-from nmigen import Module, Signal
+from nmigen import Module, Signal, Mux
+from nmigen.hdl.rec import Record
from nmigen.compat.sim import run_simulation
-from example_buf_pipe import ExampleBufPipe
+from nmigen.cli import verilog, rtlil
+
+from example_buf_pipe import ExampleBufPipe, ExampleBufPipeAdd
+from example_buf_pipe import ExampleCombPipe, CombPipe, ExampleStageCls
+from example_buf_pipe import PrevControl, NextControl, BufferedPipeline
+from example_buf_pipe import StageChain
+
from random import randint
def check_o_n_valid(dut, val):
- o_n_valid = yield dut.o.n_valid
- assert o_n_valid == val
-
-def check_o_n_valid2(dut, val):
- o_n_valid = yield dut.o_n_valid
+ o_n_valid = yield dut.n.o_valid
assert o_n_valid == val
def testbench(dut):
#yield dut.i_p_rst.eq(1)
- yield dut.i.n_ready.eq(0)
- yield dut.o.p_ready.eq(0)
+ yield dut.n.i_ready.eq(0)
+ yield dut.p.o_ready.eq(0)
yield
yield
#yield dut.i_p_rst.eq(0)
- yield dut.i.n_ready.eq(1)
- yield dut.stage.i_data.eq(5)
- yield dut.i.p_valid.eq(1)
+ yield dut.n.i_ready.eq(1)
+ yield dut.p.i_data.eq(5)
+ yield dut.p.i_valid.eq(1)
yield
- yield dut.stage.i_data.eq(7)
+ yield dut.p.i_data.eq(7)
yield from check_o_n_valid(dut, 0) # effects of i_p_valid delayed
yield
yield from check_o_n_valid(dut, 1) # ok *now* i_p_valid effect is felt
- yield dut.stage.i_data.eq(2)
+ yield dut.p.i_data.eq(2)
yield
- yield dut.i.n_ready.eq(0) # begin going into "stall" (next stage says ready)
- yield dut.stage.i_data.eq(9)
+ yield dut.n.i_ready.eq(0) # begin going into "stall" (next stage says ready)
+ yield dut.p.i_data.eq(9)
yield
- yield dut.i.p_valid.eq(0)
- yield dut.stage.i_data.eq(12)
+ yield dut.p.i_valid.eq(0)
+ yield dut.p.i_data.eq(12)
yield
- yield dut.stage.i_data.eq(32)
- yield dut.i.n_ready.eq(1)
+ yield dut.p.i_data.eq(32)
+ yield dut.n.i_ready.eq(1)
yield
yield from check_o_n_valid(dut, 1) # buffer still needs to output
yield
def testbench2(dut):
- #yield dut.i.p_rst.eq(1)
- yield dut.i_n_ready.eq(0)
- #yield dut.o.p_ready.eq(0)
+ #yield dut.p.i_rst.eq(1)
+ yield dut.n.i_ready.eq(0)
+ #yield dut.p.o_ready.eq(0)
yield
yield
- #yield dut.i.p_rst.eq(0)
- yield dut.i_n_ready.eq(1)
- yield dut.i_data.eq(5)
- yield dut.i_p_valid.eq(1)
+ #yield dut.p.i_rst.eq(0)
+ yield dut.n.i_ready.eq(1)
+ yield dut.p.i_data.eq(5)
+ yield dut.p.i_valid.eq(1)
yield
- yield dut.i_data.eq(7)
- yield from check_o_n_valid2(dut, 0) # effects of i_p_valid delayed 2 clocks
+ yield dut.p.i_data.eq(7)
+ yield from check_o_n_valid(dut, 0) # effects of i_p_valid delayed 2 clocks
yield
- yield from check_o_n_valid2(dut, 0) # effects of i_p_valid delayed 2 clocks
+ yield from check_o_n_valid(dut, 0) # effects of i_p_valid delayed 2 clocks
- yield dut.i_data.eq(2)
+ yield dut.p.i_data.eq(2)
yield
- yield from check_o_n_valid2(dut, 1) # ok *now* i_p_valid effect is felt
- yield dut.i_n_ready.eq(0) # begin going into "stall" (next stage says ready)
- yield dut.i_data.eq(9)
+ yield from check_o_n_valid(dut, 1) # ok *now* i_p_valid effect is felt
+ yield dut.n.i_ready.eq(0) # begin going into "stall" (next stage says ready)
+ yield dut.p.i_data.eq(9)
yield
- yield dut.i_p_valid.eq(0)
- yield dut.i_data.eq(12)
+ yield dut.p.i_valid.eq(0)
+ yield dut.p.i_data.eq(12)
yield
- yield dut.i_data.eq(32)
- yield dut.i_n_ready.eq(1)
+ yield dut.p.i_data.eq(32)
+ yield dut.n.i_ready.eq(1)
yield
- yield from check_o_n_valid2(dut, 1) # buffer still needs to output
+ yield from check_o_n_valid(dut, 1) # buffer still needs to output
yield
- yield from check_o_n_valid2(dut, 1) # buffer still needs to output
+ yield from check_o_n_valid(dut, 1) # buffer still needs to output
yield
- yield from check_o_n_valid2(dut, 1) # buffer still needs to output
+ yield from check_o_n_valid(dut, 1) # buffer still needs to output
yield
- yield from check_o_n_valid2(dut, 0) # buffer outputted, *now* we're done.
+ yield from check_o_n_valid(dut, 0) # buffer outputted, *now* we're done.
yield
yield
yield
class Test3:
- def __init__(self, dut):
+ def __init__(self, dut, resultfn):
self.dut = dut
+ self.resultfn = resultfn
self.data = []
- for i in range(10000):
+ for i in range(num_tests):
#data.append(randint(0, 1<<16-1))
self.data.append(i+1)
self.i = 0
send = True
else:
send = randint(0, send_range) != 0
- o_p_ready = yield self.dut.o.p_ready
+ o_p_ready = yield self.dut.p.o_ready
if not o_p_ready:
yield
continue
if send and self.i != len(self.data):
- yield self.dut.i.p_valid.eq(1)
- yield self.dut.stage.i_data.eq(self.data[self.i])
+ yield self.dut.p.i_valid.eq(1)
+ yield self.dut.p.i_data.eq(self.data[self.i])
self.i += 1
else:
- yield self.dut.i.p_valid.eq(0)
+ yield self.dut.p.i_valid.eq(0)
yield
def rcv(self):
stall_range = randint(0, 3)
for j in range(randint(1,10)):
stall = randint(0, stall_range) != 0
- yield self.dut.i.n_ready.eq(stall)
+ yield self.dut.n.i_ready.eq(stall)
yield
- o_n_valid = yield self.dut.o.n_valid
- i_n_ready = yield self.dut.i.n_ready
+ o_n_valid = yield self.dut.n.o_valid
+ i_n_ready = yield self.dut.n.i_ready
if not o_n_valid or not i_n_ready:
continue
- o_data = yield self.dut.stage.o_data
- assert o_data == self.data[self.o] + 1, \
- "%d-%d data %x not match %x\n" \
- % (self.i, self.o, o_data, self.data[self.o])
+ o_data = yield self.dut.n.o_data
+ self.resultfn(o_data, self.data[self.o], self.i, self.o)
self.o += 1
if self.o == len(self.data):
break
+def test3_resultfn(o_data, expected, i, o):
+ assert o_data == expected + 1, \
+ "%d-%d data %x not match %x\n" \
+ % (i, o, o_data, expected)
+
+def data_dict():
+ data = []
+ for i in range(num_tests):
+ data.append({'src1': randint(0, 1<<16-1),
+ 'src2': randint(0, 1<<16-1)})
+ return data
+
+
+class Test5:
+ def __init__(self, dut, resultfn, data=None):
+ self.dut = dut
+ self.resultfn = resultfn
+ if data:
+ self.data = data
+ else:
+ self.data = []
+ for i in range(num_tests):
+ self.data.append((randint(0, 1<<16-1), randint(0, 1<<16-1)))
+ self.i = 0
+ self.o = 0
+
+ def send(self):
+ while self.o != len(self.data):
+ send_range = randint(0, 3)
+ for j in range(randint(1,10)):
+ if send_range == 0:
+ send = True
+ else:
+ send = randint(0, send_range) != 0
+ o_p_ready = yield self.dut.p.o_ready
+ if not o_p_ready:
+ yield
+ continue
+ if send and self.i != len(self.data):
+ yield self.dut.p.i_valid.eq(1)
+ for v in self.dut.set_input(self.data[self.i]):
+ yield v
+ self.i += 1
+ else:
+ yield self.dut.p.i_valid.eq(0)
+ yield
+
+ def rcv(self):
+ while self.o != len(self.data):
+ stall_range = randint(0, 3)
+ for j in range(randint(1,10)):
+ stall = randint(0, stall_range) != 0
+ yield self.dut.n.i_ready.eq(stall)
+ yield
+ o_n_valid = yield self.dut.n.o_valid
+ i_n_ready = yield self.dut.n.i_ready
+ if not o_n_valid or not i_n_ready:
+ continue
+ if isinstance(self.dut.n.o_data, Record):
+ o_data = {}
+ dod = self.dut.n.o_data
+ for k, v in dod.fields.items():
+ o_data[k] = yield v
+ else:
+ o_data = yield self.dut.n.o_data
+ self.resultfn(o_data, self.data[self.o], self.i, self.o)
+ self.o += 1
+ if self.o == len(self.data):
+ break
+
+def test5_resultfn(o_data, expected, i, o):
+ res = expected[0] + expected[1]
+ assert o_data == res, \
+ "%d-%d data %x not match %s\n" \
+ % (i, o, o_data, repr(expected))
def testbench4(dut):
data = []
- for i in range(10000):
+ for i in range(num_tests):
#data.append(randint(0, 1<<16-1))
data.append(i+1)
i = 0
while True:
stall = randint(0, 3) != 0
send = randint(0, 5) != 0
- yield dut.i_n_ready.eq(stall)
- o_p_ready = yield dut.o_p_ready
+ yield dut.n.i_ready.eq(stall)
+ o_p_ready = yield dut.p.o_ready
if o_p_ready:
if send and i != len(data):
- yield dut.i_p_valid.eq(1)
- yield dut.i_data.eq(data[i])
+ yield dut.p.i_valid.eq(1)
+ yield dut.p.i_data.eq(data[i])
i += 1
else:
- yield dut.i_p_valid.eq(0)
+ yield dut.p.i_valid.eq(0)
yield
- o_n_valid = yield dut.o_n_valid
- i_n_ready = yield dut.i_n_ready
+ o_n_valid = yield dut.n.o_valid
+ i_n_ready = yield dut.n.i_ready
if o_n_valid and i_n_ready:
- o_data = yield dut.o_data
+ o_data = yield dut.n.o_data
assert o_data == data[o] + 2, "%d-%d data %x not match %x\n" \
% (i, o, o_data, data[o])
o += 1
"""
connect these: ------|---------------|
v v
- i_p_valid >>in pipe1 o_n_valid out>> i_p_valid >>in pipe2
+ i_p_valid >>in pipe1 o_n_valid out>> i_p_valid >>in pipe2
o_p_ready <<out pipe1 i_n_ready <<in o_p_ready <<out pipe2
- stage.i_data >>in pipe1 o_data out>> stage.i_data >>in pipe2
+ p_i_data >>in pipe1 p_i_data out>> n_o_data >>in pipe2
"""
def __init__(self):
self.pipe1 = ExampleBufPipe()
self.pipe2 = ExampleBufPipe()
# input
- self.i_p_valid = Signal() # >>in - comes in from PREVIOUS stage
- self.i_n_ready = Signal() # in<< - comes in from the NEXT stage
- self.i_data = Signal(32) # >>in - comes in from the PREVIOUS stage
+ self.p = PrevControl()
+ self.p.i_data = Signal(32) # >>in - comes in from the PREVIOUS stage
# output
- self.o_n_valid = Signal() # out>> - goes out to the NEXT stage
- self.o_p_ready = Signal() # <<out - goes out to the PREVIOUS stage
- self.o_data = Signal(32) # out>> - goes out to the NEXT stage
+ self.n = NextControl()
+ self.n.o_data = Signal(32) # out>> - goes out to the NEXT stage
def elaborate(self, platform):
m = Module()
m.submodules.pipe2 = self.pipe2
# connect inter-pipe input/output valid/ready/data
- m.d.comb += self.pipe2.i.p_valid.eq(self.pipe1.o.n_valid)
- m.d.comb += self.pipe1.i.n_ready.eq(self.pipe2.o.p_ready)
- m.d.comb += self.pipe2.stage.i_data.eq(self.pipe1.stage.o_data)
+ m.d.comb += self.pipe1.connect_to_next(self.pipe2)
# inputs/outputs to the module: pipe1 connections here (LHS)
- m.d.comb += self.pipe1.i.p_valid.eq(self.i_p_valid)
- m.d.comb += self.o_p_ready.eq(self.pipe1.o.p_ready)
- m.d.comb += self.pipe1.stage.i_data.eq(self.i_data)
+ m.d.comb += self.pipe1.connect_in(self)
# now pipe2 connections (RHS)
- m.d.comb += self.o_n_valid.eq(self.pipe2.o.n_valid)
- m.d.comb += self.pipe2.i.n_ready.eq(self.i_n_ready)
- m.d.comb += self.o_data.eq(self.pipe2.stage.o_data)
+ m.d.comb += self.pipe2.connect_out(self)
+
+ return m
+
+
+class ExampleBufPipeChain2(BufferedPipeline):
+ """ connects two stages together as a *single* combinatorial stage.
+ """
+ def __init__(self):
+ stage1 = ExampleStageCls()
+ stage2 = ExampleStageCls()
+ combined = StageChain([stage1, stage2])
+ BufferedPipeline.__init__(self, combined)
+
+
+def data_chain2():
+ data = []
+ for i in range(num_tests):
+ data.append(randint(0, 1<<16-2))
+ return data
+
+def test9_resultfn(o_data, expected, i, o):
+ res = expected + 2
+ assert o_data == res, \
+ "%d-%d data %x not match %s\n" \
+ % (i, o, o_data, repr(expected))
+
+
+class SetLessThan:
+ def __init__(self, width, signed):
+ self.src1 = Signal((width, signed))
+ self.src2 = Signal((width, signed))
+ self.output = Signal(width)
+
+ def elaborate(self, platform):
+ m = Module()
+ m.d.comb += self.output.eq(Mux(self.src1 < self.src2, 1, 0))
return m
+
+class LTStage:
+ def __init__(self):
+ self.slt = SetLessThan(16, True)
+
+ def ispec(self):
+ return (Signal(16), Signal(16))
+
+ def ospec(self):
+ return Signal(16)
+
+ def setup(self, m, i):
+ self.o = Signal(16)
+ m.submodules.slt = self.slt
+ m.d.comb += self.slt.src1.eq(i[0])
+ m.d.comb += self.slt.src2.eq(i[1])
+ m.d.comb += self.o.eq(self.slt.output)
+
+ def process(self, i):
+ return self.o
+
+
+class ExampleLTCombPipe(CombPipe):
+ """ an example of how to use the combinatorial pipeline.
+ """
+
+ def __init__(self):
+ stage = LTStage()
+ CombPipe.__init__(self, stage)
+
+
+def test6_resultfn(o_data, expected, i, o):
+ res = 1 if expected[0] < expected[1] else 0
+ assert o_data == res, \
+ "%d-%d data %x not match %s\n" \
+ % (i, o, o_data, repr(expected))
+
+
+class ExampleAddRecordStage:
+ """ example use of a Record
+ """
+
+ record_spec = [('src1', 16), ('src2', 16)]
+ def ispec(self):
+ """ returns a tuple of input signals which will be the incoming data
+ """
+ return Record(self.record_spec)
+
+ def ospec(self):
+ return Record(self.record_spec)
+
+ def process(self, i):
+ """ process the input data (sums the values in the tuple) and returns it
+ """
+ return {'src1': i.src1 + 1,
+ 'src2': i.src2 + 1}
+
+
+class ExampleAddRecordPipe(CombPipe):
+ """ an example of how to use the combinatorial pipeline.
+ """
+
+ def __init__(self):
+ stage = ExampleAddRecordStage()
+ CombPipe.__init__(self, stage)
+
+
+def test7_resultfn(o_data, expected, i, o):
+ res = (expected['src1'] + 1, expected['src2'] + 1)
+ assert o_data['src1'] == res[0] and o_data['src2'] == res[1], \
+ "%d-%d data %s not match %s\n" \
+ % (i, o, repr(o_data), repr(expected))
+
+
+class Example2OpClass:
+ """ an example of a class used to store 2 operands.
+ requires an eq function, to conform with the pipeline stage API
+ """
+
+ def __init__(self):
+ self.op1 = Signal(16)
+ self.op2 = Signal(16)
+
+ def eq(self, i):
+ return [self.op1.eq(i.op1), self.op2.eq(i.op2)]
+
+
+class ExampleAddClassStage:
+ """ an example of how to use the buffered pipeline, as a class instance
+ """
+
+ def ispec(self):
+ """ returns an instance of an Example2OpClass.
+ """
+ return Example2OpClass()
+
+ def ospec(self):
+ """ returns an output signal which will happen to contain the sum
+ of the two inputs
+ """
+ return Signal(16)
+
+ def process(self, i):
+ """ process the input data (sums the values in the tuple) and returns it
+ """
+ return i.op1 + i.op2
+
+
+class ExampleBufPipeAddClass(BufferedPipeline):
+ """ an example of how to use the buffered pipeline, using a class instance
+ """
+
+ def __init__(self):
+ addstage = ExampleAddClassStage()
+ BufferedPipeline.__init__(self, addstage)
+
+
+class TestInputAdd:
+ """ the eq function, called by set_input, needs an incoming object
+ that conforms to the Example2OpClass.eq function requirements
+ easiest way to do that is to create a class that has the exact
+ same member layout (self.op1, self.op2) as Example2OpClass
+ """
+ def __init__(self, op1, op2):
+ self.op1 = op1
+ self.op2 = op2
+
+
+def test8_resultfn(o_data, expected, i, o):
+ res = expected.op1 + expected.op2 # these are a TestInputAdd instance
+ assert o_data == res, \
+ "%d-%d data %x not match %s\n" \
+ % (i, o, o_data, repr(expected))
+
+def data_2op():
+ data = []
+ for i in range(num_tests):
+ data.append(TestInputAdd(randint(0, 1<<16-1), randint(0, 1<<16-1)))
+ return data
+
+
+num_tests = 100
+
if __name__ == '__main__':
print ("test 1")
dut = ExampleBufPipe()
print ("test 3")
dut = ExampleBufPipe()
- test = Test3(dut)
+ test = Test3(dut, test3_resultfn)
run_simulation(dut, [test.send, test.rcv], vcd_name="test_bufpipe3.vcd")
+ print ("test 3.5")
+ dut = ExampleCombPipe()
+ test = Test3(dut, test3_resultfn)
+ run_simulation(dut, [test.send, test.rcv], vcd_name="test_combpipe3.vcd")
+
print ("test 4")
dut = ExampleBufPipe2()
run_simulation(dut, testbench4(dut), vcd_name="test_bufpipe4.vcd")
+
+ print ("test 5")
+ dut = ExampleBufPipeAdd()
+ test = Test5(dut, test5_resultfn)
+ run_simulation(dut, [test.send, test.rcv], vcd_name="test_bufpipe5.vcd")
+
+ print ("test 6")
+ dut = ExampleLTCombPipe()
+ test = Test5(dut, test6_resultfn)
+ run_simulation(dut, [test.send, test.rcv], vcd_name="test_ltcomb6.vcd")
+
+ ports = [dut.p.i_valid, dut.n.i_ready,
+ dut.n.o_valid, dut.p.o_ready] + \
+ list(dut.p.i_data) + [dut.n.o_data]
+ vl = rtlil.convert(dut, ports=ports)
+ with open("test_ltcomb_pipe.il", "w") as f:
+ f.write(vl)
+
+ print ("test 7")
+ dut = ExampleAddRecordPipe()
+ data=data_dict()
+ test = Test5(dut, test7_resultfn, data=data)
+ run_simulation(dut, [test.send, test.rcv], vcd_name="test_addrecord.vcd")
+
+ ports = [dut.p.i_valid, dut.n.i_ready,
+ dut.n.o_valid, dut.p.o_ready,
+ dut.p.i_data.src1, dut.p.i_data.src2,
+ dut.n.o_data.src1, dut.n.o_data.src2]
+ vl = rtlil.convert(dut, ports=ports)
+ with open("test_recordcomb_pipe.il", "w") as f:
+ f.write(vl)
+
+ print ("test 8")
+ dut = ExampleBufPipeAddClass()
+ data=data_2op()
+ test = Test5(dut, test8_resultfn, data=data)
+ run_simulation(dut, [test.send, test.rcv], vcd_name="test_bufpipe8.vcd")
+
+ print ("test 9")
+ dut = ExampleBufPipeChain2()
+ ports = [dut.p.i_valid, dut.n.i_ready,
+ dut.n.o_valid, dut.p.o_ready] + \
+ [dut.p.i_data] + [dut.n.o_data]
+ vl = rtlil.convert(dut, ports=ports)
+ with open("test_bufpipechain2.il", "w") as f:
+ f.write(vl)
+
+ data = data_chain2()
+ test = Test5(dut, test9_resultfn, data=data)
+ run_simulation(dut, [test.send, test.rcv],
+ vcd_name="test_bufpipechain2.vcd")
+
projects / ieee754fpu.git / blobdiff