from parse import *
from wire_def import *
from actual_pinmux import *
+from bus_transactors import *
if not os.path.exists("bsv_src"):
os.makedirs("bsv_src")
-bsv_file = open("./bsv_src/pinmux.bsv", "w")
-
copyright = '''
/*
This BSV file has been generated by the PinMux tool available at:
# ============================================#
# package and interface declaration followed by the generic io_cell definition
-bsv_file.write(header)
+with open("./bsv_src/pinmux.bsv", "w") as bsv_file:
+ bsv_file.write(header)
-bsv_file.write('''
+ bsv_file.write('''
// declare the method which will capture the user pin-mux
// selection values.The width of the input is dependent on the number
// of muxes happening per IO. For now we have a generalized width
// where each IO will have the same number of muxes.''')
-for cell in muxed_cells:
- bsv_file.write(mux_interface.format(cell[0],
+ for cell in muxed_cells:
+ bsv_file.write(mux_interface.format(cell[0],
int(math.log(len(cell) - 1, 2))))
-bsv_file.write('''
+ bsv_file.write('''
endinterface
interface PeripheralSide;
// declare the interface to the IO cells.
// Each IO cell will have 8 input field (output from pin mux
// and on output field (input to pinmux)''')
-for i in range(0, N_IO):
- bsv_file.write('''\n // interface for IO CEll-{0}''')
- bsv_file.write(io_interface.format(i))
-# ==============================================================
-
-# == create method definitions for all peripheral interfaces ==#
-for i in range(0, N_UART):
- bsv_file.write('''
- // interface declaration between UART-{0} and pinmux'''.format(i))
- bsv_file.write(uartinterface_decl.format(i))
-
-for i in range(0, N_SPI):
- bsv_file.write('''
- // interface declaration between SPI-{0} and pinmux'''.format(i))
- bsv_file.write(spiinterface_decl.format(i))
-
-for i in range(0, N_TWI):
- bsv_file.write('''
- // interface declaration between TWI-{0} and pinmux'''.format(i))
- bsv_file.write(twiinterface_decl.format(i))
-
-for i in range(0, N_SD):
+ for i in range(0, N_IO):
+ bsv_file.write('''\n // interface for IO CEll-{0}''')
+ bsv_file.write(io_interface.ifacefmt(i))
+ # ==============================================================
+
+ # == create method definitions for all peripheral interfaces ==#
+ for i in range(0, N_UART):
+ bsv_file.write('''
+ // interface declaration between UART-{0} and pinmux'''.format(i))
+ bsv_file.write(uartinterface_decl.ifacefmt(i))
+
+ for i in range(0, N_SPI):
+ bsv_file.write('''
+ // interface declaration between SPI-{0} and pinmux'''.format(i))
+ bsv_file.write(spiinterface_decl.ifacefmt(i))
+
+ for i in range(0, N_TWI):
+ bsv_file.write('''
+ // interface declaration between TWI-{0} and pinmux'''.format(i))
+ bsv_file.write(twiinterface_decl.ifacefmt(i))
+
+ for i in range(0, N_SD):
+ bsv_file.write('''
+ // interface declaration between SD-{0} and pinmux'''.format(i))
+ bsv_file.write(sdinterface_decl.ifacefmt(i))
+
+ for i in range(0, N_JTAG):
+ bsv_file.write('''
+ // interface declaration between JTAG-{0} and pinmux'''.format(i))
+ bsv_file.write(jtaginterface_decl.ifacefmt(i))
+
+ for i in range(0, N_PWM):
+ bsv_file.write('''
+ // interface declaration between PWM-{0} and pinmux'''.format(i))
+ bsv_file.write(pwminterface_decl.ifacefmt(i))
+ # ==============================================================
+
+ # ===== finish interface definition and start module definition=======
bsv_file.write('''
- // interface declaration between SD-{0} and pinmux'''.format(i))
- bsv_file.write(sdinterface_decl.format(i))
-
-for i in range(0, N_JTAG):
- bsv_file.write('''
- // interface declaration between JTAG-{0} and pinmux'''.format(i))
- bsv_file.write(jtaginterface_decl.format(i))
-
-for i in range(0, N_PWM):
- bsv_file.write('''
- // interface declaration between PWM-{0} and pinmux'''.format(i))
- bsv_file.write(pwminterface_decl.format(i))
-# ==============================================================
-
-# ===== finish interface definition and start module definition=======
-bsv_file.write('''
endinterface
interface Ifc_pinmux;
(*synthesize*)
module mkpinmux(Ifc_pinmux);
''')
-# ====================================================================
+ # ====================================================================
-# ======================= create wire and registers =================#
-bsv_file.write('''
+ # ======================= create wire and registers =================#
+ bsv_file.write('''
// the followins wires capture the pin-mux selection
// values for each mux assigned to a CELL
''')
-for cell in muxed_cells:
- bsv_file.write(muxwire.format(cell[0], int(math.log(len(cell) - 1, 2))))
-
+ for cell in muxed_cells:
+ bsv_file.write(muxwire.format(cell[0], int(math.log(len(cell) - 1, 2))))
-bsv_file.write(
- '''\n // following wires capture the values sent to the IO Cell''')
-for i in range(0, N_IO):
- bsv_file.write(generic_io.format(i))
-for i in range(0, N_UART):
bsv_file.write(
+ '''\n // following wires capture the values sent to the IO Cell''')
+ for i in range(0, N_IO):
+ bsv_file.write(generic_io.format(i))
+
+ for i in range(0, N_UART):
+ bsv_file.write(
'''\n // following wires capture signals to IO CELL if uart-{0} is
// allotted to it'''.format(i))
- bsv_file.write(uartwires.format(i))
+ bsv_file.write(uartwires.format(i))
-for i in range(0, N_SPI):
- bsv_file.write(
+ for i in range(0, N_SPI):
+ bsv_file.write(
'''\n // following wires capture signals to IO CELL if spi-{0} is
// allotted to it'''.format(i))
- bsv_file.write(spiwires.format(i))
+ bsv_file.write(spiwires.format(i))
-for i in range(0, N_TWI):
- bsv_file.write(
+ for i in range(0, N_TWI):
+ bsv_file.write(
'''\n // following wires capture signals to IO CELL if twi-{0} is
// allotted to it'''.format(i))
- bsv_file.write(twiwires.format(i))
+ bsv_file.write(twiwires.format(i))
-for i in range(0, N_SD):
- bsv_file.write(
+ for i in range(0, N_SD):
+ bsv_file.write(
'''\n // following wires capture signals to IO CELL if sd-{0} is
// allotted to it'''.format(i))
- bsv_file.write(sdwires.format(i))
+ bsv_file.write(sdwires.format(i))
-for i in range(0, N_JTAG):
- bsv_file.write(
+ for i in range(0, N_JTAG):
+ bsv_file.write(
'''\n // following wires capture signals to IO CELL if jtag-{0} is
// allotted to it'''.format(i))
- bsv_file.write(jtagwires.format(i))
+ bsv_file.write(jtagwires.format(i))
-for i in range(0, N_PWM):
- bsv_file.write(
+ for i in range(0, N_PWM):
+ bsv_file.write(
'''\n // following wires capture signals to IO CELL if pwm-{0} is
// allotted to it'''.format(i))
- bsv_file.write(pwmwires.format(i))
-bsv_file.write("\n")
-# ====================================================================
-# ========================= Actual pinmuxing ========================#
-bsv_file.write('''
+ bsv_file.write(pwmwires.format(i))
+ bsv_file.write("\n")
+ # ====================================================================
+ # ========================= Actual pinmuxing ========================#
+ bsv_file.write('''
/*====== This where the muxing starts for each io-cell======*/
''')
-bsv_file.write(pinmux)
-bsv_file.write('''
+ bsv_file.write(pinmux)
+ bsv_file.write('''
/*============================================================*/
''')
-# ====================================================================
-# ================= interface definitions for each method =============#
-bsv_file.write('''
+ # ====================================================================
+ # ================= interface definitions for each method =============#
+ bsv_file.write('''
interface mux_lines = interface MuxSelectionLines
''')
-for cell in muxed_cells:
- bsv_file.write(mux_interface_def.format(cell[0],
+ for cell in muxed_cells:
+ bsv_file.write(mux_interface_def.format(cell[0],
int(math.log(len(cell) - 1, 2))))
-bsv_file.write('''
+ bsv_file.write('''
endinterface;
interface peripheral_side = interface PeripheralSide
''')
-for i in range(0, N_IO):
- bsv_file.write(io_interface_def.format(i))
-for i in range(0, N_UART):
- bsv_file.write(uartinterface_def.format(i))
-for i in range(0, N_SPI):
- bsv_file.write(spiinterface_def.format(i))
-for i in range(0, N_TWI):
- bsv_file.write(twiinterface_def.format(i))
-for i in range(0, N_SD):
- bsv_file.write(sdinterface_def.format(i))
-for i in range(0, N_JTAG):
- bsv_file.write(jtaginterface_def.format(i))
-for i in range(0, N_PWM):
- bsv_file.write(pwminterface_def.format(i))
-bsv_file.write(footer)
-print("BSV file successfully generated: bsv_src/pinmux.bsv")
-# ======================================================================
-bsv_file.close()
-
-bsv_file = open('bsv_src/PinTop.bsv', 'w')
-bsv_file.write(copyright+'''
+ for i in range(0, N_IO):
+ bsv_file.write(io_interface.ifacedef(i))
+ for i in range(0, N_UART):
+ bsv_file.write(uartinterface_def.format(i))
+ for i in range(0, N_SPI):
+ bsv_file.write(spiinterface_def.format(i))
+ for i in range(0, N_TWI):
+ bsv_file.write(twiinterface_def.format(i))
+ for i in range(0, N_SD):
+ bsv_file.write(sdinterface_def.format(i))
+ for i in range(0, N_JTAG):
+ bsv_file.write(jtaginterface_def.format(i))
+ for i in range(0, N_PWM):
+ bsv_file.write(pwminterface_def.format(i))
+ bsv_file.write(footer)
+ print("BSV file successfully generated: bsv_src/pinmux.bsv")
+ # ======================================================================
+
+with open('bsv_src/PinTop.bsv', 'w') as bsv_file:
+ bsv_file.write(copyright+'''
package PinTop;
import pinmux::*;
interface Ifc_PintTop;
// declare the registers which will be used to mux the IOs
'''.format(ADDR_WIDTH, DATA_WIDTH))
-for cell in muxed_cells:
- bsv_file.write('''
- Reg#(Bit#({0})) rg_muxio_{1} <-mkReg(0);'''.format(
- int(math.log(len(cell) - 1, 2)), cell[0]))
+ for cell in muxed_cells:
+ bsv_file.write('''
+ Reg#(Bit#({0})) rg_muxio_{1} <-mkReg(0);'''.format(
+ int(math.log(len(cell) - 1, 2)), cell[0]))
-bsv_file.write('''
+ bsv_file.write('''
// rule to connect the registers to the selection lines of the
// pin-mux module
rule connect_selection_registers;''')
-for cell in muxed_cells:
- bsv_file.write('''
+ for cell in muxed_cells:
+ bsv_file.write('''
pinmux.mux_lines.cell{0}_mux(rg_muxio_{0});'''.format(cell[0]))
-bsv_file.write('''
+ bsv_file.write('''
endrule
// method definitions for the write user interface
method ActionValue#(Bool) write(Bit#({2}) addr, Bit#({3}) data);
Bool err=False;
case (addr[{0}:{1}])'''.format(upper_offset, lower_offset,
ADDR_WIDTH, DATA_WIDTH))
-index = 0
-for cell in muxed_cells:
- bsv_file.write('''
+ index = 0
+ for cell in muxed_cells:
+ bsv_file.write('''
{0}: rg_muxio_{1}<=truncate(data);'''.format(index, cell[0]))
- index = index + 1
+ index = index + 1
-bsv_file.write('''
+ bsv_file.write('''
default: err=True;
endcase
return err;
endmethod''')
-bsv_file.write('''
+ bsv_file.write('''
// method definitions for the read user interface
method Tuple2#(Bool,Bit#({3})) read(Bit#({2}) addr);
Bool err=False;
Bit#(32) data=0;
case (addr[{0}:{1}])'''.format(upper_offset, lower_offset,
ADDR_WIDTH, DATA_WIDTH))
-index = 0
-for cell in muxed_cells:
- bsv_file.write('''
+ index = 0
+ for cell in muxed_cells:
+ bsv_file.write('''
{0}: data=zeroExtend(rg_muxio_{1});'''.format(index, cell[0]))
- index = index + 1
+ index = index + 1
-bsv_file.write('''
+ bsv_file.write('''
default:err=True;
endcase
return tuple2(err,data);
endmodule
endpackage
''')
-bsv_file.close
+
+# ######## Generate bus transactors ################
+with open('bsv_src/bus.bsv', 'w') as bsv_file:
+ bsv_file.write(axi4_lite.format(ADDR_WIDTH, DATA_WIDTH))
+# ##################################################
+
projects / pinmux.git / blobdiff