# PartitionedSignal nmigen-aware eq (assign)

* <https://bugs.libre-soc.org/show_bug.cgi?id=709>

For copying (assigning) PartitionedSignal to PartitionedSignal
of equal size there is no issue.  However if the source has a
greater width than the target, *partition-aware* truncation
must occur.  For the opposite, sign/zero extension must occur.
Finally for a Signal or Const, duplication across all Partitions
must occur, again, following the rules of zero, sign or unsigned.

Take two PartitionedSignals (source a, dest b) of 32 bit:

    partition:      p    p    p       (3 bits)
    a        :  AAA3 AAA2 AAA1 AAA0  (32 bits)
    b        :  BBB3 BBB2 BBB1 BBB0  (32 bits)

For all partition settings this copies verbatim.  Also,
when A is longer, a truncated version of A is always
copied verbatim, regardless of partition settings.
However if A
is shorter than B:

    partition:      p    p    p       (3 bits)
    a        :  A7A6 A5A4 A3A2 A1A0  (8 bits)
    b        :  BBB3 BBB2 BBB1 BBB0  (16 bits)

then it matters what the partition settings are:

| partition | o3         | o2         | o1         | o0         |
| --------- | --         | --         | --         | --         |
| 000       | [A7A7A7A7] | [A7A7A7A7] | A7A6A5A4   | A3A2A1A0   |
| 001       | [A7A7A7A7] | [A7A7]A7A6 | A5A4A3A2   | [A1A1]A1A0 |
| 010       | [A7A7A7A7] | A7A6A5A4   | [A3A3A3A3] | A3A2A1A0   |
| 011       | [A7A7A7A7] | A7A6A5A4   | [A3A3]A3A2 | [A1A1]A1A0 |
| 100       | [A7A7]A7A6 | [A5A5A5A5] | [A5A5]A5A4 | A3A2A1A0   |
| 101       | [A7A7]A7A6 | [A5A5A5A5] | A5A4A3A2   | [A1A1]A1A0 |
| 110       | [A7A7]A7A6 | [A5A5]A5A4 | [A3A3A3A3] | A3A2A1A0   |
| 111       | [A7A7]A7A6 | [A5A5]A5A4 | [A3A3]A3A2 | [A1A1]A1A0 |

where square brackets are zero if A is unsigned, and contains
the specified bits if signed.  Here, each partition copies the
smaller value (A) into the larger partition (B) then, depending
on whether A is signed or unsigned, sign-extends or zero-extends
*on a per-partition basis*.

When the source A is scalar and is equal or larger than
the destination it requires copying across multiple
partitions:

    partition:      p    p    p       (3 bits)
    a        :  AAAA AAAA AAAA AAAA  (16 bits)
    b        :  B7B6 B5B4 B3B2 B1B0  (8 bits)

The partition options are:

| partition | o3   | o2   | o1   | o0     |
| --------- | --   | --   | --   | --     |
| 000       | A7A6 | A5A4 | A3A2 | A1A0   |
| 001       | A5A4 | A3A2 | A1A0 | A1A0   |
| 010       | A3A2 | A1A0 | A3A2 | A1A0   |
| 100       | A1A0 | A5A4 | A3A2 | A1A0   |
| 111       | A1A0 | A1A0 | A1A0 | A1A0   |