#define SSTATUS_SPP MSTATUS_MPP
#endif
+ # For RV64, make sure UXL encodes RV64. (UXL does not exist for RV32.)
+#if __riscv_xlen == 64
+ # If running in M mode, read misa to check existence of U mode.
+ # Otherwise, if in S mode, then U mode must exist and we don't need to check.
+#ifdef __MACHINE_MODE
+ csrr a0, misa
+ srli a0, a0, 'U' - 'A'
+ andi a0, a0, 1
+ beqz a0, 1f
+#endif
+ # If U mode is present, UXL should be 2 (XLEN = 64-bit)
+ TEST_CASE(13, a0, SSTATUS_UXL & (SSTATUS_UXL << 1), csrr a0, sstatus; li a1, SSTATUS_UXL; and a0, a0, a1)
+#ifdef __MACHINE_MODE
+ j 2f
+1:
+ # If U mode is not present, UXL should be 0
+ TEST_CASE(14, a0, 0, csrr a0, sstatus; li a1, SSTATUS_UXL; and a0, a0, a1)
+2:
+#endif
+#endif
+
csrwi sscratch, 3
TEST_CASE( 2, a0, 3, csrr a0, sscratch);
TEST_CASE( 3, a1, 3, csrrci a1, sscratch, 1);
TEST_CASE( 9, a0, 0xbadbeef, csrr a0, sscratch);
#ifdef __MACHINE_MODE
+ # Is F extension present?
+ csrr a0, misa
+ andi a0, a0, (1 << ('F' - 'A'))
+ beqz a0, 1f
+ # If so, make sure FP stores have no effect when mstatus.FS is off.
+ li a1, MSTATUS_FS
+ csrs mstatus, a1
+#ifdef __riscv_flen
+ fmv.s.x f0, x0
+ csrc mstatus, a1
+ la a1, fsw_data
+ TEST_CASE(10, a0, 1, fsw f0, (a1); lw a0, (a1));
+#else
+ # Fail if this test is compiled without F but executed on a core with F.
+ TEST_CASE(10, zero, 1)
+#endif
+1:
+
# Figure out if 'U' is set in misa
csrr a0, misa # a0 = csr(misa)
srli a0, a0, 20 # a0 = a0 >> 20
andi a0, a0, 1 # a0 = a0 & 1
beqz a0, finish # if no user mode, skip the rest of these checks
-#endif
+#endif /* __MACHINE_MODE */
# jump to user land
li t0, SSTATUS_SPP
# Make sure writing the cycle counter causes an exception.
# Don't run in supervisor, as we don't delegate illegal instruction traps.
#ifdef __MACHINE_MODE
- TEST_CASE(10, a0, 255, li a0, 255; csrrw a0, cycle, x0);
+ TEST_CASE(11, a0, 255, li a0, 255; csrrw a0, cycle, x0);
#endif
# Make sure reading status in user mode causes an exception.
# Don't run in supervisor, as we don't delegate illegal instruction traps.
#ifdef __MACHINE_MODE
- TEST_CASE(11, a0, 255, li a0, 255; csrr a0, sstatus)
+ TEST_CASE(12, a0, 255, li a0, 255; csrr a0, sstatus)
#else
- TEST_CASE(11, x0, 0, nop)
+ TEST_CASE(12, x0, 0, nop)
#endif
finish:
.align 2
stvec_handler:
- # Trapping on tests 10 and 11 is good news.
+ # Trapping on tests 10-12 is good news.
# Note that since the test didn't complete, TESTNUM is smaller by 1.
li t0, 9
- beq TESTNUM, t0, privileged
- li t0, 10
- beq TESTNUM, t0, privileged
+ bltu TESTNUM, t0, 1f
+ li t0, 11
+ bleu TESTNUM, t0, privileged
+1:
# catch RVTEST_PASS and kick it up to M-mode
csrr t0, scause
.data
RVTEST_DATA_BEGIN
- TEST_DATA
+fsw_data: .word 1
RVTEST_DATA_END