rst : in std_ulogic;
-- asynchronous
- flush_out : out std_ulogic;
+ flush_in : in std_ulogic;
busy_out : out std_ulogic;
e_in : in Decode2ToExecute1Type;
fp_in : in FPUToExecute1Type;
ext_irq_in : std_ulogic;
+ interrupt_in : std_ulogic;
-- asynchronous
l_out : out Execute1ToLoadstore1Type;
- f_out : out Execute1ToFetch1Type;
fp_out : out Execute1ToFPUType;
e_out : out Execute1ToWritebackType;
+ bypass_data : out bypass_data_t;
+ bypass_cr_data : out cr_bypass_data_t;
dbg_msr_out : out std_ulogic_vector(63 downto 0);
fp_exception_next : std_ulogic;
trace_next : std_ulogic;
prev_op : insn_type_t;
- next_lr : std_ulogic_vector(63 downto 0);
br_taken : std_ulogic;
mul_in_progress : std_ulogic;
mul_finish : std_ulogic;
div_in_progress : std_ulogic;
cntz_in_progress : std_ulogic;
- last_nia : std_ulogic_vector(63 downto 0);
- redirect : std_ulogic;
- abs_br : std_ulogic;
- taken_br : std_ulogic;
- br_last : std_ulogic;
- do_intr : std_ulogic;
- vector : integer range 0 to 16#fff#;
- br_offset : std_ulogic_vector(63 downto 0);
- redir_mode : std_ulogic_vector(3 downto 0);
log_addr_spr : std_ulogic_vector(31 downto 0);
end record;
constant reg_type_init : reg_type :=
busy => '0', terminate => '0',
fp_exception_next => '0', trace_next => '0', prev_op => OP_ILLEGAL, br_taken => '0',
mul_in_progress => '0', mul_finish => '0', div_in_progress => '0', cntz_in_progress => '0',
- next_lr => (others => '0'), last_nia => (others => '0'),
- redirect => '0', abs_br => '0', taken_br => '0', br_last => '0', do_intr => '0', vector => 0,
- br_offset => (others => '0'), redir_mode => "0000",
others => (others => '0'));
signal r, rin : reg_type;
signal a_in, b_in, c_in : std_ulogic_vector(63 downto 0);
signal cr_in : std_ulogic_vector(31 downto 0);
+ signal xerc_in : xer_common_t;
signal valid_in : std_ulogic;
- signal ctrl: ctrl_t := (irq_state => WRITE_SRR0, others => (others => '0'));
- signal ctrl_tmp: ctrl_t := (irq_state => WRITE_SRR0, others => (others => '0'));
+ signal ctrl: ctrl_t := (others => (others => '0'));
+ signal ctrl_tmp: ctrl_t := (others => (others => '0'));
signal right_shift, rot_clear_left, rot_clear_right: std_ulogic;
signal rot_sign_ext: std_ulogic;
signal rotator_result: std_ulogic_vector(63 downto 0);
signal next_nia : std_ulogic_vector(63 downto 0);
signal current: Decode2ToExecute1Type;
+ signal carry_32 : std_ulogic;
+ signal carry_64 : std_ulogic;
+ signal overflow_32 : std_ulogic;
+ signal overflow_64 : std_ulogic;
+
+ signal trapval : std_ulogic_vector(4 downto 0);
+
+ signal write_cr_mask : std_ulogic_vector(7 downto 0);
+ signal write_cr_data : std_ulogic_vector(31 downto 0);
+
-- multiply signals
signal x_to_multiply: MultiplyInputType;
signal multiply_to_x: MultiplyOutputType;
begin
e.xerc.ca32 := carry32;
e.xerc.ca := carry;
- e.write_xerc_enable := '1';
end;
procedure set_ov(e: inout Execute1ToWritebackType;
if ov = '1' then
e.xerc.so := '1';
end if;
- e.write_xerc_enable := '1';
end;
function calc_ov(msb_a : std_ulogic; msb_b: std_ulogic;
dbg_msr_out <= ctrl.msr;
log_rd_addr <= r.log_addr_spr;
- a_in <= r.e.write_data when EX1_BYPASS and e_in.bypass_data1 = '1' else e_in.read_data1;
- b_in <= r.e.write_data when EX1_BYPASS and e_in.bypass_data2 = '1' else e_in.read_data2;
- c_in <= r.e.write_data when EX1_BYPASS and e_in.bypass_data3 = '1' else e_in.read_data3;
+ a_in <= e_in.read_data1;
+ b_in <= e_in.read_data2;
+ c_in <= e_in.read_data3;
+ cr_in <= e_in.cr;
+
+ -- XER forwarding. To avoid having to track XER hazards, we use
+ -- the previously latched value. Since the XER common bits
+ -- (SO, OV[32] and CA[32]) are only modified by instructions that are
+ -- handled here, we can just forward the result being sent to
+ -- writeback.
+ xerc_in <= r.e.xerc when r.e.write_xerc_enable = '1' or r.busy = '1' else e_in.xerc;
- busy_out <= l_in.busy or r.busy or fp_in.busy;
- valid_in <= e_in.valid and not busy_out;
+ with e_in.unit select busy_out <=
+ l_in.busy or r.busy or fp_in.busy when LDST,
+ l_in.busy or l_in.in_progress or r.busy or fp_in.busy when others;
+
+ valid_in <= e_in.valid and not busy_out and not flush_in;
terminate_out <= r.terminate;
ctrl.tb <= (others => '0');
ctrl.dec <= (others => '0');
ctrl.msr <= (MSR_SF => '1', MSR_LE => '1', others => '0');
- ctrl.irq_state <= WRITE_SRR0;
else
r <= rin;
ctrl <= ctrl_tmp;
if valid_in = '1' then
report "execute " & to_hstring(e_in.nia) & " op=" & insn_type_t'image(e_in.insn_type) &
- " wr=" & to_hstring(rin.e.write_reg);
+ " wr=" & to_hstring(rin.e.write_reg) & " we=" & std_ulogic'image(rin.e.write_enable) &
+ " tag=" & integer'image(rin.e.instr_tag.tag) & std_ulogic'image(rin.e.instr_tag.valid);
end if;
end if;
end if;
end process;
- execute1_1: process(all)
- variable v : reg_type;
+ -- Data path for integer instructions
+ execute1_dp: process(all)
variable a_inv : std_ulogic_vector(63 downto 0);
variable b_or_m1 : std_ulogic_vector(63 downto 0);
+ variable sum_with_carry : std_ulogic_vector(64 downto 0);
+ variable sign1, sign2 : std_ulogic;
+ variable abs1, abs2 : signed(63 downto 0);
+ variable addend : std_ulogic_vector(127 downto 0);
variable addg6s : std_ulogic_vector(63 downto 0);
+ variable crbit : integer range 0 to 31;
variable isel_result : std_ulogic_vector(63 downto 0);
variable darn : std_ulogic_vector(63 downto 0);
- variable mfcr_result : std_ulogic_vector(63 downto 0);
variable setb_result : std_ulogic_vector(63 downto 0);
- variable newcrf : std_ulogic_vector(3 downto 0);
- variable sum_with_carry : std_ulogic_vector(64 downto 0);
- variable crnum : crnum_t;
- variable crbit : integer range 0 to 31;
- variable scrnum : crnum_t;
+ variable mfcr_result : std_ulogic_vector(63 downto 0);
variable lo, hi : integer;
- variable sh, mb, me : std_ulogic_vector(5 downto 0);
- variable sh32, mb32, me32 : std_ulogic_vector(4 downto 0);
- variable bo, bi : std_ulogic_vector(4 downto 0);
- variable bf, bfa : std_ulogic_vector(2 downto 0);
- variable cr_op : std_ulogic_vector(9 downto 0);
- variable cr_operands : std_ulogic_vector(1 downto 0);
- variable bt, ba, bb : std_ulogic_vector(4 downto 0);
- variable btnum, banum, bbnum : integer range 0 to 31;
- variable crresult : std_ulogic;
variable l : std_ulogic;
- variable carry_32, carry_64 : std_ulogic;
- variable sign1, sign2 : std_ulogic;
- variable abs1, abs2 : signed(63 downto 0);
- variable overflow : std_ulogic;
variable zerohi, zerolo : std_ulogic;
variable msb_a, msb_b : std_ulogic;
variable a_lt : std_ulogic;
variable a_lt_lo : std_ulogic;
variable a_lt_hi : std_ulogic;
- variable lv : Execute1ToLoadstore1Type;
- variable irq_valid : std_ulogic;
- variable exception : std_ulogic;
- variable exception_nextpc : std_ulogic;
- variable trapval : std_ulogic_vector(4 downto 0);
- variable illegal : std_ulogic;
- variable is_branch : std_ulogic;
- variable is_direct_branch : std_ulogic;
- variable taken_branch : std_ulogic;
- variable abs_branch : std_ulogic;
- variable spr_val : std_ulogic_vector(63 downto 0);
- variable addend : std_ulogic_vector(127 downto 0);
- variable do_trace : std_ulogic;
- variable hold_wr_data : std_ulogic;
- variable f : Execute1ToFetch1Type;
- variable fv : Execute1ToFPUType;
+ variable newcrf : std_ulogic_vector(3 downto 0);
+ variable bf, bfa : std_ulogic_vector(2 downto 0);
+ variable crnum : crnum_t;
+ variable scrnum : crnum_t;
+ variable cr_operands : std_ulogic_vector(1 downto 0);
+ variable crresult : std_ulogic;
+ variable bt, ba, bb : std_ulogic_vector(4 downto 0);
+ variable btnum : integer range 0 to 3;
+ variable banum, bbnum : integer range 0 to 31;
+ variable j : integer;
begin
- sum_with_carry := (others => '0');
- newcrf := (others => '0');
- is_branch := '0';
- is_direct_branch := '0';
- taken_branch := '0';
- abs_branch := '0';
- hold_wr_data := '0';
-
- v := r;
- v.e := Execute1ToWritebackInit;
- v.redirect := '0';
- v.abs_br := '0';
- v.do_intr := '0';
- v.vector := 0;
- v.br_offset := (others => '0');
- v.redir_mode := ctrl.msr(MSR_IR) & not ctrl.msr(MSR_PR) &
- not ctrl.msr(MSR_LE) & not ctrl.msr(MSR_SF);
- v.taken_br := '0';
- v.br_last := '0';
-
- lv := Execute1ToLoadstore1Init;
- fv := Execute1ToFPUInit;
-
- -- XER forwarding. To avoid having to track XER hazards, we use
- -- the previously latched value. Since the XER common bits
- -- (SO, OV[32] and CA[32]) are only modified by instructions that are
- -- handled here, we can just forward the result being sent to
- -- writeback.
- if r.e.write_xerc_enable = '1' or r.busy = '1' then
- v.e.xerc := r.e.xerc;
- else
- v.e.xerc := e_in.xerc;
- end if;
-
- -- CR forwarding
- cr_in <= e_in.cr;
- if EX1_BYPASS and e_in.bypass_cr = '1' and r.e.write_cr_enable = '1' then
- for i in 0 to 7 loop
- if r.e.write_cr_mask(i) = '1' then
- cr_in(i * 4 + 3 downto i * 4) <= r.e.write_cr_data(i * 4 + 3 downto i * 4);
- end if;
- end loop;
- end if;
-
- v.mul_in_progress := '0';
- v.div_in_progress := '0';
- v.cntz_in_progress := '0';
- v.mul_finish := '0';
-
- spr_result <= (others => '0');
- spr_val := (others => '0');
-
-- Main adder
if e_in.invert_a = '0' then
a_inv := a_in;
b_or_m1 := (others => '1');
end if;
sum_with_carry := ppc_adde(a_inv, b_or_m1,
- decode_input_carry(e_in.input_carry, v.e.xerc));
+ decode_input_carry(e_in.input_carry, xerc_in));
adder_result <= sum_with_carry(63 downto 0);
- carry_32 := sum_with_carry(32) xor a_inv(32) xor b_in(32);
- carry_64 := sum_with_carry(64);
+ carry_32 <= sum_with_carry(32) xor a_inv(32) xor b_in(32);
+ carry_64 <= sum_with_carry(64);
+ overflow_32 <= calc_ov(a_inv(31), b_in(31), carry_32, sum_with_carry(31));
+ overflow_64 <= calc_ov(a_inv(63), b_in(63), carry_64, sum_with_carry(63));
-- signals to multiply and divide units
sign1 := '0';
end if;
-- Interface to multiply and divide units
- x_to_multiply <= MultiplyInputInit;
- x_to_multiply.is_32bit <= e_in.is_32bit;
-
- x_to_divider <= Execute1ToDividerInit;
x_to_divider.is_signed <= e_in.is_signed;
x_to_divider.is_32bit <= e_in.is_32bit;
+ x_to_divider.is_extended <= '0';
+ x_to_divider.is_modulus <= '0';
if e_in.insn_type = OP_MOD then
x_to_divider.is_modulus <= '1';
end if;
addend := not addend;
end if;
+ x_to_multiply.is_32bit <= e_in.is_32bit;
x_to_multiply.not_result <= sign1 xor sign2;
x_to_multiply.addend <= addend;
x_to_divider.neg_result <= sign1 xor (sign2 and not x_to_divider.is_modulus);
zerohi := not (or (a_in(63 downto 32) xor b_in(63 downto 32)));
if zerolo = '1' and (l = '0' or zerohi = '1') then
-- values are equal
- trapval := "00100";
+ trapval <= "00100";
else
a_lt_lo := '0';
a_lt_hi := '0';
if msb_a /= msb_b then
-- Comparison is clear from MSB difference.
-- for signed, 0 is greater; for unsigned, 1 is greater
- trapval := msb_a & msb_b & '0' & msb_b & msb_a;
+ trapval <= msb_a & msb_b & '0' & msb_b & msb_a;
else
-- MSBs are equal, so signed and unsigned comparisons give the
-- same answer.
- trapval := a_lt & not a_lt & '0' & a_lt & not a_lt;
+ trapval <= a_lt & not a_lt & '0' & a_lt & not a_lt;
end if;
end if;
+ -- CR result mux
+ bf := insn_bf(e_in.insn);
+ crnum := to_integer(unsigned(bf));
+ newcrf := (others => '0');
+ case current.sub_select is
+ when "000" =>
+ -- CMP and CMPL instructions
+ if e_in.is_signed = '1' then
+ newcrf := trapval(4 downto 2) & xerc_in.so;
+ else
+ newcrf := trapval(1 downto 0) & trapval(2) & xerc_in.so;
+ end if;
+ when "001" =>
+ newcrf := ppc_cmprb(a_in, b_in, insn_l(e_in.insn));
+ when "010" =>
+ newcrf := ppc_cmpeqb(a_in, b_in);
+ when "011" =>
+ if current.insn(1) = '1' then
+ -- CR logical instructions
+ j := (7 - crnum) * 4;
+ newcrf := cr_in(j + 3 downto j);
+ bt := insn_bt(e_in.insn);
+ ba := insn_ba(e_in.insn);
+ bb := insn_bb(e_in.insn);
+ btnum := 3 - to_integer(unsigned(bt(1 downto 0)));
+ banum := 31 - to_integer(unsigned(ba));
+ bbnum := 31 - to_integer(unsigned(bb));
+ -- Bits 6-9 of the instruction word give the truth table
+ -- of the requested logical operation
+ cr_operands := cr_in(banum) & cr_in(bbnum);
+ crresult := e_in.insn(6 + to_integer(unsigned(cr_operands)));
+ for i in 0 to 3 loop
+ if i = btnum then
+ newcrf(i) := crresult;
+ end if;
+ end loop;
+ else
+ -- MCRF
+ bfa := insn_bfa(e_in.insn);
+ scrnum := to_integer(unsigned(bfa));
+ j := (7 - scrnum) * 4;
+ newcrf := cr_in(j + 3 downto j);
+ end if;
+ when "100" =>
+ -- MCRXRX
+ newcrf := xerc_in.ov & xerc_in.ca & xerc_in.ov32 & xerc_in.ca32;
+ when others =>
+ end case;
+ if current.insn_type = OP_MTCRF then
+ if e_in.insn(20) = '0' then
+ -- mtcrf
+ write_cr_mask <= insn_fxm(e_in.insn);
+ else
+ -- mtocrf: We require one hot priority encoding here
+ crnum := fxm_to_num(insn_fxm(e_in.insn));
+ write_cr_mask <= num_to_fxm(crnum);
+ end if;
+ write_cr_data <= c_in(31 downto 0);
+ else
+ write_cr_mask <= num_to_fxm(crnum);
+ write_cr_data <= newcrf & newcrf & newcrf & newcrf &
+ newcrf & newcrf & newcrf & newcrf;
+ end if;
+
+ end process;
+
+ execute1_1: process(all)
+ variable v : reg_type;
+ variable lo, hi : integer;
+ variable sh, mb, me : std_ulogic_vector(5 downto 0);
+ variable bo, bi : std_ulogic_vector(4 downto 0);
+ variable overflow : std_ulogic;
+ variable lv : Execute1ToLoadstore1Type;
+ variable irq_valid : std_ulogic;
+ variable exception : std_ulogic;
+ variable illegal : std_ulogic;
+ variable is_branch : std_ulogic;
+ variable is_direct_branch : std_ulogic;
+ variable taken_branch : std_ulogic;
+ variable abs_branch : std_ulogic;
+ variable spr_val : std_ulogic_vector(63 downto 0);
+ variable do_trace : std_ulogic;
+ variable hold_wr_data : std_ulogic;
+ variable fv : Execute1ToFPUType;
+ begin
+ is_branch := '0';
+ is_direct_branch := '0';
+ taken_branch := '0';
+ abs_branch := '0';
+ hold_wr_data := '0';
+
+ v := r;
+ v.e := Execute1ToWritebackInit;
+ v.e.redir_mode := ctrl.msr(MSR_IR) & not ctrl.msr(MSR_PR) &
+ not ctrl.msr(MSR_LE) & not ctrl.msr(MSR_SF);
+ v.e.xerc := xerc_in;
+
+ lv := Execute1ToLoadstore1Init;
+ fv := Execute1ToFPUInit;
+
+ x_to_multiply.valid <= '0';
+ x_to_divider.valid <= '0';
+ v.mul_in_progress := '0';
+ v.div_in_progress := '0';
+ v.cntz_in_progress := '0';
+ v.mul_finish := '0';
+
+ spr_result <= (others => '0');
+ spr_val := (others => '0');
+
ctrl_tmp <= ctrl;
-- FIXME: run at 512MHz not core freq
ctrl_tmp.tb <= std_ulogic_vector(unsigned(ctrl.tb) + 1);
irq_valid := '0';
if ctrl.msr(MSR_EE) = '1' then
if ctrl.dec(63) = '1' then
- v.vector := 16#900#;
+ v.e.intr_vec := 16#900#;
report "IRQ valid: DEC";
irq_valid := '1';
elsif ext_irq_in = '1' then
- v.vector := 16#500#;
+ v.e.intr_vec := 16#500#;
report "IRQ valid: External";
irq_valid := '1';
end if;
rot_clear_right <= '1' when e_in.insn_type = OP_RLC or e_in.insn_type = OP_RLCR else '0';
rot_sign_ext <= '1' when e_in.insn_type = OP_EXTSWSLI else '0';
- ctrl_tmp.srr1 <= msr_copy(ctrl.msr);
- ctrl_tmp.irq_state <= WRITE_SRR0;
+ v.e.srr1 := (others => '0');
exception := '0';
illegal := '0';
- exception_nextpc := '0';
- v.e.exc_write_enable := '0';
- v.e.exc_write_reg := fast_spr_num(SPR_SRR0);
if valid_in = '1' then
- v.e.exc_write_data := e_in.nia;
- v.last_nia := e_in.nia;
+ v.e.last_nia := e_in.nia;
else
- v.e.exc_write_data := r.last_nia;
+ v.e.last_nia := r.e.last_nia;
end if;
v.e.mode_32bit := not ctrl.msr(MSR_SF);
+ v.e.instr_tag := current.instr_tag;
do_trace := valid_in and ctrl.msr(MSR_SE);
if valid_in = '1' then
-- Determine if there is any exception to be taken
-- before/instead of executing this instruction
- if valid_in = '1' and e_in.second = '0' then
+ if valid_in = '1' and e_in.second = '0' and l_in.in_progress = '0' then
if HAS_FPU and r.fp_exception_next = '1' then
-- This is used for FP-type program interrupts that
-- become pending due to MSR[FE0,FE1] changing from 00 to non-zero.
exception := '1';
- v.vector := 16#700#;
- ctrl_tmp.srr1(63 - 43) <= '1';
- ctrl_tmp.srr1(63 - 47) <= '1';
+ v.e.intr_vec := 16#700#;
+ v.e.srr1(47 - 43) := '1';
+ v.e.srr1(47 - 47) := '1';
elsif r.trace_next = '1' then
-- Generate a trace interrupt rather than executing the next instruction
-- or taking any asynchronous interrupt
exception := '1';
- v.vector := 16#d00#;
- ctrl_tmp.srr1(63 - 33) <= '1';
+ v.e.intr_vec := 16#d00#;
+ v.e.srr1(47 - 33) := '1';
if r.prev_op = OP_LOAD or r.prev_op = OP_ICBI or r.prev_op = OP_ICBT or
r.prev_op = OP_DCBT or r.prev_op = OP_DCBST or r.prev_op = OP_DCBF then
- ctrl_tmp.srr1(63 - 35) <= '1';
+ v.e.srr1(47 - 35) := '1';
elsif r.prev_op = OP_STORE or r.prev_op = OP_DCBZ or r.prev_op = OP_DCBTST then
- ctrl_tmp.srr1(63 - 36) <= '1';
+ v.e.srr1(47 - 36) := '1';
end if;
elsif irq_valid = '1' then
elsif ctrl.msr(MSR_PR) = '1' and instr_is_privileged(e_in.insn_type, e_in.insn) then
-- generate a program interrupt
exception := '1';
- v.vector := 16#700#;
+ v.e.intr_vec := 16#700#;
-- set bit 45 to indicate privileged instruction type interrupt
- ctrl_tmp.srr1(63 - 45) <= '1';
+ v.e.srr1(47 - 45) := '1';
report "privileged instruction";
elsif not HAS_FPU and e_in.fac = FPU then
elsif HAS_FPU and ctrl.msr(MSR_FP) = '0' and e_in.fac = FPU then
-- generate a floating-point unavailable interrupt
exception := '1';
- v.vector := 16#800#;
+ v.e.intr_vec := 16#800#;
report "FP unavailable interrupt";
end if;
end if;
if valid_in = '1' and exception = '0' and illegal = '0' and e_in.unit = ALU then
- report "execute nia " & to_hstring(e_in.nia);
-
v.cur_instr := e_in;
- v.next_lr := next_nia;
v.e.valid := '1';
case_0: case e_in.insn_type is
-- we need two cycles to write srr0 and 1
if e_in.insn(1) = '1' then
exception := '1';
- exception_nextpc := '1';
- v.vector := 16#C00#;
+ v.e.intr_vec := 16#C00#;
+ v.e.last_nia := next_nia;
report "sc";
else
illegal := '1';
else
v.e.xerc.ov := carry_64;
v.e.xerc.ov32 := carry_32;
- v.e.write_xerc_enable := '1';
end if;
end if;
if e_in.oe = '1' then
- set_ov(v.e,
- calc_ov(a_inv(63), b_in(63), carry_64, sum_with_carry(63)),
- calc_ov(a_inv(31), b_in(31), carry_32, sum_with_carry(31)));
+ set_ov(v.e, overflow_64, overflow_32);
end if;
when OP_CMP =>
- -- CMP and CMPL instructions
- if e_in.is_signed = '1' then
- newcrf := trapval(4 downto 2) & v.e.xerc.so;
- else
- newcrf := trapval(1 downto 0) & trapval(2) & v.e.xerc.so;
- end if;
- bf := insn_bf(e_in.insn);
- crnum := to_integer(unsigned(bf));
- v.e.write_cr_enable := '1';
- v.e.write_cr_mask := num_to_fxm(crnum);
- for i in 0 to 7 loop
- lo := i*4;
- hi := lo + 3;
- v.e.write_cr_data(hi downto lo) := newcrf;
- end loop;
when OP_TRAP =>
-- trap instructions (tw, twi, td, tdi)
- v.vector := 16#700#;
+ v.e.intr_vec := 16#700#;
-- set bit 46 to say trap occurred
- ctrl_tmp.srr1(63 - 46) <= '1';
+ v.e.srr1(47 - 46) := '1';
if or (trapval and insn_to(e_in.insn)) = '1' then
-- generate trap-type program interrupt
exception := '1';
end if;
when OP_ADDG6S =>
when OP_CMPRB =>
- newcrf := ppc_cmprb(a_in, b_in, insn_l(e_in.insn));
- bf := insn_bf(e_in.insn);
- crnum := to_integer(unsigned(bf));
- v.e.write_cr_enable := '1';
- v.e.write_cr_mask := num_to_fxm(crnum);
- v.e.write_cr_data := newcrf & newcrf & newcrf & newcrf &
- newcrf & newcrf & newcrf & newcrf;
when OP_CMPEQB =>
- newcrf := ppc_cmpeqb(a_in, b_in);
- bf := insn_bf(e_in.insn);
- crnum := to_integer(unsigned(bf));
- v.e.write_cr_enable := '1';
- v.e.write_cr_mask := num_to_fxm(crnum);
- v.e.write_cr_data := newcrf & newcrf & newcrf & newcrf &
- newcrf & newcrf & newcrf & newcrf;
when OP_AND | OP_OR | OP_XOR | OP_POPCNT | OP_PRTY | OP_CMPB | OP_EXTS |
OP_BPERM | OP_BCD =>
end if;
when OP_RFID =>
- v.redir_mode := (a_in(MSR_IR) or a_in(MSR_PR)) & not a_in(MSR_PR) &
- not a_in(MSR_LE) & not a_in(MSR_SF);
+ v.e.redir_mode := (a_in(MSR_IR) or a_in(MSR_PR)) & not a_in(MSR_PR) &
+ not a_in(MSR_LE) & not a_in(MSR_SF);
-- Can't use msr_copy here because the partial function MSR
-- bits should be left unchanged, not zeroed.
ctrl_tmp.msr(63 downto 31) <= a_in(63 downto 31);
v.cntz_in_progress := '1';
v.busy := '1';
when OP_ISEL =>
- when OP_CROP =>
- cr_op := insn_cr(e_in.insn);
- report "CR OP " & to_hstring(cr_op);
- if cr_op(0) = '0' then -- MCRF
- bf := insn_bf(e_in.insn);
- bfa := insn_bfa(e_in.insn);
- v.e.write_cr_enable := '1';
- crnum := to_integer(unsigned(bf));
- scrnum := to_integer(unsigned(bfa));
- v.e.write_cr_mask := num_to_fxm(crnum);
- for i in 0 to 7 loop
- lo := (7-i)*4;
- hi := lo + 3;
- if i = scrnum then
- newcrf := cr_in(hi downto lo);
- end if;
- end loop;
- for i in 0 to 7 loop
- lo := i*4;
- hi := lo + 3;
- v.e.write_cr_data(hi downto lo) := newcrf;
- end loop;
- else
- v.e.write_cr_enable := '1';
- bt := insn_bt(e_in.insn);
- ba := insn_ba(e_in.insn);
- bb := insn_bb(e_in.insn);
- btnum := 31 - to_integer(unsigned(bt));
- banum := 31 - to_integer(unsigned(ba));
- bbnum := 31 - to_integer(unsigned(bb));
- -- Bits 5-8 of cr_op give the truth table of the requested
- -- logical operation
- cr_operands := cr_in(banum) & cr_in(bbnum);
- crresult := cr_op(5 + to_integer(unsigned(cr_operands)));
- v.e.write_cr_mask := num_to_fxm((31-btnum) / 4);
- for i in 0 to 31 loop
- if i = btnum then
- v.e.write_cr_data(i) := crresult;
- else
- v.e.write_cr_data(i) := cr_in(i);
- end if;
- end loop;
- end if;
+ when OP_CROP =>
when OP_MCRXRX =>
- newcrf := v.e.xerc.ov & v.e.xerc.ca & v.e.xerc.ov32 & v.e.xerc.ca32;
- bf := insn_bf(e_in.insn);
- crnum := to_integer(unsigned(bf));
- v.e.write_cr_enable := '1';
- v.e.write_cr_mask := num_to_fxm(crnum);
- v.e.write_cr_data := newcrf & newcrf & newcrf & newcrf &
- newcrf & newcrf & newcrf & newcrf;
when OP_DARN =>
when OP_MFMSR =>
when OP_MFSPR =>
if decode_spr_num(e_in.insn) = SPR_XER then
-- bits 0:31 and 35:43 are treated as reserved and return 0s when read using mfxer
spr_val(63 downto 32) := (others => '0');
- spr_val(63-32) := v.e.xerc.so;
- spr_val(63-33) := v.e.xerc.ov;
- spr_val(63-34) := v.e.xerc.ca;
+ spr_val(63-32) := xerc_in.so;
+ spr_val(63-33) := xerc_in.ov;
+ spr_val(63-34) := xerc_in.ca;
spr_val(63-35 downto 63-43) := "000000000";
- spr_val(63-44) := v.e.xerc.ov32;
- spr_val(63-45) := v.e.xerc.ca32;
+ spr_val(63-44) := xerc_in.ov32;
+ spr_val(63-45) := xerc_in.ca32;
end if;
else
spr_val := c_in;
when OP_MFCR =>
when OP_MTCRF =>
- v.e.write_cr_enable := '1';
- if e_in.insn(20) = '0' then
- -- mtcrf
- v.e.write_cr_mask := insn_fxm(e_in.insn);
- else
- -- mtocrf: We require one hot priority encoding here
- crnum := fxm_to_num(insn_fxm(e_in.insn));
- v.e.write_cr_mask := num_to_fxm(crnum);
- end if;
- v.e.write_cr_data := c_in(31 downto 0);
when OP_MTMSRD =>
if e_in.insn(16) = '1' then
-- just update EE and RI
v.e.xerc.ca := c_in(63-34);
v.e.xerc.ov32 := c_in(63-44);
v.e.xerc.ca32 := c_in(63-45);
- v.e.write_xerc_enable := '1';
end if;
else
-- slow spr
when OP_SETB =>
when OP_ISYNC =>
- v.redirect := '1';
- v.br_offset := std_ulogic_vector(to_unsigned(4, 64));
+ v.e.redirect := '1';
+ v.e.br_offset := std_ulogic_vector(to_unsigned(4, 64));
when OP_ICBI =>
icache_inval <= '1';
ctrl_tmp.cfar <= e_in.nia;
end if;
if taken_branch = '1' then
- v.br_offset := b_in;
- v.abs_br := abs_branch;
+ v.e.br_offset := b_in;
+ v.e.abs_br := abs_branch;
else
- v.br_offset := std_ulogic_vector(to_unsigned(4, 64));
+ v.e.br_offset := std_ulogic_vector(to_unsigned(4, 64));
end if;
if taken_branch /= e_in.br_pred then
- v.redirect := '1';
+ v.e.redirect := '1';
end if;
- v.br_last := is_direct_branch;
- v.taken_br := taken_branch;
+ v.e.br_last := is_direct_branch;
+ v.e.br_taken := taken_branch;
end if;
elsif valid_in = '1' and exception = '0' and illegal = '0' then
-- The following cases all occur when r.busy = 1 and therefore
-- valid_in = 0. Hence they don't happen in the same cycle as any of
-- the cases above which depend on valid_in = 1.
-
- if ctrl.irq_state = WRITE_SRR1 then
- v.e.exc_write_reg := fast_spr_num(SPR_SRR1);
- v.e.exc_write_data := ctrl.srr1;
- v.e.exc_write_enable := '1';
- ctrl_tmp.msr(MSR_SF) <= '1';
- ctrl_tmp.msr(MSR_EE) <= '0';
- ctrl_tmp.msr(MSR_PR) <= '0';
- ctrl_tmp.msr(MSR_SE) <= '0';
- ctrl_tmp.msr(MSR_BE) <= '0';
- ctrl_tmp.msr(MSR_FP) <= '0';
- ctrl_tmp.msr(MSR_FE0) <= '0';
- ctrl_tmp.msr(MSR_FE1) <= '0';
- ctrl_tmp.msr(MSR_IR) <= '0';
- ctrl_tmp.msr(MSR_DR) <= '0';
- ctrl_tmp.msr(MSR_RI) <= '0';
- ctrl_tmp.msr(MSR_LE) <= '1';
- v.trace_next := '0';
- v.fp_exception_next := '0';
- report "Writing SRR1: " & to_hstring(ctrl.srr1);
-
- elsif r.cntz_in_progress = '1' then
+ if r.cntz_in_progress = '1' then
-- cnt[lt]z always takes two cycles
v.e.valid := '1';
elsif r.mul_in_progress = '1' or r.div_in_progress = '1' then
v.mul_finish := '1';
v.busy := '1';
else
- v.e.write_xerc_enable := current.oe;
-- We must test oe because the RC update code in writeback
-- will use the xerc value to set CR0:SO so we must not clobber
-- xerc if OE wasn't set.
end if;
elsif r.mul_finish = '1' then
hold_wr_data := '1';
- v.e.write_xerc_enable := current.oe;
v.e.xerc.ov := multiply_to_x.overflow;
v.e.xerc.ov32 := multiply_to_x.overflow;
if multiply_to_x.overflow = '1' then
v.e.valid := '1';
end if;
- -- Generate FP-type program interrupt. fp_in.interrupt will only
- -- be set during the execution of a FP instruction.
- -- The case where MSR[FE0,FE1] goes from zero to non-zero is
- -- handled above by mtmsrd and rfid setting v.fp_exception_next.
- if HAS_FPU and fp_in.interrupt = '1' then
- v.vector := 16#700#;
- ctrl_tmp.srr1(63 - 43) <= '1';
+ if illegal = '1' then
exception := '1';
- end if;
-
- if illegal = '1' or (HAS_FPU and fp_in.illegal = '1') then
- exception := '1';
- v.vector := 16#700#;
+ v.e.intr_vec := 16#700#;
-- Since we aren't doing Hypervisor emulation assist (0xe40) we
-- set bit 44 to indicate we have an illegal
- ctrl_tmp.srr1(63 - 44) <= '1';
+ v.e.srr1(47 - 44) := '1';
report "illegal";
end if;
- if exception = '1' then
- v.e.exc_write_enable := '1';
- if exception_nextpc = '1' then
- v.e.exc_write_data := next_nia;
- end if;
- end if;
- -- generate DSI or DSegI for load/store exceptions
- -- or ISI or ISegI for instruction fetch exceptions
- if l_in.exception = '1' then
- if l_in.alignment = '1' then
- v.vector := 16#600#;
- elsif l_in.instr_fault = '0' then
- if l_in.segment_fault = '0' then
- v.vector := 16#300#;
- else
- v.vector := 16#380#;
- end if;
- else
- if l_in.segment_fault = '0' then
- ctrl_tmp.srr1(63 - 33) <= l_in.invalid;
- ctrl_tmp.srr1(63 - 35) <= l_in.perm_error; -- noexec fault
- ctrl_tmp.srr1(63 - 44) <= l_in.badtree;
- ctrl_tmp.srr1(63 - 45) <= l_in.rc_error;
- v.vector := 16#400#;
- else
- v.vector := 16#480#;
- end if;
- end if;
- v.e.exc_write_enable := '1';
- v.e.exc_write_reg := fast_spr_num(SPR_SRR0);
- report "ldst exception writing srr0=" & to_hstring(r.last_nia);
- end if;
-
- if exception = '1' or l_in.exception = '1' then
- ctrl_tmp.irq_state <= WRITE_SRR1;
- v.redirect := '1';
- v.do_intr := '1';
- end if;
+ v.e.interrupt := exception;
if do_trace = '1' then
v.trace_next := '1';
end if;
+ if interrupt_in = '1' then
+ ctrl_tmp.msr(MSR_SF) <= '1';
+ ctrl_tmp.msr(MSR_EE) <= '0';
+ ctrl_tmp.msr(MSR_PR) <= '0';
+ ctrl_tmp.msr(MSR_SE) <= '0';
+ ctrl_tmp.msr(MSR_BE) <= '0';
+ ctrl_tmp.msr(MSR_FP) <= '0';
+ ctrl_tmp.msr(MSR_FE0) <= '0';
+ ctrl_tmp.msr(MSR_FE1) <= '0';
+ ctrl_tmp.msr(MSR_IR) <= '0';
+ ctrl_tmp.msr(MSR_DR) <= '0';
+ ctrl_tmp.msr(MSR_RI) <= '0';
+ ctrl_tmp.msr(MSR_LE) <= '1';
+ v.trace_next := '0';
+ v.fp_exception_next := '0';
+ end if;
+
if hold_wr_data = '0' then
v.e.write_data := alu_result;
else
v.e.write_reg := current.write_reg;
v.e.write_enable := current.write_reg_enable and v.e.valid and not exception;
v.e.rc := current.rc and v.e.valid and not exception;
-
- -- Defer completion for one cycle when redirecting.
- -- This also ensures r.busy = 1 when ctrl.irq_state = WRITE_SRR1
- if v.redirect = '1' then
- v.busy := '1';
- v.e.valid := '0';
- end if;
- if r.redirect = '1' then
- v.e.valid := '1';
- end if;
-
- -- Outputs to fetch1
- f.redirect := r.redirect;
- f.br_nia := r.last_nia;
- f.br_last := r.br_last and not r.do_intr;
- f.br_taken := r.taken_br;
- if r.do_intr = '1' then
- f.redirect_nia := std_ulogic_vector(to_unsigned(r.vector, 64));
- f.virt_mode := '0';
- f.priv_mode := '1';
- -- XXX need an interrupt LE bit here, e.g. from LPCR
- f.big_endian := '0';
- f.mode_32bit := '0';
- else
- if r.abs_br = '1' then
- f.redirect_nia := r.br_offset;
+ v.e.write_cr_data := write_cr_data;
+ v.e.write_cr_mask := write_cr_mask;
+ v.e.write_cr_enable := current.output_cr and v.e.valid and not exception;
+ v.e.write_xerc_enable := current.output_xer and v.e.valid and not exception;
+
+ bypass_data.tag.valid <= current.instr_tag.valid and current.write_reg_enable and v.e.valid;
+ bypass_data.tag.tag <= current.instr_tag.tag;
+ bypass_data.data <= v.e.write_data;
+
+ bypass_cr_data.tag.valid <= current.instr_tag.valid and current.output_cr and v.e.valid;
+ bypass_cr_data.tag.tag <= current.instr_tag.tag;
+ for i in 0 to 7 loop
+ if v.e.write_cr_mask(i) = '1' then
+ bypass_cr_data.data(i*4 + 3 downto i*4) <= v.e.write_cr_data(i*4 + 3 downto i*4);
else
- f.redirect_nia := std_ulogic_vector(unsigned(r.last_nia) + unsigned(r.br_offset));
+ bypass_cr_data.data(i*4 + 3 downto i*4) <= cr_in(i*4 + 3 downto i*4);
end if;
- -- send MSR[IR], ~MSR[PR], ~MSR[LE] and ~MSR[SF] up to fetch1
- f.virt_mode := r.redir_mode(3);
- f.priv_mode := r.redir_mode(2);
- f.big_endian := r.redir_mode(1);
- f.mode_32bit := r.redir_mode(0);
- end if;
+ end loop;
-- Outputs to loadstore1 (async)
lv.op := e_in.insn_type;
lv.nia := e_in.nia;
+ lv.instr_tag := e_in.instr_tag;
lv.addr1 := a_in;
lv.addr2 := b_in;
lv.data := c_in;
lv.byte_reverse := e_in.byte_reverse xnor ctrl.msr(MSR_LE);
lv.sign_extend := e_in.sign_extend;
lv.update := e_in.update;
- lv.xerc := v.e.xerc;
+ lv.xerc := xerc_in;
lv.reserve := e_in.reserve;
lv.rc := e_in.rc;
lv.insn := e_in.insn;
fv.op := e_in.insn_type;
fv.nia := e_in.nia;
fv.insn := e_in.insn;
+ fv.itag := e_in.instr_tag;
fv.single := e_in.is_32bit;
fv.fe_mode := ctrl.msr(MSR_FE0) & ctrl.msr(MSR_FE1);
fv.fra := a_in;
rin <= v;
-- update outputs
- f_out <= f;
l_out <= lv;
e_out <= r.e;
+ e_out.msr <= msr_copy(ctrl.msr);
fp_out <= fv;
- flush_out <= f_out.redirect;
exception_log <= exception;
irq_valid_log <= irq_valid;
ctrl.msr(MSR_IR) & ctrl.msr(MSR_DR) &
exception_log &
irq_valid_log &
- std_ulogic_vector(to_unsigned(irq_state_t'pos(ctrl.irq_state), 1)) &
+ interrupt_in &
"000" &
r.e.write_enable &
r.e.valid &
- f_out.redirect &
+ (r.e.redirect or r.e.interrupt) &
r.busy &
- flush_out;
+ flush_in;
end if;
end process;
log_out <= log_data;
projects / microwatt.git / blobdiff