Shape is 32-bits When SHAPE is set entirely to zeros, remapping is
disabled: the register's elements are a linear (1D) vector.

| 31..30   | 29..24 | 23..21  | 20..18  | 17..12  | 11..6   | 5..0    |
| -------- | ------ | ------- | ------- | ------- | -------- | ------- |
| applydim |modulo | invxyz | permute | zdimsz  | ydimsz  | xdimsz  |

applydim will set to zero the dimensions less than this. applydim=0 applies all three. applydim=1 applies y and z. applydim=2 applys only z. applydim=3 is reserved.

invxyz will invert the start index of each of x, y or z. If invxyz[0] is zero then x-dimensional counting begins from 0 and increments, otherwise it begins from xdimsz-1 and iterates down to zero. Likewise for y and z.

modulo will cause the output to wrap and remain within the range 0 to modulo. The value zero disables modulus application. Note that modulo arithmetic is applied after all other remapping calculations.

xdimsz, ydimsz and zdimsz are offset by 1, such that a value of 0 indicates
that the array dimensionality for that dimension is 1.  A value of xdimsz=2
would indicate that in the first dimension there are 3 elements in the
array.  The format of the array is therefore as follows:

    array[xdim+1][ydim+1][zdim+1]

However whilst illustrative of the dimensionality, that does not take the
"permute" setting into account.  "permute" may be any one of six values
(0-5, with values of 6 and 7 being reserved, and not legal).  The table
below shows how the permutation dimensionality order works:

| permute | order | array format             |
| ------- | ----- | ------------------------ |
| 000     | 0,1,2 | (xdim+1)(ydim+1)(zdim+1) |
| 001     | 0,2,1 | (xdim+1)(zdim+1)(ydim+1) |
| 010     | 1,0,2 | (ydim+1)(xdim+1)(zdim+1) |
| 011     | 1,2,0 | (ydim+1)(zdim+1)(xdim+1) |
| 100     | 2,0,1 | (zdim+1)(xdim+1)(ydim+1) |
| 101     | 2,1,0 | (zdim+1)(ydim+1)(xdim+1) |

In other words, the "permute" option changes the order in which
nested for-loops over the array would be done.