff) -DECLARE_INSN(mtfsr, 0x1f053, 0x3fffff) -DECLARE_INSN(vssth, 0x108f, 0x1ffff) -DECLARE_INSN(rem, 0x733, 0x1ffff) -DECLARE_INSN(srliw, 0x29b, 0x3f83ff) -DECLARE_INSN(lui, 0x37, 0x7f) -DECLARE_INSN(vsstb, 0x100f, 0x1ffff) -DECLARE_INSN(fcvt_s_lu, 0xd053, 0x3ff1ff) -DECLARE_INSN(vsstd, 0x118f, 0x1ffff) -DECLARE_INSN(addi, 0x13, 0x3ff) -DECLARE_INSN(vfmst, 0x1173, 0x1ffff) -DECLARE_INSN(mulh, 0x4b3, 0x1ffff) -DECLARE_INSN(fmul_s, 0x2053, 0x1f1ff) -DECLARE_INSN(vlsegsthu, 0xa8b, 0xfff) -DECLARE_INSN(srai, 0x10293, 0x3f03ff) -DECLARE_INSN(amoand_d, 0x9ab, 0x1ffff) -DECLARE_INSN(flt_d, 0x160d3, 0x1ffff) -DECLARE_INSN(sraw, 0x102bb, 0x1ffff) -DECLARE_INSN(fmul_d, 0x20d3, 0x1f1ff) -DECLARE_INSN(ld, 0x183, 0x3ff) -DECLARE_INSN(ori, 0x313, 0x3ff) -DECLARE_INSN(flt_s, 0x16053, 0x1ffff) -DECLARE_INSN(addiw, 0x1b, 0x3ff) -DECLARE_INSN(amoand_w, 0x92b, 0x1ffff) -DECLARE_INSN(feq_s, 0x15053, 0x1ffff) -DECLARE_INSN(fsgnjx_d, 0x70d3, 0x1ffff) -DECLARE_INSN(sra, 0x102b3, 0x1ffff) -DECLARE_INSN(c_lwsp, 0x5, 0x1f) -DECLARE_INSN(bge, 0x2e3, 0x3ff) -DECLARE_INSN(c_add3, 0x1c, 0x31f) -DECLARE_INSN(sraiw, 0x1029b, 0x3f83ff) -DECLARE_INSN(vssegd, 0x218f, 0x1ffff) -DECLARE_INSN(srl, 0x2b3, 0x1ffff) -DECLARE_INSN(vfmts, 0x1973, 0x1ffff) -DECLARE_INSN(fsgnjx_s, 0x7053, 0x1ffff) -DECLARE_INSN(vfmsv, 0x973, 0x3fffff) -DECLARE_INSN(feq_d, 0x150d3, 0x1ffff) -DECLARE_INSN(fcvt_d_wu, 0xf0d3, 0x3ff1ff) -DECLARE_INSN(vmts, 0x1873, 0x1ffff) -DECLARE_INSN(or, 0x333, 0x1ffff) -DECLARE_INSN(rdinstret, 0xa77, 0x7ffffff) -DECLARE_INSN(fcvt_wu_d, 0xb0d3, 0x3ff1ff) -DECLARE_INSN(subw, 0x1003b, 0x1ffff) -DECLARE_INSN(jalr_c, 0x6b, 0x3ff) -DECLARE_INSN(fmax_s, 0x19053, 0x1ffff) -DECLARE_INSN(amomaxu_d, 0x1dab, 0x1ffff) -DECLARE_INSN(c_slliw, 0x1819, 0x1c1f) -DECLARE_INSN(jalr_j, 0x16b, 0x3ff) -DECLARE_INSN(c_fld, 0x15, 0x1f) -DECLARE_INSN(vlstw, 0x110b, 0x1ffff) -DECLARE_INSN(vlsth, 0x108b, 0x1ffff) -DECLARE_INSN(xori, 0x213, 0x3ff) -DECLARE_INSN(jalr_r, 0xeb, 0x3ff) -DECLARE_INSN(amomaxu_w, 0x1d2b, 0x1ffff) -DECLARE_INSN(fcvt_wu_s, 0xb053, 0x3ff1ff) -DECLARE_INSN(vlstb, 0x100b, 0x1ffff) -DECLARE_INSN(vlstd, 0x118b, 0x1ffff) -DECLARE_INSN(c_ld0, 0x8012, 0x801f) -DECLARE_INSN(rdtime, 0x677, 0x7ffffff) -DECLARE_INSN(andi, 0x393, 0x3ff) -DECLARE_INSN(c_srli32, 0xc19, 0x1c1f) -DECLARE_INSN(fsgnjn_d, 0x60d3, 0x1ffff) -DECLARE_INSN(fnmadd_s, 0x4f, 0x1ff) -DECLARE_INSN(jal, 0x6f, 0x7f) -DECLARE_INSN(lwu, 0x303, 0x3ff) -DECLARE_INSN(vlsegstbu, 0xa0b, 0xfff) -DECLARE_INSN(c_beq, 0x10, 0x1f) -DECLARE_INSN(vlhu, 0x28b, 0x3fffff) -DECLARE_INSN(vfsstd, 0x158f, 0x1ffff) -DECLARE_INSN(c_bne, 0x11, 0x1f) -DECLARE_INSN(fnmadd_d, 0xcf, 0x1ff) -DECLARE_INSN(fence_g_cv, 0x3af, 0x3ff) -DECLARE_INSN(amoadd_d, 0x1ab, 0x1ffff) -DECLARE_INSN(c_sw, 0xd, 0x1f) -DECLARE_INSN(amomax_w, 0x152b, 0x1ffff) -DECLARE_INSN(c_move, 0x2, 0x801f) -DECLARE_INSN(fmovn, 0xef7, 0x1ffff) -DECLARE_INSN(c_fsw, 0x16, 0x1f) -DECLARE_INSN(c_j, 0x8002, 0x801f) -DECLARE_INSN(mulhsu, 0x533, 0x1ffff) -DECLARE_INSN(c_sd, 0xc, 0x1f) -DECLARE_INSN(amoadd_w, 0x12b, 0x1ffff) -DECLARE_INSN(fcvt_d_lu, 0xd0d3, 0x3ff1ff) -DECLARE_INSN(amomax_d, 0x15ab, 0x1ffff) -DECLARE_INSN(fcvt_w_d, 0xa0d3, 0x3ff1ff) -DECLARE_INSN(fmovz, 0xaf7, 0x1ffff) -DECLARE_INSN(c_or3, 0x21c, 0x31f) -DECLARE_INSN(vmvv, 0x73, 0x3fffff) -DECLARE_INSN(vfssegstw, 0xd0f, 0xfff) -DECLARE_INSN(slt, 0x133, 0x1ffff) -DECLARE_INSN(mxtf_d, 0x1e0d3, 0x3fffff) -DECLARE_INSN(sllw, 0xbb, 0x1ffff) -DECLARE_INSN(amoor_d, 0xdab, 0x1ffff) -DECLARE_INSN(slti, 0x113, 0x3ff) -DECLARE_INSN(remu, 0x7b3, 0x1ffff) -DECLARE_INSN(flw, 0x107, 0x3ff) -DECLARE_INSN(remw, 0x73b, 0x1ffff) -DECLARE_INSN(sltu, 0x1b3, 0x1ffff) -DECLARE_INSN(slli, 0x93, 0x3f03ff) -DECLARE_INSN(c_and3, 0x31c, 0x31f) -DECLARE_INSN(vssegw, 0x210f, 0x1ffff) -DECLARE_INSN(amoor_w, 0xd2b, 0x1ffff) -DECLARE_INSN(vsd, 0x18f, 0x3fffff) -DECLARE_INSN(beq, 0x63, 0x3ff) -DECLARE_INSN(fld, 0x187, 0x3ff) -DECLARE_INSN(mxtf_s, 0x1e053, 0x3fffff) -DECLARE_INSN(fsub_s, 0x1053, 0x1f1ff) -DECLARE_INSN(and, 0x3b3, 0x1ffff) -DECLARE_INSN(vtcfgivl, 0x1f3, 0x3ff) -DECLARE_INSN(lbu, 0x203, 0x3ff) -DECLARE_INSN(vf, 0x3f3, 0xf80003ff) -DECLARE_INSN(vlsegstw, 0x90b, 0xfff) -DECLARE_INSN(syscall, 0x77, 0xffffffff) -DECLARE_INSN(fsgnj_s, 0x5053, 0x1ffff) -DECLARE_INSN(c_addi, 0x1, 0x1f) -DECLARE_INSN(vfmvv, 0x173, 0x3fffff) -DECLARE_INSN(vlstwu, 0x130b, 0x1ffff) -DECLARE_INSN(c_sub3, 0x11c, 0x31f) -DECLARE_INSN(vsh, 0x8f, 0x3fffff) -DECLARE_INSN(vlsegstb, 0x80b, 0xfff) -DECLARE_INSN(vlsegstd, 0x98b, 0xfff) -DECLARE_INSN(vflsegd, 0x258b, 0x1ffff) -DECLARE_INSN(vflsegw, 0x250b, 0x1ffff) -DECLARE_INSN(vlsegsth, 0x88b, 0xfff) -DECLARE_INSN(fsgnj_d, 0x50d3, 0x1ffff) -DECLARE_INSN(vflsegstw, 0xd0b, 0xfff) -DECLARE_INSN(c_sub, 0x801a, 0x801f) -DECLARE_INSN(mulhu, 0x5b3, 0x1ffff) -DECLARE_INSN(fcvt_l_d, 0x80d3, 0x3ff1ff) -DECLARE_INSN(vmsv, 0x873, 0x3fffff) -DECLARE_INSN(vmst, 0x1073, 0x1ffff) -DECLARE_INSN(fadd_d, 0xd3, 0x1f1ff) -DECLARE_INSN(fcvt_s_wu, 0xf053, 0x3ff1ff) -DECLARE_INSN(rdnpc, 0x26b, 0x7ffffff) -DECLARE_INSN(fcvt_s_l, 0xc053, 0x3ff1ff) -DECLARE_INSN(vflsegstd, 0xd8b, 0xfff) -DECLARE_INSN(c_add, 0x1a, 0x801f) -DECLARE_INSN(fcvt_lu_d, 0x90d3, 0x3ff1ff) -DECLARE_INSN(vfld, 0x58b, 0x3fffff) -DECLARE_INSN(fsub_d, 0x10d3, 0x1f1ff) -DECLARE_INSN(fmadd_s, 0x43, 0x1ff) -DECLARE_INSN(fcvt_w_s, 0xa053, 0x3ff1ff) -DECLARE_INSN(vssegh, 0x208f, 0x1ffff) -DECLARE_INSN(fsqrt_s, 0x4053, 0x3ff1ff) -DECLARE_INSN(c_srai, 0x1019, 0x1c1f) -DECLARE_INSN(amomin_w, 0x112b, 0x1ffff) -DECLARE_INSN(fsgnjn_s, 0x6053, 0x1ffff) -DECLARE_INSN(c_slli32, 0x419, 0x1c1f) -DECLARE_INSN(vlsegwu, 0x230b, 0x1ffff) -DECLARE_INSN(vfsw, 0x50f, 0x3fffff) -DECLARE_INSN(amoswap_d, 0x5ab, 0x1ffff) -DECLARE_INSN(fence_l_v, 0x22f, 0x3ff) -DECLARE_INSN(fsqrt_d, 0x40d3, 0x3ff1ff) -DECLARE_INSN(vflw, 0x50b, 0x3fffff) -DECLARE_INSN(fdiv_d, 0x30d3, 0x1f1ff) -DECLARE_INSN(fmadd_d, 0xc3, 0x1ff) -DECLARE_INSN(divw, 0x63b, 0x1ffff) -DECLARE_INSN(amomin_d, 0x11ab, 0x1ffff) -DECLARE_INSN(divu, 0x6b3, 0x1ffff) -DECLARE_INSN(amoswap_w, 0x52b, 0x1ffff) -DECLARE_INSN(vfsd, 0x58f, 0x3fffff) -DECLARE_INSN(fadd_s, 0x53, 0x1f1ff) -DECLARE_INSN(vlsegb, 0x200b, 0x1ffff) -DECLARE_INSN(fsd, 0x1a7, 0x3ff) -DECLARE_INSN(vlsegd, 0x218b, 0x1ffff) -DECLARE_INSN(vlsegh, 0x208b, 0x1ffff) -DECLARE_INSN(sw, 0x123, 0x3ff) -DECLARE_INSN(fmsub_s, 0x47, 0x1ff) -DECLARE_INSN(vfssegw, 0x250f, 0x1ffff) -DECLARE_INSN(c_addiw, 0x1d, 0x1f) -DECLARE_INSN(lhu, 0x283, 0x3ff) -DECLARE_INSN(sh, 0xa3, 0x3ff) -DECLARE_INSN(vlsegw, 0x210b, 0x1ffff) -DECLARE_INSN(fsw, 0x127, 0x3ff) -DECLARE_INSN(vlbu, 0x20b, 0x3fffff) -DECLARE_INSN(sb, 0x23, 0x3ff) -DECLARE_INSN(fmsub_d, 0xc7, 0x1ff) -DECLARE_INSN(vlseghu, 0x228b, 0x1ffff) -DECLARE_INSN(vssegb, 0x200f, 0x1ffff) -DECLARE_INSN(vfssegd, 0x258f, 0x1ffff) -DECLARE_INSN(sd, 0x1a3, 0x3ff) diff --git a/riscv/processor.cc b/riscv/processor.cc deleted file mode 100644 index e86536e..0000000 --- a/riscv/processor.cc +++ /dev/null @@ -1,273 +0,0 @@ -#include "processor.h" -#include -#include -#include -#include -#include -#include "common.h" -#include "config.h" -#include "sim.h" -#include "icsim.h" - -processor_t::processor_t(sim_t* _sim, mmu_t* _mmu) - : sim(_sim), mmu(*_mmu) -{ - // a few assumptions about endianness, including freg_t union - static_assert(BYTE_ORDER == LITTLE_ENDIAN); - static_assert(sizeof(freg_t) == 8); - static_assert(sizeof(reg_t) == 8); - - static_assert(sizeof(insn_t) == 4); - static_assert(sizeof(uint128_t) == 16 && sizeof(int128_t) == 16); - - icsim = NULL; - dcsim = NULL; - itlbsim = NULL; - dtlbsim = NULL; - - reset(); -} - -processor_t::~processor_t() -{ - if(icsim) - icsim->print_stats(); - delete icsim; - - if(itlbsim) - itlbsim->print_stats(); - delete itlbsim; - - if(dcsim) - dcsim->print_stats(); - delete dcsim; - - if(dtlbsim) - dtlbsim->print_stats(); - delete dtlbsim; -} - -void processor_t::init(uint32_t _id, icsim_t* default_icache, - icsim_t* default_dcache) -{ - id = _id; - - for (int i=0; iid = id; - uts[i]->set_sr(uts[i]->sr | SR_EF); - uts[i]->set_sr(uts[i]->sr | SR_EV); - uts[i]->utidx = i; - } - - #ifdef RISCV_ENABLE_ICSIM - icsim = new icsim_t(*default_icache); - mmu.set_icsim(icsim); - itlbsim = new icsim_t(1, 8, 4096, "ITLB"); - mmu.set_itlbsim(itlbsim); - #endif - #ifdef RISCV_ENABLE_ICSIM - dcsim = new icsim_t(*default_dcache); - mmu.set_dcsim(dcsim); - dtlbsim = new icsim_t(1, 8, 4096, "DTLB"); - mmu.set_dtlbsim(dtlbsim); - #endif -} - -void processor_t::reset() -{ - run = false; - - memset(XPR,0,sizeof(XPR)); - memset(FPR,0,sizeof(FPR)); - - pc = 0; - evec = 0; - epc = 0; - badvaddr = 0; - cause = 0; - pcr_k0 = 0; - pcr_k1 = 0; - tohost = 0; - fromhost = 0; - count = 0; - compare = 0; - cycle = 0; - set_sr(SR_S | SR_SX); // SX ignored if 64b mode not supported - set_fsr(0); - - // vector stuff - vecbanks = 0xff; - vecbanks_count = 8; - utidx = -1; - vlmax = 32; - vl = 0; - nxfpr_bank = 256; - nxpr_use = 32; - nfpr_use = 32; - for (int i=0; i> CAUSE_IP_SHIFT; - interrupts &= (sr & SR_IM) >> SR_IM_SHIFT; - - if(interrupts && (sr & SR_ET)) - throw trap_interrupt; -} - -void processor_t::step(size_t n, bool noisy) -{ - if(!run) - return; - - size_t i = 0; - while(1) try - { - take_interrupt(); - - mmu_t& _mmu = mmu; - insn_t insn; - insn_func_t func; - reg_t npc = pc; - #define execute_insn(noisy) \ - do { \ - insn = _mmu.load_insn(npc, sr & SR_EC, &func); \ - if(noisy) disasm(insn,pc); \ - npc = func(this, insn, npc); \ - pc = npc; \ - } while(0) - - if(noisy) for( ; i < n; i++) - execute_insn(true); - else - { - for( ; n > 3 && i < n-3; i+=4) - { - execute_insn(false); - execute_insn(false); - execute_insn(false); - execute_insn(false); - } - for( ; i < n; i++) - execute_insn(false); - } - - break; - } - catch(trap_t t) - { - i++; - take_trap(t,noisy); - } - catch(vt_command_t cmd) - { - i++; - if (cmd == vt_command_stop) - break; - } - catch(halt_t t) - { - reset(); - return; - } - - cycle += i; - - typeof(count) old_count = count; - typeof(count) max_count = -1; - count += i; - if(old_count < compare && (count >= compare || old_count > max_count-i)) - cause |= 1 << (TIMER_IRQ+CAUSE_IP_SHIFT); -} - -void processor_t::take_trap(trap_t t, bool noisy) -{ - demand(t < NUM_TRAPS, "internal error: bad trap number %d", int(t)); - demand(sr & SR_ET, "error mode on core %d!\ntrap %s, pc 0x%016llx", - id, trap_name(t), (unsigned long long)pc); - if(noisy) - printf("core %3d: trap %s, pc 0x%016llx\n", - id, trap_name(t), (unsigned long long)pc); - - set_sr((((sr & ~SR_ET) | SR_S) & ~SR_PS) | ((sr & SR_S) ? SR_PS : 0)); - cause = (cause & ~CAUSE_EXCCODE) | (t << CAUSE_EXCCODE_SHIFT); - epc = pc; - pc = evec; - badvaddr = mmu.get_badvaddr(); -} - -void processor_t::deliver_ipi() -{ - cause |= 1 << (IPI_IRQ+CAUSE_IP_SHIFT); - run = true; -} - -void processor_t::disasm(insn_t insn, reg_t pc) -{ - printf("core %3d: 0x%016llx (0x%08x) ",id,(unsigned long long)pc,insn.bits); - - #ifdef RISCV_HAVE_LIBOPCODES - disassemble_info info; - INIT_DISASSEMBLE_INFO(info, stdout, fprintf); - info.flavour = bfd_target_unknown_flavour; - info.arch = bfd_arch_mips; - info.mach = 101; // XXX bfd_mach_mips_riscv requires modified bfd.h - info.endian = BFD_ENDIAN_LITTLE; - info.buffer = (bfd_byte*)&insn; - info.buffer_length = sizeof(insn); - info.buffer_vma = pc; - - int ret = print_insn_little_mips(pc, &info); - demand(ret == insn_length(insn.bits), "disasm bug!"); - #else - printf("unknown"); - #endif - printf("\n"); -} diff --git a/riscv/processor.h b/riscv/processor.h deleted file mode 100644 index 8b2d2bc..0000000 --- a/riscv/processor.h +++ /dev/null @@ -1,97 +0,0 @@ -#ifndef _RISCV_PROCESSOR_H -#define _RISCV_PROCESSOR_H - -#include "decode.h" -#include -#include "trap.h" -#include "icsim.h" - -#define MAX_UTS 2048 - -class processor_t; -class mmu_t; -typedef reg_t (*insn_func_t)(processor_t*, insn_t, reg_t); -class sim_t; - -class processor_t -{ -public: - processor_t(sim_t* _sim, mmu_t* _mmu); - ~processor_t(); - void init(uint32_t _id, icsim_t* defualt_icache, icsim_t* default_dcache); - void step(size_t n, bool noisy); - void deliver_ipi(); - -private: - sim_t* sim; - - // architected state - reg_t XPR[NXPR]; - freg_t FPR[NFPR]; - - // privileged control registers - reg_t pc; - reg_t epc; - reg_t badvaddr; - reg_t cause; - reg_t evec; - reg_t tohost; - reg_t fromhost; - reg_t pcr_k0; - reg_t pcr_k1; - uint32_t id; - uint32_t sr; - uint32_t count; - uint32_t compare; - - bool run; - - // unprivileged control registers - uint32_t fsr; - - // # of bits in an XPR (32 or 64). (redundant with sr) - int xprlen; - - // shared memory - mmu_t& mmu; - - // counters - reg_t cycle; - - // functions - void reset(); - void take_interrupt(); - void set_sr(uint32_t val); - void set_fsr(uint32_t val); - void take_trap(trap_t t, bool noisy); - void disasm(insn_t insn, reg_t pc); - - // vector stuff - void vcfg(); - void setvl(int vlapp); - - reg_t vecbanks; - uint32_t vecbanks_count; - - bool utmode; - int utidx; - int vlmax; - int vl; - int nxfpr_bank; - int nxpr_use; - int nfpr_use; - processor_t* uts[MAX_UTS]; - - // cache sim - icsim_t* icsim; - icsim_t* dcsim; - icsim_t* itlbsim; - icsim_t* dtlbsim; - - friend class sim_t; - friend class mmu_t; - - #include "dispatch.h" -}; - -#endif diff --git a/riscv/riscv-isa-run.cc b/riscv/riscv-isa-run.cc deleted file mode 100644 index bd3b102..0000000 --- a/riscv/riscv-isa-run.cc +++ /dev/null @@ -1,63 +0,0 @@ -#include -#include -#include "common.h" -#include "sim.h" -#include "applink.h" - -int main(int argc, char** argv) -{ - bool debug = false; - int nprocs = 1; - int fromhost_fd = -1, tohost_fd = -1; - size_t icsim_sets = 1024, icsim_linesz = 32, icsim_ways = 1; - - for(int c; (c = getopt(argc,argv,"dp:f:t:i:")) != -1; ) - { - switch(c) - { - case 'd': - debug = true; - break; - case 'p': - nprocs = atoi(optarg); - break; - case 'f': - fromhost_fd = atoi(optarg); - break; - case 't': - tohost_fd = atoi(optarg); - break; - case 'i': - switch(optarg[0]) - { - case 's': - icsim_sets = atoi(optarg+1); - break; - case 'l': - icsim_linesz = atoi(optarg+1); - break; - case 'a': - icsim_ways = atoi(optarg+1); - break; - } - break; - } - } - - demand(fcntl(fromhost_fd,F_GETFD) >= 0, "fromhost file not open"); - demand(fcntl(tohost_fd,F_GETFD) >= 0, "tohost file not open"); - - icsim_t icache(icsim_sets, icsim_ways, icsim_linesz, "I$"); - icsim_t dcache(512, 2, 32, "D$"); - - appserver_link_t applink(tohost_fd, fromhost_fd); - - sim_t s(nprocs, &applink, &icache, &dcache); - try - { - s.run(debug); - } - catch(quit_sim&) - { - } -} diff --git a/riscv/riscv.ac b/riscv/riscv.ac deleted file mode 100644 index 00358fd..0000000 --- a/riscv/riscv.ac +++ /dev/null @@ -1,37 +0,0 @@ -AC_ARG_ENABLE([fpu], AS_HELP_STRING([--disable-fpu], [Disable floating-point])) -AS_IF([test "x$enable_fpu" != "xno"], [ - AC_DEFINE([RISCV_ENABLE_FPU],,[Define if floating-point instructions are supported]) -]) - -AC_ARG_ENABLE([64bit], AS_HELP_STRING([--disable-64bit], [Disable 64-bit mode])) -AS_IF([test "x$enable_64bit" != "xno"], [ - AC_DEFINE([RISCV_ENABLE_64BIT],,[Define if 64-bit mode is supported]) -]) - -AC_ARG_ENABLE([rvc], AS_HELP_STRING([--enable-rvc], [Enable instruction compression])) -AS_IF([test "x$enable_rvc" = "xyes"], [ - AC_DEFINE([RISCV_ENABLE_RVC],,[Define if instruction compression is supported]) -]) - -AC_ARG_ENABLE([vec], AS_HELP_STRING([--disable-vec], [Disable vector processor])) -AS_IF([test "x$enable_vec" != "xno"], [ - AC_DEFINE([RISCV_ENABLE_VEC],,[Define if vector processor is supported]) -]) - -AC_ARG_ENABLE([icsim], AS_HELP_STRING([--enable-icsim], [Enable instruction cache simulator])) -AS_IF([test "x$enable_icsim" = "xyes"], [ - AC_DEFINE([RISCV_ENABLE_ICSIM],,[Define if instruction cache simulator is enabled]) -]) - -libopc=`dirname \`which riscv-gcc\``/../`$ac_config_guess`/riscv/lib/libopcodes.a -AC_CHECK_FILES([$libopc],[have_libopcodes="yes"],[have_libopcodes="no"]) - -AC_SEARCH_LIBS([bfd_init],[bfd],[],[have_libopcodes="no"]) - -AS_IF([test "$have_libopcodes" = "no"],[ - AC_MSG_WARN([Could not find opcodes library]) - AC_MSG_WARN([Build will not include disassembly support]) -],[ - LIBS="$libopc $LIBS" - AC_DEFINE([RISCV_HAVE_LIBOPCODES],,[Define if libopcodes exists]) -]) diff --git a/riscv/riscv.mk.in b/riscv/riscv.mk.in deleted file mode 100644 index f075f47..0000000 --- a/riscv/riscv.mk.in +++ /dev/null @@ -1,60 +0,0 @@ -riscv_subproject_deps = \ - softfloat_riscv \ - softfloat \ - -riscv_insn_hdrs := $(notdir $(wildcard $(src_dir)/riscv/insns/*.h)) - -riscv_hdrs = \ - applink.h \ - common.h \ - decode.h \ - mmu.h \ - processor.h \ - sim.h \ - trap.h \ - opcodes.h \ - insn_header.h \ - insn_footer.h \ - dispatch.h \ - -NDISPATCH := 10 -DISPATCH_SRCS := \ - dispatch0.cc \ - dispatch1.cc \ - dispatch2.cc \ - dispatch3.cc \ - dispatch4.cc \ - dispatch5.cc \ - dispatch6.cc \ - dispatch7.cc \ - dispatch8.cc \ - dispatch9.cc \ - dispatch10.cc \ - -$(DISPATCH_SRCS): %.cc: dispatch $(wildcard insns/*.h) $(riscv_hdrs) - $< $(subst dispatch,,$(subst .cc,,$@)) $(NDISPATCH) 1024 < $(src_dir)/riscv/opcodes.h > $@ - -$(src_dir)/riscv/dispatch.h: %.h: dispatch - $< $(NDISPATCH) 1024 < $(src_dir)/riscv/opcodes.h > $@ - -$(patsubst %.h, %.cc, $(riscv_insn_hdrs)): %.cc: insns/%.h $(riscv_hdrs) - @echo \#define FUNC insn_func_$(@:.cc=) > $@ - @echo \#define OPCODE_MASK MASK_$(@:.cc=) >> $@ - @echo \#define OPCODE_MATCH MATCH_$(@:.cc=) >> $@ - @cat $(src_dir)/riscv/insn_header.h >> $@ - @cat $< >> $@ - @cat $(src_dir)/riscv/insn_footer.h >> $@ - -riscv_srcs = \ - applink.cc \ - processor.cc \ - sim.cc \ - trap.cc \ - icsim.cc \ - mmu.cc \ - $(DISPATCH_SRCS) \ - -riscv_test_srcs = - -riscv_install_prog_srcs = \ - riscv-isa-run.cc \ diff --git a/riscv/sim.cc b/riscv/sim.cc deleted file mode 100644 index 9b2677c..0000000 --- a/riscv/sim.cc +++ /dev/null @@ -1,351 +0,0 @@ -#include "sim.h" -#include "applink.h" -#include "common.h" -#include -#include -#include -#include -#include - -sim_t::sim_t(int _nprocs, appserver_link_t* _applink, icsim_t* default_icache, icsim_t* default_dcache) - : applink(_applink), - procs(_nprocs) -{ - size_t memsz0 = sizeof(size_t) == 8 ? 0x100000000ULL : 0x70000000UL; - size_t quantum = std::max(PGSIZE, (reg_t)sysconf(_SC_PAGESIZE)); - memsz0 = memsz0/quantum*quantum; - - memsz = memsz0; - mem = (char*)mmap64(NULL, memsz, PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0); - - if(mem == MAP_FAILED) - { - while(mem == MAP_FAILED && (memsz = memsz*10/11/quantum*quantum)) - mem = (char*)mmap64(NULL, memsz, PROT_WRITE, MAP_PRIVATE|MAP_ANON, -1, 0); - assert(mem != MAP_FAILED); - fprintf(stderr, "warning: only got %lu bytes of target mem (wanted %lu)\n", - (unsigned long)memsz, (unsigned long)memsz0); - } - - mmu = new mmu_t(mem, memsz); - - for(size_t i = 0; i < num_cores(); i++) - { - procs[i] = new processor_t(this, new mmu_t(mem, memsz)); - procs[i]->init(i, default_icache, default_dcache); - } - - applink->init(this); -} - -sim_t::~sim_t() -{ - for(size_t i = 0; i < num_cores(); i++) - { - mmu_t* pmmu = &procs[i]->mmu; - delete procs[i]; - delete pmmu; - } - delete mmu; - munmap(mem, memsz); -} - -void sim_t::set_tohost(reg_t val) -{ - fromhost = 0; - tohost = val; - applink->wait_for_tohost(); -} - -reg_t sim_t::get_fromhost() -{ - applink->wait_for_fromhost(); - return fromhost; -} - -void sim_t::send_ipi(reg_t who) -{ - if(who < num_cores()) - procs[who]->deliver_ipi(); -} - -void sim_t::run(bool debug) -{ - applink->wait_for_start(); - - // start core 0 - send_ipi(0); - - while(1) - { - if(!debug) - step_all(100,100,false); - else - { - putchar(':'); - char s[128]; - std::cin.getline(s,sizeof(s)-1); - - char* p = strtok(s," "); - if(!p) - { - interactive_run_noisy(std::string("r"), std::vector(1,"1")); - continue; - } - std::string cmd = p; - - std::vector args; - while((p = strtok(NULL," "))) - args.push_back(p); - - - typedef void (sim_t::*interactive_func)(const std::string&, const std::vector&); - std::map funcs; - - funcs["r"] = &sim_t::interactive_run_noisy; - funcs["rs"] = &sim_t::interactive_run_silent; - funcs["rp"] = &sim_t::interactive_run_proc_noisy; - funcs["rps"] = &sim_t::interactive_run_proc_silent; - funcs["reg"] = &sim_t::interactive_reg; - funcs["fregs"] = &sim_t::interactive_fregs; - funcs["fregd"] = &sim_t::interactive_fregd; - funcs["mem"] = &sim_t::interactive_mem; - funcs["str"] = &sim_t::interactive_str; - funcs["until"] = &sim_t::interactive_until; - funcs["while"] = &sim_t::interactive_until; - funcs["q"] = &sim_t::interactive_quit; - - try - { - if(funcs.count(cmd)) - (this->*funcs[cmd])(cmd, args); - } - catch(trap_t t) {} - } - } -} - -void sim_t::step_all(size_t n, size_t interleave, bool noisy) -{ - for(size_t j = 0; j < n; j+=interleave) - for(int i = 0; i < (int)num_cores(); i++) - procs[i]->step(interleave,noisy); -} - -void sim_t::interactive_run_noisy(const std::string& cmd, const std::vector& args) -{ - interactive_run(cmd,args,true); -} - -void sim_t::interactive_run_silent(const std::string& cmd, const std::vector& args) -{ - interactive_run(cmd,args,false); -} - -void sim_t::interactive_run(const std::string& cmd, const std::vector& args, bool noisy) -{ - if(args.size()) - step_all(atoll(args[0].c_str()),1,noisy); - else - while(1) step_all(1,1,noisy); -} - -void sim_t::interactive_run_proc_noisy(const std::string& cmd, const std::vector& args) -{ - interactive_run_proc(cmd,args,true); -} - -void sim_t::interactive_run_proc_silent(const std::string& cmd, const std::vector& args) -{ - interactive_run_proc(cmd,args,false); -} - -void sim_t::interactive_run_proc(const std::string& cmd, const std::vector& a, bool noisy) -{ - if(a.size() == 0) - return; - - int p = atoi(a[0].c_str()); - if(p >= (int)num_cores()) - return; - - if(a.size() == 2) - procs[p]->step(atoi(a[1].c_str()),noisy); - else - while(1) procs[p]->step(1,noisy); -} - -void sim_t::interactive_quit(const std::string& cmd, const std::vector& args) -{ - throw quit_sim(); -} - -reg_t sim_t::get_pc(const std::vector& args) -{ - if(args.size() != 1) - throw trap_illegal_instruction; - - int p = atoi(args[0].c_str()); - if(p >= (int)num_cores()) - throw trap_illegal_instruction; - - return procs[p]->pc; -} - -reg_t sim_t::get_reg(const std::vector& args) -{ - if(args.size() != 2) - throw trap_illegal_instruction; - - int p = atoi(args[0].c_str()); - int r = atoi(args[1].c_str()); - if(p >= (int)num_cores() || r >= NXPR) - throw trap_illegal_instruction; - - return procs[p]->XPR[r]; -} - -reg_t sim_t::get_freg(const std::vector& args) -{ - if(args.size() != 2) - throw trap_illegal_instruction; - - int p = atoi(args[0].c_str()); - int r = atoi(args[1].c_str()); - if(p >= (int)num_cores() || r >= NFPR) - throw trap_illegal_instruction; - - return procs[p]->FPR[r]; -} - -reg_t sim_t::get_tohost(const std::vector& args) -{ - if(args.size() != 1) - throw trap_illegal_instruction; - - int p = atoi(args[0].c_str()); - if(p >= (int)num_cores()) - throw trap_illegal_instruction; - - return procs[p]->tohost; -} - -void sim_t::interactive_reg(const std::string& cmd, const std::vector& args) -{ - printf("0x%016llx\n",(unsigned long long)get_reg(args)); -} - -union fpr -{ - reg_t r; - float s; - double d; -}; - -void sim_t::interactive_fregs(const std::string& cmd, const std::vector& args) -{ - fpr f; - f.r = get_freg(args); - printf("%g\n",f.s); -} - -void sim_t::interactive_fregd(const std::string& cmd, const std::vector& args) -{ - fpr f; - f.r = get_freg(args); - printf("%g\n",f.d); -} - -reg_t sim_t::get_mem(const std::vector& args) -{ - if(args.size() != 1 && args.size() != 2) - throw trap_illegal_instruction; - - std::string addr_str = args[0]; - if(args.size() == 2) - { - int p = atoi(args[0].c_str()); - if(p >= (int)num_cores()) - throw trap_illegal_instruction; - mmu->set_vm_enabled(!!(procs[p]->sr & SR_VM)); - mmu->set_ptbr(procs[p]->mmu.get_ptbr()); - addr_str = args[1]; - } - - reg_t addr = strtol(addr_str.c_str(),NULL,16), val; - if(addr == LONG_MAX) - addr = strtoul(addr_str.c_str(),NULL,16); - - switch(addr % 8) - { - case 0: - val = mmu->load_uint64(addr); - break; - case 4: - val = mmu->load_uint32(addr); - break; - case 2: - case 6: - val = mmu->load_uint16(addr); - break; - default: - val = mmu->load_uint8(addr); - break; - } - return val; -} - -void sim_t::interactive_mem(const std::string& cmd, const std::vector& args) -{ - printf("0x%016llx\n",(unsigned long long)get_mem(args)); -} - -void sim_t::interactive_str(const std::string& cmd, const std::vector& args) -{ - if(args.size() != 1) - throw trap_illegal_instruction; - - reg_t addr = strtol(args[0].c_str(),NULL,16); - - char ch; - while((ch = mmu->load_uint8(addr++))) - putchar(ch); - - putchar('\n'); -} - -void sim_t::interactive_until(const std::string& cmd, const std::vector& args) -{ - if(args.size() < 3) - return; - - std::string scmd = args[0]; - reg_t val = strtol(args[args.size()-1].c_str(),NULL,16); - if(val == LONG_MAX) - val = strtoul(args[args.size()-1].c_str(),NULL,16); - - std::vector args2; - args2 = std::vector(args.begin()+1,args.end()-1); - - while(1) - { - reg_t current; - if(scmd == "reg") - current = get_reg(args2); - else if(scmd == "pc") - current = get_pc(args2); - else if(scmd == "mem") - current = get_mem(args2); - else if(scmd == "tohost") - current = get_tohost(args2); - else - return; - - if(cmd == "until" && current == val) - break; - if(cmd == "while" && current != val) - break; - - step_all(1,1,false); - } -} diff --git a/riscv/sim.h b/riscv/sim.h deleted file mode 100644 index ab388b8..0000000 --- a/riscv/sim.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef _RISCV_SIM_H -#define _RISCV_SIM_H - -#include -#include -#include "processor.h" -#include "mmu.h" - -class appserver_link_t; - -class sim_t -{ -public: - sim_t(int _nprocs, appserver_link_t* _applink, icsim_t* _default_icache, icsim_t* default_dcache); - ~sim_t(); - void run(bool debug); - - void set_tohost(reg_t val); - reg_t get_fromhost(); - void send_ipi(reg_t who); - - size_t num_cores() { return procs.size(); } - -private: - // global architected state - reg_t tohost; - reg_t fromhost; - - appserver_link_t* applink; - - size_t memsz; - char* mem; - mmu_t* mmu; - std::vector procs; - - void step_all(size_t n, size_t interleave, bool noisy); - - void interactive_quit(const std::string& cmd, const std::vector& args); - - void interactive_run(const std::string& cmd, const std::vector& args, bool noisy); - void interactive_run_noisy(const std::string& cmd, const std::vector& args); - void interactive_run_silent(const std::string& cmd, const std::vector& args); - - void interactive_run_proc(const std::string& cmd, const std::vector& args, bool noisy); - void interactive_run_proc_noisy(const std::string& cmd, const std::vector& args); - void interactive_run_proc_silent(const std::string& cmd, const std::vector& args); - - void interactive_reg(const std::string& cmd, const std::vector& args); - void interactive_fregs(const std::string& cmd, const std::vector& args); - void interactive_fregd(const std::string& cmd, const std::vector& args); - void interactive_mem(const std::string& cmd, const std::vector& args); - void interactive_str(const std::string& cmd, const std::vector& args); - void interactive_until(const std::string& cmd, const std::vector& args); - - reg_t get_reg(const std::vector& args); - reg_t get_freg(const std::vector& args); - reg_t get_mem(const std::vector& args); - reg_t get_pc(const std::vector& args); - reg_t get_tohost(const std::vector& args); - - friend class appserver_link_t; -}; - -struct quit_sim {}; - -#endif diff --git a/riscv/trap.cc b/riscv/trap.cc deleted file mode 100644 index cdf7b8d..0000000 --- a/riscv/trap.cc +++ /dev/null @@ -1,10 +0,0 @@ -#include "trap.h" - -const char* trap_name(trap_t t) -{ - #undef DECLARE_TRAP - #define DECLARE_TRAP(x) "trap_"#x - static const char* names[] = { TRAP_LIST }; - - return (unsigned)t >= sizeof(names)/sizeof(names[0]) ? "unknown" : names[t]; -} diff --git a/riscv/trap.h b/riscv/trap.h deleted file mode 100644 index 12a1c04..0000000 --- a/riscv/trap.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef _RISCV_TRAP_H -#define _RISCV_TRAP_H - -#define TRAP_LIST \ - DECLARE_TRAP(instruction_address_misaligned), \ - DECLARE_TRAP(instruction_access_fault), \ - DECLARE_TRAP(illegal_instruction), \ - DECLARE_TRAP(privileged_instruction), \ - DECLARE_TRAP(fp_disabled), \ - DECLARE_TRAP(interrupt), \ - DECLARE_TRAP(syscall), \ - DECLARE_TRAP(breakpoint), \ - DECLARE_TRAP(load_address_misaligned), \ - DECLARE_TRAP(store_address_misaligned), \ - DECLARE_TRAP(load_access_fault), \ - DECLARE_TRAP(store_access_fault), \ - DECLARE_TRAP(vector_disabled), \ - DECLARE_TRAP(vector_bank), \ - DECLARE_TRAP(vector_illegal_instruction), \ - DECLARE_TRAP(reserved1), \ - DECLARE_TRAP(reserved2), \ - DECLARE_TRAP(reserved3), \ - DECLARE_TRAP(int0), \ - DECLARE_TRAP(int1), \ - DECLARE_TRAP(int2), \ - DECLARE_TRAP(int3), \ - DECLARE_TRAP(int4), \ - DECLARE_TRAP(int5), \ - DECLARE_TRAP(int6), \ - DECLARE_TRAP(int7), \ - -#define DECLARE_TRAP(x) trap_##x -enum trap_t -{ - TRAP_LIST - NUM_TRAPS -}; - -struct halt_t {}; // thrown to stop the processor from running - -extern "C" const char* trap_name(trap_t t); - -#endif diff --git a/scripts/config.guess b/scripts/config.guess deleted file mode 100755 index f32079a..0000000 --- a/scripts/config.guess +++ /dev/null @@ -1,1526 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. - -timestamp='2008-01-23' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Originally written by Per Bothner . -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[456]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - case ${UNAME_MACHINE} in - pc98) - echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:[3456]*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - EM64T | authenticamd) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-gnu - else - echo ${UNAME_MACHINE}-unknown-linux-gnueabi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips64 - #undef mips64el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - or32:Linux:*:*) - echo or32-unknown-linux-gnu - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-gnu - exit ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^LIBC/{ - s: ::g - p - }'`" - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - c34*) - echo c34-convex-bsd - exit ;; - c38*) - echo c38-convex-bsd - exit ;; - c4*) - echo c4-convex-bsd - exit ;; - esac -fi - -cat >&2 < in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/scripts/config.sub b/scripts/config.sub deleted file mode 100755 index 9613107..0000000 --- a/scripts/config.sub +++ /dev/null @@ -1,1663 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. - -timestamp='2009-09-02' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ - uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ - | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | fido | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore | mep \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64vr | mips64vrel \ - | mips64orion | mips64orionel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | mt \ - | msp430 \ - | nios | nios2 \ - | ns16k | ns32k \ - | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | score \ - | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu | strongarm \ - | tahoe | thumb | tic4x | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ - | z8k) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - # cbatten - Add maven target - maven) - basic_machine=mipsmavenel-ucb - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nios-* | nios2-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tic55x | c55x*) - basic_machine=tic55x-unknown - os=-coff - ;; - tic6x | c6x*) - basic_machine=tic6x-unknown - os=-coff - ;; - tile*) - basic_machine=tile-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -openbsd* | -solidbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -kaos*) - os=-kaos - ;; - -zvmoe) - os=-zvmoe - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/scripts/install.sh b/scripts/install.sh deleted file mode 100755 index 89fc9b0..0000000 --- a/scripts/install.sh +++ /dev/null @@ -1,238 +0,0 @@ -#! /bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. -# - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -tranformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/scripts/mk-install-dirs.sh b/scripts/mk-install-dirs.sh deleted file mode 100755 index 644b5f7..0000000 --- a/scripts/mk-install-dirs.sh +++ /dev/null @@ -1,40 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman -# Created: 1993-05-16 -# Public domain - -# $Id: mkinstalldirs,v 1.1 2003/09/09 22:24:03 mhampton Exp $ - -errstatus=0 - -for file -do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift - - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case "$pathcomp" in - -* ) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" 1>&2 - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - fi - fi - - pathcomp="$pathcomp/" - done -done - -exit $errstatus - -# mkinstalldirs ends here diff --git a/scripts/vcs-version.sh b/scripts/vcs-version.sh deleted file mode 100755 index 31fae86..0000000 --- a/scripts/vcs-version.sh +++ /dev/null @@ -1,117 +0,0 @@ -#!/bin/bash -#========================================================================= -# vcs-version.sh [options] [src-dir] -#========================================================================= -# -# -h Display this message -# -v Verbose mode -# -# This script will create a version string by querying a version control -# system. The string is appropriate for use in installations and -# distributions. Currently this script assumes we are using git as our -# version control system but it would be possible to check and see if we -# are using an alternative version control system and create a version -# string appropriately. -# -# The script uses git describe plus a few other git commands to create a -# version strings in the following format: -# -# X.Y[-Z-gN][-dirty] -# -# where X is the major release, Y is the minor release, Z is the number -# of commits since the X.Y release, N is an eight digit abbreviated SHA -# hash of the most recent commit and the dirty suffix is appended when -# the working directory used to create the installation or distribution -# is not a pristine checkout. Here are some example version strings: -# -# 0.0 : initial import -# 0.0-3-g99ef6933 : 3rd commit since initial import (N=99ef6933) -# 1.0 : release 1.0 -# 1.1-12-g3487ab12 : 12th commit since release 1.1 (N=3487ab12) -# 1.1-12-g3487ab12-dirty : 12th commit since release 1.1 (N=3487ab12) -# -# The last example is from a dirty working directory. To find the last -# release, the script looks for the last tag (does not need to be an -# annotated tag, but probably should be) which matches the format rel-*. -# If there is no such tag in the history, then the script uses 0.0 as -# the release number and counts the total number of commits since the -# original import for the commit count. -# -# If the current directory is not within the working directory, then the -# path to the source directory should be supplied on the command line. -# -# Author : Christopher Batten -# Date : August 5, 2009 - -set -e - -#------------------------------------------------------------------------- -# Command line parsing -#------------------------------------------------------------------------- - -if ( test "$1" = "-h" ); then - echo "" - sed -n '3p' $0 | sed -e 's/#//' - sed -n '5,/^$/p' $0 | sed -e 's/#//' - exit 1 -fi - -# Source directory command line option - -src_dir="." -if ( test -n "$1" ); then - src_dir="$1" -fi - -#------------------------------------------------------------------------- -# Verify source directory -#------------------------------------------------------------------------- -# If the source directory is not a git working directory output a -# question mark. A distribution will not be in a working directory, but -# the build system should be structured such that this script is not -# executed (and instead the version information should probably come -# from configure). If the user does not specify a source directory use -# the current directory. - -if !( git rev-parse --is-inside-work-tree &> /dev/null ); then - echo "?" - exit 1; -fi - -top_dir=`git rev-parse --show-cdup` -cd ./${top_dir} - -#------------------------------------------------------------------------- -# Create the version string -#------------------------------------------------------------------------- -# See if we can do a describe based on a tag and if not use a default -# release number of 0.0 so that we always get canonical version number - -if ( git describe --tags --match "rel-*" &> /dev/null ); then - ver_str=`git describe --tags --match "rel-*" | sed 's/rel-//'` -else - ver_num="0.0" - ver_commits=`git rev-list --all | wc -l | tr -d " "` - ver_sha=`git describe --tags --match "rel-*" --always` - ver_str="${ver_num}-${ver_commits}-g${ver_sha}" -fi - -# Add a dirty suffix if working directory is dirty - -if !( git diff --quiet ); then - ver_str="${ver_str}-dirty" -else - untracked=`git ls-files --directory --exclude-standard --others -t` - if ( test -n "${untracked}" ); then - ver_str="${ver_str}-dirty" - fi -fi - -# Output the final version string - -echo "${ver_str}" - -# Final exit status - -exit 0; - diff --git a/softfloat/8086/OLD-specialize.c b/softfloat/8086/OLD-specialize.c deleted file mode 100755 index ffb306d..0000000 --- a/softfloat/8086/OLD-specialize.c +++ /dev/null @@ -1,40 +0,0 @@ - -/*============================================================================ - -*** FIX. - -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2b. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -/*---------------------------------------------------------------------------- -| Underflow tininess-detection mode, statically initialized to default value. -| (The declaration in `softfloat.h' must match the `int8' type here.) -*----------------------------------------------------------------------------*/ -bool float_detectTininess = float_tininess_afterRounding; - diff --git a/softfloat/8086/OLD-specialize.h b/softfloat/8086/OLD-specialize.h deleted file mode 100755 index 9e4461c..0000000 --- a/softfloat/8086/OLD-specialize.h +++ /dev/null @@ -1,379 +0,0 @@ - -/*============================================================================ - -*** FIX. - -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2b. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -/*---------------------------------------------------------------------------- -| Internal canonical NaN format. -*----------------------------------------------------------------------------*/ -*** COMMON -typedef struct { - flag sign; - uint128_t bits; -} commonNaNT; - -/*---------------------------------------------------------------------------- -| The pattern for a default generated single-precision NaN. -*----------------------------------------------------------------------------*/ -#define float32Bits_defaultNaN 0xFFC00000 - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is a NaN; -| otherwise, returns 0. -*----------------------------------------------------------------------------*/ -*** COMMON -#define softfloat_isNaNFloat32Bits( a ) ( 0xFF000000 < (uint32_t) ( a )<<1 ) - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is a signaling -| NaN; otherwise, returns 0. -*----------------------------------------------------------------------------*/ -inline bool softfloat_isSigNaNFloat32Bits( uint32_t a ) - { return ( ( a>>22 & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF ); } - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -commonNaNT softfloat_NaNFromFloat32Bits( uint32_t ); -uint32_t softfloat_float32BitsFromNaN( commonNaNT ); -uint32_t softfloat_propNaNFloat32Bits( uint32_t, uint32_t ); - -/*---------------------------------------------------------------------------- -| The pattern for a default generated double-precision NaN. -*----------------------------------------------------------------------------*/ -#define float64Bits_defaultNaN 0xFFF8000000000000 - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is a NaN; -| otherwise, returns 0. -*----------------------------------------------------------------------------*/ -*** COMMON -#define softfloat_isNaNFloat64Bits( a ) ( 0xFFE0000000000000 < (uint64_t) ( a )<<1 ) - - - - - - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is a signaling -| NaN; otherwise, returns 0. -*----------------------------------------------------------------------------*/ - -flag float64_is_signaling_nan( float64 a ) -{ - - return - ( ( ( a>>51 ) & 0xFFF ) == 0xFFE ) - && ( a & LIT64( 0x0007FFFFFFFFFFFF ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point NaN -| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -| exception is raised. -*----------------------------------------------------------------------------*/ - -static commonNaNT float64ToCommonNaN( float64 a ) -{ - commonNaNT z; - - if ( float64_is_signaling_nan( a ) ) float_raise( float_flag_invalid ); - z.sign = a>>63; - z.low = 0; - z.high = a<<12; - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the double- -| precision floating-point format. -*----------------------------------------------------------------------------*/ - -static float64 commonNaNToFloat64( commonNaNT a ) -{ - - return - ( ( (bits64) a.sign )<<63 ) - | LIT64( 0x7FF8000000000000 ) - | ( a.high>>12 ); - -} - -/*---------------------------------------------------------------------------- -| Takes two double-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -static float64 propagateFloat64NaN( float64 a, float64 b ) -{ - flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN; - - aIsNaN = float64_is_nan( a ); - aIsSignalingNaN = float64_is_signaling_nan( a ); - bIsNaN = float64_is_nan( b ); - bIsSignalingNaN = float64_is_signaling_nan( b ); - a |= LIT64( 0x0008000000000000 ); - b |= LIT64( 0x0008000000000000 ); - if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid ); - if ( aIsSignalingNaN ) { - if ( bIsSignalingNaN ) goto returnLargerSignificand; - return bIsNaN ? b : a; - } - else if ( aIsNaN ) { - if ( bIsSignalingNaN | ! bIsNaN ) return a; - returnLargerSignificand: - if ( (bits64) ( a<<1 ) < (bits64) ( b<<1 ) ) return b; - if ( (bits64) ( b<<1 ) < (bits64) ( a<<1 ) ) return a; - return ( a < b ) ? a : b; - } - else { - return b; - } - -} - -#ifdef FLOATX80 - -/*---------------------------------------------------------------------------- -| The pattern for a default generated extended double-precision NaN. The -| `high' and `low' values hold the most- and least-significant bits, -| respectively. -*----------------------------------------------------------------------------*/ -#define floatx80_default_nan_high 0xFFFF -#define floatx80_default_nan_low LIT64( 0xC000000000000000 ) - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point value `a' is a -| NaN; otherwise, returns 0. -*----------------------------------------------------------------------------*/ - -flag floatx80_is_nan( floatx80 a ) -{ - - return ( ( a.high & 0x7FFF ) == 0x7FFF ) && (bits64) ( a.low<<1 ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the extended double-precision floating-point value `a' is a -| signaling NaN; otherwise, returns 0. -*----------------------------------------------------------------------------*/ - -flag floatx80_is_signaling_nan( floatx80 a ) -{ - bits64 aLow; - - aLow = a.low & ~ LIT64( 0x4000000000000000 ); - return - ( ( a.high & 0x7FFF ) == 0x7FFF ) - && (bits64) ( aLow<<1 ) - && ( a.low == aLow ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the extended double-precision floating- -| point NaN `a' to the canonical NaN format. If `a' is a signaling NaN, the -| invalid exception is raised. -*----------------------------------------------------------------------------*/ - -static commonNaNT floatx80ToCommonNaN( floatx80 a ) -{ - commonNaNT z; - - if ( floatx80_is_signaling_nan( a ) ) float_raise( float_flag_invalid ); - z.sign = a.high>>15; - z.low = 0; - z.high = a.low<<1; - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the extended -| double-precision floating-point format. -*----------------------------------------------------------------------------*/ - -static floatx80 commonNaNToFloatx80( commonNaNT a ) -{ - floatx80 z; - - z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 ); - z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF; - return z; - -} - -/*---------------------------------------------------------------------------- -| Takes two extended double-precision floating-point values `a' and `b', one -| of which is a NaN, and returns the appropriate NaN result. If either `a' or -| `b' is a signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b ) -{ - flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN; - - aIsNaN = floatx80_is_nan( a ); - aIsSignalingNaN = floatx80_is_signaling_nan( a ); - bIsNaN = floatx80_is_nan( b ); - bIsSignalingNaN = floatx80_is_signaling_nan( b ); - a.low |= LIT64( 0xC000000000000000 ); - b.low |= LIT64( 0xC000000000000000 ); - if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid ); - if ( aIsSignalingNaN ) { - if ( bIsSignalingNaN ) goto returnLargerSignificand; - return bIsNaN ? b : a; - } - else if ( aIsNaN ) { - if ( bIsSignalingNaN | ! bIsNaN ) return a; - returnLargerSignificand: - if ( a.low < b.low ) return b; - if ( b.low < a.low ) return a; - return ( a.high < b.high ) ? a : b; - } - else { - return b; - } - -} - -#endif - -#ifdef FLOAT128 - -/*---------------------------------------------------------------------------- -| The pattern for a default generated quadruple-precision NaN. The `high' and -| `low' values hold the most- and least-significant bits, respectively. -*----------------------------------------------------------------------------*/ -#define float128_default_nan_high LIT64( 0xFFFF800000000000 ) -#define float128_default_nan_low LIT64( 0x0000000000000000 ) - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point value `a' is a NaN; -| otherwise, returns 0. -*----------------------------------------------------------------------------*/ - -flag float128_is_nan( float128 a ) -{ - - return - ( LIT64( 0xFFFE000000000000 ) <= (bits64) ( a.high<<1 ) ) - && ( a.low || ( a.high & LIT64( 0x0000FFFFFFFFFFFF ) ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns 1 if the quadruple-precision floating-point value `a' is a -| signaling NaN; otherwise, returns 0. -*----------------------------------------------------------------------------*/ - -flag float128_is_signaling_nan( float128 a ) -{ - - return - ( ( ( a.high>>47 ) & 0xFFFF ) == 0xFFFE ) - && ( a.low || ( a.high & LIT64( 0x00007FFFFFFFFFFF ) ) ); - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the quadruple-precision floating-point NaN -| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -| exception is raised. -*----------------------------------------------------------------------------*/ - -static commonNaNT float128ToCommonNaN( float128 a ) -{ - commonNaNT z; - - if ( float128_is_signaling_nan( a ) ) float_raise( float_flag_invalid ); - z.sign = a.high>>63; - shortShift128Left( a.high, a.low, 16, &z.high, &z.low ); - return z; - -} - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the quadruple- -| precision floating-point format. -*----------------------------------------------------------------------------*/ - -static float128 commonNaNToFloat128( commonNaNT a ) -{ - float128 z; - - shift128Right( a.high, a.low, 16, &z.high, &z.low ); - z.high |= ( ( (bits64) a.sign )<<63 ) | LIT64( 0x7FFF800000000000 ); - return z; - -} - -/*---------------------------------------------------------------------------- -| Takes two quadruple-precision floating-point values `a' and `b', one of -| which is a NaN, and returns the appropriate NaN result. If either `a' or -| `b' is a signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -static float128 propagateFloat128NaN( float128 a, float128 b ) -{ - flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN; - - aIsNaN = float128_is_nan( a ); - aIsSignalingNaN = float128_is_signaling_nan( a ); - bIsNaN = float128_is_nan( b ); - bIsSignalingNaN = float128_is_signaling_nan( b ); - a.high |= LIT64( 0x0000800000000000 ); - b.high |= LIT64( 0x0000800000000000 ); - if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid ); - if ( aIsSignalingNaN ) { - if ( bIsSignalingNaN ) goto returnLargerSignificand; - return bIsNaN ? b : a; - } - else if ( aIsNaN ) { - if ( bIsSignalingNaN | ! bIsNaN ) return a; - returnLargerSignificand: - if ( lt128( a.high<<1, a.low, b.high<<1, b.low ) ) return b; - if ( lt128( b.high<<1, b.low, a.high<<1, a.low ) ) return a; - return ( a.high < b.high ) ? a : b; - } - else { - return b; - } - -} - -#endif - diff --git a/softfloat/8086/platform.h b/softfloat/8086/platform.h deleted file mode 100755 index 9355edf..0000000 --- a/softfloat/8086/platform.h +++ /dev/null @@ -1,38 +0,0 @@ - -/*============================================================================ - -*** FIX. - -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2b. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -#define LITTLEENDIAN - diff --git a/softfloat/8086/s_commonNaNToF32UI.c b/softfloat/8086/s_commonNaNToF32UI.c deleted file mode 100755 index 3b96c41..0000000 --- a/softfloat/8086/s_commonNaNToF32UI.c +++ /dev/null @@ -1,17 +0,0 @@ - -#include -#include "platform.h" -#include "specialize.h" - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the single- -| precision floating-point format. -*----------------------------------------------------------------------------*/ - -uint_fast32_t softfloat_commonNaNToF32UI( struct commonNaN a ) -{ - - return (uint_fast32_t) a.sign<<31 | 0x7FC00000 | a.v64>>41; - -} - diff --git a/softfloat/8086/s_commonNaNToF64UI.c b/softfloat/8086/s_commonNaNToF64UI.c deleted file mode 100755 index 474ceee..0000000 --- a/softfloat/8086/s_commonNaNToF64UI.c +++ /dev/null @@ -1,19 +0,0 @@ - -#include -#include "platform.h" -#include "specialize.h" - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the double- -| precision floating-point format. -*----------------------------------------------------------------------------*/ - -uint_fast64_t softfloat_commonNaNToF64UI( struct commonNaN a ) -{ - - return - (uint_fast64_t) a.sign<<63 | UINT64_C( 0x7FF8000000000000 ) - | a.v64>>12; - -} - diff --git a/softfloat/8086/s_f32UIToCommonNaN.c b/softfloat/8086/s_f32UIToCommonNaN.c deleted file mode 100755 index 067e8da..0000000 --- a/softfloat/8086/s_f32UIToCommonNaN.c +++ /dev/null @@ -1,25 +0,0 @@ - -#include -#include "platform.h" -#include "specialize.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point NaN -| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -| exception is raised. -*----------------------------------------------------------------------------*/ -struct commonNaN softfloat_f32UIToCommonNaN( uint_fast32_t uiA ) -{ - struct commonNaN z; - - if ( softfloat_isSigNaNF32UI( uiA ) ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - z.sign = uiA>>31; - z.v64 = (uint_fast64_t) uiA<<41; - z.v0 = 0; - return z; - -} - diff --git a/softfloat/8086/s_f64UIToCommonNaN.c b/softfloat/8086/s_f64UIToCommonNaN.c deleted file mode 100755 index f933ded..0000000 --- a/softfloat/8086/s_f64UIToCommonNaN.c +++ /dev/null @@ -1,25 +0,0 @@ - -#include -#include "platform.h" -#include "specialize.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point NaN -| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -| exception is raised. -*----------------------------------------------------------------------------*/ -struct commonNaN softfloat_f64UIToCommonNaN( uint_fast64_t uiA ) -{ - struct commonNaN z; - - if ( softfloat_isSigNaNF64UI( uiA ) ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - z.sign = uiA>>63; - z.v64 = uiA<<12; - z.v0 = 0; - return z; - -} - diff --git a/softfloat/8086/s_isSigNaNF32UI.c b/softfloat/8086/s_isSigNaNF32UI.c deleted file mode 100755 index 0a9c33f..0000000 --- a/softfloat/8086/s_isSigNaNF32UI.c +++ /dev/null @@ -1,13 +0,0 @@ - -#include -#include -#include "platform.h" -#include "specialize.h" - -bool softfloat_isSigNaNF32UI( uint_fast32_t ui ) -{ - - return ( ( ui>>22 & 0x1FF ) == 0x1FE ) && ( ui & 0x003FFFFF ); - -} - diff --git a/softfloat/8086/s_isSigNaNF64UI.c b/softfloat/8086/s_isSigNaNF64UI.c deleted file mode 100755 index d255213..0000000 --- a/softfloat/8086/s_isSigNaNF64UI.c +++ /dev/null @@ -1,15 +0,0 @@ - -#include -#include -#include "platform.h" -#include "specialize.h" - -bool softfloat_isSigNaNF64UI( uint_fast64_t ui ) -{ - - return - ( ( ui>>51 & 0xFFF ) == 0xFFE ) - && ( ui & UINT64_C( 0x0007FFFFFFFFFFFF ) ); - -} - diff --git a/softfloat/8086/s_propagateNaNF32UI.c b/softfloat/8086/s_propagateNaNF32UI.c deleted file mode 100755 index 07774e8..0000000 --- a/softfloat/8086/s_propagateNaNF32UI.c +++ /dev/null @@ -1,55 +0,0 @@ - -/*** UPDATE COMMENTS. ***/ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Takes two single-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -uint_fast32_t - softfloat_propagateNaNF32UI( uint_fast32_t uiA, uint_fast32_t uiB ) -{ - bool isNaNA, isSigNaNA, isNaNB, isSigNaNB; - uint_fast32_t uiMagA, uiMagB; - - /*------------------------------------------------------------------------ - *------------------------------------------------------------------------*/ - isNaNA = isNaNF32UI( uiA ); - isSigNaNA = softfloat_isSigNaNF32UI( uiA ); - isNaNB = isNaNF32UI( uiB ); - isSigNaNB = softfloat_isSigNaNF32UI( uiB ); - /*------------------------------------------------------------------------ - | Make NaNs non-signaling. - *------------------------------------------------------------------------*/ - uiA |= 0x00400000; - uiB |= 0x00400000; - /*------------------------------------------------------------------------ - *------------------------------------------------------------------------*/ - if ( isSigNaNA | isSigNaNB ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - if ( isSigNaNA ) { - if ( isSigNaNB ) goto returnLargerSignificand; - return isNaNB ? uiB : uiA; - } else if ( isNaNA ) { - if ( isSigNaNB || ! isNaNB ) return uiA; - returnLargerSignificand: - uiMagA = uiA<<1; - uiMagB = uiB<<1; - if ( uiMagA < uiMagB ) return uiB; - if ( uiMagB < uiMagA ) return uiA; - return ( uiA < uiB ) ? uiA : uiB; - } else { - return uiB; - } - -} - diff --git a/softfloat/8086/s_propagateNaNF64UI.c b/softfloat/8086/s_propagateNaNF64UI.c deleted file mode 100755 index 0ff6446..0000000 --- a/softfloat/8086/s_propagateNaNF64UI.c +++ /dev/null @@ -1,55 +0,0 @@ - -/*** UPDATE COMMENTS. ***/ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Takes two double-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -uint_fast64_t - softfloat_propagateNaNF64UI( uint_fast64_t uiA, uint_fast64_t uiB ) -{ - bool isNaNA, isSigNaNA, isNaNB, isSigNaNB; - uint_fast64_t uiMagA, uiMagB; - - /*------------------------------------------------------------------------ - *------------------------------------------------------------------------*/ - isNaNA = isNaNF64UI( uiA ); - isSigNaNA = softfloat_isSigNaNF64UI( uiA ); - isNaNB = isNaNF64UI( uiB ); - isSigNaNB = softfloat_isSigNaNF64UI( uiB ); - /*------------------------------------------------------------------------ - | Make NaNs non-signaling. - *------------------------------------------------------------------------*/ - uiA |= UINT64_C( 0x0008000000000000 ); - uiB |= UINT64_C( 0x0008000000000000 ); - /*------------------------------------------------------------------------ - *------------------------------------------------------------------------*/ - if ( isSigNaNA | isSigNaNB ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - if ( isSigNaNA ) { - if ( isSigNaNB ) goto returnLargerSignificand; - return isNaNB ? uiB : uiA; - } else if ( isNaNA ) { - if ( isSigNaNB || ! isNaNB ) return uiA; - returnLargerSignificand: - uiMagA = uiA & UINT64_C( 0x7FFFFFFFFFFFFFFF ); - uiMagB = uiB & UINT64_C( 0x7FFFFFFFFFFFFFFF ); - if ( uiMagA < uiMagB ) return uiB; - if ( uiMagB < uiMagA ) return uiA; - return ( uiA < uiB ) ? uiA : uiB; - } else { - return uiB; - } - -} - diff --git a/softfloat/8086/softfloat_raiseFlags.c b/softfloat/8086/softfloat_raiseFlags.c deleted file mode 100755 index c0c0dc8..0000000 --- a/softfloat/8086/softfloat_raiseFlags.c +++ /dev/null @@ -1,51 +0,0 @@ - -/*============================================================================ - -*** FIX. - -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2b. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -#include "platform.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Raises the exceptions specified by `flags'. Floating-point traps can be -| defined here if desired. It is currently not possible for such a trap -| to substitute a result value. If traps are not implemented, this routine -| should be simply `float_exception_flags |= flags;'. -*----------------------------------------------------------------------------*/ - -void softfloat_raiseFlags( int_fast8_t flags ) -{ - - softfloat_exceptionFlags |= flags; - -} - diff --git a/softfloat/8086/softfloat_types.h b/softfloat/8086/softfloat_types.h deleted file mode 100755 index b5c1828..0000000 --- a/softfloat/8086/softfloat_types.h +++ /dev/null @@ -1,16 +0,0 @@ - -#ifndef softfloat_types_h -#define softfloat_types_h - -/*** COMMENTS. ***/ - -#include -#include - -typedef struct { uint32_t v; } float32_t; -typedef struct { uint64_t v; } float64_t; -typedef struct { uint64_t v; uint16_t x; } floatx80_t; -typedef struct { uint64_t v[ 2 ]; } float128_t; - -#endif - diff --git a/softfloat/8086/specialize.h b/softfloat/8086/specialize.h deleted file mode 100755 index ca0bb1d..0000000 --- a/softfloat/8086/specialize.h +++ /dev/null @@ -1,113 +0,0 @@ - -/*============================================================================ - -*** FIX. - -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2b. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -#include -#include - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -#define init_detectTininess softfloat_tininess_afterRounding; - -/*---------------------------------------------------------------------------- -| Structure used to transfer NaN representations from one format to another. -*----------------------------------------------------------------------------*/ -struct commonNaN { - bool sign; - uint64_t v64, v0; -}; - -/*---------------------------------------------------------------------------- -| The pattern for a default generated single-precision NaN. -*----------------------------------------------------------------------------*/ -#define defaultNaNF32UI 0xFFC00000 - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is a signaling -| NaN; otherwise, returns 0. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 1 <= INLINE_LEVEL ) -INLINE bool softfloat_isSigNaNF32UI( uint_fast32_t ui ) - { return ( ( ui>>22 & 0x1FF ) == 0x1FE ) && ( ui & 0x003FFFFF ); } -#else -bool softfloat_isSigNaNF32UI( uint_fast32_t ); -#endif - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -struct commonNaN softfloat_f32UIToCommonNaN( uint_fast32_t ); -#if defined INLINE_LEVEL && ( 1 <= INLINE_LEVEL ) -INLINE uint_fast32_t softfloat_commonNaNToF32UI( struct commonNaN a ) - { return (uint_fast32_t) a.sign<<31 | 0x7FC00000 | a.v64>>41; } -#else -uint_fast32_t softfloat_commonNaNToF32UI( struct commonNaN ); -#endif - -/*---------------------------------------------------------------------------- -| Takes two single-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ -uint_fast32_t softfloat_propagateNaNF32UI( uint_fast32_t, uint_fast32_t ); - -/*---------------------------------------------------------------------------- -| The pattern for a default generated double-precision NaN. -*----------------------------------------------------------------------------*/ -#define defaultNaNF64UI UINT64_C(0xFFF8000000000000) - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 1 <= INLINE_LEVEL ) -INLINE bool softfloat_isSigNaNF64UI( uint_fast64_t ui ) -{ - return - ( ( ui>>51 & 0xFFF ) == 0xFFE ) - && ( ui & UINT64_C( 0x0007FFFFFFFFFFFF ) ); -} -#else -bool softfloat_isSigNaNF64UI( uint_fast64_t ); -#endif - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -/*** MIGHT BE INLINE'D. ***/ -struct commonNaN softfloat_f64UIToCommonNaN( uint_fast64_t ); -uint_fast64_t softfloat_commonNaNToF64UI( struct commonNaN ); - -/*---------------------------------------------------------------------------- -| Takes two double-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ -uint_fast64_t softfloat_propagateNaNF64UI( uint_fast64_t, uint_fast64_t ); - diff --git a/softfloat/f32_add.c b/softfloat/f32_add.c deleted file mode 100755 index dc53d68..0000000 --- a/softfloat/f32_add.c +++ /dev/null @@ -1,29 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -float32_t f32_add( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool signA; - union ui32_f32 uB; - uint_fast32_t uiB; - bool signB; - float32_t ( *magsRoutine )( uint_fast32_t, uint_fast32_t, bool ); - - uA.f = a; - uiA = uA.ui; - signA = signF32UI( uiA ); - uB.f = b; - uiB = uB.ui; - signB = signF32UI( uiB ); - magsRoutine = - ( signA == signB ) ? softfloat_addMagsF32 : softfloat_subMagsF32; - return magsRoutine( uiA, uiB, signA ); - -} - diff --git a/softfloat/f32_div.c b/softfloat/f32_div.c deleted file mode 100755 index 958b140..0000000 --- a/softfloat/f32_div.c +++ /dev/null @@ -1,96 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float32_t f32_div( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool signA; - int_fast16_t expA; - uint_fast32_t sigA; - union ui32_f32 uB; - uint_fast32_t uiB; - bool signB; - int_fast16_t expB; - uint_fast32_t sigB; - bool signZ; - struct exp16_sig32 normExpSig; - int_fast16_t expZ; - uint_fast32_t sigZ; - uint_fast32_t uiZ; - union ui32_f32 uZ; - - uA.f = a; - uiA = uA.ui; - signA = signF32UI( uiA ); - expA = expF32UI( uiA ); - sigA = fracF32UI( uiA ); - uB.f = b; - uiB = uB.ui; - signB = signF32UI( uiB ); - expB = expF32UI( uiB ); - sigB = fracF32UI( uiB ); - signZ = signA ^ signB; - if ( expA == 0xFF ) { - if ( sigA ) goto propagateNaN; - if ( expB == 0xFF ) { - if ( sigB ) goto propagateNaN; - goto invalid; - } - goto infinity; - } - if ( expB == 0xFF ) { - if ( sigB ) goto propagateNaN; - goto zero; - } - if ( ! expB ) { - if ( ! sigB ) { - if ( ! ( expA | sigA ) ) goto invalid; - softfloat_raiseFlags( softfloat_flag_infinity ); - goto infinity; - } - normExpSig = softfloat_normSubnormalF32Sig( sigB ); - expB = normExpSig.exp; - sigB = normExpSig.sig; - } - if ( ! expA ) { - if ( ! sigA ) goto zero; - normExpSig = softfloat_normSubnormalF32Sig( sigA ); - expA = normExpSig.exp; - sigA = normExpSig.sig; - } - expZ = expA - expB + 0x7D; - sigA = ( sigA | 0x00800000 )<<7; - sigB = ( sigB | 0x00800000 )<<8; - if ( sigB <= ( sigA + sigA ) ) { - ++expZ; - sigA >>= 1; - } - sigZ = ( (uint_fast64_t) sigA<<32 ) / sigB; - if ( ! ( sigZ & 0x3F ) ) { - sigZ |= ( (uint_fast64_t) sigB * sigZ != (uint_fast64_t) sigA<<32 ); - } - return softfloat_roundPackToF32( signZ, expZ, sigZ ); - propagateNaN: - uiZ = softfloat_propagateNaNF32UI( uiA, uiB ); - goto uiZ; - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF32UI; - goto uiZ; - infinity: - uiZ = packToF32UI( signZ, 0xFF, 0 ); - goto uiZ; - zero: - uiZ = packToF32UI( signZ, 0, 0 ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f32_eq.c b/softfloat/f32_eq.c deleted file mode 100755 index 8f2306b..0000000 --- a/softfloat/f32_eq.c +++ /dev/null @@ -1,34 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -bool f32_eq( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - union ui32_f32 uB; - uint_fast32_t uiB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF32UI( uiA ) == 0xFF ) && fracF32UI( uiA ) ) - || ( ( expF32UI( uiB ) == 0xFF ) && fracF32UI( uiB ) ) - ) { - if ( - softfloat_isSigNaNF32UI( uiA ) || softfloat_isSigNaNF32UI( uiB ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - return false; - } - return ( uiA == uiB ) || ! (uint32_t) ( ( uiA | uiB )<<1 ); - -} - diff --git a/softfloat/f32_eq_signaling.c b/softfloat/f32_eq_signaling.c deleted file mode 100755 index bfba48a..0000000 --- a/softfloat/f32_eq_signaling.c +++ /dev/null @@ -1,29 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -bool f32_eq_signaling( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - union ui32_f32 uB; - uint_fast32_t uiB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF32UI( uiA ) == 0xFF ) && fracF32UI( uiA ) ) - || ( ( expF32UI( uiB ) == 0xFF ) && fracF32UI( uiB ) ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - return false; - } - return ( uiA == uiB ) || ! (uint32_t) ( ( uiA | uiB )<<1 ); - -} - diff --git a/softfloat/f32_isSignalingNaN.c b/softfloat/f32_isSignalingNaN.c deleted file mode 100755 index 09aaa82..0000000 --- a/softfloat/f32_isSignalingNaN.c +++ /dev/null @@ -1,16 +0,0 @@ - -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -bool f32_isSignalingNaN( float32_t a ) -{ - union ui32_f32 uA; - - uA.f = a; - return softfloat_isSigNaNF32UI( uA.ui ); - -} - diff --git a/softfloat/f32_le.c b/softfloat/f32_le.c deleted file mode 100755 index 5f47be5..0000000 --- a/softfloat/f32_le.c +++ /dev/null @@ -1,34 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -bool f32_le( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - union ui32_f32 uB; - uint_fast32_t uiB; - bool signA, signB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF32UI( uiA ) == 0xFF ) && fracF32UI( uiA ) ) - || ( ( expF32UI( uiB ) == 0xFF ) && fracF32UI( uiB ) ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - return false; - } - signA = signF32UI( uiA ); - signB = signF32UI( uiB ); - return - ( signA != signB ) ? signA || ! (uint32_t) ( ( uiA | uiB )<<1 ) - : ( uiA == uiB ) || ( signA ^ ( uiA < uiB ) ); - -} - diff --git a/softfloat/f32_le_quiet.c b/softfloat/f32_le_quiet.c deleted file mode 100755 index 2b541da..0000000 --- a/softfloat/f32_le_quiet.c +++ /dev/null @@ -1,39 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -bool f32_le_quiet( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - union ui32_f32 uB; - uint_fast32_t uiB; - bool signA, signB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF32UI( uiA ) == 0xFF ) && fracF32UI( uiA ) ) - || ( ( expF32UI( uiB ) == 0xFF ) && fracF32UI( uiB ) ) - ) { - if ( - softfloat_isSigNaNF32UI( uiA ) || softfloat_isSigNaNF32UI( uiB ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - return false; - } - signA = signF32UI( uiA ); - signB = signF32UI( uiB ); - return - ( signA != signB ) ? signA || ! (uint32_t) ( ( uiA | uiB )<<1 ) - : ( uiA == uiB ) || ( signA ^ ( uiA < uiB ) ); - -} - diff --git a/softfloat/f32_lt.c b/softfloat/f32_lt.c deleted file mode 100755 index 753b28a..0000000 --- a/softfloat/f32_lt.c +++ /dev/null @@ -1,34 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -bool f32_lt( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - union ui32_f32 uB; - uint_fast32_t uiB; - bool signA, signB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF32UI( uiA ) == 0xFF ) && fracF32UI( uiA ) ) - || ( ( expF32UI( uiB ) == 0xFF ) && fracF32UI( uiB ) ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - return false; - } - signA = signF32UI( uiA ); - signB = signF32UI( uiB ); - return - ( signA != signB ) ? signA && ( (uint32_t) ( ( uiA | uiB )<<1 ) != 0 ) - : ( uiA != uiB ) && ( signA ^ ( uiA < uiB ) ); - -} - diff --git a/softfloat/f32_lt_quiet.c b/softfloat/f32_lt_quiet.c deleted file mode 100755 index ecd90bf..0000000 --- a/softfloat/f32_lt_quiet.c +++ /dev/null @@ -1,39 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -bool f32_lt_quiet( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - union ui32_f32 uB; - uint_fast32_t uiB; - bool signA, signB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF32UI( uiA ) == 0xFF ) && fracF32UI( uiA ) ) - || ( ( expF32UI( uiB ) == 0xFF ) && fracF32UI( uiB ) ) - ) { - if ( - softfloat_isSigNaNF32UI( uiA ) || softfloat_isSigNaNF32UI( uiB ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - return false; - } - signA = signF32UI( uiA ); - signB = signF32UI( uiB ); - return - ( signA != signB ) ? signA && ( (uint32_t) ( ( uiA | uiB )<<1 ) != 0 ) - : ( uiA != uiB ) && ( signA ^ ( uiA < uiB ) ); - -} - diff --git a/softfloat/f32_mul.c b/softfloat/f32_mul.c deleted file mode 100755 index d49c1dd..0000000 --- a/softfloat/f32_mul.c +++ /dev/null @@ -1,89 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float32_t f32_mul( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool signA; - int_fast16_t expA; - uint_fast32_t sigA; - union ui32_f32 uB; - uint_fast32_t uiB; - bool signB; - int_fast16_t expB; - uint_fast32_t sigB; - bool signZ; - uint_fast32_t magBits; - struct exp16_sig32 normExpSig; - int_fast16_t expZ; - uint_fast32_t sigZ, uiZ; - union ui32_f32 uZ; - - uA.f = a; - uiA = uA.ui; - signA = signF32UI( uiA ); - expA = expF32UI( uiA ); - sigA = fracF32UI( uiA ); - uB.f = b; - uiB = uB.ui; - signB = signF32UI( uiB ); - expB = expF32UI( uiB ); - sigB = fracF32UI( uiB ); - signZ = signA ^ signB; - if ( expA == 0xFF ) { - if ( sigA || ( ( expB == 0xFF ) && sigB ) ) goto propagateNaN; - magBits = expB | sigB; - goto infArg; - } - if ( expB == 0xFF ) { - if ( sigB ) goto propagateNaN; - magBits = expA | sigA; - goto infArg; - } - if ( ! expA ) { - if ( ! sigA ) goto zero; - normExpSig = softfloat_normSubnormalF32Sig( sigA ); - expA = normExpSig.exp; - sigA = normExpSig.sig; - } - if ( ! expB ) { - if ( ! sigB ) goto zero; - normExpSig = softfloat_normSubnormalF32Sig( sigB ); - expB = normExpSig.exp; - sigB = normExpSig.sig; - } - expZ = expA + expB - 0x7F; - sigA = ( sigA | 0x00800000 )<<7; - sigB = ( sigB | 0x00800000 )<<8; - sigZ = softfloat_shortShift64RightJam( (uint_fast64_t) sigA * sigB, 32 ); - if ( sigZ < 0x40000000 ) { - --expZ; - sigZ <<= 1; - } - return softfloat_roundPackToF32( signZ, expZ, sigZ ); - propagateNaN: - uiZ = softfloat_propagateNaNF32UI( uiA, uiB ); - goto uiZ; - infArg: - if ( ! magBits ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF32UI; - } else { - uiZ = packToF32UI( signZ, 0xFF, 0 ); - } - goto uiZ; - zero: - uiZ = packToF32UI( signZ, 0, 0 ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f32_mulAdd.c b/softfloat/f32_mulAdd.c deleted file mode 100755 index 3d4cee9..0000000 --- a/softfloat/f32_mulAdd.c +++ /dev/null @@ -1,25 +0,0 @@ - -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -float32_t f32_mulAdd( float32_t a, float32_t b, float32_t c ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - union ui32_f32 uB; - uint_fast32_t uiB; - union ui32_f32 uC; - uint_fast32_t uiC; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - uC.f = c; - uiC = uC.ui; - return softfloat_mulAddF32( 0, uiA, uiB, uiC ); - -} - diff --git a/softfloat/f32_rem.c b/softfloat/f32_rem.c deleted file mode 100755 index d29b840..0000000 --- a/softfloat/f32_rem.c +++ /dev/null @@ -1,124 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float32_t f32_rem( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool signA; - int_fast16_t expA; - uint_fast32_t sigA; - union ui32_f32 uB; - uint_fast32_t uiB; - bool signB; - int_fast16_t expB; - uint_fast32_t sigB; - struct exp16_sig32 normExpSig; - int_fast16_t expDiff; - uint_fast32_t q; - uint_fast64_t sigA64, sigB64, q64; - uint_fast32_t alternateSigA; - uint32_t sigMean; - bool signZ; - uint_fast32_t uiZ; - union ui32_f32 uZ; - - uA.f = a; - uiA = uA.ui; - signA = signF32UI( uiA ); - expA = expF32UI( uiA ); - sigA = fracF32UI( uiA ); - uB.f = b; - uiB = uB.ui; - signB = signF32UI( uiB ); - expB = expF32UI( uiB ); - sigB = fracF32UI( uiB ); - if ( expA == 0xFF ) { - if ( sigA || ( ( expB == 0xFF ) && sigB ) ) goto propagateNaN; - goto invalid; - } - if ( expB == 0xFF ) { - if ( sigB ) goto propagateNaN; - return a; - } - if ( ! expB ) { - if ( ! sigB ) goto invalid; - normExpSig = softfloat_normSubnormalF32Sig( sigB ); - expB = normExpSig.exp; - sigB = normExpSig.sig; - } - if ( ! expA ) { - if ( ! sigA ) return a; - normExpSig = softfloat_normSubnormalF32Sig( sigA ); - expA = normExpSig.exp; - sigA = normExpSig.sig; - } - expDiff = expA - expB; - sigA |= 0x00800000; - sigB |= 0x00800000; - if ( expDiff < 32 ) { - sigA <<= 8; - sigB <<= 8; - if ( expDiff < 0 ) { - if ( expDiff < -1 ) return a; - sigA >>= 1; - } - q = ( sigB <= sigA ); - if ( q ) sigA -= sigB; - if ( 0 < expDiff ) { - q = ( (uint_fast64_t) sigA<<32 ) / sigB; - q >>= 32 - expDiff; - sigB >>= 2; - sigA = ( ( sigA>>1 )<<( expDiff - 1 ) ) - sigB * q; - } else { - sigA >>= 2; - sigB >>= 2; - } - } else { - if ( sigB <= sigA ) sigA -= sigB; - sigA64 = (uint_fast64_t) sigA<<40; - sigB64 = (uint_fast64_t) sigB<<40; - expDiff -= 64; - while ( 0 < expDiff ) { - q64 = softfloat_estimateDiv128To64( sigA64, 0, sigB64 ); - q64 = ( 2 < q64 ) ? q64 - 2 : 0; - sigA64 = - ( ( sigB * q64 )<<38 ); - expDiff -= 62; - } - expDiff += 64; - q64 = softfloat_estimateDiv128To64( sigA64, 0, sigB64 ); - q64 = ( 2 < q64 ) ? q64 - 2 : 0; - q = q64>>( 64 - expDiff ); - sigB <<= 6; - sigA = ( ( sigA64>>33 )<<( expDiff - 1 ) ) - sigB * q; - } - do { - alternateSigA = sigA; - ++q; - sigA -= sigB; - } while ( sigA < 0x80000000 ); - sigMean = sigA + alternateSigA; - if ( ( 0x80000000 <= sigMean ) || ( ! sigMean && ( q & 1 ) ) ) { - sigA = alternateSigA; - } - signZ = ( 0x80000000 <= sigA ); - if ( signZ ) sigA = - sigA; - return softfloat_normRoundPackToF32( signA ^ signZ, expB, sigA ); - propagateNaN: - uiZ = softfloat_propagateNaNF32UI( uiA, uiB ); - goto uiZ; - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF32UI; - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f32_roundToInt.c b/softfloat/f32_roundToInt.c deleted file mode 100755 index f8f9114..0000000 --- a/softfloat/f32_roundToInt.c +++ /dev/null @@ -1,78 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float32_t f32_roundToInt( float32_t a, int_fast8_t roundingMode, bool exact ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - int_fast16_t expA; - uint_fast32_t uiZ; - bool signA; - uint_fast32_t lastBitMask, roundBitsMask; - union ui32_f32 uZ; - - uA.f = a; - uiA = uA.ui; - expA = expF32UI( uiA ); - if ( 0x96 <= expA ) { - if ( ( expA == 0xFF ) && fracF32UI( uiA ) ) { - uiZ = softfloat_propagateNaNF32UI( uiA, 0 ); - goto uiZ; - } - return a; - } - if ( expA <= 0x7E ) { - if ( ! (uint32_t) ( uiA<<1 ) ) return a; - if ( exact ) softfloat_exceptionFlags |= softfloat_flag_inexact; - signA = signF32UI( uiA ); - switch ( roundingMode ) { - case softfloat_round_nearest_even: - if ( ( expA == 0x7E ) && fracF32UI( uiA ) ) { - uiZ = packToF32UI( signA, 0x7F, 0 ); - goto uiZ; - } - break; - case softfloat_round_min: - uiZ = signA ? 0xBF800000 : 0; - goto uiZ; - case softfloat_round_max: - uiZ = signA ? 0x80000000 : 0x3F800000; - goto uiZ; - case softfloat_round_nearest_maxMag: - if ( expA == 0x7E ) { - uiZ = packToF32UI( signA, 0x7F, 0 ); - goto uiZ; - } - break; - } - uiZ = packToF32UI( signA, 0, 0 ); - goto uiZ; - } - lastBitMask = (uint_fast32_t) 1<<( 0x96 - expA ); - roundBitsMask = lastBitMask - 1; - uiZ = uiA; - if ( roundingMode == softfloat_round_nearest_maxMag ) { - uiZ += lastBitMask>>1; - } else if ( roundingMode == softfloat_round_nearest_even ) { - uiZ += lastBitMask>>1; - if ( ! ( uiZ & roundBitsMask ) ) uiZ &= ~ lastBitMask; - } else if ( roundingMode != softfloat_round_minMag ) { - if ( signF32UI( uiZ ) ^ ( roundingMode == softfloat_round_max ) ) { - uiZ += roundBitsMask; - } - } - uiZ &= ~ roundBitsMask; - if ( exact && ( uiZ != uiA ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f32_sqrt.c b/softfloat/f32_sqrt.c deleted file mode 100755 index c9eb907..0000000 --- a/softfloat/f32_sqrt.c +++ /dev/null @@ -1,74 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float32_t f32_sqrt( float32_t a ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool signA; - int_fast16_t expA; - uint_fast32_t sigA, uiZ; - struct exp16_sig32 normExpSig; - int_fast16_t expZ; - uint_fast32_t sigZ; - uint_fast64_t term, rem; - union ui32_f32 uZ; - - uA.f = a; - uiA = uA.ui; - signA = signF32UI( uiA ); - expA = expF32UI( uiA ); - sigA = fracF32UI( uiA ); - if ( expA == 0xFF ) { - if ( sigA ) { - uiZ = softfloat_propagateNaNF32UI( uiA, 0 ); - goto uiZ; - } - if ( ! signA ) return a; - goto invalid; - } - if ( signA ) { - if ( ! ( expA | sigA ) ) return a; - goto invalid; - } - if ( ! expA ) { - if ( ! sigA ) return a; - normExpSig = softfloat_normSubnormalF32Sig( sigA ); - expA = normExpSig.exp; - sigA = normExpSig.sig; - } - expZ = ( ( expA - 0x7F )>>1 ) + 0x7E; - sigA = ( sigA | 0x00800000 )<<8; - sigZ = softfloat_estimateSqrt32( expA, sigA ) + 2; - if ( ( sigZ & 0x7F ) <= 5 ) { - if ( sigZ < 2 ) { - sigZ = 0x7FFFFFFF; - goto roundPack; - } - sigA >>= expA & 1; - term = (uint_fast64_t) sigZ * sigZ; - rem = ( (uint_fast64_t) sigA<<32 ) - term; - while ( UINT64_C( 0x8000000000000000 ) <= rem ) { - --sigZ; - rem += ( (uint_fast64_t) sigZ<<1 ) | 1; - } - sigZ |= ( rem != 0 ); - } - sigZ = softfloat_shortShift32Right1Jam( sigZ ); - roundPack: - return softfloat_roundPackToF32( 0, expZ, sigZ ); - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF32UI; - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f32_sub.c b/softfloat/f32_sub.c deleted file mode 100755 index c64df8e..0000000 --- a/softfloat/f32_sub.c +++ /dev/null @@ -1,29 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -float32_t f32_sub( float32_t a, float32_t b ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool signA; - union ui32_f32 uB; - uint_fast32_t uiB; - bool signB; - float32_t ( *magsRoutine )( uint_fast32_t, uint_fast32_t, bool ); - - uA.f = a; - uiA = uA.ui; - signA = signF32UI( uiA ); - uB.f = b; - uiB = uB.ui; - signB = signF32UI( uiB ); - magsRoutine = - ( signA == signB ) ? softfloat_subMagsF32 : softfloat_addMagsF32; - return magsRoutine( uiA, uiB ^ 0x80000000, signA ); - -} - diff --git a/softfloat/f32_to_f64.c b/softfloat/f32_to_f64.c deleted file mode 100755 index 9f0ae5c..0000000 --- a/softfloat/f32_to_f64.c +++ /dev/null @@ -1,47 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float64_t f32_to_f64( float32_t a ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool sign; - int_fast16_t exp; - uint_fast32_t sig; - uint_fast64_t uiZ; - struct exp16_sig32 normExpSig; - union ui64_f64 uZ; - - uA.f = a; - uiA = uA.ui; - sign = signF32UI( uiA ); - exp = expF32UI( uiA ); - sig = fracF32UI( uiA ); - if ( exp == 0xFF ) { - uiZ = - sig ? softfloat_commonNaNToF64UI( - softfloat_f32UIToCommonNaN( uiA ) ) - : packToF64UI( sign, 0x7FF, 0 ); - goto uiZ; - } - if ( ! exp ) { - if ( ! sig ) { - uiZ = packToF64UI( sign, 0, 0 ); - goto uiZ; - } - normExpSig = softfloat_normSubnormalF32Sig( sig ); - exp = normExpSig.exp - 1; - sig = normExpSig.sig; - } - uiZ = packToF64UI( sign, exp + 0x380, (uint_fast64_t) sig<<29 ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f32_to_i32.c b/softfloat/f32_to_i32.c deleted file mode 100755 index bbbaee0..0000000 --- a/softfloat/f32_to_i32.c +++ /dev/null @@ -1,34 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -int_fast32_t f32_to_i32( float32_t a, int_fast8_t roundingMode, bool exact ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool sign; - int_fast16_t exp; - uint_fast32_t sig; - uint_fast64_t sig64; - int_fast16_t shiftCount; - - uA.f = a; - uiA = uA.ui; - sign = signF32UI( uiA ); - exp = expF32UI( uiA ); - sig = fracF32UI( uiA ); - if ( ( exp == 0xFF ) && sig ) sign = 0; - if ( exp ) sig |= 0x00800000; - sig64 = (uint_fast64_t) sig<<32; - shiftCount = 0xAF - exp; - if ( 0 < shiftCount ) { - sig64 = softfloat_shift64RightJam( sig64, shiftCount ); - } - return softfloat_roundPackToI32( sign, sig64, roundingMode, exact ); - -} - diff --git a/softfloat/f32_to_i32_r_minMag.c b/softfloat/f32_to_i32_r_minMag.c deleted file mode 100755 index 63ff1e2..0000000 --- a/softfloat/f32_to_i32_r_minMag.c +++ /dev/null @@ -1,45 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -int_fast32_t f32_to_i32_r_minMag( float32_t a, bool exact ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - int_fast16_t exp; - uint_fast32_t sig; - bool sign; - int_fast16_t shiftCount; - int_fast32_t absZ; - - uA.f = a; - uiA = uA.ui; - exp = expF32UI( uiA ); - sig = fracF32UI( uiA ); - if ( exp < 0x7F ) { - if ( exact && ( exp | sig ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return 0; - } - sign = signF32UI( uiA ); - shiftCount = 0x9E - exp; - if ( shiftCount <= 0 ) { - if ( uiA != packToF32UI( 1, 0x9E, 0 ) ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - if ( ! sign || ( ( exp == 0xFF ) && sig ) ) return 0x7FFFFFFF; - } - return -0x7FFFFFFF - 1; - } - sig = ( sig | 0x00800000 )<<8; - absZ = sig>>shiftCount; - if ( exact && (uint32_t) ( sig<<( ( - shiftCount ) & 31 ) ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return sign ? - absZ : absZ; - -} - diff --git a/softfloat/f32_to_i64.c b/softfloat/f32_to_i64.c deleted file mode 100755 index c0b8981..0000000 --- a/softfloat/f32_to_i64.c +++ /dev/null @@ -1,44 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -int_fast64_t f32_to_i64( float32_t a, int_fast8_t roundingMode, bool exact ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool sign; - int_fast16_t exp; - uint_fast32_t sig; - int_fast16_t shiftCount; - uint_fast64_t sig64, extra; - struct uint64_extra sig64Extra; - - uA.f = a; - uiA = uA.ui; - sign = signF32UI( uiA ); - exp = expF32UI( uiA ); - sig = fracF32UI( uiA ); - shiftCount = 0xBE - exp; - if ( shiftCount < 0 ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - if ( ! sign || ( ( exp == 0xFF ) && sig ) ) { - return INT64_C( 0x7FFFFFFFFFFFFFFF ); - } - return - INT64_C( 0x7FFFFFFFFFFFFFFF ) - 1; - } - if ( exp ) sig |= 0x00800000; - sig64 = (uint_fast64_t) sig<<40; - extra = 0; - if ( shiftCount ) { - sig64Extra = softfloat_shift64ExtraRightJam( sig64, 0, shiftCount ); - sig64 = sig64Extra.v; - extra = sig64Extra.extra; - } - return softfloat_roundPackToI64( sign, sig64, extra, roundingMode, exact ); - -} - diff --git a/softfloat/f32_to_i64_r_minMag.c b/softfloat/f32_to_i64_r_minMag.c deleted file mode 100755 index 33bff93..0000000 --- a/softfloat/f32_to_i64_r_minMag.c +++ /dev/null @@ -1,52 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -int_fast64_t f32_to_i64_r_minMag( float32_t a, bool exact ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - int_fast16_t exp; - uint_fast32_t sig; - bool sign; - int_fast16_t shiftCount; - uint_fast64_t sig64; - int_fast64_t absZ; - - uA.f = a; - uiA = uA.ui; - exp = expF32UI( uiA ); - sig = fracF32UI( uiA ); - if ( exp < 0x7F ) { - if ( exact && ( exp | sig ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return 0; - } - sign = signF32UI( uiA ); - shiftCount = 0xBE - exp; - if ( shiftCount <= 0 ) { - if ( uiA != packToF32UI( 1, 0xBE, 0 ) ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - if ( ! sign || ( ( exp == 0xFF ) && sig ) ) { - return INT64_C( 0x7FFFFFFFFFFFFFFF ); - } - } - return - INT64_C( 0x7FFFFFFFFFFFFFFF ) - 1; - } - sig |= 0x00800000; - sig64 = (uint_fast64_t) sig<<40; - absZ = sig64>>shiftCount; - shiftCount = 40 - shiftCount; - if ( - exact && ( shiftCount < 0 ) && (uint32_t) ( sig<<( shiftCount & 31 ) ) - ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return sign ? - absZ : absZ; - -} - diff --git a/softfloat/f32_to_ui32.c b/softfloat/f32_to_ui32.c deleted file mode 100755 index 3501db8..0000000 --- a/softfloat/f32_to_ui32.c +++ /dev/null @@ -1,33 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -uint_fast32_t f32_to_ui32( float32_t a, int_fast8_t roundingMode, bool exact ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool sign; - int_fast16_t exp; - uint_fast32_t sig; - uint_fast64_t sig64; - int_fast16_t shiftCount; - - uA.f = a; - uiA = uA.ui; - sign = signF32UI( uiA ); - exp = expF32UI( uiA ); - sig = fracF32UI( uiA ); - if ( exp ) sig |= 0x00800000; - sig64 = (uint_fast64_t) sig<<32; - shiftCount = 0xAF - exp; - if ( 0 < shiftCount ) { - sig64 = softfloat_shift64RightJam( sig64, shiftCount ); - } - return softfloat_roundPackToUI32( sign, sig64, roundingMode, exact ); - -} - diff --git a/softfloat/f32_to_ui32_r_minMag.c b/softfloat/f32_to_ui32_r_minMag.c deleted file mode 100755 index edd858d..0000000 --- a/softfloat/f32_to_ui32_r_minMag.c +++ /dev/null @@ -1,41 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -uint_fast32_t f32_to_ui32_r_minMag( float32_t a, bool exact ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - int_fast16_t exp; - uint_fast32_t sig; - int_fast16_t shiftCount; - uint_fast32_t z; - - uA.f = a; - uiA = uA.ui; - exp = expF32UI( uiA ); - sig = fracF32UI( uiA ); - if ( exp < 0x7F ) { - if ( exact && ( exp | sig ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return 0; - } - if ( signF32UI( uiA ) ) goto invalid; - shiftCount = 0x9E - exp; - if ( shiftCount < 0 ) goto invalid; - sig = ( sig | 0x00800000 )<<8; - z = sig>>shiftCount; - if ( exact && ( sig & ( ( (uint_fast32_t) 1< -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -uint_fast64_t f32_to_ui64( float32_t a, int_fast8_t roundingMode, bool exact ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - bool sign; - int_fast16_t exp; - uint_fast32_t sig; - int_fast16_t shiftCount; - uint_fast64_t sig64, extra; - struct uint64_extra sig64Extra; - - uA.f = a; - uiA = uA.ui; - sign = signF32UI( uiA ); - exp = expF32UI( uiA ); - sig = fracF32UI( uiA ); - shiftCount = 0xBE - exp; - if ( shiftCount < 0 ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - return UINT64_C( 0xFFFFFFFFFFFFFFFF ); - } - if ( exp ) sig |= 0x00800000; - sig64 = (uint_fast64_t) sig<<40; - extra = 0; - if ( shiftCount ) { - sig64Extra = softfloat_shift64ExtraRightJam( sig64, 0, shiftCount ); - sig64 = sig64Extra.v; - extra = sig64Extra.extra; - } - return - softfloat_roundPackToUI64( sign, sig64, extra, roundingMode, exact ); - -} - diff --git a/softfloat/f32_to_ui64_r_minMag.c b/softfloat/f32_to_ui64_r_minMag.c deleted file mode 100755 index 738d6b1..0000000 --- a/softfloat/f32_to_ui64_r_minMag.c +++ /dev/null @@ -1,45 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -uint_fast64_t f32_to_ui64_r_minMag( float32_t a, bool exact ) -{ - union ui32_f32 uA; - uint_fast32_t uiA; - int_fast16_t exp; - uint_fast32_t sig; - int_fast16_t shiftCount; - uint_fast64_t sig64, z; - - uA.f = a; - uiA = uA.ui; - exp = expF32UI( uiA ); - sig = fracF32UI( uiA ); - if ( exp < 0x7F ) { - if ( exact && ( exp | sig ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return 0; - } - if ( signF32UI( uiA ) ) goto invalid; - shiftCount = 0xBE - exp; - if ( shiftCount < 0 ) goto invalid; - sig |= 0x00800000; - sig64 = (uint_fast64_t) sig<<40; - z = sig64>>shiftCount; - shiftCount = 40 - shiftCount; - if ( - exact && ( shiftCount < 0 ) && (uint32_t) ( sig<<( shiftCount & 31 ) ) - ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return z; - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - return UINT64_C( 0xFFFFFFFFFFFFFFFF ); - -} - diff --git a/softfloat/f64_add.c b/softfloat/f64_add.c deleted file mode 100755 index 9ec4b5f..0000000 --- a/softfloat/f64_add.c +++ /dev/null @@ -1,29 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -float64_t f64_add( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool signA; - union ui64_f64 uB; - uint_fast64_t uiB; - bool signB; - float64_t ( *magsRoutine )( uint_fast64_t, uint_fast64_t, bool ); - - uA.f = a; - uiA = uA.ui; - signA = signF64UI( uiA ); - uB.f = b; - uiB = uB.ui; - signB = signF64UI( uiB ); - magsRoutine = - ( signA == signB ) ? softfloat_addMagsF64 : softfloat_subMagsF64; - return magsRoutine( uiA, uiB, signA ); - -} - diff --git a/softfloat/f64_div.c b/softfloat/f64_div.c deleted file mode 100755 index 9bc72b3..0000000 --- a/softfloat/f64_div.c +++ /dev/null @@ -1,104 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float64_t f64_div( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool signA; - int_fast16_t expA; - uint_fast64_t sigA; - union ui64_f64 uB; - uint_fast64_t uiB; - bool signB; - int_fast16_t expB; - uint_fast64_t sigB; - bool signZ; - struct exp16_sig64 normExpSig; - int_fast16_t expZ; - uint_fast64_t sigZ; - struct uint128 term, rem; - uint_fast64_t uiZ; - union ui64_f64 uZ; - - uA.f = a; - uiA = uA.ui; - signA = signF64UI( uiA ); - expA = expF64UI( uiA ); - sigA = fracF64UI( uiA ); - uB.f = b; - uiB = uB.ui; - signB = signF64UI( uiB ); - expB = expF64UI( uiB ); - sigB = fracF64UI( uiB ); - signZ = signA ^ signB; - if ( expA == 0x7FF ) { - if ( sigA ) goto propagateNaN; - if ( expB == 0x7FF ) { - if ( sigB ) goto propagateNaN; - goto invalid; - } - goto infinity; - } - if ( expB == 0x7FF ) { - if ( sigB ) goto propagateNaN; - goto zero; - } - if ( ! expB ) { - if ( ! sigB ) { - if ( ! ( expA | sigA ) ) goto invalid; - softfloat_raiseFlags( softfloat_flag_infinity ); - goto infinity; - } - normExpSig = softfloat_normSubnormalF64Sig( sigB ); - expB = normExpSig.exp; - sigB = normExpSig.sig; - } - if ( ! expA ) { - if ( ! sigA ) goto zero; - normExpSig = softfloat_normSubnormalF64Sig( sigA ); - expA = normExpSig.exp; - sigA = normExpSig.sig; - } - expZ = expA - expB + 0x3FD; - sigA = ( sigA | UINT64_C( 0x0010000000000000 ) )<<10; - sigB = ( sigB | UINT64_C( 0x0010000000000000 ) )<<11; - if ( sigB <= ( sigA + sigA ) ) { - ++expZ; - sigA >>= 1; - } - sigZ = softfloat_estimateDiv128To64( sigA, 0, sigB ); - if ( ( sigZ & 0x1FF ) <= 2 ) { - term = softfloat_mul64To128( sigB, sigZ ); - rem = softfloat_sub128( sigA, 0, term.v64, term.v0 ); - while ( UINT64_C( 0x8000000000000000 ) <= rem.v64 ) { - --sigZ; - rem = softfloat_add128( rem.v64, rem.v0, 0, sigB ); - } - sigZ |= ( rem.v0 != 0 ); - } - return softfloat_roundPackToF64( signZ, expZ, sigZ ); - propagateNaN: - uiZ = softfloat_propagateNaNF64UI( uiA, uiB ); - goto uiZ; - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF64UI; - goto uiZ; - infinity: - uiZ = packToF64UI( signZ, 0x7FF, 0 ); - goto uiZ; - zero: - uiZ = packToF64UI( signZ, 0, 0 ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f64_eq.c b/softfloat/f64_eq.c deleted file mode 100755 index 925aabc..0000000 --- a/softfloat/f64_eq.c +++ /dev/null @@ -1,35 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -bool f64_eq( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - union ui64_f64 uB; - uint_fast64_t uiB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF64UI( uiA ) == 0x7FF ) && fracF64UI( uiA ) ) - || ( ( expF64UI( uiB ) == 0x7FF ) && fracF64UI( uiB ) ) - ) { - if ( - softfloat_isSigNaNF64UI( uiA ) || softfloat_isSigNaNF64UI( uiB ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - return false; - } - return - ( uiA == uiB ) || ! ( ( uiA | uiB ) & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ); - -} - diff --git a/softfloat/f64_eq_signaling.c b/softfloat/f64_eq_signaling.c deleted file mode 100755 index 7a54dc1..0000000 --- a/softfloat/f64_eq_signaling.c +++ /dev/null @@ -1,30 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -bool f64_eq_signaling( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - union ui64_f64 uB; - uint_fast64_t uiB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF64UI( uiA ) == 0x7FF ) && fracF64UI( uiA ) ) - || ( ( expF64UI( uiB ) == 0x7FF ) && fracF64UI( uiB ) ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - return false; - } - return - ( uiA == uiB ) || ! ( ( uiA | uiB ) & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ); - -} - diff --git a/softfloat/f64_isSignalingNaN.c b/softfloat/f64_isSignalingNaN.c deleted file mode 100755 index d720ac1..0000000 --- a/softfloat/f64_isSignalingNaN.c +++ /dev/null @@ -1,16 +0,0 @@ - -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -bool f64_isSignalingNaN( float64_t a ) -{ - union ui64_f64 uA; - - uA.f = a; - return softfloat_isSigNaNF64UI( uA.ui ); - -} - diff --git a/softfloat/f64_le.c b/softfloat/f64_le.c deleted file mode 100755 index e6c5caf..0000000 --- a/softfloat/f64_le.c +++ /dev/null @@ -1,35 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -bool f64_le( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - union ui64_f64 uB; - uint_fast64_t uiB; - bool signA, signB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF64UI( uiA ) == 0x7FF ) && fracF64UI( uiA ) ) - || ( ( expF64UI( uiB ) == 0x7FF ) && fracF64UI( uiB ) ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - return false; - } - signA = signF64UI( uiA ); - signB = signF64UI( uiB ); - return - ( signA != signB ) - ? signA || ! ( ( uiA | uiB ) & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ) - : ( uiA == uiB ) || ( signA ^ ( uiA < uiB ) ); - -} - diff --git a/softfloat/f64_le_quiet.c b/softfloat/f64_le_quiet.c deleted file mode 100755 index e9b7ede..0000000 --- a/softfloat/f64_le_quiet.c +++ /dev/null @@ -1,40 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -bool f64_le_quiet( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - union ui64_f64 uB; - uint_fast64_t uiB; - bool signA, signB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF64UI( uiA ) == 0x7FF ) && fracF64UI( uiA ) ) - || ( ( expF64UI( uiB ) == 0x7FF ) && fracF64UI( uiB ) ) - ) { - if ( - softfloat_isSigNaNF64UI( uiA ) || softfloat_isSigNaNF64UI( uiB ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - return false; - } - signA = signF64UI( uiA ); - signB = signF64UI( uiB ); - return - ( signA != signB ) - ? signA || ! ( ( uiA | uiB ) & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ) - : ( uiA == uiB ) || ( signA ^ ( uiA < uiB ) ); - -} - diff --git a/softfloat/f64_lt.c b/softfloat/f64_lt.c deleted file mode 100755 index 1b2f696..0000000 --- a/softfloat/f64_lt.c +++ /dev/null @@ -1,35 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -bool f64_lt( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - union ui64_f64 uB; - uint_fast64_t uiB; - bool signA, signB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF64UI( uiA ) == 0x7FF ) && fracF64UI( uiA ) ) - || ( ( expF64UI( uiB ) == 0x7FF ) && fracF64UI( uiB ) ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - return false; - } - signA = signF64UI( uiA ); - signB = signF64UI( uiB ); - return - ( signA != signB ) - ? signA && ( ( uiA | uiB ) & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ) - : ( uiA != uiB ) && ( signA ^ ( uiA < uiB ) ); - -} - diff --git a/softfloat/f64_lt_quiet.c b/softfloat/f64_lt_quiet.c deleted file mode 100755 index f27e6da..0000000 --- a/softfloat/f64_lt_quiet.c +++ /dev/null @@ -1,40 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -bool f64_lt_quiet( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - union ui64_f64 uB; - uint_fast64_t uiB; - bool signA, signB; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - if ( - ( ( expF64UI( uiA ) == 0x7FF ) && fracF64UI( uiA ) ) - || ( ( expF64UI( uiB ) == 0x7FF ) && fracF64UI( uiB ) ) - ) { - if ( - softfloat_isSigNaNF64UI( uiA ) || softfloat_isSigNaNF64UI( uiB ) - ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - return false; - } - signA = signF64UI( uiA ); - signB = signF64UI( uiB ); - return - ( signA != signB ) - ? signA && ( ( uiA | uiB ) & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ) - : ( uiA != uiB ) && ( signA ^ ( uiA < uiB ) ); - -} - diff --git a/softfloat/f64_mul.c b/softfloat/f64_mul.c deleted file mode 100755 index 4b5dc4e..0000000 --- a/softfloat/f64_mul.c +++ /dev/null @@ -1,91 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float64_t f64_mul( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool signA; - int_fast16_t expA; - uint_fast64_t sigA; - union ui64_f64 uB; - uint_fast64_t uiB; - bool signB; - int_fast16_t expB; - uint_fast64_t sigB; - bool signZ; - uint_fast64_t magBits; - struct exp16_sig64 normExpSig; - int_fast16_t expZ; - struct uint128 sigZ128; - uint_fast64_t sigZ, uiZ; - union ui64_f64 uZ; - - uA.f = a; - uiA = uA.ui; - signA = signF64UI( uiA ); - expA = expF64UI( uiA ); - sigA = fracF64UI( uiA ); - uB.f = b; - uiB = uB.ui; - signB = signF64UI( uiB ); - expB = expF64UI( uiB ); - sigB = fracF64UI( uiB ); - signZ = signA ^ signB; - if ( expA == 0x7FF ) { - if ( sigA || ( ( expB == 0x7FF ) && sigB ) ) goto propagateNaN; - magBits = expB | sigB; - goto infArg; - } - if ( expB == 0x7FF ) { - if ( sigB ) goto propagateNaN; - magBits = expA | sigA; - goto infArg; - } - if ( ! expA ) { - if ( ! sigA ) goto zero; - normExpSig = softfloat_normSubnormalF64Sig( sigA ); - expA = normExpSig.exp; - sigA = normExpSig.sig; - } - if ( ! expB ) { - if ( ! sigB ) goto zero; - normExpSig = softfloat_normSubnormalF64Sig( sigB ); - expB = normExpSig.exp; - sigB = normExpSig.sig; - } - expZ = expA + expB - 0x3FF; - sigA = ( sigA | UINT64_C( 0x0010000000000000 ) )<<10; - sigB = ( sigB | UINT64_C( 0x0010000000000000 ) )<<11; - sigZ128 = softfloat_mul64To128( sigA, sigB ); - sigZ = sigZ128.v64 | ( sigZ128.v0 != 0 ); - if ( sigZ < UINT64_C( 0x4000000000000000 ) ) { - --expZ; - sigZ <<= 1; - } - return softfloat_roundPackToF64( signZ, expZ, sigZ ); - propagateNaN: - uiZ = softfloat_propagateNaNF64UI( uiA, uiB ); - goto uiZ; - infArg: - if ( ! magBits ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF64UI; - } else { - uiZ = packToF64UI( signZ, 0x7FF, 0 ); - } - goto uiZ; - zero: - uiZ = packToF64UI( signZ, 0, 0 ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f64_mulAdd.c b/softfloat/f64_mulAdd.c deleted file mode 100755 index fa1669a..0000000 --- a/softfloat/f64_mulAdd.c +++ /dev/null @@ -1,25 +0,0 @@ - -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -float64_t f64_mulAdd( float64_t a, float64_t b, float64_t c ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - union ui64_f64 uB; - uint_fast64_t uiB; - union ui64_f64 uC; - uint_fast64_t uiC; - - uA.f = a; - uiA = uA.ui; - uB.f = b; - uiB = uB.ui; - uC.f = c; - uiC = uC.ui; - return softfloat_mulAddF64( 0, uiA, uiB, uiC ); - -} - diff --git a/softfloat/f64_rem.c b/softfloat/f64_rem.c deleted file mode 100755 index 08fcd78..0000000 --- a/softfloat/f64_rem.c +++ /dev/null @@ -1,113 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float64_t f64_rem( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool signA; - int_fast16_t expA; - uint_fast64_t sigA; - union ui64_f64 uB; - uint_fast64_t uiB; - bool signB; - int_fast16_t expB; - uint_fast64_t sigB; - struct exp16_sig64 normExpSig; - int_fast16_t expDiff; - uint_fast64_t q, alternateSigA; - uint64_t sigMean; - bool signZ; - uint_fast64_t uiZ; - union ui64_f64 uZ; - - uA.f = a; - uiA = uA.ui; - signA = signF64UI( uiA ); - expA = expF64UI( uiA ); - sigA = fracF64UI( uiA ); - uB.f = b; - uiB = uB.ui; - signB = signF64UI( uiB ); - expB = expF64UI( uiB ); - sigB = fracF64UI( uiB ); - if ( expA == 0x7FF ) { - if ( sigA || ( ( expB == 0x7FF ) && sigB ) ) goto propagateNaN; - goto invalid; - } - if ( expB == 0x7FF ) { - if ( sigB ) goto propagateNaN; - return a; - } - if ( ! expB ) { - if ( ! sigB ) goto invalid; - normExpSig = softfloat_normSubnormalF64Sig( sigB ); - expB = normExpSig.exp; - sigB = normExpSig.sig; - } - if ( ! expA ) { - if ( ! sigA ) return a; - normExpSig = softfloat_normSubnormalF64Sig( sigA ); - expA = normExpSig.exp; - sigA = normExpSig.sig; - } - expDiff = expA - expB; - sigA = ( sigA | UINT64_C( 0x0010000000000000 ) )<<11; - sigB = ( sigB | UINT64_C( 0x0010000000000000 ) )<<11; - if ( expDiff < 0 ) { - if ( expDiff < -1 ) return a; - sigA >>= 1; - } - q = ( sigB <= sigA ); - if ( q ) sigA -= sigB; - expDiff -= 64; - while ( 0 < expDiff ) { - q = softfloat_estimateDiv128To64( sigA, 0, sigB ); - q = ( 2 < q ) ? q - 2 : 0; - sigA = - ( ( sigB>>2 ) * q ); - expDiff -= 62; - } - expDiff += 64; - if ( 0 < expDiff ) { - q = softfloat_estimateDiv128To64( sigA, 0, sigB ); - q = ( 2 < q ) ? q - 2 : 0; - q >>= 64 - expDiff; - sigB >>= 2; - sigA = ( ( sigA>>1 )<<( expDiff - 1 ) ) - sigB * q; - } else { - sigA >>= 2; - sigB >>= 2; - } - do { - alternateSigA = sigA; - ++q; - sigA -= sigB; - } while ( sigA < UINT64_C( 0x8000000000000000 ) ); - sigMean = sigA + alternateSigA; - if ( - ( UINT64_C( 0x8000000000000000 ) <= sigMean ) - || ( ! sigMean && ( q & 1 ) ) - ) { - sigA = alternateSigA; - } - signZ = ( UINT64_C( 0x8000000000000000 ) <= sigA ); - if ( signZ ) sigA = - sigA; - return softfloat_normRoundPackToF64( signA ^ signZ, expB, sigA ); - propagateNaN: - uiZ = softfloat_propagateNaNF64UI( uiA, uiB ); - goto uiZ; - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF64UI; - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f64_roundToInt.c b/softfloat/f64_roundToInt.c deleted file mode 100755 index ef16dfa..0000000 --- a/softfloat/f64_roundToInt.c +++ /dev/null @@ -1,80 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float64_t f64_roundToInt( float64_t a, int_fast8_t roundingMode, bool exact ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - int_fast16_t expA; - uint_fast64_t uiZ; - bool signA; - uint_fast64_t lastBitMask, roundBitsMask; - union ui64_f64 uZ; - - uA.f = a; - uiA = uA.ui; - expA = expF64UI( uiA ); - if ( 0x433 <= expA ) { - if ( ( expA == 0x7FF ) && fracF64UI( uiA ) ) { - uiZ = softfloat_propagateNaNF64UI( uiA, 0 ); - goto uiZ; - } - return a; - } - if ( expA <= 0x3FE ) { - if ( ! ( uiA & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ) ) return a; - if ( exact ) softfloat_exceptionFlags |= softfloat_flag_inexact; - signA = signF64UI( uiA ); - switch ( roundingMode ) { - case softfloat_round_nearest_even: - if ( ( expA == 0x3FE ) && fracF64UI( uiA ) ) { - uiZ = packToF64UI( signA, 0x3FF, 0 ); - goto uiZ; - } - break; - case softfloat_round_min: - uiZ = signA ? UINT64_C( 0xBFF0000000000000 ) : 0; - goto uiZ; - case softfloat_round_max: - uiZ = - signA ? UINT64_C( 0x8000000000000000 ) - : UINT64_C( 0x3FF0000000000000 ); - goto uiZ; - case softfloat_round_nearest_maxMag: - if ( expA == 0x3FE ) { - uiZ = packToF64UI( signA, 0x3FF, 0 ); - goto uiZ; - } - break; - } - uiZ = packToF64UI( signA, 0, 0 ); - goto uiZ; - } - lastBitMask = (uint_fast64_t) 1<<( 0x433 - expA ); - roundBitsMask = lastBitMask - 1; - uiZ = uiA; - if ( roundingMode == softfloat_round_nearest_maxMag ) { - uiZ += lastBitMask>>1; - } else if ( roundingMode == softfloat_round_nearest_even ) { - uiZ += lastBitMask>>1; - if ( ! ( uiZ & roundBitsMask ) ) uiZ &= ~ lastBitMask; - } else if ( roundingMode != softfloat_round_minMag ) { - if ( signF64UI( uiZ ) ^ ( roundingMode == softfloat_round_max ) ) { - uiZ += roundBitsMask; - } - } - uiZ &= ~ roundBitsMask; - if ( exact && ( uiZ != uiA ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f64_sqrt.c b/softfloat/f64_sqrt.c deleted file mode 100755 index cd91010..0000000 --- a/softfloat/f64_sqrt.c +++ /dev/null @@ -1,74 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float64_t f64_sqrt( float64_t a ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool signA; - int_fast16_t expA; - uint_fast64_t sigA, uiZ; - struct exp16_sig64 normExpSig; - int_fast16_t expZ; - uint_fast32_t sigZ32; - uint_fast64_t sigZ; - struct uint128 term, rem; - union ui64_f64 uZ; - - uA.f = a; - uiA = uA.ui; - signA = signF64UI( uiA ); - expA = expF64UI( uiA ); - sigA = fracF64UI( uiA ); - if ( expA == 0x7FF ) { - if ( sigA ) { - uiZ = softfloat_propagateNaNF64UI( uiA, 0 ); - goto uiZ; - } - if ( ! signA ) return a; - goto invalid; - } - if ( signA ) { - if ( ! ( expA | sigA ) ) return a; - goto invalid; - } - if ( ! expA ) { - if ( ! sigA ) return a; - normExpSig = softfloat_normSubnormalF64Sig( sigA ); - expA = normExpSig.exp; - sigA = normExpSig.sig; - } - expZ = ( ( expA - 0x3FF )>>1 ) + 0x3FE; - sigA |= UINT64_C( 0x0010000000000000 ); - sigZ32 = softfloat_estimateSqrt32( expA, sigA>>21 ); - sigA <<= 9 - ( expA & 1 ); - sigZ = - softfloat_estimateDiv128To64( sigA, 0, (uint_fast64_t) sigZ32<<32 ) - + ( (uint_fast64_t) sigZ32<<30 ); - if ( ( sigZ & 0x1FF ) <= 5 ) { - term = softfloat_mul64To128( sigZ, sigZ ); - rem = softfloat_sub128( sigA, 0, term.v64, term.v0 ); - while ( UINT64_C( 0x8000000000000000 ) <= rem.v64 ) { - --sigZ; - rem = - softfloat_add128( - rem.v64, rem.v0, sigZ>>63, (uint64_t) ( sigZ<<1 ) ); - } - sigZ |= ( ( rem.v64 | rem.v0 ) != 0 ); - } - return softfloat_roundPackToF64( 0, expZ, sigZ ); - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF64UI; - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f64_sub.c b/softfloat/f64_sub.c deleted file mode 100755 index 38bd574..0000000 --- a/softfloat/f64_sub.c +++ /dev/null @@ -1,29 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -float64_t f64_sub( float64_t a, float64_t b ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool signA; - union ui64_f64 uB; - uint_fast64_t uiB; - bool signB; - float64_t ( *magsRoutine )( uint_fast64_t, uint_fast64_t, bool ); - - uA.f = a; - uiA = uA.ui; - signA = signF64UI( uiA ); - uB.f = b; - uiB = uB.ui; - signB = signF64UI( uiB ); - magsRoutine = - ( signA == signB ) ? softfloat_subMagsF64 : softfloat_addMagsF64; - return magsRoutine( uiA, uiB, signA ); - -} - diff --git a/softfloat/f64_to_f32.c b/softfloat/f64_to_f32.c deleted file mode 100755 index 395d6c6..0000000 --- a/softfloat/f64_to_f32.c +++ /dev/null @@ -1,43 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float32_t f64_to_f32( float64_t a ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool sign; - int_fast16_t exp; - uint_fast64_t sig; - uint_fast32_t uiZ, sig32; - union ui32_f32 uZ; - - uA.f = a; - uiA = uA.ui; - sign = signF64UI( uiA ); - exp = expF64UI( uiA ); - sig = fracF64UI( uiA ); - if ( exp == 0x7FF ) { - uiZ = - sig ? softfloat_commonNaNToF32UI( - softfloat_f64UIToCommonNaN( uiA ) ) - : packToF32UI( sign, 0xFF, 0 ); - goto uiZ; - } - sig32 = softfloat_shortShift64RightJam( sig, 22 ); - if ( ! ( exp | sig32 ) ) { - uiZ = packToF32UI( sign, 0, 0 ); - goto uiZ; - } - return softfloat_roundPackToF32( sign, exp - 0x381, sig32 | 0x40000000 ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/f64_to_i32.c b/softfloat/f64_to_i32.c deleted file mode 100755 index 0778a86..0000000 --- a/softfloat/f64_to_i32.c +++ /dev/null @@ -1,30 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -int_fast32_t f64_to_i32( float64_t a, int_fast8_t roundingMode, bool exact ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool sign; - int_fast16_t exp; - uint_fast64_t sig; - int_fast16_t shiftCount; - - uA.f = a; - uiA = uA.ui; - sign = signF64UI( uiA ); - exp = expF64UI( uiA ); - sig = fracF64UI( uiA ); - if ( ( exp == 0x7FF ) && sig ) sign = 0; - if ( exp ) sig |= UINT64_C( 0x0010000000000000 ); - shiftCount = 0x42C - exp; - if ( 0 < shiftCount ) sig = softfloat_shift64RightJam( sig, shiftCount ); - return softfloat_roundPackToI32( sign, sig, roundingMode, exact ); - -} - diff --git a/softfloat/f64_to_i32_r_minMag.c b/softfloat/f64_to_i32_r_minMag.c deleted file mode 100755 index 39246c2..0000000 --- a/softfloat/f64_to_i32_r_minMag.c +++ /dev/null @@ -1,50 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -int_fast32_t f64_to_i32_r_minMag( float64_t a, bool exact ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - int_fast16_t exp; - uint_fast64_t sig; - bool sign; - int_fast16_t shiftCount; - uint_fast32_t absZ; - union { uint32_t ui; int32_t i; } uZ; - int_fast32_t z; - - uA.f = a; - uiA = uA.ui; - exp = expF64UI( uiA ); - sig = fracF64UI( uiA ); - if ( exp < 0x3FF ) { - if ( exact && ( exp | sig ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return 0; - } - sign = signF64UI( uiA ); - if ( 0x41E < exp ) { - if ( ( exp == 0x7FF ) && sig ) sign = 0; - goto invalid; - } - sig |= UINT64_C( 0x0010000000000000 ); - shiftCount = 0x433 - exp; - absZ = sig>>shiftCount; - uZ.ui = sign ? - absZ : absZ; - z = uZ.i; - if ( ( z < 0 ) != sign ) goto invalid; - if ( exact && ( (uint_fast64_t) absZ< -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -int_fast64_t f64_to_i64( float64_t a, int_fast8_t roundingMode, bool exact ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool sign; - int_fast16_t exp; - uint_fast64_t sig; - int_fast16_t shiftCount; - struct uint64_extra sigExtra; - - uA.f = a; - uiA = uA.ui; - sign = signF64UI( uiA ); - exp = expF64UI( uiA ); - sig = fracF64UI( uiA ); - if ( exp ) sig |= UINT64_C( 0x0010000000000000 ); - shiftCount = 0x433 - exp; - if ( shiftCount <= 0 ) { - if ( 0x43E < exp ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - return - ! sign - || ( ( exp == 0x7FF ) - && ( sig != UINT64_C( 0x0010000000000000 ) ) ) - ? INT64_C( 0x7FFFFFFFFFFFFFFF ) - : - INT64_C( 0x7FFFFFFFFFFFFFFF ) - 1; - } - sigExtra.v = sig<<( - shiftCount ); - sigExtra.extra = 0; - } else { - sigExtra = softfloat_shift64ExtraRightJam( sig, 0, shiftCount ); - } - return - softfloat_roundPackToI64( - sign, sigExtra.v, sigExtra.extra, roundingMode, exact ); - -} - diff --git a/softfloat/f64_to_i64_r_minMag.c b/softfloat/f64_to_i64_r_minMag.c deleted file mode 100755 index 525705b..0000000 --- a/softfloat/f64_to_i64_r_minMag.c +++ /dev/null @@ -1,52 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -int_fast64_t f64_to_i64_r_minMag( float64_t a, bool exact ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool sign; - int_fast16_t exp; - uint_fast64_t sig; - int_fast16_t shiftCount; - int_fast64_t absZ; - - uA.f = a; - uiA = uA.ui; - sign = signF64UI( uiA ); - exp = expF64UI( uiA ); - sig = fracF64UI( uiA ); - shiftCount = exp - 0x433; - if ( 0 <= shiftCount ) { - if ( 0x43E <= exp ) { - if ( uiA != packToF64UI( 1, 0x43E, 0 ) ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - if ( ! sign || ( ( exp == 0x7FF ) && sig ) ) { - return INT64_C( 0x7FFFFFFFFFFFFFFF ); - } - } - return - INT64_C( 0x7FFFFFFFFFFFFFFF ) - 1; - } - sig |= UINT64_C( 0x0010000000000000 ); - absZ = sig<>( - shiftCount ); - if ( exact && (uint64_t) ( sig<<( shiftCount & 63 ) ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - } - return sign ? - absZ : absZ; - -} - diff --git a/softfloat/f64_to_ui32.c b/softfloat/f64_to_ui32.c deleted file mode 100755 index b186605..0000000 --- a/softfloat/f64_to_ui32.c +++ /dev/null @@ -1,29 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -uint_fast32_t f64_to_ui32( float64_t a, int_fast8_t roundingMode, bool exact ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool sign; - int_fast16_t exp; - uint_fast64_t sig; - int_fast16_t shiftCount; - - uA.f = a; - uiA = uA.ui; - sign = signF64UI( uiA ); - exp = expF64UI( uiA ); - sig = fracF64UI( uiA ); - if ( exp ) sig |= UINT64_C( 0x0010000000000000 ); - shiftCount = 0x42C - exp; - if ( 0 < shiftCount ) sig = softfloat_shift64RightJam( sig, shiftCount ); - return softfloat_roundPackToUI32( sign, sig, roundingMode, exact ); - -} - diff --git a/softfloat/f64_to_ui32_r_minMag.c b/softfloat/f64_to_ui32_r_minMag.c deleted file mode 100755 index 9f1dd4d..0000000 --- a/softfloat/f64_to_ui32_r_minMag.c +++ /dev/null @@ -1,40 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -uint_fast32_t f64_to_ui32_r_minMag( float64_t a, bool exact ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - int_fast16_t exp; - uint_fast64_t sig; - int_fast16_t shiftCount; - uint_fast32_t z; - - uA.f = a; - uiA = uA.ui; - exp = expF64UI( uiA ); - sig = fracF64UI( uiA ); - if ( exp < 0x3FF ) { - if ( exact && ( exp | sig ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return 0; - } - if ( signF64UI( uiA ) || ( 0x41E < exp ) ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - return 0xFFFFFFFF; - } - sig |= UINT64_C( 0x0010000000000000 ); - shiftCount = 0x433 - exp; - z = sig>>shiftCount; - if ( exact && ( (uint_fast64_t) z< -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -uint_fast64_t f64_to_ui64( float64_t a, int_fast8_t roundingMode, bool exact ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - bool sign; - int_fast16_t exp; - uint_fast64_t sig; - int_fast16_t shiftCount; - struct uint64_extra sigExtra; - - uA.f = a; - uiA = uA.ui; - sign = signF64UI( uiA ); - exp = expF64UI( uiA ); - sig = fracF64UI( uiA ); - if ( exp ) sig |= UINT64_C( 0x0010000000000000 ); - shiftCount = 0x433 - exp; - if ( shiftCount <= 0 ) { - if ( 0x43E < exp ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - return UINT64_C( 0xFFFFFFFFFFFFFFFF ); - } - sigExtra.v = sig<<( - shiftCount ); - sigExtra.extra = 0; - } else { - sigExtra = softfloat_shift64ExtraRightJam( sig, 0, shiftCount ); - } - return - softfloat_roundPackToUI64( - sign, sigExtra.v, sigExtra.extra, roundingMode, exact ); - -} - diff --git a/softfloat/f64_to_ui64_r_minMag.c b/softfloat/f64_to_ui64_r_minMag.c deleted file mode 100755 index a66d3ff..0000000 --- a/softfloat/f64_to_ui64_r_minMag.c +++ /dev/null @@ -1,45 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -uint_fast64_t f64_to_ui64_r_minMag( float64_t a, bool exact ) -{ - union ui64_f64 uA; - uint_fast64_t uiA; - int_fast16_t exp; - uint_fast64_t sig; - int_fast16_t shiftCount; - uint_fast64_t z; - - uA.f = a; - uiA = uA.ui; - exp = expF64UI( uiA ); - sig = fracF64UI( uiA ); - if ( exp < 0x3FF ) { - if ( exact && ( exp | sig ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return 0; - } - if ( signF64UI( uiA ) ) goto invalid; - shiftCount = exp - 0x433; - if ( 0 <= shiftCount ) { - if ( 0x43E < exp ) goto invalid; - z = ( sig | UINT64_C( 0x0010000000000000 ) )<>( - shiftCount ); - if ( exact && (uint64_t) ( sig<<( shiftCount & 63 ) ) ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - } - return z; - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - return UINT64_C( 0xFFFFFFFFFFFFFFFF ); - -} - diff --git a/softfloat/i32_to_f32.c b/softfloat/i32_to_f32.c deleted file mode 100755 index f51facd..0000000 --- a/softfloat/i32_to_f32.c +++ /dev/null @@ -1,21 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -float32_t i32_to_f32( int_fast32_t a ) -{ - bool sign; - union ui32_f32 uZ; - - sign = ( a < 0 ); - if ( ! ( a & 0x7FFFFFFF ) ) { - uZ.ui = sign ? packToF32UI( 1, 0x9E, 0 ) : 0; - return uZ.f; - } - return softfloat_normRoundPackToF32( sign, 0x9C, sign ? - a : a ); - -} - diff --git a/softfloat/i32_to_f64.c b/softfloat/i32_to_f64.c deleted file mode 100755 index d42cbe8..0000000 --- a/softfloat/i32_to_f64.c +++ /dev/null @@ -1,31 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -float64_t i32_to_f64( int_fast32_t a ) -{ - uint_fast64_t uiZ; - bool sign; - uint_fast32_t absA; - int shiftCount; - union ui64_f64 uZ; - - if ( ! a ) { - uiZ = 0; - } else { - sign = ( a < 0 ); - absA = sign ? - a : a; - shiftCount = softfloat_countLeadingZeros32( absA ) + 21; - uiZ = - packToF64UI( - sign, 0x432 - shiftCount, (uint_fast64_t) absA< -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -float32_t i64_to_f32( int_fast64_t a ) -{ - bool sign; - uint_fast64_t absA; - int shiftCount; - union ui32_f32 u; - uint_fast32_t sig; - - sign = ( a < 0 ); - absA = sign ? - (uint_fast64_t) a : a; - shiftCount = softfloat_countLeadingZeros64( absA ) - 40; - if ( 0 <= shiftCount ) { - u.ui = - a ? packToF32UI( - sign, 0x95 - shiftCount, (uint_fast32_t) absA< -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -float64_t i64_to_f64( int_fast64_t a ) -{ - bool sign; - union ui64_f64 uZ; - - sign = ( a < 0 ); - if ( ! ( a & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ) ) { - uZ.ui = sign ? packToF64UI( 1, 0x43E, 0 ) : 0; - return uZ.f; - } - return softfloat_normRoundPackToF64( sign, 0x43C, sign ? - a : a ); - -} - diff --git a/softfloat/internals.h b/softfloat/internals.h deleted file mode 100755 index 5e6fd76..0000000 --- a/softfloat/internals.h +++ /dev/null @@ -1,232 +0,0 @@ - -/*** UPDATE COMMENTS. ***/ - -#include "softfloat_types.h" - -union ui32_f32 { uint32_t ui; float32_t f; }; -union ui64_f64 { uint64_t ui; float64_t f; }; -#ifdef LITTLEENDIAN -union ui128_f128 { uint64_t ui0, ui64; float128_t f; }; -#else -union ui128_f128 { uint64_t ui64, ui0; float128_t f; }; -#endif - -enum { - softfloat_mulAdd_subC = 1, - softfloat_mulAdd_subProd = 2 -}; - -uint_fast32_t - softfloat_roundPackToUI32( bool, uint_fast64_t, int_fast8_t, bool ); -uint_fast64_t - softfloat_roundPackToUI64( - bool, uint_fast64_t, uint_fast64_t, int_fast8_t, bool ); -/*---------------------------------------------------------------------------- -| Takes a 64-bit fixed-point value `absZ' with binary point between bits 6 -| and 7, and returns the properly rounded 32-bit integer corresponding to the -| input. If `zSign' is 1, the input is negated before being converted to an -| integer. Bit 63 of `absZ' must be zero. Ordinarily, the fixed-point input -| is simply rounded to an integer, with the inexact exception raised if the -| input cannot be represented exactly as an integer. However, if the fixed- -| point input is too large, the invalid exception is raised and the largest -| positive or negative integer is returned. -*----------------------------------------------------------------------------*/ -int_fast32_t - softfloat_roundPackToI32( bool, uint_fast64_t, int_fast8_t, bool ); -/*---------------------------------------------------------------------------- -| Takes the 128-bit fixed-point value formed by concatenating `absZ0' and -| `absZ1', with binary point between bits 63 and 64 (between the input words), -| and returns the properly rounded 64-bit integer corresponding to the input. -| If `zSign' is 1, the input is negated before being converted to an integer. -| Ordinarily, the fixed-point input is simply rounded to an integer, with -| the inexact exception raised if the input cannot be represented exactly as -| an integer. However, if the fixed-point input is too large, the invalid -| exception is raised and the largest positive or negative integer is -| returned. -*----------------------------------------------------------------------------*/ -int_fast64_t - softfloat_roundPackToI64( - bool, uint_fast64_t, uint_fast64_t, int_fast8_t, bool ); - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is a NaN; -| otherwise, returns 0. -*----------------------------------------------------------------------------*/ -#define isNaNF32UI( ui ) (0xFF000000<(uint32_t)((uint_fast32_t)(ui)<<1)) -/*---------------------------------------------------------------------------- -| Returns the sign bit of the single-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ -#define signF32UI( a ) ((bool)((uint32_t)(a)>>31)) -/*---------------------------------------------------------------------------- -| Returns the exponent bits of the single-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ -#define expF32UI( a ) ((int_fast16_t)((a)>>23)&0xFF) -/*---------------------------------------------------------------------------- -| Returns the fraction bits of the single-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ -#define fracF32UI( a ) ((a)&0x007FFFFF) -/*---------------------------------------------------------------------------- -| Packs the sign `zSign', exponent `zExp', and significand `zSig' into a -| single-precision floating-point value, returning the result. After being -| shifted into the proper positions, the three fields are simply added -| together to form the result. This means that any integer portion of `zSig' -| will be added into the exponent. Since a properly normalized significand -| will have an integer portion equal to 1, the `zExp' input should be 1 less -| than the desired result exponent whenever `zSig' is a complete, normalized -| significand. -*----------------------------------------------------------------------------*/ -#define packToF32UI( sign, exp, sig ) (((uint32_t)(sign)<<31)+((uint32_t)(exp)<<23)+(sig)) - -/*---------------------------------------------------------------------------- -| Normalizes the subnormal single-precision floating-point value represented -| by the denormalized significand `aSig'. The normalized exponent and -| significand are stored at the locations pointed to by `zExpPtr' and -| `zSigPtr', respectively. -*----------------------------------------------------------------------------*/ -struct exp16_sig32 { int_fast16_t exp; uint_fast32_t sig; }; -struct exp16_sig32 softfloat_normSubnormalF32Sig( uint_fast32_t ); - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and significand `zSig', and returns the proper single-precision floating- -| point value corresponding to the abstract input. Ordinarily, the abstract -| value is simply rounded and packed into the single-precision format, with -| the inexact exception raised if the abstract input cannot be represented -| exactly. However, if the abstract value is too large, the overflow and -| inexact exceptions are raised and an infinity or maximal finite value is -| returned. If the abstract value is too small, the input value is rounded to -| a subnormal number, and the underflow and inexact exceptions are raised if -| the abstract input cannot be represented exactly as a subnormal single- -| precision floating-point number. -| The input significand `zSig' has its binary point between bits 30 -| and 29, which is 7 bits to the left of the usual location. This shifted -| significand must be normalized or smaller. If `zSig' is not normalized, -| `zExp' must be 0; in that case, the result returned is a subnormal number, -| and it must not require rounding. In the usual case that `zSig' is -| normalized, `zExp' must be 1 less than the ``true'' floating-point exponent. -| The handling of underflow and overflow follows the IEC/IEEE Standard for -| Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ -float32_t softfloat_roundPackToF32( bool, int_fast16_t, uint_fast32_t ); -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and significand `zSig', and returns the proper single-precision floating- -| point value corresponding to the abstract input. This routine is just like -| `roundAndPackFloat32' except that `zSig' does not have to be normalized. -| Bit 31 of `zSig' must be zero, and `zExp' must be 1 less than the ``true'' -| floating-point exponent. -*----------------------------------------------------------------------------*/ -float32_t softfloat_normRoundPackToF32( bool, int_fast16_t, uint_fast32_t ); - -/*---------------------------------------------------------------------------- -| Returns the result of adding the absolute values of the single-precision -| floating-point values `a' and `b'. If `zSign' is 1, the sum is negated -| before being returned. `zSign' is ignored if the result is a NaN. -| The addition is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ -float32_t softfloat_addMagsF32( uint_fast32_t, uint_fast32_t, bool ); -/*---------------------------------------------------------------------------- -| Returns the result of subtracting the absolute values of the single- -| precision floating-point values `a' and `b'. If `zSign' is 1, the -| difference is negated before being returned. `zSign' is ignored if the -| result is a NaN. The subtraction is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ -float32_t softfloat_subMagsF32( uint_fast32_t, uint_fast32_t, bool ); -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -float32_t - softfloat_mulAddF32( int, uint_fast32_t, uint_fast32_t, uint_fast32_t ); - -/*---------------------------------------------------------------------------- -| Returns 1 if the double-precision floating-point value `a' is a NaN; -| otherwise, returns 0. -*----------------------------------------------------------------------------*/ -#define isNaNF64UI( ui ) (UINT64_C(0xFFE0000000000000)<(uint64_t)((uint_fast64_t)(ui)<<1)) -/*---------------------------------------------------------------------------- -| Returns the sign bit of the double-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ -#define signF64UI( a ) ((bool)((uint64_t)(a)>>63)) -/*---------------------------------------------------------------------------- -| Returns the exponent bits of the double-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ -#define expF64UI( a ) ((int_fast16_t)((a)>>52)&0x7FF) -/*---------------------------------------------------------------------------- -| Returns the fraction bits of the double-precision floating-point value `a'. -*----------------------------------------------------------------------------*/ -#define fracF64UI( a ) ((a)&UINT64_C(0x000FFFFFFFFFFFFF)) -/*---------------------------------------------------------------------------- -| Packs the sign `zSign', exponent `zExp', and significand `zSig' into a -| double-precision floating-point value, returning the result. After being -| shifted into the proper positions, the three fields are simply added -| together to form the result. This means that any integer portion of `zSig' -| will be added into the exponent. Since a properly normalized significand -| will have an integer portion equal to 1, the `zExp' input should be 1 less -| than the desired result exponent whenever `zSig' is a complete, normalized -| significand. -*----------------------------------------------------------------------------*/ -#define packToF64UI( sign, exp, sig ) (((uint64_t)(sign)<<63)+((uint64_t)(exp)<<52)+(sig)) - -/*---------------------------------------------------------------------------- -| Normalizes the subnormal double-precision floating-point value represented -| by the denormalized significand `aSig'. The normalized exponent and -| significand are stored at the locations pointed to by `zExpPtr' and -| `zSigPtr', respectively. -*----------------------------------------------------------------------------*/ -struct exp16_sig64 { int_fast16_t exp; uint_fast64_t sig; }; -struct exp16_sig64 softfloat_normSubnormalF64Sig( uint_fast64_t ); - -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and significand `zSig', and returns the proper double-precision floating- -| point value corresponding to the abstract input. Ordinarily, the abstract -| value is simply rounded and packed into the double-precision format, with -| the inexact exception raised if the abstract input cannot be represented -| exactly. However, if the abstract value is too large, the overflow and -| inexact exceptions are raised and an infinity or maximal finite value is -| returned. If the abstract value is too small, the input value is rounded -| to a subnormal number, and the underflow and inexact exceptions are raised -| if the abstract input cannot be represented exactly as a subnormal double- -| precision floating-point number. -| The input significand `zSig' has its binary point between bits 62 -| and 61, which is 10 bits to the left of the usual location. This shifted -| significand must be normalized or smaller. If `zSig' is not normalized, -| `zExp' must be 0; in that case, the result returned is a subnormal number, -| and it must not require rounding. In the usual case that `zSig' is -| normalized, `zExp' must be 1 less than the ``true'' floating-point exponent. -| The handling of underflow and overflow follows the IEC/IEEE Standard for -| Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ -float64_t softfloat_roundPackToF64( bool, int_fast16_t, uint_fast64_t ); -/*---------------------------------------------------------------------------- -| Takes an abstract floating-point value having sign `zSign', exponent `zExp', -| and significand `zSig', and returns the proper double-precision floating- -| point value corresponding to the abstract input. This routine is just like -| `roundAndPackFloat64' except that `zSig' does not have to be normalized. -| Bit 63 of `zSig' must be zero, and `zExp' must be 1 less than the ``true'' -| floating-point exponent. -*----------------------------------------------------------------------------*/ -float64_t softfloat_normRoundPackToF64( bool, int_fast16_t, uint_fast64_t ); - -/*---------------------------------------------------------------------------- -| Returns the result of adding the absolute values of the double-precision -| floating-point values `a' and `b'. If `zSign' is 1, the sum is negated -| before being returned. `zSign' is ignored if the result is a NaN. -| The addition is performed according to the IEC/IEEE Standard for Binary -| Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ -float64_t softfloat_addMagsF64( uint_fast64_t, uint_fast64_t, bool ); -/*---------------------------------------------------------------------------- -| Returns the result of subtracting the absolute values of the double- -| precision floating-point values `a' and `b'. If `zSign' is 1, the -| difference is negated before being returned. `zSign' is ignored if the -| result is a NaN. The subtraction is performed according to the IEC/IEEE -| Standard for Binary Floating-Point Arithmetic. -*----------------------------------------------------------------------------*/ -float64_t softfloat_subMagsF64( uint_fast64_t, uint_fast64_t, bool ); -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -float64_t - softfloat_mulAddF64( int, uint_fast64_t, uint_fast64_t, uint_fast64_t ); - diff --git a/softfloat/primitives.h b/softfloat/primitives.h deleted file mode 100755 index 71038ea..0000000 --- a/softfloat/primitives.h +++ /dev/null @@ -1,628 +0,0 @@ - -/*============================================================================ - -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 3. - -*** UPDATE - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal notice) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -#include -#include - -/*** CHANGE TO USE `fast' INTEGER TYPES? ***/ -/*** ADD 80-BIT FUNCTIONS? ***/ - -#ifdef LITTLEENDIAN -struct uintx80 { uint64_t v0; uint16_t v64; }; -struct uint128 { uint64_t v0, v64; }; -struct uint192 { uint64_t v0, v64, v128; }; -struct uint256 { uint64_t v0, v64, v128, v192; }; -#else -struct uintx80 { uint16_t v64; uint64_t v0; }; -struct uint128 { uint64_t v64, v0; }; -struct uint192 { uint64_t v128, v64, v0; }; -struct uint256 { uint64_t v256, v128, v64, v0; }; -#endif - -struct uint64_extra { uint64_t v, extra; }; -struct uint128_extra { uint64_t v64; uint64_t v0; uint64_t extra; }; - - -/*** SHIFT COUNTS CANNOT BE ZERO. MUST CHECK BEFORE CALLING! ***/ - - -/*---------------------------------------------------------------------------- -| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' -| is equal to the 128-bit value formed by concatenating `b0' and `b1'. -| Otherwise, returns 0. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 1 <= INLINE_LEVEL ) -INLINE bool - softfloat_eq128( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) - { return ( a64 == b64 ) && ( a0 == b0 ); } -#else -bool softfloat_eq128( uint64_t, uint64_t, uint64_t, uint64_t ); -#endif - -/*---------------------------------------------------------------------------- -| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less -| than or equal to the 128-bit value formed by concatenating `b0' and `b1'. -| Otherwise, returns 0. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 1 <= INLINE_LEVEL ) -INLINE bool - softfloat_le128( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) - { return ( a64 < b64 ) || ( ( a64 == b64 ) && ( a0 <= b0 ) ); } -#else -bool softfloat_le128( uint64_t, uint64_t, uint64_t, uint64_t ); -#endif - -/*---------------------------------------------------------------------------- -| Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less -| than the 128-bit value formed by concatenating `b0' and `b1'. Otherwise, -| returns 0. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 1 <= INLINE_LEVEL ) -INLINE bool - softfloat_lt128( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) - { return ( a64 < b64 ) || ( ( a64 == b64 ) && ( a0 < b0 ) ); } -#else -bool softfloat_lt128( uint64_t, uint64_t, uint64_t, uint64_t ); -#endif - -/*---------------------------------------------------------------------------- -| Shifts the 128-bit value formed by concatenating `a0' and `a1' left by the -| number of bits given in `count'. Any bits shifted off are lost. The value -| of `count' must be less than 64. The result is broken into two 64-bit -| pieces which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 2 <= INLINE_LEVEL ) -INLINE struct uint128 - softfloat_shortShift128Left( uint64_t a64, uint64_t a0, unsigned int count ) -{ - struct uint128 z; - z.v64 = a64<>( ( - count ) & 63 ); - z.v0 = a0<>( negCount & 63 ); - z.v64 = a64<>( negCount & 63 ); - z.v0 = a0<>count | ( (uint32_t) ( a<<( ( - count ) & 31 ) ) != 0 ) - : ( a != 0 ); -} -#else -uint32_t softfloat_shift32RightJam( uint32_t, unsigned int ); -#endif - -/*---------------------------------------------------------------------------- -| Shift count is less than 32. -*----------------------------------------------------------------------------*/ -#if defined INLINE -INLINE uint32_t softfloat_shortShift32Right1Jam( uint32_t a ) - { return a>>1 | ( a & 1 ); } -#else -uint32_t softfloat_shortShift32Right1Jam( uint32_t ); -#endif - -/*---------------------------------------------------------------------------- -| Shifts `a' right by the number of bits given in `count'. If any nonzero -| bits are shifted off, they are ``jammed'' into the least significant bit of -| the result by setting the least significant bit to 1. The value of `count' -| can be arbitrarily large; in particular, if `count' is greater than 64, the -| result will be either 0 or 1, depending on whether `a' is zero or nonzero. -| The result is stored in the location pointed to by `zPtr'. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 3 <= INLINE_LEVEL ) -INLINE uint64_t softfloat_shift64RightJam( uint64_t a, unsigned int count ) -{ - return - ( count < 64 ) - ? a>>count | ( (uint64_t) ( a<<( ( - count ) & 63 ) ) != 0 ) - : ( a != 0 ); -} -#else -uint64_t softfloat_shift64RightJam( uint64_t, unsigned int ); -#endif - -/*---------------------------------------------------------------------------- -| Shift count is less than 64. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 2 <= INLINE_LEVEL ) -INLINE uint64_t - softfloat_shortShift64RightJam( uint64_t a, unsigned int count ) - { return a>>count | ( ( a & ( ( (uint64_t) 1<>count; - z.extra = a<<( ( - count ) & 63 ); - } else { - z.v = 0; - z.extra = ( count == 64 ) ? a : ( a != 0 ); - } - z.extra |= ( extra != 0 ); - return z; -} -#else -struct uint64_extra - softfloat_shift64ExtraRightJam( uint64_t, uint64_t, unsigned int ); -#endif - -/*---------------------------------------------------------------------------- -| Shift count is less than 64. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 2 <= INLINE_LEVEL ) -INLINE struct uint64_extra - softfloat_shortShift64ExtraRightJam( - uint64_t a, uint64_t extra, unsigned int count ) -{ - struct uint64_extra z; - z.v = a>>count; - z.extra = a<<( ( - count ) & 63 ) | ( extra != 0 ); - return z; -} -#else -struct uint64_extra - softfloat_shortShift64ExtraRightJam( uint64_t, uint64_t, unsigned int ); -#endif - -/*---------------------------------------------------------------------------- -| Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the -| number of bits given in `count'. Any bits shifted off are lost. The value -| of `count' can be arbitrarily large; in particular, if `count' is greater -| than 128, the result will be 0. The result is broken into two 64-bit pieces -| which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'. -*----------------------------------------------------------------------------*/ -/*---------------------------------------------------------------------------- -| Shift count is less than 64. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 2 <= INLINE_LEVEL ) -INLINE struct uint128 - softfloat_shortShift128Right( uint64_t a64, uint64_t a0, unsigned int count ) -{ - struct uint128 z; - z.v64 = a64>>count; - z.v0 = a64<<( ( - count ) & 63 ) | a0>>count; - return z; -} -#else -struct uint128 - softfloat_shortShift128Right( uint64_t, uint64_t, unsigned int ); -#endif - -/*---------------------------------------------------------------------------- -| Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the -| number of bits given in `count'. If any nonzero bits are shifted off, they -| are ``jammed'' into the least significant bit of the result by setting the -| least significant bit to 1. The value of `count' can be arbitrarily large; -| in particular, if `count' is greater than 128, the result will be either -| 0 or 1, depending on whether the concatenation of `a0' and `a1' is zero or -| nonzero. The result is broken into two 64-bit pieces which are stored at -| the locations pointed to by `z0Ptr' and `z1Ptr'. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 4 <= INLINE_LEVEL ) -INLINE struct uint128 - softfloat_shift128RightJam( uint64_t a64, uint64_t a0, unsigned int count ) -{ - unsigned int negCount; - struct uint128 z; - if ( count < 64 ) { - negCount = - count; - z.v64 = a64>>( count & 63 ); - z.v0 = - a64<<( negCount & 63 ) | a0>>count - | ( (uint64_t) ( a0<<( negCount & 63 ) ) != 0 ); - } else { - z.v64 = 0; - z.v0 = - ( count < 128 ) - ? a64>>( count & 63 ) - | ( ( ( a64 & ( ( (uint64_t) 1<<( count & 63 ) ) - 1 ) ) - | a0 ) - != 0 ) - : ( ( a64 | a0 ) != 0 ); - } - return z; -} -#else -struct uint128 - softfloat_shift128RightJam( uint64_t, uint64_t, unsigned int ); -#endif - -/*---------------------------------------------------------------------------- -| Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' right -| by 64 _plus_ the number of bits given in `count'. The shifted result is -| at most 128 nonzero bits; these are broken into two 64-bit pieces which are -| stored at the locations pointed to by `z0Ptr' and `z1Ptr'. The bits shifted -| off form a third 64-bit result as follows: The _last_ bit shifted off is -| the most-significant bit of the extra result, and the other 63 bits of the -| extra result are all zero if and only if _all_but_the_last_ bits shifted off -| were all zero. This extra result is stored in the location pointed to by -| `z2Ptr'. The value of `count' can be arbitrarily large. -| (This routine makes more sense if `a0', `a1', and `a2' are considered -| to form a fixed-point value with binary point between `a1' and `a2'. This -| fixed-point value is shifted right by the number of bits given in `count', -| and the integer part of the result is returned at the locations pointed to -| by `z0Ptr' and `z1Ptr'. The fractional part of the result may be slightly -| corrupted as described above, and is returned at the location pointed to by -| `z2Ptr'.) -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 5 <= INLINE_LEVEL ) -INLINE struct uint128_extra - softfloat_shift128ExtraRightJam( - uint64_t a64, uint64_t a0, uint64_t extra, unsigned int count ) -{ - unsigned int negCount = - count; - struct uint128_extra z; - if ( count < 64 ) { - z.v64 = a64>>count; - z.v0 = a64<<( negCount & 63 ) | a0>>count; - z.extra = a0<<( negCount & 63 ); - } else { - z.v64 = 0; - if ( count == 64 ) { - z.v0 = a64; - z.extra = a0; - } else { - extra |= a0; - if ( count < 128 ) { - z.v0 = a64>>( count & 63 ); - z.extra = a64<<( negCount & 63 ); - } else { - z.v0 = 0; - z.extra = ( count == 128 ) ? a64 : ( a64 != 0 ); - } - } - } - z.extra |= ( extra != 0 ); - return z; -} -#else -struct uint128_extra - softfloat_shift128ExtraRightJam( uint64_t, uint64_t, uint64_t, unsigned int ); -#endif - -/*---------------------------------------------------------------------------- -| Shift count is less than 64. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 3 <= INLINE_LEVEL ) -INLINE struct uint128_extra - softfloat_shortShift128ExtraRightJam( - uint64_t a64, uint64_t a0, uint64_t extra, unsigned int count ) -{ - unsigned int negCount = - count; - struct uint128_extra z; - z.v64 = a64>>count; - z.v0 = a64<<( negCount & 63 ) | a0>>count; - z.extra = a0<<( negCount & 63 ) | ( extra != 0 ); - return z; -} -#else -struct uint128_extra - softfloat_shortShift128ExtraRightJam( - uint64_t, uint64_t, uint64_t, unsigned int ); -#endif - -extern const uint8_t softfloat_countLeadingZeros8[ 256 ]; - -/*---------------------------------------------------------------------------- -| Returns the number of leading 0 bits before the most-significant 1 bit of -| `a'. If `a' is zero, 32 is returned. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 2 <= INLINE_LEVEL ) -INLINE int softfloat_countLeadingZeros32( uint32_t a ) -{ - int count = 0; - if ( a < 0x10000 ) { - count = 16; - a <<= 16; - } - if ( a < 0x1000000 ) { - count += 8; - a <<= 8; - } - count += softfloat_countLeadingZeros8[ a>>24 ]; - return count; -} -#else -int softfloat_countLeadingZeros32( uint32_t ); -#endif - -/*---------------------------------------------------------------------------- -| Returns the number of leading 0 bits before the most-significant 1 bit of -| `a'. If `a' is zero, 64 is returned. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 4 <= INLINE_LEVEL ) -INLINE int softfloat_countLeadingZeros64( uint64_t a ) -{ - int count = 32; - uint32_t a32 = a; - if ( UINT64_C( 0x100000000 ) <= a ) { - count = 0; - a32 = a>>32; - } - /*------------------------------------------------------------------------ - | From here, result is current count + count leading zeros of `a32'. - *------------------------------------------------------------------------*/ - if ( a32 < 0x10000 ) { - count += 16; - a32 <<= 16; - } - if ( a32 < 0x1000000 ) { - count += 8; - a32 <<= 8; - } - count += softfloat_countLeadingZeros8[ a32>>24 ]; - return count; -} -#else -int softfloat_countLeadingZeros64( uint64_t ); -#endif - -/*---------------------------------------------------------------------------- -| Adds the 128-bit value formed by concatenating `a0' and `a1' to the 128-bit -| value formed by concatenating `b0' and `b1'. Addition is modulo 2^128, so -| any carry out is lost. The result is broken into two 64-bit pieces which -| are stored at the locations pointed to by `z0Ptr' and `z1Ptr'. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 2 <= INLINE_LEVEL ) -INLINE struct uint128 - softfloat_add128( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) -{ - struct uint128 z; - z.v0 = a0 + b0; - z.v64 = a64 + b64; - z.v64 += ( z.v0 < a0 ); - return z; -} -#else -struct uint128 softfloat_add128( uint64_t, uint64_t, uint64_t, uint64_t ); -#endif - -/*---------------------------------------------------------------------------- -| Adds the 192-bit value formed by concatenating `a0', `a1', and `a2' to the -| 192-bit value formed by concatenating `b0', `b1', and `b2'. Addition is -| modulo 2^192, so any carry out is lost. The result is broken into three -| 64-bit pieces which are stored at the locations pointed to by `z0Ptr', -| `z1Ptr', and `z2Ptr'. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 3 <= INLINE_LEVEL ) -INLINE struct uint192 - softfloat_add192( - uint64_t a128, - uint64_t a64, - uint64_t a0, - uint64_t b128, - uint64_t b64, - uint64_t b0 - ) -{ - struct uint192 z; - unsigned int carry64, carry128; - z.v0 = a0 + b0; - carry64 = ( z.v0 < a0 ); - z.v64 = a64 + b64; - carry128 = ( z.v64 < a64 ); - z.v128 = a128 + b128; - z.v64 += carry64; - carry128 += ( z.v64 < carry64 ); - z.v128 += carry128; - return z; -} -#else -struct uint192 - softfloat_add192( - uint64_t, uint64_t, uint64_t, uint64_t, uint64_t, uint64_t ); -#endif - -/*---------------------------------------------------------------------------- -| Subtracts the 128-bit value formed by concatenating `b0' and `b1' from the -| 128-bit value formed by concatenating `a0' and `a1'. Subtraction is modulo -| 2^128, so any borrow out (carry out) is lost. The result is broken into two -| 64-bit pieces which are stored at the locations pointed to by `z0Ptr' and -| `z1Ptr'. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 2 <= INLINE_LEVEL ) -INLINE struct uint128 - softfloat_sub128( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) -{ - struct uint128 z; - z.v0 = a0 - b0; - z.v64 = a64 - b64; - z.v64 -= ( a0 < b0 ); - return z; -} -#else -struct uint128 softfloat_sub128( uint64_t, uint64_t, uint64_t, uint64_t ); -#endif - -/*---------------------------------------------------------------------------- -| Subtracts the 192-bit value formed by concatenating `b0', `b1', and `b2' -| from the 192-bit value formed by concatenating `a0', `a1', and `a2'. -| Subtraction is modulo 2^192, so any borrow out (carry out) is lost. The -| result is broken into three 64-bit pieces which are stored at the locations -| pointed to by `z0Ptr', `z1Ptr', and `z2Ptr'. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 3 <= INLINE_LEVEL ) -INLINE struct uint192 - softfloat_sub192( - uint64_t a128, - uint64_t a64, - uint64_t a0, - uint64_t b128, - uint64_t b64, - uint64_t b0 - ) -{ - struct uint192 z; - unsigned int borrow64, borrow128; - z.v0 = a0 - b0; - borrow64 = ( a0 < b0 ); - z.v64 = a64 - b64; - borrow128 = ( a64 < b64 ); - z.v128 = a128 - b128; - borrow128 += ( z.v64 < borrow64 ); - z.v64 -= borrow64; - z.v128 -= borrow128; - return z; -} -#else -struct uint192 - softfloat_sub192( - uint64_t, uint64_t, uint64_t, uint64_t, uint64_t, uint64_t ); -#endif - -/*---------------------------------------------------------------------------- -| Multiplies `a' by `b' to obtain a 128-bit product. The product is broken -| into two 64-bit pieces which are stored at the locations pointed to by -| `z0Ptr' and `z1Ptr'. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 4 <= INLINE_LEVEL ) -INLINE struct uint128 softfloat_mul64To128( uint64_t a, uint64_t b ) -{ - uint32_t a32 = a>>32; - uint32_t a0 = a; - uint32_t b32 = b>>32; - uint32_t b0 = b; - struct uint128 z; - uint64_t mid1, mid2, mid; - z.v0 = (uint64_t) a0 * b0; - mid1 = (uint64_t) a32 * b0; - mid2 = (uint64_t) a0 * b32; - z.v64 = (uint64_t) a32 * b32; - mid = mid1 + mid2; - z.v64 += ( (uint64_t) ( mid < mid1 ) )<<32 | mid>>32; - mid <<= 32; - z.v0 += mid; - z.v64 += ( z.v0 < mid ); - return z; -} -#else -struct uint128 softfloat_mul64To128( uint64_t, uint64_t ); -#endif - -/*---------------------------------------------------------------------------- -| Multiplies the 128-bit value formed by concatenating `a0' and `a1' by -| `b' to obtain a 192-bit product. The product is broken into three 64-bit -| pieces which are stored at the locations pointed to by `z0Ptr', `z1Ptr', and -| `z2Ptr'. -*----------------------------------------------------------------------------*/ -struct uint192 softfloat_mul128By64To192( uint64_t, uint64_t, uint64_t ); -/*---------------------------------------------------------------------------- -| Multiplies the 128-bit value formed by concatenating `a0' and `a1' to the -| 128-bit value formed by concatenating `b0' and `b1' to obtain a 256-bit -| product. The product is broken into four 64-bit pieces which are stored at -| the locations pointed to by `z0Ptr', `z1Ptr', `z2Ptr', and `z3Ptr'. -*----------------------------------------------------------------------------*/ -struct uint256 softfloat_mul128To256( uint64_t, uint64_t, uint64_t, uint64_t ); - -/*---------------------------------------------------------------------------- -| Returns an approximation to the 64-bit integer quotient obtained by dividing -| `b' into the 128-bit value formed by concatenating `a0' and `a1'. The -| divisor `b' must be at least 2^63. If q is the exact quotient truncated -| toward zero, the approximation returned lies between q and q + 2 inclusive. -| If the exact quotient q is larger than 64 bits, the maximum positive 64-bit -| unsigned integer is returned. -*----------------------------------------------------------------------------*/ -uint64_t softfloat_estimateDiv128To64( uint64_t, uint64_t, uint64_t ); - -/*---------------------------------------------------------------------------- -| Returns an approximation to the square root of the 32-bit significand given -| by `a'. Considered as an integer, `a' must be at least 2^31. If bit 0 of -| `aExp' (the least significant bit) is 1, the integer returned approximates -| 2^31*sqrt(`a'/2^31), where `a' is considered an integer. If bit 0 of `aExp' -| is 0, the integer returned approximates 2^31*sqrt(`a'/2^30). In either -| case, the approximation returned lies strictly within +/-2 of the exact -| value. -*----------------------------------------------------------------------------*/ -uint32_t softfloat_estimateSqrt32( unsigned int, uint32_t ); - diff --git a/softfloat/s_add128.c b/softfloat/s_add128.c deleted file mode 100755 index 59c0348..0000000 --- a/softfloat/s_add128.c +++ /dev/null @@ -1,17 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint128 - softfloat_add128( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) -{ - struct uint128 z; - - z.v0 = a0 + b0; - z.v64 = a64 + b64; - z.v64 += ( z.v0 < a0 ); - return z; - -} - diff --git a/softfloat/s_add192.c b/softfloat/s_add192.c deleted file mode 100755 index 543eb5d..0000000 --- a/softfloat/s_add192.c +++ /dev/null @@ -1,30 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint192 - softfloat_add192( - uint64_t a128, - uint64_t a64, - uint64_t a0, - uint64_t b128, - uint64_t b64, - uint64_t b0 - ) -{ - struct uint192 z; - unsigned int carry64, carry128; - - z.v0 = a0 + b0; - carry64 = ( z.v0 < a0 ); - z.v64 = a64 + b64; - carry128 = ( z.v64 < a64 ); - z.v128 = a128 + b128; - z.v64 += carry64; - carry128 += ( z.v64 < carry64 ); - z.v128 += carry128; - return z; - -} - diff --git a/softfloat/s_addMagsF32.c b/softfloat/s_addMagsF32.c deleted file mode 100755 index f361e2b..0000000 --- a/softfloat/s_addMagsF32.c +++ /dev/null @@ -1,75 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" - -float32_t - softfloat_addMagsF32( uint_fast32_t uiA, uint_fast32_t uiB, bool signZ ) -{ - int_fast16_t expA; - uint_fast32_t sigA; - int_fast16_t expB; - uint_fast32_t sigB; - int_fast16_t expDiff; - uint_fast32_t uiZ; - int_fast16_t expZ; - uint_fast32_t sigZ; - union ui32_f32 uZ; - - expA = expF32UI( uiA ); - sigA = fracF32UI( uiA ); - expB = expF32UI( uiB ); - sigB = fracF32UI( uiB ); - expDiff = expA - expB; - sigA <<= 6; - sigB <<= 6; - if ( ! expDiff ) { - if ( expA == 0xFF ) { - if ( sigA | sigB ) goto propagateNaN; - uiZ = uiA; - goto uiZ; - } - if ( ! expA ) { - uiZ = packToF32UI( signZ, 0, ( uiA + uiB ) & 0x7FFFFFFF ); - goto uiZ; - } - expZ = expA; - sigZ = 0x40000000 + sigA + sigB; - } else { - if ( expDiff < 0 ) { - if ( expB == 0xFF ) { - if ( sigB ) goto propagateNaN; - uiZ = packToF32UI( signZ, 0xFF, 0 ); - goto uiZ; - } - expZ = expB; - sigA += expA ? 0x20000000 : sigA; - sigA = softfloat_shift32RightJam( sigA, - expDiff ); - } else { - if ( expA == 0xFF ) { - if ( sigA ) goto propagateNaN; - uiZ = uiA; - goto uiZ; - } - expZ = expA; - sigB += expB ? 0x20000000 : sigB; - sigB = softfloat_shift32RightJam( sigB, expDiff ); - } - sigZ = 0x20000000 + sigA + sigB; - if ( sigZ < 0x40000000 ) { - --expZ; - sigZ <<= 1; - } - } - return softfloat_roundPackToF32( signZ, expZ, sigZ ); - propagateNaN: - uiZ = softfloat_propagateNaNF32UI( uiA, uiB ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/s_addMagsF64.c b/softfloat/s_addMagsF64.c deleted file mode 100755 index a81c3e4..0000000 --- a/softfloat/s_addMagsF64.c +++ /dev/null @@ -1,77 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" - -float64_t - softfloat_addMagsF64( uint_fast64_t uiA, uint_fast64_t uiB, bool signZ ) -{ - int_fast16_t expA; - uint_fast64_t sigA; - int_fast16_t expB; - uint_fast64_t sigB; - int_fast16_t expDiff; - uint_fast64_t uiZ; - int_fast16_t expZ; - uint_fast64_t sigZ; - union ui64_f64 uZ; - - expA = expF64UI( uiA ); - sigA = fracF64UI( uiA ); - expB = expF64UI( uiB ); - sigB = fracF64UI( uiB ); - expDiff = expA - expB; - sigA <<= 9; - sigB <<= 9; - if ( ! expDiff ) { - if ( expA == 0x7FF ) { - if ( sigA | sigB ) goto propagateNaN; - uiZ = uiA; - goto uiZ; - } - if ( ! expA ) { - uiZ = - packToF64UI( - signZ, 0, ( uiA + uiB ) & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ); - goto uiZ; - } - expZ = expA; - sigZ = UINT64_C( 0x4000000000000000 ) + sigA + sigB; - } else { - if ( expDiff < 0 ) { - if ( expB == 0x7FF ) { - if ( sigB ) goto propagateNaN; - uiZ = packToF64UI( signZ, 0x7FF, 0 ); - goto uiZ; - } - expZ = expB; - sigA += expA ? UINT64_C( 0x2000000000000000 ) : sigA; - sigA = softfloat_shift64RightJam( sigA, - expDiff ); - } else { - if ( expA == 0x7FF ) { - if ( sigA ) goto propagateNaN; - uiZ = uiA; - goto uiZ; - } - expZ = expA; - sigB += expB ? UINT64_C( 0x2000000000000000 ) : sigB; - sigB = softfloat_shift64RightJam( sigB, expDiff ); - } - sigZ = UINT64_C( 0x2000000000000000 ) + sigA + sigB; - if ( sigZ < UINT64_C( 0x4000000000000000 ) ) { - --expZ; - sigZ <<= 1; - } - } - return softfloat_roundPackToF64( signZ, expZ, sigZ ); - propagateNaN: - uiZ = softfloat_propagateNaNF64UI( uiA, uiB ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/s_countLeadingZeros32.c b/softfloat/s_countLeadingZeros32.c deleted file mode 100755 index 0bd17e1..0000000 --- a/softfloat/s_countLeadingZeros32.c +++ /dev/null @@ -1,22 +0,0 @@ - -#include -#include "primitives.h" - -int softfloat_countLeadingZeros32( uint32_t a ) -{ - int count; - - count = 0; - if ( a < 0x10000 ) { - count = 16; - a <<= 16; - } - if ( a < 0x1000000 ) { - count += 8; - a <<= 8; - } - count += softfloat_countLeadingZeros8[ a>>24 ]; - return count; - -} - diff --git a/softfloat/s_countLeadingZeros64.c b/softfloat/s_countLeadingZeros64.c deleted file mode 100755 index 79f4280..0000000 --- a/softfloat/s_countLeadingZeros64.c +++ /dev/null @@ -1,32 +0,0 @@ - -#include -#include "primitives.h" -#include "platform.h" - -int softfloat_countLeadingZeros64( uint64_t a ) -{ - int count; - uint32_t a32; - - count = 32; - a32 = a; - if ( UINT64_C( 0x100000000 ) <= a ) { - count = 0; - a32 = a>>32; - } - /*------------------------------------------------------------------------ - | From here, result is current count + count leading zeros of `a32'. - *------------------------------------------------------------------------*/ - if ( a32 < 0x10000 ) { - count += 16; - a32 <<= 16; - } - if ( a32 < 0x1000000 ) { - count += 8; - a32 <<= 8; - } - count += softfloat_countLeadingZeros8[ a32>>24 ]; - return count; - -} - diff --git a/softfloat/s_countLeadingZeros8.c b/softfloat/s_countLeadingZeros8.c deleted file mode 100755 index 4eca7e9..0000000 --- a/softfloat/s_countLeadingZeros8.c +++ /dev/null @@ -1,24 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -const uint8_t softfloat_countLeadingZeros8[ 256 ] = { - 8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4, - 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -}; - diff --git a/softfloat/s_eq128.c b/softfloat/s_eq128.c deleted file mode 100755 index 7261dc4..0000000 --- a/softfloat/s_eq128.c +++ /dev/null @@ -1,13 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" - -bool softfloat_eq128( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) -{ - - return ( a64 == b64 ) && ( a0 == b0 ); - -} - diff --git a/softfloat/s_estimateDiv128To64.c b/softfloat/s_estimateDiv128To64.c deleted file mode 100755 index f8610a2..0000000 --- a/softfloat/s_estimateDiv128To64.c +++ /dev/null @@ -1,28 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -uint64_t softfloat_estimateDiv128To64( uint64_t a64, uint64_t a0, uint64_t b ) -{ - uint32_t b32; - uint64_t z; - struct uint128 term, rem; - uint64_t rem32; - - if ( b <= a64 ) return UINT64_C( 0xFFFFFFFFFFFFFFFF ); - b32 = b>>32; - z = ( (uint64_t) b32<<32 <= a64 ) ? UINT64_C( 0xFFFFFFFF00000000 ) - : ( a64 / b32 )<<32; - term = softfloat_mul64To128( b, z ); - rem = softfloat_sub128( a64, a0, term.v64, term.v0 ); - while ( UINT64_C( 0x8000000000000000 ) <= rem.v64 ) { - z -= UINT64_C( 0x100000000 ); - rem = softfloat_add128( rem.v64, rem.v0, b32, (uint64_t) ( b<<32 ) ); - } - rem32 = ( rem.v64<<32 ) | ( rem.v0>>32 ); - z |= ( (uint64_t) b32<<32 <= rem32 ) ? 0xFFFFFFFF : rem32 / b32; - return z; - -} - diff --git a/softfloat/s_estimateSqrt32.c b/softfloat/s_estimateSqrt32.c deleted file mode 100755 index e22a9dc..0000000 --- a/softfloat/s_estimateSqrt32.c +++ /dev/null @@ -1,37 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -uint32_t softfloat_estimateSqrt32( unsigned int expA, uint32_t a ) -{ - static const uint16_t sqrtOddAdjustments[] = { - 0x0004, 0x0022, 0x005D, 0x00B1, 0x011D, 0x019F, 0x0236, 0x02E0, - 0x039C, 0x0468, 0x0545, 0x0631, 0x072B, 0x0832, 0x0946, 0x0A67 - }; - static const uint16_t sqrtEvenAdjustments[] = { - 0x0A2D, 0x08AF, 0x075A, 0x0629, 0x051A, 0x0429, 0x0356, 0x029E, - 0x0200, 0x0179, 0x0109, 0x00AF, 0x0068, 0x0034, 0x0012, 0x0002 - }; - int index; - uint32_t z; - union { uint32_t ui; int32_t i; } u32; - - index = ( a>>27 ) & 15; - if ( expA & 1 ) { - z = 0x4000 + ( a>>17 ) - sqrtOddAdjustments[ index ]; - z = ( ( a / z )<<14 ) + ( z<<15 ); - a >>= 1; - } else { - z = 0x8000 + ( a>>17 ) - sqrtEvenAdjustments[ index ]; - z = a / z + z; - z = ( 0x20000 <= z ) ? 0xFFFF8000 : z<<15; - if ( z <= a ) { - u32.ui = a; - return u32.i>>1; - } - } - return (uint32_t) ( ( (uint64_t) a<<31 ) / z ) + ( z>>1 ); - -} - diff --git a/softfloat/s_le128.c b/softfloat/s_le128.c deleted file mode 100755 index 83b1d7f..0000000 --- a/softfloat/s_le128.c +++ /dev/null @@ -1,13 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" - -bool softfloat_le128( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) -{ - - return ( a64 < b64 ) || ( ( a64 == b64 ) && ( a0 <= b0 ) ); - -} - diff --git a/softfloat/s_lt128.c b/softfloat/s_lt128.c deleted file mode 100755 index 33a3df4..0000000 --- a/softfloat/s_lt128.c +++ /dev/null @@ -1,13 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" - -bool softfloat_lt128( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) -{ - - return ( a64 < b64 ) || ( ( a64 == b64 ) && ( a0 < b0 ) ); - -} - diff --git a/softfloat/s_mul128By64To192.c b/softfloat/s_mul128By64To192.c deleted file mode 100755 index dfa8825..0000000 --- a/softfloat/s_mul128By64To192.c +++ /dev/null @@ -1,20 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint192 - softfloat_mul128By64To192( uint64_t a64, uint64_t a0, uint64_t b ) -{ - struct uint128 p0, p64; - struct uint192 z; - - p0 = softfloat_mul64To128( a0, b ); - z.v0 = p0.v0; - p64 = softfloat_mul64To128( a64, b ); - z.v64 = p64.v0 + p0.v64; - z.v128 = p64.v64 + ( z.v64 < p64.v0 ); - return z; - -} - diff --git a/softfloat/s_mul128To256.c b/softfloat/s_mul128To256.c deleted file mode 100755 index a96cd94..0000000 --- a/softfloat/s_mul128To256.c +++ /dev/null @@ -1,28 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint256 - softfloat_mul128To256( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) -{ - struct uint128 p0, p64, p128; - struct uint256 z; - - p0 = softfloat_mul64To128( a0, b0 ); - z.v0 = p0.v0; - p64 = softfloat_mul64To128( a64, b0 ); - z.v64 = p64.v0 + p0.v64; - z.v128 = p64.v64 + ( z.v64 < p64.v0 ); - p128 = softfloat_mul64To128( a64, b64 ); - z.v128 += p128.v0; - z.v192 = p128.v64 + ( z.v128 < p128.v0 ); - p64 = softfloat_mul64To128( a0, b64 ); - z.v64 += p64.v0; - p64.v64 += ( z.v64 < p64.v0 ); - z.v128 += p64.v64; - z.v192 += ( z.v128 < p64.v64 ); - return z; - -} - diff --git a/softfloat/s_mul64To128.c b/softfloat/s_mul64To128.c deleted file mode 100755 index c17780b..0000000 --- a/softfloat/s_mul64To128.c +++ /dev/null @@ -1,28 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint128 softfloat_mul64To128( uint64_t a, uint64_t b ) -{ - uint32_t a32, a0, b32, b0; - struct uint128 z; - uint64_t mid1, mid2, mid; - - a32 = a>>32; - a0 = a; - b32 = b>>32; - b0 = b; - z.v0 = (uint64_t) a0 * b0; - mid1 = (uint64_t) a32 * b0; - mid2 = (uint64_t) a0 * b32; - z.v64 = (uint64_t) a32 * b32; - mid = mid1 + mid2; - z.v64 += ( (uint64_t) ( mid < mid1 ) )<<32 | mid>>32; - mid <<= 32; - z.v0 += mid; - z.v64 += ( z.v0 < mid ); - return z; - -} - diff --git a/softfloat/s_mulAddF32.c b/softfloat/s_mulAddF32.c deleted file mode 100755 index e55a0ba..0000000 --- a/softfloat/s_mulAddF32.c +++ /dev/null @@ -1,171 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float32_t - softfloat_mulAddF32( - int op, uint_fast32_t uiA, uint_fast32_t uiB, uint_fast32_t uiC ) -{ - bool signA; - int_fast16_t expA; - uint_fast32_t sigA; - bool signB; - int_fast16_t expB; - uint_fast32_t sigB; - bool signC; - int_fast16_t expC; - uint_fast32_t sigC; - bool signProd; - uint_fast32_t magBits, uiZ; - struct exp16_sig32 normExpSig; - int_fast16_t expProd; - uint_fast64_t sigProd; - bool signZ; - int_fast16_t expZ; - uint_fast32_t sigZ; - int_fast16_t expDiff; - uint_fast64_t sigZ64, sigC64; - int shiftCount; - union ui32_f32 uZ; - - signA = signF32UI( uiA ); - expA = expF32UI( uiA ); - sigA = fracF32UI( uiA ); - signB = signF32UI( uiB ); - expB = expF32UI( uiB ); - sigB = fracF32UI( uiB ); - signC = signF32UI( uiC ) ^ ( op == softfloat_mulAdd_subC ); - expC = expF32UI( uiC ); - sigC = fracF32UI( uiC ); - signProd = signA ^ signB ^ ( op == softfloat_mulAdd_subProd ); - if ( expA == 0xFF ) { - if ( sigA || ( ( expB == 0xFF ) && sigB ) ) goto propagateNaN_ABC; - magBits = expB | sigB; - goto infProdArg; - } - if ( expB == 0xFF ) { - if ( sigB ) goto propagateNaN_ABC; - magBits = expA | sigA; - goto infProdArg; - } - if ( expC == 0xFF ) { - if ( sigC ) { - uiZ = 0; - goto propagateNaN_ZC; - } - uiZ = uiC; - goto uiZ; - } - if ( ! expA ) { - if ( ! sigA ) goto zeroProd; - normExpSig = softfloat_normSubnormalF32Sig( sigA ); - expA = normExpSig.exp; - sigA = normExpSig.sig; - } - if ( ! expB ) { - if ( ! sigB ) goto zeroProd; - normExpSig = softfloat_normSubnormalF32Sig( sigB ); - expB = normExpSig.exp; - sigB = normExpSig.sig; - } - expProd = expA + expB - 0x7E; - sigA = ( sigA | 0x00800000 )<<7; - sigB = ( sigB | 0x00800000 )<<7; - sigProd = (uint_fast64_t) sigA * sigB; - if ( sigProd < UINT64_C( 0x2000000000000000 ) ) { - --expProd; - sigProd <<= 1; - } - signZ = signProd; - if ( ! expC ) { - if ( ! sigC ) { - expZ = expProd - 1; - sigZ = softfloat_shortShift64RightJam( sigProd, 31 ); - goto roundPack; - } - normExpSig = softfloat_normSubnormalF32Sig( sigC ); - expC = normExpSig.exp; - sigC = normExpSig.sig; - } - sigC = ( sigC | 0x00800000 )<<6; - expDiff = expProd - expC; - if ( signProd == signC ) { - if ( expDiff <= 0 ) { - expZ = expC; - sigZ = sigC + softfloat_shift64RightJam( sigProd, 32 - expDiff ); - } else { - expZ = expProd; - sigZ64 = - sigProd - + softfloat_shift64RightJam( - (uint_fast64_t) sigC<<32, expDiff ); - sigZ = softfloat_shortShift64RightJam( sigZ64, 32 ); - } - if ( sigZ < 0x40000000 ) { - --expZ; - sigZ <<= 1; - } - } else { -/*** OPTIMIZE BETTER? ***/ - sigC64 = (uint_fast64_t) sigC<<32; - if ( expDiff < 0 ) { - signZ = signC; - expZ = expC; - sigZ64 = sigC64 - softfloat_shift64RightJam( sigProd, - expDiff ); - } else if ( ! expDiff ) { - expZ = expProd; - sigZ64 = sigProd - sigC64; - if ( ! sigZ64 ) goto completeCancellation; - if ( sigZ64 & UINT64_C( 0x8000000000000000 ) ) { - signZ ^= 1; - sigZ64 = - sigZ64; - } - } else { - expZ = expProd; - sigZ64 = sigProd - softfloat_shift64RightJam( sigC64, expDiff ); - } - shiftCount = softfloat_countLeadingZeros64( sigZ64 ) - 1; - expZ -= shiftCount; - shiftCount -= 32; - if ( shiftCount < 0 ) { - sigZ = softfloat_shortShift64RightJam( sigZ64, - shiftCount ); - } else { - sigZ = (uint_fast32_t) sigZ64< -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float64_t - softfloat_mulAddF64( - int op, uint_fast64_t uiA, uint_fast64_t uiB, uint_fast64_t uiC ) -{ - bool signA; - int_fast16_t expA; - uint_fast64_t sigA; - bool signB; - int_fast16_t expB; - uint_fast64_t sigB; - bool signC; - int_fast16_t expC; - uint_fast64_t sigC; - bool signProd; - uint_fast64_t magBits, uiZ; - struct exp16_sig64 normExpSig; - int_fast16_t expProd; - struct uint128 sigProd; - bool signZ; - int_fast16_t expZ; - uint_fast64_t sigZ; - int_fast16_t expDiff; - struct uint128 sigC128, sigZ128; - int shiftCount; - union ui64_f64 uZ; - - signA = signF64UI( uiA ); - expA = expF64UI( uiA ); - sigA = fracF64UI( uiA ); - signB = signF64UI( uiB ); - expB = expF64UI( uiB ); - sigB = fracF64UI( uiB ); - signC = signF64UI( uiC ) ^ ( op == softfloat_mulAdd_subC ); - expC = expF64UI( uiC ); - sigC = fracF64UI( uiC ); - signProd = signA ^ signB ^ ( op == softfloat_mulAdd_subProd ); - if ( expA == 0x7FF ) { - if ( sigA || ( ( expB == 0x7FF ) && sigB ) ) goto propagateNaN_ABC; - magBits = expB | sigB; - goto infProdArg; - } - if ( expB == 0x7FF ) { - if ( sigB ) goto propagateNaN_ABC; - magBits = expA | sigA; - goto infProdArg; - } - if ( expC == 0x7FF ) { - if ( sigC ) { - uiZ = 0; - goto propagateNaN_ZC; - } - uiZ = uiC; - goto uiZ; - } - if ( ! expA ) { - if ( ! sigA ) goto zeroProd; - normExpSig = softfloat_normSubnormalF64Sig( sigA ); - expA = normExpSig.exp; - sigA = normExpSig.sig; - } - if ( ! expB ) { - if ( ! sigB ) goto zeroProd; - normExpSig = softfloat_normSubnormalF64Sig( sigB ); - expB = normExpSig.exp; - sigB = normExpSig.sig; - } - expProd = expA + expB - 0x3FE; - sigA = ( sigA | UINT64_C( 0x0010000000000000 ) )<<10; - sigB = ( sigB | UINT64_C( 0x0010000000000000 ) )<<10; - sigProd = softfloat_mul64To128( sigA, sigB ); - if ( sigProd.v64 < UINT64_C( 0x2000000000000000 ) ) { - --expProd; - sigProd = softfloat_shortShift128Left( sigProd.v64, sigProd.v0, 1 ); - } - signZ = signProd; - if ( ! expC ) { - if ( ! sigC ) { - expZ = expProd - 1; - sigZ = sigProd.v64<<1 | ( sigProd.v0 != 0 ); - goto roundPack; - } - normExpSig = softfloat_normSubnormalF64Sig( sigC ); - expC = normExpSig.exp; - sigC = normExpSig.sig; - } - sigC = ( sigC | UINT64_C( 0x0010000000000000 ) )<<9; - expDiff = expProd - expC; - if ( signProd == signC ) { - if ( expDiff <= 0 ) { - expZ = expC; - if ( expDiff ) { - sigProd.v64 = - softfloat_shift64RightJam( sigProd.v64, - expDiff ); - } - sigZ = ( sigC + sigProd.v64 ) | ( sigProd.v0 != 0 ); - } else { - expZ = expProd; - sigC128 = softfloat_shift128RightJam( sigC, 0, expDiff ); - sigZ128 = - softfloat_add128( - sigProd.v64, sigProd.v0, sigC128.v64, sigC128.v0 ); - sigZ = sigZ128.v64 | ( sigZ128.v0 != 0 ); - } - if ( sigZ < UINT64_C( 0x4000000000000000 ) ) { - --expZ; - sigZ <<= 1; - } - } else { -/*** OPTIMIZE BETTER? ***/ - if ( expDiff < 0 ) { - signZ = signC; - expZ = expC; - sigProd = - softfloat_shift128RightJam( - sigProd.v64, sigProd.v0, - expDiff ); - sigZ128 = softfloat_sub128( sigC, 0, sigProd.v64, sigProd.v0 ); - } else if ( ! expDiff ) { - expZ = expProd; - sigZ128 = softfloat_sub128( sigProd.v64, sigProd.v0, sigC, 0 ); - if ( ! ( sigZ128.v64 | sigZ128.v0 ) ) goto completeCancellation; - if ( sigZ128.v64 & UINT64_C( 0x8000000000000000 ) ) { - signZ ^= 1; - sigZ128 = softfloat_sub128( 0, 0, sigZ128.v64, sigZ128.v0 ); - } - } else { - expZ = expProd; - sigC128 = softfloat_shift128RightJam( sigC, 0, expDiff ); - sigZ128 = - softfloat_sub128( - sigProd.v64, sigProd.v0, sigC128.v64, sigC128.v0 ); - } - if ( ! sigZ128.v64 ) { - expZ -= 64; - sigZ128.v64 = sigZ128.v0; - sigZ128.v0 = 0; - } - shiftCount = softfloat_countLeadingZeros64( sigZ128.v64 ) - 1; - expZ -= shiftCount; - if ( shiftCount < 0 ) { - sigZ = softfloat_shortShift64RightJam( sigZ128.v64, - shiftCount ); - } else { - sigZ128 = - softfloat_shortShift128Left( - sigZ128.v64, sigZ128.v0, shiftCount ); - sigZ = sigZ128.v64; - } - sigZ |= ( sigZ128.v0 != 0 ); - } - roundPack: - return softfloat_roundPackToF64( signZ, expZ, sigZ ); - propagateNaN_ABC: - uiZ = softfloat_propagateNaNF64UI( uiA, uiB ); - goto propagateNaN_ZC; - infProdArg: - if ( magBits ) { - uiZ = packToF64UI( signProd, 0x7FF, 0 ); - if ( expC != 0x7FF ) goto uiZ; - if ( sigC ) goto propagateNaN_ZC; - if ( signProd == signC ) goto uiZ; - } - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF64UI; - propagateNaN_ZC: - uiZ = softfloat_propagateNaNF64UI( uiZ, uiC ); - goto uiZ; - zeroProd: - uiZ = uiC; - if ( ! ( expC | sigC ) && ( signProd != signC ) ) { - completeCancellation: - uiZ = - packToF64UI( softfloat_roundingMode == softfloat_round_min, 0, 0 ); - } - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/s_normRoundPackToF32.c b/softfloat/s_normRoundPackToF32.c deleted file mode 100755 index 2e6f4b0..0000000 --- a/softfloat/s_normRoundPackToF32.c +++ /dev/null @@ -1,24 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" - -float32_t - softfloat_normRoundPackToF32( bool sign, int_fast16_t exp, uint_fast32_t sig ) -{ - int shiftCount; - union ui32_f32 uZ; - - shiftCount = softfloat_countLeadingZeros32( sig ) - 1; - exp -= shiftCount; - if ( ( 7 <= shiftCount ) && ( (uint16_t) exp < 0xFD ) ) { - uZ.ui = packToF32UI( sign, sig ? exp : 0, sig<<( shiftCount - 7 ) ); - return uZ.f; - } else { - return softfloat_roundPackToF32( sign, exp, sig< -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" - -float64_t - softfloat_normRoundPackToF64( bool sign, int_fast16_t exp, uint_fast64_t sig ) -{ - int shiftCount; - union ui64_f64 uZ; - - shiftCount = softfloat_countLeadingZeros64( sig ) - 1; - exp -= shiftCount; - if ( ( 10 <= shiftCount ) && ( (uint16_t) exp < 0x7FD ) ) { - uZ.ui = packToF64UI( sign, sig ? exp : 0, sig<<( shiftCount - 10 ) ); - return uZ.f; - } else { - return softfloat_roundPackToF64( sign, exp, sig< -#include "platform.h" -#include "primitives.h" -#include "internals.h" - -struct exp16_sig32 softfloat_normSubnormalF32Sig( uint_fast32_t sig ) -{ - int shiftCount; - struct exp16_sig32 z; - - shiftCount = softfloat_countLeadingZeros32( sig ) - 8; - z.exp = 1 - shiftCount; - z.sig = sig< -#include "platform.h" -#include "primitives.h" -#include "internals.h" - -struct exp16_sig64 softfloat_normSubnormalF64Sig( uint_fast64_t sig ) -{ - int shiftCount; - struct exp16_sig64 z; - - shiftCount = softfloat_countLeadingZeros64( sig ) - 11; - z.exp = 1 - shiftCount; - z.sig = sig< -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -float32_t - softfloat_roundPackToF32( bool sign, int_fast16_t exp, uint_fast32_t sig ) -{ - int roundingMode; - bool roundNearestEven; - int roundIncrement, roundBits; - bool isTiny; - uint_fast32_t uiZ; - union ui32_f32 uZ; - - roundingMode = softfloat_roundingMode; - roundNearestEven = ( roundingMode == softfloat_round_nearest_even ); - roundIncrement = 0x40; - if ( - ! roundNearestEven - && ( roundingMode != softfloat_round_nearest_maxMag ) - ) { - roundIncrement = - ( roundingMode == softfloat_round_minMag ) - || ( roundingMode - == ( sign ? softfloat_round_max : softfloat_round_min ) ) - ? 0 - : 0x7F; - } - roundBits = sig & 0x7F; - if ( 0xFD <= (uint16_t) exp ) { - if ( exp < 0 ) { - isTiny = - ( softfloat_detectTininess - == softfloat_tininess_beforeRounding ) - || ( exp < -1 ) - || ( sig + roundIncrement < 0x80000000 ); - sig = softfloat_shift32RightJam( sig, - exp ); - exp = 0; - roundBits = sig & 0x7F; - if ( isTiny && roundBits ) { - softfloat_raiseFlags( softfloat_flag_underflow ); - } - } else if ( - ( 0xFD < exp ) || ( 0x80000000 <= sig + roundIncrement ) - ) { - softfloat_raiseFlags( - softfloat_flag_overflow | softfloat_flag_inexact ); - uiZ = packToF32UI( sign, 0xFF, 0 ) - ! roundIncrement; - goto uiZ; - } - } - if ( roundBits ) softfloat_exceptionFlags |= softfloat_flag_inexact; - sig = ( sig + roundIncrement )>>7; - sig &= ~ ( ! ( roundBits ^ 0x40 ) & roundNearestEven ); - uiZ = packToF32UI( sign, sig ? exp : 0, sig ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/s_roundPackToF64.c b/softfloat/s_roundPackToF64.c deleted file mode 100755 index fb0ef1d..0000000 --- a/softfloat/s_roundPackToF64.c +++ /dev/null @@ -1,66 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -float64_t - softfloat_roundPackToF64( bool sign, int_fast16_t exp, uint_fast64_t sig ) -{ - int roundingMode; - bool roundNearestEven; - int roundIncrement, roundBits; - bool isTiny; - uint_fast64_t uiZ; - union ui64_f64 uZ; - - roundingMode = softfloat_roundingMode; - roundNearestEven = ( roundingMode == softfloat_round_nearest_even ); - roundIncrement = 0x200; - if ( - ! roundNearestEven - && ( roundingMode != softfloat_round_nearest_maxMag ) - ) { - roundIncrement = - ( roundingMode == softfloat_round_minMag ) - || ( roundingMode - == ( sign ? softfloat_round_max : softfloat_round_min ) ) - ? 0 - : 0x3FF; - } - roundBits = sig & 0x3FF; - if ( 0x7FD <= (uint16_t) exp ) { - if ( exp < 0 ) { - isTiny = - ( softfloat_detectTininess - == softfloat_tininess_beforeRounding ) - || ( exp < -1 ) - || ( sig + roundIncrement < UINT64_C( 0x8000000000000000 ) ); - sig = softfloat_shift64RightJam( sig, - exp ); - exp = 0; - roundBits = sig & 0x3FF; - if ( isTiny && roundBits ) { - softfloat_raiseFlags( softfloat_flag_underflow ); - } - } else if ( - ( 0x7FD < exp ) - || ( UINT64_C( 0x8000000000000000 ) <= sig + roundIncrement ) - ) { - softfloat_raiseFlags( - softfloat_flag_overflow | softfloat_flag_inexact ); - uiZ = packToF64UI( sign, 0x7FF, 0 ) - ! roundIncrement; - goto uiZ; - } - } - if ( roundBits ) softfloat_exceptionFlags |= softfloat_flag_inexact; - sig = ( sig + roundIncrement )>>10; - sig &= ~ ( ! ( roundBits ^ 0x200 ) & roundNearestEven ); - uiZ = packToF64UI( sign, sig ? exp : 0, sig ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/s_roundPackToI32.c b/softfloat/s_roundPackToI32.c deleted file mode 100755 index 1c91497..0000000 --- a/softfloat/s_roundPackToI32.c +++ /dev/null @@ -1,48 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -int_fast32_t - softfloat_roundPackToI32( - bool sign, uint_fast64_t sig, int_fast8_t roundingMode, bool exact ) -{ - bool roundNearestEven; - int roundIncrement, roundBits; - uint_fast32_t sig32; - union { uint32_t ui; int32_t i; } uZ; - int_fast32_t z; - - roundNearestEven = ( roundingMode == softfloat_round_nearest_even ); - roundIncrement = 0x40; - if ( - ! roundNearestEven - && ( roundingMode != softfloat_round_nearest_maxMag ) - ) { - roundIncrement = - ( roundingMode == softfloat_round_minMag ) - || ( roundingMode - == ( sign ? softfloat_round_max : softfloat_round_min ) ) - ? 0 - : 0x7F; - } - roundBits = sig & 0x7F; - sig += roundIncrement; - if ( sig & UINT64_C( 0xFFFFFF8000000000 ) ) goto invalid; - sig32 = sig>>7; - sig32 &= ~ ( ! ( roundBits ^ 0x40 ) & roundNearestEven ); - uZ.ui = sign ? - sig32 : sig32; - z = uZ.i; - if ( z && ( ( z < 0 ) ^ sign ) ) goto invalid; - if ( exact && roundBits ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return z; - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - return sign ? -0x7FFFFFFF - 1 : 0x7FFFFFFF; - -} - diff --git a/softfloat/s_roundPackToI64.c b/softfloat/s_roundPackToI64.c deleted file mode 100755 index b2f5d63..0000000 --- a/softfloat/s_roundPackToI64.c +++ /dev/null @@ -1,52 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -int_fast64_t - softfloat_roundPackToI64( - bool sign, - uint_fast64_t sig64, - uint_fast64_t sig0, - int_fast8_t roundingMode, - bool exact - ) -{ - bool roundNearestEven, increment; - union { uint64_t ui; int64_t i; } uZ; - int_fast64_t z; - - roundNearestEven = ( roundingMode == softfloat_round_nearest_even ); - increment = ( UINT64_C( 0x8000000000000000 ) <= sig0 ); - if ( - ! roundNearestEven - && ( roundingMode != softfloat_round_nearest_maxMag ) - ) { - increment = - ( roundingMode != softfloat_round_minMag ) - && ( roundingMode - == ( sign ? softfloat_round_min : softfloat_round_max ) ) - && sig0; - } - if ( increment ) { - ++sig64; - if ( ! sig64 ) goto invalid; - sig64 &= - ~ ( ! ( sig0 & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ) - & roundNearestEven ); - } - uZ.ui = sign ? - sig64 : sig64; - z = uZ.i; - if ( z && ( ( z < 0 ) ^ sign ) ) goto invalid; - if ( exact && sig0 ) softfloat_exceptionFlags |= softfloat_flag_inexact; - return z; - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - return - sign ? - INT64_C( 0x7FFFFFFFFFFFFFFF ) - 1 - : INT64_C( 0x7FFFFFFFFFFFFFFF ); - -} - diff --git a/softfloat/s_roundPackToUI32.c b/softfloat/s_roundPackToUI32.c deleted file mode 100755 index ab44ec7..0000000 --- a/softfloat/s_roundPackToUI32.c +++ /dev/null @@ -1,44 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -uint_fast32_t - softfloat_roundPackToUI32( - bool sign, uint_fast64_t sig, int_fast8_t roundingMode, bool exact ) -{ - bool roundNearestEven; - int roundIncrement, roundBits; - uint_fast32_t z; - - roundNearestEven = ( roundingMode == softfloat_round_nearest_even ); - roundIncrement = 0x40; - if ( - ! roundNearestEven - && ( roundingMode != softfloat_round_nearest_maxMag ) - ) { - roundIncrement = - ( roundingMode == softfloat_round_minMag ) - || ( roundingMode - == ( sign ? softfloat_round_max : softfloat_round_min ) ) - ? 0 - : 0x7F; - } - roundBits = sig & 0x7F; - sig += roundIncrement; - if ( sig & UINT64_C( 0xFFFFFF8000000000 ) ) goto invalid; - z = sig>>7; - z &= ~ ( ! ( roundBits ^ 0x40 ) & roundNearestEven ); - if ( sign && z ) goto invalid; - if ( exact && roundBits ) { - softfloat_exceptionFlags |= softfloat_flag_inexact; - } - return z; - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - return 0xFFFFFFFF; - -} - diff --git a/softfloat/s_roundPackToUI64.c b/softfloat/s_roundPackToUI64.c deleted file mode 100755 index d42266f..0000000 --- a/softfloat/s_roundPackToUI64.c +++ /dev/null @@ -1,46 +0,0 @@ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "softfloat.h" - -uint_fast64_t - softfloat_roundPackToUI64( - bool sign, - uint_fast64_t sig64, - uint_fast64_t sig0, - int_fast8_t roundingMode, - bool exact - ) -{ - bool roundNearestEven, increment; - - roundNearestEven = ( roundingMode == softfloat_round_nearest_even ); - increment = ( UINT64_C( 0x8000000000000000 ) <= sig0 ); - if ( - ! roundNearestEven - && ( roundingMode != softfloat_round_nearest_maxMag ) - ) { - increment = - ( roundingMode != softfloat_round_minMag ) - && ( roundingMode - == ( sign ? softfloat_round_min : softfloat_round_max ) ) - && sig0; - } - if ( increment ) { - ++sig64; - if ( ! sig64 ) goto invalid; - sig64 &= - ~ ( ! ( sig0 & UINT64_C( 0x7FFFFFFFFFFFFFFF ) ) - & roundNearestEven ); - } - if ( sign && sig64 ) goto invalid; - if ( exact && sig0 ) softfloat_exceptionFlags |= softfloat_flag_inexact; - return sig64; - invalid: - softfloat_raiseFlags( softfloat_flag_invalid ); - return UINT64_C( 0xFFFFFFFFFFFFFFFF ); - -} - diff --git a/softfloat/s_shift128ExtraRightJam.c b/softfloat/s_shift128ExtraRightJam.c deleted file mode 100755 index 6c57974..0000000 --- a/softfloat/s_shift128ExtraRightJam.c +++ /dev/null @@ -1,38 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint128_extra - softfloat_shift128ExtraRightJam( - uint64_t a64, uint64_t a0, uint64_t extra, unsigned int count ) -{ - unsigned int negCount; - struct uint128_extra z; - - negCount = - count; - if ( count < 64 ) { - z.v64 = a64>>count; - z.v0 = a64<<( negCount & 63 ) | a0>>count; - z.extra = a0<<( negCount & 63 ); - } else { - z.v64 = 0; - if ( count == 64 ) { - z.v0 = a64; - z.extra = a0; - } else { - extra |= a0; - if ( count < 128 ) { - z.v0 = a64>>( count & 63 ); - z.extra = a64<<( negCount & 63 ); - } else { - z.v0 = 0; - z.extra = ( count == 128 ) ? a64 : ( a64 != 0 ); - } - } - } - z.extra |= ( extra != 0 ); - return z; - -} - diff --git a/softfloat/s_shift128RightJam.c b/softfloat/s_shift128RightJam.c deleted file mode 100755 index 5a4e188..0000000 --- a/softfloat/s_shift128RightJam.c +++ /dev/null @@ -1,31 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint128 - softfloat_shift128RightJam( uint64_t a64, uint64_t a0, unsigned int count ) -{ - unsigned int negCount; - struct uint128 z; - - if ( count < 64 ) { - negCount = - count; - z.v64 = a64>>( count & 63 ); - z.v0 = - a64<<( negCount & 63 ) | a0>>count - | ( (uint64_t) ( a0<<( negCount & 63 ) ) != 0 ); - } else { - z.v64 = 0; - z.v0 = - ( count < 128 ) - ? a64>>( count & 63 ) - | ( ( ( a64 & ( ( (uint64_t) 1<<( count & 63 ) ) - 1 ) ) - | a0 ) - != 0 ) - : ( ( a64 | a0 ) != 0 ); - } - return z; - -} - diff --git a/softfloat/s_shift32RightJam.c b/softfloat/s_shift32RightJam.c deleted file mode 100755 index b697a34..0000000 --- a/softfloat/s_shift32RightJam.c +++ /dev/null @@ -1,15 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -uint32_t softfloat_shift32RightJam( uint32_t a, unsigned int count ) -{ - - return - ( count < 32 ) - ? a>>count | ( (uint32_t) ( a<<( ( - count ) & 31 ) ) != 0 ) - : ( a != 0 ); - -} - diff --git a/softfloat/s_shift64ExtraRightJam.c b/softfloat/s_shift64ExtraRightJam.c deleted file mode 100755 index 167ea54..0000000 --- a/softfloat/s_shift64ExtraRightJam.c +++ /dev/null @@ -1,23 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint64_extra - softfloat_shift64ExtraRightJam( - uint64_t a, uint64_t extra, unsigned int count ) -{ - struct uint64_extra z; - - if ( count < 64 ) { - z.v = a>>count; - z.extra = a<<( ( - count ) & 63 ); - } else { - z.v = 0; - z.extra = ( count == 64 ) ? a : ( a != 0 ); - } - z.extra |= ( extra != 0 ); - return z; - -} - diff --git a/softfloat/s_shift64RightJam.c b/softfloat/s_shift64RightJam.c deleted file mode 100755 index ebebb61..0000000 --- a/softfloat/s_shift64RightJam.c +++ /dev/null @@ -1,15 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -uint64_t softfloat_shift64RightJam( uint64_t a, unsigned int count ) -{ - - return - ( count < 64 ) - ? a>>count | ( (uint64_t) ( a<<( ( - count ) & 63 ) ) != 0 ) - : ( a != 0 ); - -} - diff --git a/softfloat/s_shortShift128ExtraRightJam.c b/softfloat/s_shortShift128ExtraRightJam.c deleted file mode 100755 index c772740..0000000 --- a/softfloat/s_shortShift128ExtraRightJam.c +++ /dev/null @@ -1,20 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint128_extra - softfloat_shortShift128ExtraRightJam( - uint64_t a64, uint64_t a0, uint64_t extra, unsigned int count ) -{ - unsigned int negCount; - struct uint128_extra z; - - negCount = - count; - z.v64 = a64>>count; - z.v0 = a64<<( negCount & 63 ) | a0>>count; - z.extra = a0<<( negCount & 63 ) | ( extra != 0 ); - return z; - -} - diff --git a/softfloat/s_shortShift128Left.c b/softfloat/s_shortShift128Left.c deleted file mode 100755 index 9c29988..0000000 --- a/softfloat/s_shortShift128Left.c +++ /dev/null @@ -1,16 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint128 - softfloat_shortShift128Left( uint64_t a64, uint64_t a0, unsigned int count ) -{ - struct uint128 z; - - z.v64 = a64<>( ( - count ) & 63 ); - z.v0 = a0< -#include "platform.h" -#include "primitives.h" - -struct uint128 - softfloat_shortShift128Right( uint64_t a64, uint64_t a0, unsigned int count ) -{ - struct uint128 z; - - z.v64 = a64>>count; - z.v0 = a64<<( ( - count ) & 63 ) | a0>>count; - return z; - -} - diff --git a/softfloat/s_shortShift192Left.c b/softfloat/s_shortShift192Left.c deleted file mode 100755 index cf1e55d..0000000 --- a/softfloat/s_shortShift192Left.c +++ /dev/null @@ -1,20 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint192 - softfloat_shortShift192Left( - uint64_t a128, uint64_t a64, uint64_t a0, unsigned int count ) -{ - unsigned int negCount; - struct uint192 z; - - negCount = - count; - z.v128 = a128<>( negCount & 63 ); - z.v64 = a64<>( negCount & 63 ); - z.v0 = a0< -#include "platform.h" -#include "primitives.h" - -uint32_t softfloat_shortShift32Right1Jam( uint32_t a ) -{ - - return a>>1 | ( a & 1 ); - -} - diff --git a/softfloat/s_shortShift64ExtraRightJam.c b/softfloat/s_shortShift64ExtraRightJam.c deleted file mode 100755 index b861c67..0000000 --- a/softfloat/s_shortShift64ExtraRightJam.c +++ /dev/null @@ -1,17 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint64_extra - softfloat_shortShift64ExtraRightJam( - uint64_t a, uint64_t extra, unsigned int count ) -{ - struct uint64_extra z; - - z.v = a>>count; - z.extra = a<<( ( - count ) & 63 ) | ( extra != 0 ); - return z; - -} - diff --git a/softfloat/s_shortShift64RightJam.c b/softfloat/s_shortShift64RightJam.c deleted file mode 100755 index 0da6c93..0000000 --- a/softfloat/s_shortShift64RightJam.c +++ /dev/null @@ -1,12 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -uint64_t softfloat_shortShift64RightJam( uint64_t a, unsigned int count ) -{ - - return a>>count | ( ( a & ( ( (uint64_t) 1< -#include "platform.h" -#include "primitives.h" - -struct uint128 - softfloat_sub128( uint64_t a64, uint64_t a0, uint64_t b64, uint64_t b0 ) -{ - struct uint128 z; - - z.v0 = a0 - b0; - z.v64 = a64 - b64; - z.v64 -= ( a0 < b0 ); - return z; - -} - diff --git a/softfloat/s_sub192.c b/softfloat/s_sub192.c deleted file mode 100755 index 96f21c9..0000000 --- a/softfloat/s_sub192.c +++ /dev/null @@ -1,30 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" - -struct uint192 - softfloat_sub192( - uint64_t a128, - uint64_t a64, - uint64_t a0, - uint64_t b128, - uint64_t b64, - uint64_t b0 - ) -{ - struct uint192 z; - unsigned int borrow64, borrow128; - - z.v0 = a0 - b0; - borrow64 = ( a0 < b0 ); - z.v64 = a64 - b64; - borrow128 = ( a64 < b64 ); - z.v128 = a128 - b128; - borrow128 += ( z.v64 < borrow64 ); - z.v64 -= borrow64; - z.v128 -= borrow128; - return z; - -} - diff --git a/softfloat/s_subMagsF32.c b/softfloat/s_subMagsF32.c deleted file mode 100755 index 0c83b02..0000000 --- a/softfloat/s_subMagsF32.c +++ /dev/null @@ -1,81 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float32_t - softfloat_subMagsF32( uint_fast32_t uiA, uint_fast32_t uiB, bool signZ ) -{ - int_fast16_t expA; - uint_fast32_t sigA; - int_fast16_t expB; - uint_fast32_t sigB; - int_fast16_t expDiff; - uint_fast32_t uiZ; - int_fast16_t expZ; - uint_fast32_t sigZ; - union ui32_f32 uZ; - - expA = expF32UI( uiA ); - sigA = fracF32UI( uiA ); - expB = expF32UI( uiB ); - sigB = fracF32UI( uiB ); - expDiff = expA - expB; - sigA <<= 7; - sigB <<= 7; - if ( 0 < expDiff ) goto expABigger; - if ( expDiff < 0 ) goto expBBigger; - if ( expA == 0xFF ) { - if ( sigA | sigB ) goto propagateNaN; - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF32UI; - goto uiZ; - } - if ( ! expA ) { - expA = 1; - expB = 1; - } - if ( sigB < sigA ) goto aBigger; - if ( sigA < sigB ) goto bBigger; - uiZ = packToF32UI( softfloat_roundingMode == softfloat_round_min, 0, 0 ); - goto uiZ; - expBBigger: - if ( expB == 0xFF ) { - if ( sigB ) goto propagateNaN; - uiZ = packToF32UI( signZ ^ 1, 0xFF, 0 ); - goto uiZ; - } - sigA += expA ? 0x40000000 : sigA; - sigA = softfloat_shift32RightJam( sigA, - expDiff ); - sigB |= 0x40000000; - bBigger: - signZ ^= 1; - expZ = expB; - sigZ = sigB - sigA; - goto normRoundPack; - expABigger: - if ( expA == 0xFF ) { - if ( sigA ) goto propagateNaN; - uiZ = uiA; - goto uiZ; - } - sigB += expB ? 0x40000000 : sigB; - sigB = softfloat_shift32RightJam( sigB, expDiff ); - sigA |= 0x40000000; - aBigger: - expZ = expA; - sigZ = sigA - sigB; - normRoundPack: - return softfloat_normRoundPackToF32( signZ, expZ - 1, sigZ ); - propagateNaN: - uiZ = softfloat_propagateNaNF32UI( uiA, uiB ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/s_subMagsF64.c b/softfloat/s_subMagsF64.c deleted file mode 100755 index 45b81ba..0000000 --- a/softfloat/s_subMagsF64.c +++ /dev/null @@ -1,81 +0,0 @@ - -#include -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -float64_t - softfloat_subMagsF64( uint_fast64_t uiA, uint_fast64_t uiB, bool signZ ) -{ - int_fast16_t expA; - uint_fast64_t sigA; - int_fast16_t expB; - uint_fast64_t sigB; - int_fast16_t expDiff; - uint_fast64_t uiZ; - int_fast16_t expZ; - uint_fast64_t sigZ; - union ui64_f64 uZ; - - expA = expF64UI( uiA ); - sigA = fracF64UI( uiA ); - expB = expF64UI( uiB ); - sigB = fracF64UI( uiB ); - expDiff = expA - expB; - sigA <<= 10; - sigB <<= 10; - if ( 0 < expDiff ) goto expABigger; - if ( expDiff < 0 ) goto expBBigger; - if ( expA == 0x7FF ) { - if ( sigA | sigB ) goto propagateNaN; - softfloat_raiseFlags( softfloat_flag_invalid ); - uiZ = defaultNaNF64UI; - goto uiZ; - } - if ( ! expA ) { - expA = 1; - expB = 1; - } - if ( sigB < sigA ) goto aBigger; - if ( sigA < sigB ) goto bBigger; - uiZ = packToF64UI( softfloat_roundingMode == softfloat_round_min, 0, 0 ); - goto uiZ; - expBBigger: - if ( expB == 0x7FF ) { - if ( sigB ) goto propagateNaN; - uiZ = packToF64UI( signZ ^ 1, 0x7FF, 0 ); - goto uiZ; - } - sigA += expA ? UINT64_C( 0x4000000000000000 ) : sigA; - sigA = softfloat_shift64RightJam( sigA, - expDiff ); - sigB |= UINT64_C( 0x4000000000000000 ); - bBigger: - signZ ^= 1; - expZ = expB; - sigZ = sigB - sigA; - goto normRoundPack; - expABigger: - if ( expA == 0x7FF ) { - if ( sigA ) goto propagateNaN; - uiZ = uiA; - goto uiZ; - } - sigB += expB ? UINT64_C( 0x4000000000000000 ) : sigB; - sigB = softfloat_shift64RightJam( sigB, expDiff ); - sigA |= UINT64_C( 0x4000000000000000 ); - aBigger: - expZ = expA; - sigZ = sigA - sigB; - normRoundPack: - return softfloat_normRoundPackToF64( signZ, expZ - 1, sigZ ); - propagateNaN: - uiZ = softfloat_propagateNaNF64UI( uiA, uiB ); - uiZ: - uZ.ui = uiZ; - return uZ.f; - -} - diff --git a/softfloat/softfloat.ac b/softfloat/softfloat.ac deleted file mode 100644 index e69de29..0000000 diff --git a/softfloat/softfloat.h b/softfloat/softfloat.h deleted file mode 100755 index 3eddeed..0000000 --- a/softfloat/softfloat.h +++ /dev/null @@ -1,233 +0,0 @@ - -#ifndef softfloat_h -#define softfloat_h - -#ifdef __cplusplus -extern "C" { -#endif - -/*** UPDATE COMMENTS. ***/ - -/*============================================================================ - -This C header file is part of the SoftFloat IEEE Floating-point Arithmetic -Package, Release 2b. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -#include "softfloat_types.h" - -/*---------------------------------------------------------------------------- -| Software floating-point underflow tininess-detection mode. -*----------------------------------------------------------------------------*/ -extern int_fast8_t softfloat_detectTininess; -enum { - softfloat_tininess_beforeRounding = 0, - softfloat_tininess_afterRounding = 1 -}; - -/*---------------------------------------------------------------------------- -| Software floating-point rounding mode. -*----------------------------------------------------------------------------*/ -extern int_fast8_t softfloat_roundingMode; -enum { - softfloat_round_nearest_even = 0, - softfloat_round_minMag = 1, - softfloat_round_min = 2, - softfloat_round_max = 3, - softfloat_round_nearest_maxMag = 4 -}; - -/*---------------------------------------------------------------------------- -| Software floating-point exception flags. -*----------------------------------------------------------------------------*/ -extern int_fast8_t softfloat_exceptionFlags; -enum { - softfloat_flag_inexact = 1, - softfloat_flag_underflow = 2, - softfloat_flag_overflow = 4, - softfloat_flag_infinity = 8, - softfloat_flag_invalid = 16 -}; - -/*---------------------------------------------------------------------------- -| Routine to raise any or all of the software floating-point exception flags. -*----------------------------------------------------------------------------*/ -void softfloat_raiseFlags( int_fast8_t ); - -/*---------------------------------------------------------------------------- -| Integer-to-floating-point conversion routines. -*----------------------------------------------------------------------------*/ -float32_t ui32_to_f32( uint_fast32_t ); -float64_t ui32_to_f64( uint_fast32_t ); -floatx80_t ui32_to_fx80( uint_fast32_t ); -float128_t ui32_to_f128( uint_fast32_t ); -float32_t ui64_to_f32( uint_fast64_t ); -float64_t ui64_to_f64( uint_fast64_t ); -floatx80_t ui64_to_fx80( uint_fast64_t ); -float128_t ui64_to_f128( uint_fast64_t ); -float32_t i32_to_f32( int_fast32_t ); -float64_t i32_to_f64( int_fast32_t ); -floatx80_t i32_to_fx80( int_fast32_t ); -float128_t i32_to_f128( int_fast32_t ); -float32_t i64_to_f32( int_fast64_t ); -float64_t i64_to_f64( int_fast64_t ); -floatx80_t i64_to_fx80( int_fast64_t ); -float128_t i64_to_f128( int_fast64_t ); - -/*---------------------------------------------------------------------------- -| 32-bit (single-precision) floating-point operations. -*----------------------------------------------------------------------------*/ -uint_fast32_t f32_to_ui32( float32_t, int_fast8_t, bool ); -uint_fast64_t f32_to_ui64( float32_t, int_fast8_t, bool ); -int_fast32_t f32_to_i32( float32_t, int_fast8_t, bool ); -int_fast64_t f32_to_i64( float32_t, int_fast8_t, bool ); -uint_fast32_t f32_to_ui32_r_minMag( float32_t, bool ); -uint_fast64_t f32_to_ui64_r_minMag( float32_t, bool ); -int_fast32_t f32_to_i32_r_minMag( float32_t, bool ); -int_fast64_t f32_to_i64_r_minMag( float32_t, bool ); -float64_t f32_to_f64( float32_t ); -floatx80_t f32_to_fx80( float32_t ); -float128_t f32_to_f128( float32_t ); -float32_t f32_roundToInt( float32_t, int_fast8_t, bool ); -float32_t f32_add( float32_t, float32_t ); -float32_t f32_sub( float32_t, float32_t ); -float32_t f32_mul( float32_t, float32_t ); -float32_t f32_mulAdd( float32_t, float32_t, float32_t ); -float32_t f32_div( float32_t, float32_t ); -float32_t f32_rem( float32_t, float32_t ); -float32_t f32_sqrt( float32_t ); -bool f32_eq( float32_t, float32_t ); -bool f32_le( float32_t, float32_t ); -bool f32_lt( float32_t, float32_t ); -bool f32_eq_signaling( float32_t, float32_t ); -bool f32_le_quiet( float32_t, float32_t ); -bool f32_lt_quiet( float32_t, float32_t ); -bool f32_isSignalingNaN( float32_t ); - -/*---------------------------------------------------------------------------- -| 64-bit (double-precision) floating-point operations. -*----------------------------------------------------------------------------*/ -uint_fast32_t f64_to_ui32( float64_t, int_fast8_t, bool ); -uint_fast64_t f64_to_ui64( float64_t, int_fast8_t, bool ); -int_fast32_t f64_to_i32( float64_t, int_fast8_t, bool ); -int_fast64_t f64_to_i64( float64_t, int_fast8_t, bool ); -uint_fast32_t f64_to_ui32_r_minMag( float64_t, bool ); -uint_fast64_t f64_to_ui64_r_minMag( float64_t, bool ); -int_fast32_t f64_to_i32_r_minMag( float64_t, bool ); -int_fast64_t f64_to_i64_r_minMag( float64_t, bool ); -float32_t f64_to_f32( float64_t ); -floatx80_t f64_to_fx80( float64_t ); -float128_t f64_to_f128( float64_t ); -float64_t f64_roundToInt( float64_t, int_fast8_t, bool ); -float64_t f64_add( float64_t, float64_t ); -float64_t f64_sub( float64_t, float64_t ); -float64_t f64_mul( float64_t, float64_t ); -float64_t f64_mulAdd( float64_t, float64_t, float64_t ); -float64_t f64_div( float64_t, float64_t ); -float64_t f64_rem( float64_t, float64_t ); -float64_t f64_sqrt( float64_t ); -bool f64_eq( float64_t, float64_t ); -bool f64_le( float64_t, float64_t ); -bool f64_lt( float64_t, float64_t ); -bool f64_eq_signaling( float64_t, float64_t ); -bool f64_le_quiet( float64_t, float64_t ); -bool f64_lt_quiet( float64_t, float64_t ); -bool f64_isSignalingNaN( float64_t ); - -/*---------------------------------------------------------------------------- -| Extended double-precision rounding precision. Valid values are 32, 64, and -| 80. -*----------------------------------------------------------------------------*/ -extern int_fast8_t floatx80_roundingPrecision; - -/*---------------------------------------------------------------------------- -| Extended double-precision floating-point operations. -*----------------------------------------------------------------------------*/ -uint_fast32_t fx80_to_ui32( floatx80_t, int_fast8_t, bool ); -uint_fast64_t fx80_to_ui64( floatx80_t, int_fast8_t, bool ); -int_fast32_t fx80_to_i32( floatx80_t, int_fast8_t, bool ); -int_fast64_t fx80_to_i64( floatx80_t, int_fast8_t, bool ); -uint_fast32_t fx80_to_ui32_r_minMag( floatx80_t, bool ); -uint_fast64_t fx80_to_ui64_r_minMag( floatx80_t, bool ); -int_fast32_t fx80_to_i32_r_minMag( floatx80_t, bool ); -int_fast64_t fx80_to_i64_r_minMag( floatx80_t, bool ); -float32_t fx80_to_f32( floatx80_t ); -float64_t fx80_to_f64( floatx80_t ); -float128_t fx80_to_f128( floatx80_t ); -floatx80_t fx80_roundToInt( floatx80_t, int_fast8_t, bool ); -floatx80_t fx80_add( floatx80_t, floatx80_t ); -floatx80_t fx80_sub( floatx80_t, floatx80_t ); -floatx80_t fx80_mul( floatx80_t, floatx80_t ); -floatx80_t fx80_mulAdd( floatx80_t, floatx80_t, floatx80_t ); -floatx80_t fx80_div( floatx80_t, floatx80_t ); -floatx80_t fx80_rem( floatx80_t, floatx80_t ); -floatx80_t fx80_sqrt( floatx80_t ); -bool fx80_eq( floatx80_t, floatx80_t ); -bool fx80_le( floatx80_t, floatx80_t ); -bool fx80_lt( floatx80_t, floatx80_t ); -bool fx80_eq_signaling( floatx80_t, floatx80_t ); -bool fx80_le_quiet( floatx80_t, floatx80_t ); -bool fx80_lt_quiet( floatx80_t, floatx80_t ); -bool fx80_isSignalingNaN( floatx80_t ); - -/*---------------------------------------------------------------------------- -| 128-bit (quadruple-precision) floating-point operations. -*----------------------------------------------------------------------------*/ -uint_fast32_t f128_to_ui32( float128_t, int_fast8_t, bool ); -uint_fast64_t f128_to_ui64( float128_t, int_fast8_t, bool ); -int_fast32_t f128_to_i32( float128_t, int_fast8_t, bool ); -int_fast64_t f128_to_i64( float128_t, int_fast8_t, bool ); -uint_fast32_t f128_to_ui32_r_minMag( float128_t, bool ); -uint_fast64_t f128_to_ui64_r_minMag( float128_t, bool ); -int_fast32_t f128_to_i32_r_minMag( float128_t, bool ); -int_fast64_t f128_to_i64_r_minMag( float128_t, bool ); -float32_t f128_to_f32( float128_t ); -float64_t f128_to_f64( float128_t ); -floatx80_t f128_to_fx80( float128_t ); -float128_t f128_roundToInt( float128_t, int_fast8_t, bool ); -float128_t f128_add( float128_t, float128_t ); -float128_t f128_sub( float128_t, float128_t ); -float128_t f128_mul( float128_t, float128_t ); -float128_t f128_mulAdd( float128_t, float128_t, float128_t ); -float128_t f128_div( float128_t, float128_t ); -float128_t f128_rem( float128_t, float128_t ); -float128_t f128_sqrt( float128_t ); -bool f128_eq( float128_t, float128_t ); -bool f128_le( float128_t, float128_t ); -bool f128_lt( float128_t, float128_t ); -bool f128_eq_signaling( float128_t, float128_t ); -bool f128_le_quiet( float128_t, float128_t ); -bool f128_lt_quiet( float128_t, float128_t ); -bool f128_isSignalingNaN( float128_t ); - -#ifdef __cplusplus -} -#endif - -#endif - diff --git a/softfloat/softfloat.mk.in b/softfloat/softfloat.mk.in deleted file mode 100644 index 59993cb..0000000 --- a/softfloat/softfloat.mk.in +++ /dev/null @@ -1,113 +0,0 @@ -softfloat_subproject_deps = \ - sotfloat_riscv \ - -softfloat_hdrs = \ - internals.h \ - primitives.h \ - softfloat.h \ - -softfloat_c_srcs = \ - f32_add.c \ - f32_div.c \ - f32_eq.c \ - f32_eq_signaling.c \ - f32_isSignalingNaN.c \ - f32_le.c \ - f32_le_quiet.c \ - f32_lt.c \ - f32_lt_quiet.c \ - f32_mulAdd.c \ - f32_mul.c \ - f32_rem.c \ - f32_roundToInt.c \ - f32_sqrt.c \ - f32_sub.c \ - f32_to_f64.c \ - f32_to_i32.c \ - f32_to_i32_r_minMag.c \ - f32_to_i64.c \ - f32_to_i64_r_minMag.c \ - f32_to_ui32.c \ - f32_to_ui32_r_minMag.c \ - f32_to_ui64.c \ - f32_to_ui64_r_minMag.c \ - f64_add.c \ - f64_div.c \ - f64_eq.c \ - f64_eq_signaling.c \ - f64_isSignalingNaN.c \ - f64_le.c \ - f64_le_quiet.c \ - f64_lt.c \ - f64_lt_quiet.c \ - f64_mulAdd.c \ - f64_mul.c \ - f64_rem.c \ - f64_roundToInt.c \ - f64_sqrt.c \ - f64_sub.c \ - f64_to_f32.c \ - f64_to_i32.c \ - f64_to_i32_r_minMag.c \ - f64_to_i64.c \ - f64_to_i64_r_minMag.c \ - f64_to_ui32.c \ - f64_to_ui32_r_minMag.c \ - f64_to_ui64.c \ - f64_to_ui64_r_minMag.c \ - i32_to_f32.c \ - i32_to_f64.c \ - i64_to_f32.c \ - i64_to_f64.c \ - s_add128.c \ - s_add192.c \ - s_addMagsF32.c \ - s_addMagsF64.c \ - s_countLeadingZeros32.c \ - s_countLeadingZeros64.c \ - s_countLeadingZeros8.c \ - s_eq128.c \ - s_estimateDiv128To64.c \ - s_estimateSqrt32.c \ - s_le128.c \ - s_lt128.c \ - s_mul128By64To192.c \ - s_mul128To256.c \ - s_mul64To128.c \ - s_mulAddF32.c \ - s_mulAddF64.c \ - s_normRoundPackToF32.c \ - s_normRoundPackToF64.c \ - s_normSubnormalF32Sig.c \ - s_normSubnormalF64Sig.c \ - softfloat_state.c \ - s_roundPackToF32.c \ - s_roundPackToF64.c \ - s_roundPackToI32.c \ - s_roundPackToI64.c \ - s_roundPackToUI32.c \ - s_roundPackToUI64.c \ - s_shift128ExtraRightJam.c \ - s_shift128RightJam.c \ - s_shift32RightJam.c \ - s_shift64ExtraRightJam.c \ - s_shift64RightJam.c \ - s_shortShift128ExtraRightJam.c \ - s_shortShift128Left.c \ - s_shortShift128Right.c \ - s_shortShift192Left.c \ - s_shortShift32Right1Jam.c \ - s_shortShift64ExtraRightJam.c \ - s_shortShift64RightJam.c \ - s_sub128.c \ - s_sub192.c \ - s_subMagsF32.c \ - s_subMagsF64.c \ - ui32_to_f32.c \ - ui32_to_f64.c \ - ui64_to_f32.c \ - ui64_to_f64.c \ - -softfloat_test_srcs = - -softfloat_install_prog_srcs = diff --git a/softfloat/softfloat_state.c b/softfloat/softfloat_state.c deleted file mode 100755 index 8859089..0000000 --- a/softfloat/softfloat_state.c +++ /dev/null @@ -1,19 +0,0 @@ - -/*** COMMENTS. ***/ - -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Floating-point rounding mode, extended double-precision rounding precision, -| and exception flags. -*----------------------------------------------------------------------------*/ -int_fast8_t softfloat_roundingMode = softfloat_round_nearest_even; -int_fast8_t softfloat_detectTininess = init_detectTininess; -int_fast8_t softfloat_exceptionFlags = 0; - -int_fast8_t floatx80_roundingPrecision = 80; - diff --git a/softfloat/ui32_to_f32.c b/softfloat/ui32_to_f32.c deleted file mode 100755 index ba0fc1a..0000000 --- a/softfloat/ui32_to_f32.c +++ /dev/null @@ -1,25 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -float32_t ui32_to_f32( uint_fast32_t a ) -{ - union ui32_f32 uZ; - - if ( ! a ) { - uZ.ui = 0; - return uZ.f; - } - if ( a & 0x80000000 ) { - return - softfloat_roundPackToF32( - 0, 0x9D, softfloat_shortShift32Right1Jam( a ) ); - } else { - return softfloat_normRoundPackToF32( 0, 0x9C, a ); - } - -} - diff --git a/softfloat/ui32_to_f64.c b/softfloat/ui32_to_f64.c deleted file mode 100755 index d0bd177..0000000 --- a/softfloat/ui32_to_f64.c +++ /dev/null @@ -1,26 +0,0 @@ - -#include -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -float64_t ui32_to_f64( uint_fast32_t a ) -{ - uint_fast64_t uiZ; - int shiftCount; - union ui64_f64 uZ; - - if ( ! a ) { - uiZ = 0; - } else { - shiftCount = softfloat_countLeadingZeros32( a ) + 21; - uiZ = - packToF64UI( - 0, 0x432 - shiftCount, (uint_fast64_t) a< -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -float32_t ui64_to_f32( uint_fast64_t a ) -{ - int shiftCount; - union ui32_f32 u; - uint_fast32_t sig; - - shiftCount = softfloat_countLeadingZeros64( a ) - 40; - if ( 0 <= shiftCount ) { - u.ui = - a ? packToF32UI( - 0, 0x95 - shiftCount, (uint_fast32_t) a< -#include "platform.h" -#include "primitives.h" -#include "internals.h" -#include "softfloat.h" - -float64_t ui64_to_f64( uint_fast64_t a ) -{ - union ui64_f64 uZ; - - if ( ! a ) { - uZ.ui = 0; - return uZ.f; - } - if ( a & UINT64_C( 0x8000000000000000 ) ) { - return - softfloat_roundPackToF64( - 0, 0x43D, softfloat_shortShift64RightJam( a, 1 ) ); - } else { - return softfloat_normRoundPackToF64( 0, 0x43C, a ); - } - -} - diff --git a/softfloat_riscv/platform.h b/softfloat_riscv/platform.h deleted file mode 100755 index 6c54313..0000000 --- a/softfloat_riscv/platform.h +++ /dev/null @@ -1,42 +0,0 @@ - -/*============================================================================ - -*** FIX. - -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2b. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -#define LITTLEENDIAN - -#ifndef UINT64_C -# define UINT64_C(x) (x ## ULL) -# define INT64_C(x) (x ## LL) -#endif diff --git a/softfloat_riscv/s_commonNaNToF32UI.c b/softfloat_riscv/s_commonNaNToF32UI.c deleted file mode 100755 index 61f2735..0000000 --- a/softfloat_riscv/s_commonNaNToF32UI.c +++ /dev/null @@ -1,17 +0,0 @@ - -#include -#include "platform.h" -#include "specialize.h" - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the single- -| precision floating-point format. -*----------------------------------------------------------------------------*/ - -uint_fast32_t softfloat_commonNaNToF32UI( struct commonNaN a ) -{ - - return (uint_fast32_t) a.sign<<31 | 0x7FFFFFFF; - -} - diff --git a/softfloat_riscv/s_commonNaNToF64UI.c b/softfloat_riscv/s_commonNaNToF64UI.c deleted file mode 100755 index da36c04..0000000 --- a/softfloat_riscv/s_commonNaNToF64UI.c +++ /dev/null @@ -1,18 +0,0 @@ - -#include -#include "platform.h" -#include "specialize.h" - -/*---------------------------------------------------------------------------- -| Returns the result of converting the canonical NaN `a' to the double- -| precision floating-point format. -*----------------------------------------------------------------------------*/ - -uint_fast64_t softfloat_commonNaNToF64UI( struct commonNaN a ) -{ - - return - (uint_fast64_t) a.sign<<63 | UINT64_C( 0x7FFFFFFFFFFFFFFF ); - -} - diff --git a/softfloat_riscv/s_f32UIToCommonNaN.c b/softfloat_riscv/s_f32UIToCommonNaN.c deleted file mode 100755 index 9ee0db9..0000000 --- a/softfloat_riscv/s_f32UIToCommonNaN.c +++ /dev/null @@ -1,25 +0,0 @@ - -#include -#include "platform.h" -#include "specialize.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Returns the result of converting the single-precision floating-point NaN -| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -| exception is raised. -*----------------------------------------------------------------------------*/ -struct commonNaN softfloat_f32UIToCommonNaN( uint_fast32_t uiA ) -{ - struct commonNaN z; - - if ( softfloat_isSigNaNF32UI( uiA ) ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - z.sign = uiA>>31; - z.v64 = (uint_fast64_t) 0x7FFFF <<41; - z.v0 = 0; - return z; - -} - diff --git a/softfloat_riscv/s_f64UIToCommonNaN.c b/softfloat_riscv/s_f64UIToCommonNaN.c deleted file mode 100755 index 84d8ca0..0000000 --- a/softfloat_riscv/s_f64UIToCommonNaN.c +++ /dev/null @@ -1,25 +0,0 @@ - -#include -#include "platform.h" -#include "specialize.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Returns the result of converting the double-precision floating-point NaN -| `a' to the canonical NaN format. If `a' is a signaling NaN, the invalid -| exception is raised. -*----------------------------------------------------------------------------*/ -struct commonNaN softfloat_f64UIToCommonNaN( uint_fast64_t uiA ) -{ - struct commonNaN z; - - if ( softfloat_isSigNaNF64UI( uiA ) ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - z.sign = uiA>>63; - z.v64 = (uint_fast64_t) 0xFFFFFFFFFFFFF <<12; - z.v0 = 0; - return z; - -} - diff --git a/softfloat_riscv/s_isSigNaNF32UI.c b/softfloat_riscv/s_isSigNaNF32UI.c deleted file mode 100755 index 0a9c33f..0000000 --- a/softfloat_riscv/s_isSigNaNF32UI.c +++ /dev/null @@ -1,13 +0,0 @@ - -#include -#include -#include "platform.h" -#include "specialize.h" - -bool softfloat_isSigNaNF32UI( uint_fast32_t ui ) -{ - - return ( ( ui>>22 & 0x1FF ) == 0x1FE ) && ( ui & 0x003FFFFF ); - -} - diff --git a/softfloat_riscv/s_isSigNaNF64UI.c b/softfloat_riscv/s_isSigNaNF64UI.c deleted file mode 100755 index d255213..0000000 --- a/softfloat_riscv/s_isSigNaNF64UI.c +++ /dev/null @@ -1,15 +0,0 @@ - -#include -#include -#include "platform.h" -#include "specialize.h" - -bool softfloat_isSigNaNF64UI( uint_fast64_t ui ) -{ - - return - ( ( ui>>51 & 0xFFF ) == 0xFFE ) - && ( ui & UINT64_C( 0x0007FFFFFFFFFFFF ) ); - -} - diff --git a/softfloat_riscv/s_propagateNaNF32UI.c b/softfloat_riscv/s_propagateNaNF32UI.c deleted file mode 100755 index 07774e8..0000000 --- a/softfloat_riscv/s_propagateNaNF32UI.c +++ /dev/null @@ -1,55 +0,0 @@ - -/*** UPDATE COMMENTS. ***/ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Takes two single-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -uint_fast32_t - softfloat_propagateNaNF32UI( uint_fast32_t uiA, uint_fast32_t uiB ) -{ - bool isNaNA, isSigNaNA, isNaNB, isSigNaNB; - uint_fast32_t uiMagA, uiMagB; - - /*------------------------------------------------------------------------ - *------------------------------------------------------------------------*/ - isNaNA = isNaNF32UI( uiA ); - isSigNaNA = softfloat_isSigNaNF32UI( uiA ); - isNaNB = isNaNF32UI( uiB ); - isSigNaNB = softfloat_isSigNaNF32UI( uiB ); - /*------------------------------------------------------------------------ - | Make NaNs non-signaling. - *------------------------------------------------------------------------*/ - uiA |= 0x00400000; - uiB |= 0x00400000; - /*------------------------------------------------------------------------ - *------------------------------------------------------------------------*/ - if ( isSigNaNA | isSigNaNB ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - if ( isSigNaNA ) { - if ( isSigNaNB ) goto returnLargerSignificand; - return isNaNB ? uiB : uiA; - } else if ( isNaNA ) { - if ( isSigNaNB || ! isNaNB ) return uiA; - returnLargerSignificand: - uiMagA = uiA<<1; - uiMagB = uiB<<1; - if ( uiMagA < uiMagB ) return uiB; - if ( uiMagB < uiMagA ) return uiA; - return ( uiA < uiB ) ? uiA : uiB; - } else { - return uiB; - } - -} - diff --git a/softfloat_riscv/s_propagateNaNF64UI.c b/softfloat_riscv/s_propagateNaNF64UI.c deleted file mode 100755 index 0ff6446..0000000 --- a/softfloat_riscv/s_propagateNaNF64UI.c +++ /dev/null @@ -1,55 +0,0 @@ - -/*** UPDATE COMMENTS. ***/ - -#include -#include -#include "platform.h" -#include "internals.h" -#include "specialize.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Takes two double-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ - -uint_fast64_t - softfloat_propagateNaNF64UI( uint_fast64_t uiA, uint_fast64_t uiB ) -{ - bool isNaNA, isSigNaNA, isNaNB, isSigNaNB; - uint_fast64_t uiMagA, uiMagB; - - /*------------------------------------------------------------------------ - *------------------------------------------------------------------------*/ - isNaNA = isNaNF64UI( uiA ); - isSigNaNA = softfloat_isSigNaNF64UI( uiA ); - isNaNB = isNaNF64UI( uiB ); - isSigNaNB = softfloat_isSigNaNF64UI( uiB ); - /*------------------------------------------------------------------------ - | Make NaNs non-signaling. - *------------------------------------------------------------------------*/ - uiA |= UINT64_C( 0x0008000000000000 ); - uiB |= UINT64_C( 0x0008000000000000 ); - /*------------------------------------------------------------------------ - *------------------------------------------------------------------------*/ - if ( isSigNaNA | isSigNaNB ) { - softfloat_raiseFlags( softfloat_flag_invalid ); - } - if ( isSigNaNA ) { - if ( isSigNaNB ) goto returnLargerSignificand; - return isNaNB ? uiB : uiA; - } else if ( isNaNA ) { - if ( isSigNaNB || ! isNaNB ) return uiA; - returnLargerSignificand: - uiMagA = uiA & UINT64_C( 0x7FFFFFFFFFFFFFFF ); - uiMagB = uiB & UINT64_C( 0x7FFFFFFFFFFFFFFF ); - if ( uiMagA < uiMagB ) return uiB; - if ( uiMagB < uiMagA ) return uiA; - return ( uiA < uiB ) ? uiA : uiB; - } else { - return uiB; - } - -} - diff --git a/softfloat_riscv/softfloat_raiseFlags.c b/softfloat_riscv/softfloat_raiseFlags.c deleted file mode 100755 index c0c0dc8..0000000 --- a/softfloat_riscv/softfloat_raiseFlags.c +++ /dev/null @@ -1,51 +0,0 @@ - -/*============================================================================ - -*** FIX. - -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2b. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -#include "platform.h" -#include "softfloat.h" - -/*---------------------------------------------------------------------------- -| Raises the exceptions specified by `flags'. Floating-point traps can be -| defined here if desired. It is currently not possible for such a trap -| to substitute a result value. If traps are not implemented, this routine -| should be simply `float_exception_flags |= flags;'. -*----------------------------------------------------------------------------*/ - -void softfloat_raiseFlags( int_fast8_t flags ) -{ - - softfloat_exceptionFlags |= flags; - -} - diff --git a/softfloat_riscv/softfloat_riscv.ac b/softfloat_riscv/softfloat_riscv.ac deleted file mode 100644 index e69de29..0000000 diff --git a/softfloat_riscv/softfloat_riscv.mk.in b/softfloat_riscv/softfloat_riscv.mk.in deleted file mode 100644 index 0b898ed..0000000 --- a/softfloat_riscv/softfloat_riscv.mk.in +++ /dev/null @@ -1,21 +0,0 @@ -softfloat_riscv_subproject_deps = \ - -softfloat_riscv_hdrs = \ - softfloat_types.h \ - platform.h \ - specialize.h \ - -softfloat_riscv_c_srcs = \ - softfloat_raiseFlags.c \ - s_commonNaNToF32UI.c \ - s_commonNaNToF64UI.c \ - s_f32UIToCommonNaN.c \ - s_f64UIToCommonNaN.c \ - s_isSigNaNF32UI.c \ - s_isSigNaNF64UI.c \ - s_propagateNaNF32UI.c \ - s_propagateNaNF64UI.c \ - -softfloat_riscv_test_srcs = - -softfloat_riscv_install_prog_srcs = diff --git a/softfloat_riscv/softfloat_types.h b/softfloat_riscv/softfloat_types.h deleted file mode 100755 index 9fada89..0000000 --- a/softfloat_riscv/softfloat_types.h +++ /dev/null @@ -1,16 +0,0 @@ - -#ifndef softfloat_types_h -#define softfloat_types_h - -/*** COMMENTS. ***/ - -#include -#include - -typedef uint32_t float32_t; -typedef uint64_t float64_t; -typedef struct { uint64_t v; uint16_t x; } floatx80_t; -typedef struct { uint64_t v[ 2 ]; } float128_t; - -#endif - diff --git a/softfloat_riscv/specialize.h b/softfloat_riscv/specialize.h deleted file mode 100755 index bf57bc9..0000000 --- a/softfloat_riscv/specialize.h +++ /dev/null @@ -1,113 +0,0 @@ - -/*============================================================================ - -*** FIX. - -This C source fragment is part of the SoftFloat IEC/IEEE Floating-point -Arithmetic Package, Release 2b. - -Written by John R. Hauser. This work was made possible in part by the -International Computer Science Institute, located at Suite 600, 1947 Center -Street, Berkeley, California 94704. Funding was partially provided by the -National Science Foundation under grant MIP-9311980. The original version -of this code was written as part of a project to build a fixed-point vector -processor in collaboration with the University of California at Berkeley, -overseen by Profs. Nelson Morgan and John Wawrzynek. More information -is available through the Web page `http://www.cs.berkeley.edu/~jhauser/ -arithmetic/SoftFloat.html'. - -THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has -been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES -RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS -AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES, -COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE -EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE -INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR -OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE. - -Derivative works are acceptable, even for commercial purposes, so long as -(1) the source code for the derivative work includes prominent notice that -the work is derivative, and (2) the source code includes prominent notice with -these four paragraphs for those parts of this code that are retained. - -=============================================================================*/ - -#include -#include - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -#define init_detectTininess softfloat_tininess_beforeRounding; - -/*---------------------------------------------------------------------------- -| Structure used to transfer NaN representations from one format to another. -*----------------------------------------------------------------------------*/ -struct commonNaN { - bool sign; - uint64_t v64, v0; -}; - -/*---------------------------------------------------------------------------- -| The pattern for a default generated single-precision NaN. -*----------------------------------------------------------------------------*/ -#define defaultNaNF32UI 0xFFFFFFFF - -/*---------------------------------------------------------------------------- -| Returns 1 if the single-precision floating-point value `a' is a signaling -| NaN; otherwise, returns 0. -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 1 <= INLINE_LEVEL ) -INLINE bool softfloat_isSigNaNF32UI( uint_fast32_t ui ) - { return ( ( ui>>22 & 0x1FF ) == 0x1FE ) && ( ui & 0x003FFFFF ); } -#else -bool softfloat_isSigNaNF32UI( uint_fast32_t ); -#endif - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -struct commonNaN softfloat_f32UIToCommonNaN( uint_fast32_t ); -#if defined INLINE_LEVEL && ( 1 <= INLINE_LEVEL ) -INLINE uint_fast32_t softfloat_commonNaNToF32UI( struct commonNaN a ) - { return (uint_fast32_t) a.sign<<31 | 0x7FFFFFFF; } -#else -uint_fast32_t softfloat_commonNaNToF32UI( struct commonNaN ); -#endif - -/*---------------------------------------------------------------------------- -| Takes two single-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ -uint_fast32_t softfloat_propagateNaNF32UI( uint_fast32_t, uint_fast32_t ); - -/*---------------------------------------------------------------------------- -| The pattern for a default generated double-precision NaN. -*----------------------------------------------------------------------------*/ -#define defaultNaNF64UI UINT64_C(0xFFF8000000000000) - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -#if defined INLINE_LEVEL && ( 1 <= INLINE_LEVEL ) -INLINE bool softfloat_isSigNaNF64UI( uint_fast64_t ui ) -{ - return - ( ( ui>>51 & 0xFFF ) == 0xFFE ) - && ( ui & UINT64_C( 0x0007FFFFFFFFFFFF ) ); -} -#else -bool softfloat_isSigNaNF64UI( uint_fast64_t ); -#endif - -/*---------------------------------------------------------------------------- -*----------------------------------------------------------------------------*/ -/*** MIGHT BE INLINE'D. ***/ -struct commonNaN softfloat_f64UIToCommonNaN( uint_fast64_t ); -uint_fast64_t softfloat_commonNaNToF64UI( struct commonNaN ); - -/*---------------------------------------------------------------------------- -| Takes two double-precision floating-point values `a' and `b', one of which -| is a NaN, and returns the appropriate NaN result. If either `a' or `b' is a -| signaling NaN, the invalid exception is raised. -*----------------------------------------------------------------------------*/ -uint_fast64_t softfloat_propagateNaNF64UI( uint_fast64_t, uint_fast64_t ); - -- 2.30.2