use work.insn_helpers.all;
entity decode2 is
- generic (
- EX1_BYPASS : boolean := true
+ generic (
+ EX1_BYPASS : boolean := true;
+ HAS_FPU : boolean := true;
+ -- Non-zero to enable log data collection
+ LOG_LENGTH : natural := 0
);
- port (
- clk : in std_ulogic;
- rst : in std_ulogic;
+ port (
+ clk : in std_ulogic;
+ rst : in std_ulogic;
- complete_in : in std_ulogic;
- stall_in : in std_ulogic;
- stall_out : out std_ulogic;
+ complete_in : in instr_tag_t;
+ busy_in : in std_ulogic;
+ stall_out : out std_ulogic;
- stopped_out : out std_ulogic;
+ stopped_out : out std_ulogic;
- flush_in: in std_ulogic;
+ flush_in: in std_ulogic;
- d_in : in Decode1ToDecode2Type;
+ d_in : in Decode1ToDecode2Type;
- e_out : out Decode2ToExecute1Type;
+ e_out : out Decode2ToExecute1Type;
- r_in : in RegisterFileToDecode2Type;
- r_out : out Decode2ToRegisterFileType;
+ r_in : in RegisterFileToDecode2Type;
+ r_out : out Decode2ToRegisterFileType;
- c_in : in CrFileToDecode2Type;
- c_out : out Decode2ToCrFileType
+ c_in : in CrFileToDecode2Type;
+ c_out : out Decode2ToCrFileType;
+
+ execute_bypass : in bypass_data_t;
+ execute_cr_bypass : in cr_bypass_data_t;
+
+ log_out : out std_ulogic_vector(9 downto 0)
);
end entity decode2;
architecture behaviour of decode2 is
- type reg_type is record
- e : Decode2ToExecute1Type;
- end record;
-
- signal r, rin : reg_type;
-
- type decode_input_reg_t is record
- reg_valid : std_ulogic;
- reg : gspr_index_t;
- data : std_ulogic_vector(63 downto 0);
- end record;
-
- type decode_output_reg_t is record
- reg_valid : std_ulogic;
- reg : gspr_index_t;
- end record;
-
- function decode_input_reg_a (t : input_reg_a_t; insn_in : std_ulogic_vector(31 downto 0);
- reg_data : std_ulogic_vector(63 downto 0);
- ispr : gspr_index_t) return decode_input_reg_t is
- begin
- if t = RA or (t = RA_OR_ZERO and insn_ra(insn_in) /= "00000") then
- assert is_fast_spr(ispr) = '0' report "Decode A says GPR but ISPR says SPR:" &
- to_hstring(ispr) severity failure;
- return ('1', gpr_to_gspr(insn_ra(insn_in)), reg_data);
- elsif t = SPR then
- -- ISPR must be either a valid fast SPR number or all 0 for a slow SPR.
- -- If it's all 0, we don't treat it as a dependency as slow SPRs
- -- operations are single issue.
- --
- assert is_fast_spr(ispr) = '1' or ispr = "000000"
- report "Decode A says SPR but ISPR is invalid:" &
- to_hstring(ispr) severity failure;
- return (is_fast_spr(ispr), ispr, reg_data);
- else
- return ('0', (others => '0'), (others => '0'));
- end if;
- end;
-
- function decode_input_reg_b (t : input_reg_b_t; insn_in : std_ulogic_vector(31 downto 0);
- reg_data : std_ulogic_vector(63 downto 0);
- ispr : gspr_index_t) return decode_input_reg_t is
- variable ret : decode_input_reg_t;
- begin
- case t is
- when RB =>
- assert is_fast_spr(ispr) = '0' report "Decode B says GPR but ISPR says SPR:" &
- to_hstring(ispr) severity failure;
- ret := ('1', gpr_to_gspr(insn_rb(insn_in)), reg_data);
- when CONST_UI =>
- ret := ('0', (others => '0'), std_ulogic_vector(resize(unsigned(insn_ui(insn_in)), 64)));
- when CONST_SI =>
- ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_si(insn_in)), 64)));
- when CONST_SI_HI =>
- ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_si(insn_in)) & x"0000", 64)));
- when CONST_UI_HI =>
- ret := ('0', (others => '0'), std_ulogic_vector(resize(unsigned(insn_si(insn_in)) & x"0000", 64)));
- when CONST_LI =>
- ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_li(insn_in)) & "00", 64)));
- when CONST_BD =>
- ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_bd(insn_in)) & "00", 64)));
- when CONST_DS =>
- ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_ds(insn_in)) & "00", 64)));
- when CONST_M1 =>
- ret := ('0', (others => '0'), x"FFFFFFFFFFFFFFFF");
- when CONST_SH =>
- ret := ('0', (others => '0'), x"00000000000000" & "00" & insn_in(1) & insn_in(15 downto 11));
- when CONST_SH32 =>
- ret := ('0', (others => '0'), x"00000000000000" & "000" & insn_in(15 downto 11));
- when SPR =>
- -- ISPR must be either a valid fast SPR number or all 0 for a slow SPR.
- -- If it's all 0, we don't treat it as a dependency as slow SPRs
- -- operations are single issue.
- assert is_fast_spr(ispr) = '1' or ispr = "000000"
- report "Decode B says SPR but ISPR is invalid:" &
- to_hstring(ispr) severity failure;
- ret := (is_fast_spr(ispr), ispr, reg_data);
- when NONE =>
- ret := ('0', (others => '0'), (others => '0'));
- end case;
-
- return ret;
- end;
-
- function decode_input_reg_c (t : input_reg_c_t; insn_in : std_ulogic_vector(31 downto 0);
- reg_data : std_ulogic_vector(63 downto 0)) return decode_input_reg_t is
- begin
- case t is
- when RS =>
- return ('1', gpr_to_gspr(insn_rs(insn_in)), reg_data);
- when NONE =>
- return ('0', (others => '0'), (others => '0'));
- end case;
- end;
-
- function decode_output_reg (t : output_reg_a_t; insn_in : std_ulogic_vector(31 downto 0);
- ispr : gspr_index_t) return decode_output_reg_t is
- begin
- case t is
- when RT =>
- return ('1', gpr_to_gspr(insn_rt(insn_in)));
- when RA =>
- return ('1', gpr_to_gspr(insn_ra(insn_in)));
- when SPR =>
- -- ISPR must be either a valid fast SPR number or all 0 for a slow SPR.
- -- If it's all 0, we don't treat it as a dependency as slow SPRs
- -- operations are single issue.
- assert is_fast_spr(ispr) = '1' or ispr = "000000"
- report "Decode B says SPR but ISPR is invalid:" &
- to_hstring(ispr) severity failure;
- return (is_fast_spr(ispr), ispr);
- when NONE =>
- return ('0', "000000");
- end case;
- end;
-
- function decode_rc (t : rc_t; insn_in : std_ulogic_vector(31 downto 0)) return std_ulogic is
- begin
- case t is
- when RC =>
- return insn_rc(insn_in);
- when ONE =>
- return '1';
- when NONE =>
- return '0';
- end case;
- end;
-
- -- For now, use "rc" in the decode table to decide whether oe exists.
- -- This is not entirely correct architecturally: For mulhd and
- -- mulhdu, the OE field is reserved. It remains to be seen what an
- -- actual POWER9 does if we set it on those instructions, for now we
- -- test that further down when assigning to the multiplier oe input.
- --
- function decode_oe (t : rc_t; insn_in : std_ulogic_vector(31 downto 0)) return std_ulogic is
- begin
- case t is
- when RC =>
- return insn_oe(insn_in);
- when OTHERS =>
- return '0';
- end case;
- end;
-
- -- issue control signals
- signal control_valid_in : std_ulogic;
- signal control_valid_out : std_ulogic;
- signal control_sgl_pipe : std_logic;
-
- signal gpr_write_valid : std_ulogic;
- signal gpr_write : gspr_index_t;
- signal gpr_bypassable : std_ulogic;
-
- signal gpr_a_read_valid : std_ulogic;
- signal gpr_a_read :gspr_index_t;
- signal gpr_a_bypass : std_ulogic;
-
- signal gpr_b_read_valid : std_ulogic;
- signal gpr_b_read : gspr_index_t;
- signal gpr_b_bypass : std_ulogic;
-
- signal gpr_c_read_valid : std_ulogic;
- signal gpr_c_read : gpr_index_t;
- signal gpr_c_bypass : std_ulogic;
-
- signal cr_write_valid : std_ulogic;
-begin
- control_0: entity work.control
- generic map (
- PIPELINE_DEPTH => 1
- )
- port map (
- clk => clk,
- rst => rst,
+ type reg_type is record
+ e : Decode2ToExecute1Type;
+ repeat : std_ulogic;
+ end record;
+
+ signal r, rin : reg_type;
+
+ signal deferred : std_ulogic;
+
+ type decode_input_reg_t is record
+ reg_valid : std_ulogic;
+ reg : gspr_index_t;
+ data : std_ulogic_vector(63 downto 0);
+ end record;
+
+ type decode_output_reg_t is record
+ reg_valid : std_ulogic;
+ reg : gspr_index_t;
+ end record;
+
+ function decode_input_reg_a (t : input_reg_a_t; insn_in : std_ulogic_vector(31 downto 0);
+ reg_data : std_ulogic_vector(63 downto 0);
+ ispr : gspr_index_t;
+ instr_addr : std_ulogic_vector(63 downto 0))
+ return decode_input_reg_t is
+ begin
+ if t = RA or (t = RA_OR_ZERO and insn_ra(insn_in) /= "00000") then
+ return ('1', gpr_to_gspr(insn_ra(insn_in)), reg_data);
+ elsif t = SPR then
+ -- ISPR must be either a valid fast SPR number or all 0 for a slow SPR.
+ -- If it's all 0, we don't treat it as a dependency as slow SPRs
+ -- operations are single issue.
+ --
+ assert is_fast_spr(ispr) = '1' or ispr = "0000000"
+ report "Decode A says SPR but ISPR is invalid:" &
+ to_hstring(ispr) severity failure;
+ return (is_fast_spr(ispr), ispr, reg_data);
+ elsif t = CIA then
+ return ('0', (others => '0'), instr_addr);
+ elsif HAS_FPU and t = FRA then
+ return ('1', fpr_to_gspr(insn_fra(insn_in)), reg_data);
+ else
+ return ('0', (others => '0'), (others => '0'));
+ end if;
+ end;
+
+ function decode_input_reg_b (t : input_reg_b_t; insn_in : std_ulogic_vector(31 downto 0);
+ reg_data : std_ulogic_vector(63 downto 0);
+ ispr : gspr_index_t) return decode_input_reg_t is
+ variable ret : decode_input_reg_t;
+ begin
+ case t is
+ when RB =>
+ ret := ('1', gpr_to_gspr(insn_rb(insn_in)), reg_data);
+ when FRB =>
+ if HAS_FPU then
+ ret := ('1', fpr_to_gspr(insn_frb(insn_in)), reg_data);
+ else
+ ret := ('0', (others => '0'), (others => '0'));
+ end if;
+ when CONST_UI =>
+ ret := ('0', (others => '0'), std_ulogic_vector(resize(unsigned(insn_ui(insn_in)), 64)));
+ when CONST_SI =>
+ ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_si(insn_in)), 64)));
+ when CONST_SI_HI =>
+ ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_si(insn_in)) & x"0000", 64)));
+ when CONST_UI_HI =>
+ ret := ('0', (others => '0'), std_ulogic_vector(resize(unsigned(insn_si(insn_in)) & x"0000", 64)));
+ when CONST_LI =>
+ ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_li(insn_in)) & "00", 64)));
+ when CONST_BD =>
+ ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_bd(insn_in)) & "00", 64)));
+ when CONST_DS =>
+ ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_ds(insn_in)) & "00", 64)));
+ when CONST_DQ =>
+ ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_dq(insn_in)) & "0000", 64)));
+ when CONST_DXHI4 =>
+ ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_dx(insn_in)) & x"0004", 64)));
+ when CONST_M1 =>
+ ret := ('0', (others => '0'), x"FFFFFFFFFFFFFFFF");
+ when CONST_SH =>
+ ret := ('0', (others => '0'), x"00000000000000" & "00" & insn_in(1) & insn_in(15 downto 11));
+ when CONST_SH32 =>
+ ret := ('0', (others => '0'), x"00000000000000" & "000" & insn_in(15 downto 11));
+ when SPR =>
+ -- ISPR must be either a valid fast SPR number or all 0 for a slow SPR.
+ -- If it's all 0, we don't treat it as a dependency as slow SPRs
+ -- operations are single issue.
+ assert is_fast_spr(ispr) = '1' or ispr = "0000000"
+ report "Decode B says SPR but ISPR is invalid:" &
+ to_hstring(ispr) severity failure;
+ ret := (is_fast_spr(ispr), ispr, reg_data);
+ when NONE =>
+ ret := ('0', (others => '0'), (others => '0'));
+ end case;
+
+ return ret;
+ end;
+
+ function decode_input_reg_c (t : input_reg_c_t; insn_in : std_ulogic_vector(31 downto 0);
+ reg_data : std_ulogic_vector(63 downto 0)) return decode_input_reg_t is
+ begin
+ case t is
+ when RS =>
+ return ('1', gpr_to_gspr(insn_rs(insn_in)), reg_data);
+ when RCR =>
+ return ('1', gpr_to_gspr(insn_rcreg(insn_in)), reg_data);
+ when FRS =>
+ if HAS_FPU then
+ return ('1', fpr_to_gspr(insn_frt(insn_in)), reg_data);
+ else
+ return ('0', (others => '0'), (others => '0'));
+ end if;
+ when FRC =>
+ if HAS_FPU then
+ return ('1', fpr_to_gspr(insn_frc(insn_in)), reg_data);
+ else
+ return ('0', (others => '0'), (others => '0'));
+ end if;
+ when NONE =>
+ return ('0', (others => '0'), (others => '0'));
+ end case;
+ end;
+
+ function decode_output_reg (t : output_reg_a_t; insn_in : std_ulogic_vector(31 downto 0);
+ ispr : gspr_index_t) return decode_output_reg_t is
+ begin
+ case t is
+ when RT =>
+ return ('1', gpr_to_gspr(insn_rt(insn_in)));
+ when RA =>
+ return ('1', gpr_to_gspr(insn_ra(insn_in)));
+ when FRT =>
+ if HAS_FPU then
+ return ('1', fpr_to_gspr(insn_frt(insn_in)));
+ else
+ return ('0', "0000000");
+ end if;
+ when SPR =>
+ -- ISPR must be either a valid fast SPR number or all 0 for a slow SPR.
+ -- If it's all 0, we don't treat it as a dependency as slow SPRs
+ -- operations are single issue.
+ assert is_fast_spr(ispr) = '1' or ispr = "0000000"
+ report "Decode B says SPR but ISPR is invalid:" &
+ to_hstring(ispr) severity failure;
+ return (is_fast_spr(ispr), ispr);
+ when NONE =>
+ return ('0', "0000000");
+ end case;
+ end;
+
+ function decode_rc (t : rc_t; insn_in : std_ulogic_vector(31 downto 0)) return std_ulogic is
+ begin
+ case t is
+ when RC =>
+ return insn_rc(insn_in);
+ when ONE =>
+ return '1';
+ when NONE =>
+ return '0';
+ end case;
+ end;
+
+ -- control signals that are derived from insn_type
+ type mux_select_array_t is array(insn_type_t) of std_ulogic_vector(2 downto 0);
+
+ constant result_select : mux_select_array_t := (
+ OP_AND => "001", -- logical_result
+ OP_OR => "001",
+ OP_XOR => "001",
+ OP_POPCNT => "001",
+ OP_PRTY => "001",
+ OP_CMPB => "001",
+ OP_EXTS => "001",
+ OP_BPERM => "001",
+ OP_BCD => "001",
+ OP_MTSPR => "001",
+ OP_RLC => "010", -- rotator_result
+ OP_RLCL => "010",
+ OP_RLCR => "010",
+ OP_SHL => "010",
+ OP_SHR => "010",
+ OP_EXTSWSLI => "010",
+ OP_MUL_L64 => "011", -- muldiv_result
+ OP_MUL_H64 => "011",
+ OP_MUL_H32 => "011",
+ OP_DIV => "011",
+ OP_DIVE => "011",
+ OP_MOD => "011",
+ OP_CNTZ => "100", -- countzero_result
+ OP_MFSPR => "101", -- spr_result
+ OP_B => "110", -- next_nia
+ OP_BC => "110",
+ OP_BCREG => "110",
+ OP_ADDG6S => "111", -- misc_result
+ OP_ISEL => "111",
+ OP_DARN => "111",
+ OP_MFMSR => "111",
+ OP_MFCR => "111",
+ OP_SETB => "111",
+ others => "000" -- default to adder_result
+ );
- complete_in => complete_in,
- valid_in => control_valid_in,
- stall_in => stall_in,
- flush_in => flush_in,
- sgl_pipe_in => control_sgl_pipe,
- stop_mark_in => d_in.stop_mark,
+ constant subresult_select : mux_select_array_t := (
+ OP_MUL_L64 => "000", -- muldiv_result
+ OP_MUL_H64 => "001",
+ OP_MUL_H32 => "010",
+ OP_DIV => "011",
+ OP_DIVE => "011",
+ OP_MOD => "011",
+ OP_ADDG6S => "001", -- misc_result
+ OP_ISEL => "010",
+ OP_DARN => "011",
+ OP_MFMSR => "100",
+ OP_MFCR => "101",
+ OP_SETB => "110",
+ OP_CMP => "000", -- cr_result
+ OP_CMPRB => "001",
+ OP_CMPEQB => "010",
+ OP_CROP => "011",
+ OP_MCRXRX => "100",
+ OP_MTCRF => "101",
+ others => "000"
+ );
- gpr_write_valid_in => gpr_write_valid,
- gpr_write_in => gpr_write,
- gpr_bypassable => gpr_bypassable,
+ -- issue control signals
+ signal control_valid_in : std_ulogic;
+ signal control_valid_out : std_ulogic;
+ signal control_stall_out : std_ulogic;
+ signal control_sgl_pipe : std_logic;
- gpr_a_read_valid_in => gpr_a_read_valid,
- gpr_a_read_in => gpr_a_read,
+ signal gpr_write_valid : std_ulogic;
+ signal gpr_write : gspr_index_t;
- gpr_b_read_valid_in => gpr_b_read_valid,
- gpr_b_read_in => gpr_b_read,
+ signal gpr_a_read_valid : std_ulogic;
+ signal gpr_a_read : gspr_index_t;
+ signal gpr_a_bypass : std_ulogic;
- gpr_c_read_valid_in => gpr_c_read_valid,
- gpr_c_read_in => gpr_c_read,
+ signal gpr_b_read_valid : std_ulogic;
+ signal gpr_b_read : gspr_index_t;
+ signal gpr_b_bypass : std_ulogic;
- cr_read_in => d_in.decode.input_cr,
- cr_write_in => cr_write_valid,
+ signal gpr_c_read_valid : std_ulogic;
+ signal gpr_c_read : gspr_index_t;
+ signal gpr_c_bypass : std_ulogic;
- valid_out => control_valid_out,
- stall_out => stall_out,
- stopped_out => stopped_out,
+ signal cr_read_valid : std_ulogic;
+ signal cr_write_valid : std_ulogic;
+ signal cr_bypass : std_ulogic;
- gpr_bypass_a => gpr_a_bypass,
- gpr_bypass_b => gpr_b_bypass,
- gpr_bypass_c => gpr_c_bypass
- );
+ signal instr_tag : instr_tag_t;
- decode2_0: process(clk)
- begin
- if rising_edge(clk) then
- if rin.e.valid = '1' then
- report "execute " & to_hstring(rin.e.nia);
- end if;
- r <= rin;
- end if;
- end process;
-
- r_out.read1_reg <= gpr_or_spr_to_gspr(insn_ra(d_in.insn), d_in.ispr1);
- r_out.read2_reg <= gpr_or_spr_to_gspr(insn_rb(d_in.insn), d_in.ispr2);
- r_out.read3_reg <= insn_rs(d_in.insn);
-
- c_out.read <= d_in.decode.input_cr;
-
- decode2_1: process(all)
- variable v : reg_type;
- variable mul_a : std_ulogic_vector(63 downto 0);
- variable mul_b : std_ulogic_vector(63 downto 0);
- variable decoded_reg_a : decode_input_reg_t;
- variable decoded_reg_b : decode_input_reg_t;
- variable decoded_reg_c : decode_input_reg_t;
- variable decoded_reg_o : decode_output_reg_t;
- variable length : std_ulogic_vector(3 downto 0);
- begin
- v := r;
-
- v.e := Decode2ToExecute1Init;
-
- mul_a := (others => '0');
- mul_b := (others => '0');
-
- --v.e.input_cr := d_in.decode.input_cr;
- --v.e.output_cr := d_in.decode.output_cr;
-
- decoded_reg_a := decode_input_reg_a (d_in.decode.input_reg_a, d_in.insn, r_in.read1_data, d_in.ispr1);
- decoded_reg_b := decode_input_reg_b (d_in.decode.input_reg_b, d_in.insn, r_in.read2_data, d_in.ispr2);
- decoded_reg_c := decode_input_reg_c (d_in.decode.input_reg_c, d_in.insn, r_in.read3_data);
- decoded_reg_o := decode_output_reg (d_in.decode.output_reg_a, d_in.insn, d_in.ispr1);
-
- r_out.read1_enable <= decoded_reg_a.reg_valid;
- r_out.read2_enable <= decoded_reg_b.reg_valid;
- r_out.read3_enable <= decoded_reg_c.reg_valid;
-
- case d_in.decode.length is
- when is1B =>
- length := "0001";
- when is2B =>
- length := "0010";
- when is4B =>
- length := "0100";
- when is8B =>
- length := "1000";
- when NONE =>
- length := "0000";
- end case;
-
- -- execute unit
- v.e.nia := d_in.nia;
- v.e.insn_type := d_in.decode.insn_type;
- v.e.read_reg1 := decoded_reg_a.reg;
- v.e.read_data1 := decoded_reg_a.data;
- v.e.bypass_data1 := gpr_a_bypass;
- v.e.read_reg2 := decoded_reg_b.reg;
- v.e.read_data2 := decoded_reg_b.data;
- v.e.bypass_data2 := gpr_b_bypass;
- v.e.read_data3 := decoded_reg_c.data;
- v.e.bypass_data3 := gpr_c_bypass;
- v.e.write_reg := decoded_reg_o.reg;
- v.e.rc := decode_rc(d_in.decode.rc, d_in.insn);
- if not (d_in.decode.insn_type = OP_MUL_H32 or d_in.decode.insn_type = OP_MUL_H64) then
- v.e.oe := decode_oe(d_in.decode.rc, d_in.insn);
- end if;
- v.e.cr := c_in.read_cr_data;
- v.e.xerc := c_in.read_xerc_data;
- v.e.invert_a := d_in.decode.invert_a;
- v.e.invert_out := d_in.decode.invert_out;
- v.e.input_carry := d_in.decode.input_carry;
- v.e.output_carry := d_in.decode.output_carry;
- v.e.is_32bit := d_in.decode.is_32bit;
- v.e.is_signed := d_in.decode.is_signed;
- if d_in.decode.lr = '1' then
- v.e.lr := insn_lk(d_in.insn);
- end if;
- v.e.insn := d_in.insn;
- v.e.data_len := length;
- v.e.byte_reverse := d_in.decode.byte_reverse;
- v.e.sign_extend := d_in.decode.sign_extend;
- v.e.update := d_in.decode.update;
-
- -- issue control
- control_valid_in <= d_in.valid;
- control_sgl_pipe <= d_in.decode.sgl_pipe;
-
- gpr_write_valid <= decoded_reg_o.reg_valid;
- gpr_write <= decoded_reg_o.reg;
- gpr_bypassable <= '0';
- if EX1_BYPASS and d_in.decode.unit = ALU then
- gpr_bypassable <= '1';
- end if;
+begin
+ control_0: entity work.control
+ generic map (
+ EX1_BYPASS => EX1_BYPASS
+ )
+ port map (
+ clk => clk,
+ rst => rst,
+
+ complete_in => complete_in,
+ valid_in => control_valid_in,
+ repeated => r.repeat,
+ busy_in => busy_in,
+ deferred => deferred,
+ flush_in => flush_in,
+ sgl_pipe_in => control_sgl_pipe,
+ stop_mark_in => d_in.stop_mark,
+
+ gpr_write_valid_in => gpr_write_valid,
+ gpr_write_in => gpr_write,
+
+ gpr_a_read_valid_in => gpr_a_read_valid,
+ gpr_a_read_in => gpr_a_read,
- gpr_a_read_valid <= decoded_reg_a.reg_valid;
- gpr_a_read <= decoded_reg_a.reg;
+ gpr_b_read_valid_in => gpr_b_read_valid,
+ gpr_b_read_in => gpr_b_read,
- gpr_b_read_valid <= decoded_reg_b.reg_valid;
- gpr_b_read <= decoded_reg_b.reg;
+ gpr_c_read_valid_in => gpr_c_read_valid,
+ gpr_c_read_in => gpr_c_read,
- gpr_c_read_valid <= decoded_reg_c.reg_valid;
- gpr_c_read <= gspr_to_gpr(decoded_reg_c.reg);
+ execute_next_tag => execute_bypass.tag,
+ execute_next_cr_tag => execute_cr_bypass.tag,
- cr_write_valid <= d_in.decode.output_cr or decode_rc(d_in.decode.rc, d_in.insn);
+ cr_read_in => cr_read_valid,
+ cr_write_in => cr_write_valid,
+ cr_bypass => cr_bypass,
- v.e.valid := control_valid_out;
- if d_in.decode.unit = NONE then
- v.e.insn_type := OP_ILLEGAL;
- end if;
+ valid_out => control_valid_out,
+ stall_out => control_stall_out,
+ stopped_out => stopped_out,
- if rst = '1' then
- v.e := Decode2ToExecute1Init;
- end if;
+ gpr_bypass_a => gpr_a_bypass,
+ gpr_bypass_b => gpr_b_bypass,
+ gpr_bypass_c => gpr_c_bypass,
- -- Update registers
- rin <= v;
+ instr_tag_out => instr_tag
+ );
+
+ deferred <= r.e.valid and busy_in;
+
+ decode2_0: process(clk)
+ begin
+ if rising_edge(clk) then
+ if rst = '1' or flush_in = '1' or deferred = '0' then
+ if rin.e.valid = '1' then
+ report "execute " & to_hstring(rin.e.nia);
+ end if;
+ r <= rin;
+ end if;
+ end if;
+ end process;
+
+ c_out.read <= d_in.decode.input_cr;
+
+ decode2_1: process(all)
+ variable v : reg_type;
+ variable mul_a : std_ulogic_vector(63 downto 0);
+ variable mul_b : std_ulogic_vector(63 downto 0);
+ variable decoded_reg_a : decode_input_reg_t;
+ variable decoded_reg_b : decode_input_reg_t;
+ variable decoded_reg_c : decode_input_reg_t;
+ variable decoded_reg_o : decode_output_reg_t;
+ variable length : std_ulogic_vector(3 downto 0);
+ variable op : insn_type_t;
+ begin
+ v := r;
+
+ v.e := Decode2ToExecute1Init;
+
+ mul_a := (others => '0');
+ mul_b := (others => '0');
+
+ --v.e.input_cr := d_in.decode.input_cr;
+ v.e.output_cr := d_in.decode.output_cr;
+
+ -- Work out whether XER common bits are set
+ v.e.output_xer := d_in.decode.output_carry;
+ case d_in.decode.insn_type is
+ when OP_ADD | OP_MUL_L64 | OP_DIV | OP_DIVE =>
+ -- OE field is valid in OP_ADD/OP_MUL_L64 with major opcode 31 only
+ if d_in.insn(31 downto 26) = "011111" and insn_oe(d_in.insn) = '1' then
+ v.e.oe := '1';
+ v.e.output_xer := '1';
+ end if;
+ when OP_MTSPR =>
+ if decode_spr_num(d_in.insn) = SPR_XER then
+ v.e.output_xer := '1';
+ end if;
+ when others =>
+ end case;
+
+ decoded_reg_a := decode_input_reg_a (d_in.decode.input_reg_a, d_in.insn, r_in.read1_data, d_in.ispr1,
+ d_in.nia);
+ decoded_reg_b := decode_input_reg_b (d_in.decode.input_reg_b, d_in.insn, r_in.read2_data, d_in.ispr2);
+ decoded_reg_c := decode_input_reg_c (d_in.decode.input_reg_c, d_in.insn, r_in.read3_data);
+ decoded_reg_o := decode_output_reg (d_in.decode.output_reg_a, d_in.insn, d_in.ispro);
+
+ if d_in.decode.lr = '1' then
+ v.e.lr := insn_lk(d_in.insn);
+ -- b and bc have even major opcodes; bcreg is considered absolute
+ v.e.br_abs := insn_aa(d_in.insn) or d_in.insn(26);
+ end if;
+ op := d_in.decode.insn_type;
+
+ if d_in.decode.repeat /= NONE then
+ v.e.repeat := '1';
+ v.e.second := r.repeat;
+ case d_in.decode.repeat is
+ when DRSE =>
+ -- do RS|1,RS for LE; RS,RS|1 for BE
+ if r.repeat = d_in.big_endian then
+ decoded_reg_c.reg(0) := '1';
+ end if;
+ when DRTE =>
+ -- do RT|1,RT for LE; RT,RT|1 for BE
+ if r.repeat = d_in.big_endian then
+ decoded_reg_o.reg(0) := '1';
+ end if;
+ when DUPD =>
+ -- update-form loads, 2nd instruction writes RA
+ if r.repeat = '1' then
+ decoded_reg_o.reg := decoded_reg_a.reg;
+ end if;
+ when others =>
+ end case;
+ elsif v.e.lr = '1' and decoded_reg_a.reg_valid = '1' then
+ -- bcl/bclrl/bctarl that needs to write both CTR and LR has to be doubled
+ v.e.repeat := '1';
+ v.e.second := r.repeat;
+ -- first one does CTR, second does LR
+ decoded_reg_o.reg(0) := not r.repeat;
+ end if;
+
+ r_out.read1_enable <= decoded_reg_a.reg_valid and d_in.valid;
+ r_out.read1_reg <= decoded_reg_a.reg;
+ r_out.read2_enable <= decoded_reg_b.reg_valid and d_in.valid;
+ r_out.read2_reg <= decoded_reg_b.reg;
+ r_out.read3_enable <= decoded_reg_c.reg_valid and d_in.valid;
+ r_out.read3_reg <= decoded_reg_c.reg;
+
+ case d_in.decode.length is
+ when is1B =>
+ length := "0001";
+ when is2B =>
+ length := "0010";
+ when is4B =>
+ length := "0100";
+ when is8B =>
+ length := "1000";
+ when NONE =>
+ length := "0000";
+ end case;
+
+ -- execute unit
+ v.e.nia := d_in.nia;
+ v.e.unit := d_in.decode.unit;
+ v.e.fac := d_in.decode.facility;
+ v.e.instr_tag := instr_tag;
+ v.e.read_reg1 := decoded_reg_a.reg;
+ v.e.read_reg2 := decoded_reg_b.reg;
+ v.e.write_reg := decoded_reg_o.reg;
+ v.e.write_reg_enable := decoded_reg_o.reg_valid;
+ v.e.rc := decode_rc(d_in.decode.rc, d_in.insn);
+ v.e.xerc := c_in.read_xerc_data;
+ v.e.invert_a := d_in.decode.invert_a;
+ v.e.addm1 := '0';
+ v.e.insn_type := op;
+ v.e.invert_out := d_in.decode.invert_out;
+ v.e.input_carry := d_in.decode.input_carry;
+ v.e.output_carry := d_in.decode.output_carry;
+ v.e.is_32bit := d_in.decode.is_32bit;
+ v.e.is_signed := d_in.decode.is_signed;
+ v.e.insn := d_in.insn;
+ v.e.data_len := length;
+ v.e.byte_reverse := d_in.decode.byte_reverse;
+ v.e.sign_extend := d_in.decode.sign_extend;
+ v.e.update := d_in.decode.update;
+ v.e.reserve := d_in.decode.reserve;
+ v.e.br_pred := d_in.br_pred;
+ v.e.result_sel := result_select(op);
+ v.e.sub_select := subresult_select(op);
+ if op = OP_BC or op = OP_BCREG then
+ if d_in.insn(23) = '0' and r.repeat = '0' and
+ not (d_in.decode.insn_type = OP_BCREG and d_in.insn(10) = '0') then
+ -- decrement CTR if BO(2) = 0 and not bcctr
+ v.e.addm1 := '1';
+ v.e.result_sel := "000"; -- select adder output
+ end if;
+ end if;
+
+ -- See if any of the operands can get their value via the bypass path.
+ case gpr_a_bypass is
+ when '1' =>
+ v.e.read_data1 := execute_bypass.data;
+ when others =>
+ v.e.read_data1 := decoded_reg_a.data;
+ end case;
+ case gpr_b_bypass is
+ when '1' =>
+ v.e.read_data2 := execute_bypass.data;
+ when others =>
+ v.e.read_data2 := decoded_reg_b.data;
+ end case;
+ case gpr_c_bypass is
+ when '1' =>
+ v.e.read_data3 := execute_bypass.data;
+ when others =>
+ v.e.read_data3 := decoded_reg_c.data;
+ end case;
+
+ v.e.cr := c_in.read_cr_data;
+ if cr_bypass = '1' then
+ v.e.cr := execute_cr_bypass.data;
+ end if;
+
+ -- issue control
+ control_valid_in <= d_in.valid;
+ control_sgl_pipe <= d_in.decode.sgl_pipe;
+
+ gpr_write_valid <= v.e.write_reg_enable;
+ gpr_write <= decoded_reg_o.reg;
+
+ gpr_a_read_valid <= decoded_reg_a.reg_valid;
+ gpr_a_read <= decoded_reg_a.reg;
+
+ gpr_b_read_valid <= decoded_reg_b.reg_valid;
+ gpr_b_read <= decoded_reg_b.reg;
+
+ gpr_c_read_valid <= decoded_reg_c.reg_valid;
+ gpr_c_read <= decoded_reg_c.reg;
+
+ cr_write_valid <= d_in.decode.output_cr or decode_rc(d_in.decode.rc, d_in.insn);
+ -- Since ops that write CR only write some of the fields,
+ -- any op that writes CR effectively also reads it.
+ cr_read_valid <= cr_write_valid or d_in.decode.input_cr;
+
+ v.e.valid := control_valid_out;
+ if control_valid_out = '1' then
+ v.repeat := v.e.repeat and not r.repeat;
+ end if;
+
+ stall_out <= control_stall_out or v.repeat;
+
+ if rst = '1' or flush_in = '1' then
+ v.e := Decode2ToExecute1Init;
+ v.repeat := '0';
+ end if;
+
+ -- Update registers
+ rin <= v;
+
+ -- Update outputs
+ e_out <= r.e;
+ end process;
+
+ d2_log: if LOG_LENGTH > 0 generate
+ signal log_data : std_ulogic_vector(9 downto 0);
+ begin
+ dec2_log : process(clk)
+ begin
+ if rising_edge(clk) then
+ log_data <= r.e.nia(5 downto 2) &
+ r.e.valid &
+ stopped_out &
+ stall_out &
+ gpr_a_bypass &
+ gpr_b_bypass &
+ gpr_c_bypass;
+ end if;
+ end process;
+ log_out <= log_data;
+ end generate;
- -- Update outputs
- e_out <= r.e;
- end process;
end architecture behaviour;
projects / microwatt.git / blobdiff