from interfaces import flexbus1, flexbus2, sdram1, sdram2, mcu8080
from interfaces import eint, pwm, gpio, spi, i2c, emmc, sdmmc
from interfaces import quadspi, i2s
-from interfaces import display, display_fns, check_functions
-from interfaces import pinmerge, display_fixed, Pinouts
+from interfaces import pinmerge, Pinouts
+
+from ifaceprint import display, display_fns, check_functions
+from ifaceprint import display_fixed
+
def pinspec():
pinouts = Pinouts()
'E': 24,
'F': 10,
'G': 32,
- }
+ }
bankspec = {}
- pkeys = pinbanks.keys()
- pkeys.sort()
+ pkeys = sorted(pinbanks.keys())
offs = 0
for kn in pkeys:
bankspec[kn] = offs
pinmerge(pinouts, quadspi(bankspec, "0", ('B', 4), "B", 2, limit=4))
pinmerge(pinouts, uart(bankspec, "3", ('B', 16), "B", 2))
pinmerge(pinouts, i2c(bankspec, "3", ('B', 18), "B", 2))
- pinmerge(pinouts, pwm(bankspec, "0", ('B', 9), "B", mux=2))
- pinmerge(pinouts, pwm(bankspec, "1", ('B', 20), "B", mux=2))
- pinmerge(pinouts, pwm(bankspec, "2", ('B', 21), "B", mux=2))
+ pinmerge(pinouts, pwm(bankspec, "", ('B', 9), "B", 0, 1, mux=2))
+ pinmerge(pinouts, pwm(bankspec, "", ('B', 20), "B", 1, 2, mux=2))
pinmerge(pinouts, sdmmc(bankspec, "1", ('B', 22), "B", 2))
pinmerge(pinouts, eint(bankspec, "", ('B', 0), "B", 6, 4, mux=3))
pinmerge(pinouts, flexbus2(bankspec, "0", ('B', 4), "B", 3))
pinmerge(pinouts, eint(bankspec, "", ('C', 12), "C", 22, 8, mux=3))
pinmerge(pinouts, uart(bankspec, "2", ('C', 22), "C", 2))
pinmerge(pinouts, i2s(bankspec, "", ('C', 13), "C", 2))
- pinmerge(pinouts, pwm(bankspec, "2", ('C', 21), "C", mux=2))
+ pinmerge(pinouts, pwm(bankspec, "", ('C', 21), "C", 2, 1, mux=2))
# Bank D, 72-96
flexspec = {
pinmerge(pinouts, gpio(bankspec, "", ('D', 0), "D", 0, 24, 0))
pinmerge(pinouts, flexbus1(bankspec, "0", ('D', 0), "D", 1, spec=flexspec))
pinmerge(pinouts, i2c(bankspec, "2", ('D', 17), "D", 2))
- pinmerge(pinouts, pwm(bankspec, "0", ('D', 21), "D", mux=1))
- pinmerge(pinouts, pwm(bankspec, "1", ('D', 22), "D", mux=1))
- pinmerge(pinouts, pwm(bankspec, "2", ('D', 23), "D", mux=1))
+ pinmerge(pinouts, pwm(bankspec, "", ('D', 21), "D", 0, 3, mux=1))
pinmerge(pinouts, i2c(bankspec, "1", ('D', 10), "D", 3))
pinmerge(pinouts, i2c(bankspec, "3", ('D', 19), "D", 2))
pinmerge(pinouts, uartfull(bankspec, "0", ('D', 0), "D", 2))
pinmerge(pinouts, gpio(bankspec, "", ('F', 0), "F", 0, 10, 0))
pinmerge(pinouts, i2s(bankspec, "", ('F', 0), "F", 1))
pinmerge(pinouts, i2c(bankspec, "1", ('F', 6), "F", 2))
- pinmerge(pinouts, pwm(bankspec, "0", ('F', 8), "F", mux=2))
- pinmerge(pinouts, pwm(bankspec, "1", ('F', 9), "F", mux=2))
+ pinmerge(pinouts, pwm(bankspec, "", ('F', 8), "F", 0, 1, mux=2))
+ pinmerge(pinouts, pwm(bankspec, "", ('F', 9), "F", 1, 1, mux=2))
pinmerge(pinouts, uart(bankspec, "4", ('F', 8), "F", 1))
pinmerge(pinouts, sdmmc(bankspec, "3", ('F', 0), "F", 2))
pinmerge(pinouts, eint(bankspec, "", ('F', 0), "F", 18, 4, mux=3))
- pinmerge(pinouts, pwm(bankspec, "2", ('F', 4), "F", mux=3))
+ pinmerge(pinouts, pwm(bankspec, "", ('F', 4), "F", 2, 1, mux=3))
pinmerge(pinouts, eint(bankspec, "", ('F', 5), "F", 7, 1, mux=3))
pinmerge(pinouts, eint(bankspec, "", ('F', 6), "F", 28, 4, mux=3))
print
fixedpins = {
- 'DDR3':
- ['SDQ0', 'SDQ1', 'SDQ2', 'SDQ3', 'SDQ4', 'SDQ5', 'SDQ6', 'SDQ7',
- 'SDQ8', 'SDQ9', 'SDQ10', 'SDQ11', 'SDQ12', 'SDQ13', 'SDQ14', 'SDQ15',
- 'SDQ16', 'SDQ17', 'SDQ18', 'SDQ19', 'SDQ20', 'SDQ21', 'SDQ22', 'SDQ23',
- 'SDQ24', 'SDQ25', 'SDQ26', 'SDQ27', 'SDQ28', 'SDQ29', 'SDQ30', 'SDQ31',
- 'SVREF0', 'SVREF1', 'SVREF2', 'SVREF3',
- 'SDQS0', 'SDQS0#', 'SDQS1', 'SDQS1#',
- 'SDQS2', 'SDQS2#', 'SDQS3', 'SDQS3#',
- 'SDQM0', 'SDQM1', 'SDQM2', 'SDQM3',
- 'SCK#', 'SCK', 'SCKE0', 'SCKE1',
- 'SA0', 'SA1', 'SA2', 'SA3', 'SA4', 'SA5', 'SA6', 'SA7',
- 'SA8', 'SA9', 'SA10', 'SA11', 'SA12', 'SA13', 'SA14',
- 'SBA0', 'SBA1', 'SBA2',
- 'SWE', 'SCAS', 'SRAS',
- 'SCS0', 'SCS1',
- 'SZQ', 'SRST',
- 'SDBG0', 'SDBG1', 'ADBG',
- 'ODT0', 'ODT1'
+ 'DDR3': [
+ 'SDQ0',
+ 'SDQ1',
+ 'SDQ2',
+ 'SDQ3',
+ 'SDQ4',
+ 'SDQ5',
+ 'SDQ6',
+ 'SDQ7',
+ 'SDQ8',
+ 'SDQ9',
+ 'SDQ10',
+ 'SDQ11',
+ 'SDQ12',
+ 'SDQ13',
+ 'SDQ14',
+ 'SDQ15',
+ 'SDQ16',
+ 'SDQ17',
+ 'SDQ18',
+ 'SDQ19',
+ 'SDQ20',
+ 'SDQ21',
+ 'SDQ22',
+ 'SDQ23',
+ 'SDQ24',
+ 'SDQ25',
+ 'SDQ26',
+ 'SDQ27',
+ 'SDQ28',
+ 'SDQ29',
+ 'SDQ30',
+ 'SDQ31',
+ 'SVREF0',
+ 'SVREF1',
+ 'SVREF2',
+ 'SVREF3',
+ 'SDQS0',
+ 'SDQS0#',
+ 'SDQS1',
+ 'SDQS1#',
+ 'SDQS2',
+ 'SDQS2#',
+ 'SDQS3',
+ 'SDQS3#',
+ 'SDQM0',
+ 'SDQM1',
+ 'SDQM2',
+ 'SDQM3',
+ 'SCK#',
+ 'SCK',
+ 'SCKE0',
+ 'SCKE1',
+ 'SA0',
+ 'SA1',
+ 'SA2',
+ 'SA3',
+ 'SA4',
+ 'SA5',
+ 'SA6',
+ 'SA7',
+ 'SA8',
+ 'SA9',
+ 'SA10',
+ 'SA11',
+ 'SA12',
+ 'SA13',
+ 'SA14',
+ 'SBA0',
+ 'SBA1',
+ 'SBA2',
+ 'SWE',
+ 'SCAS',
+ 'SRAS',
+ 'SCS0',
+ 'SCS1',
+ 'SZQ',
+ 'SRST',
+ 'SDBG0',
+ 'SDBG1',
+ 'ADBG',
+ 'ODT0',
+ 'ODT1'],
+ 'CTRL_SYS': [
+ 'TEST',
+ 'JTAG_SEL',
+ 'UBOOT_SEL',
+ 'NMI#',
+ 'RESET#',
+ 'CLK24M_IN',
+ 'CLK24M_OUT',
+ 'PLLTEST',
+ 'PLLREGIO',
+ 'PLLVP25',
+ 'PLLDV',
+ 'PLLVREG',
+ 'PLLGND',
],
-
- 'CTRL_SYS':
- [
- 'TEST', 'JTAG_SEL', 'UBOOT_SEL',
- 'NMI#', 'RESET#',
- 'CLK24M_IN', 'CLK24M_OUT',
- 'PLLTEST', 'PLLREGIO', 'PLLVP25',
- 'PLLDV', 'PLLVREG', 'PLLGND',
- ],
-
- 'POWER_DRAM':
- ['VCC0_DRAM', 'VCC1_DRAM', 'VCC2_DRAM', 'VCC3_DRAM', 'VCC4_DRAM',
- 'VCC5_DRAM', 'VCC6_DRAM', 'VCC7_DRAM', 'VCC8_DRAM', 'VCC9_DRAM',
- 'GND0_DRAM', 'GND1_DRAM', 'GND2_DRAM', 'GND3_DRAM', 'GND4_DRAM',
- 'GND5_DRAM', 'GND6_DRAM', 'GND7_DRAM', 'GND8_DRAM', 'GND9_DRAM',
+ 'POWER_DRAM': [
+ 'VCC0_DRAM',
+ 'VCC1_DRAM',
+ 'VCC2_DRAM',
+ 'VCC3_DRAM',
+ 'VCC4_DRAM',
+ 'VCC5_DRAM',
+ 'VCC6_DRAM',
+ 'VCC7_DRAM',
+ 'VCC8_DRAM',
+ 'VCC9_DRAM',
+ 'GND0_DRAM',
+ 'GND1_DRAM',
+ 'GND2_DRAM',
+ 'GND3_DRAM',
+ 'GND4_DRAM',
+ 'GND5_DRAM',
+ 'GND6_DRAM',
+ 'GND7_DRAM',
+ 'GND8_DRAM',
+ 'GND9_DRAM',
],
-
- 'POWER_CPU':
- ['VDD0_CPU', 'VDD1_CPU', 'VDD2_CPU', 'VDD3_CPU', 'VDD4_CPU', 'VDD5_CPU',
- 'GND0_CPU', 'GND1_CPU', 'GND2_CPU', 'GND3_CPU', 'GND4_CPU', 'GND5_CPU',
+ 'POWER_CPU': [
+ 'VDD0_CPU',
+ 'VDD1_CPU',
+ 'VDD2_CPU',
+ 'VDD3_CPU',
+ 'VDD4_CPU',
+ 'VDD5_CPU',
+ 'GND0_CPU',
+ 'GND1_CPU',
+ 'GND2_CPU',
+ 'GND3_CPU',
+ 'GND4_CPU',
+ 'GND5_CPU',
],
-
- 'POWER_DLL':
- ['VDD0_DLL', 'VDD1_DLL', 'VDD2_DLL',
- 'GND0_DLL', 'GND1_DLL', 'GND2_DLL',
+ 'POWER_DLL': [
+ 'VDD0_DLL',
+ 'VDD1_DLL',
+ 'VDD2_DLL',
+ 'GND0_DLL',
+ 'GND1_DLL',
+ 'GND2_DLL',
],
-
- 'POWER_INT':
- ['VDD0_INT', 'VDD1_INT', 'VDD2_INT', 'VDD3_INT', 'VDD4_INT',
- 'VDD5_INT', 'VDD6_INT', 'VDD7_INT', 'VDD8_INT', 'VDD9_INT',
- 'GND0_INT', 'GND1_INT', 'GND2_INT', 'GND3_INT', 'GND4_INT',
- 'GND5_INT', 'GND6_INT', 'GND7_INT', 'GND8_INT', 'GND9_INT',
+ 'POWER_INT': [
+ 'VDD0_INT',
+ 'VDD1_INT',
+ 'VDD2_INT',
+ 'VDD3_INT',
+ 'VDD4_INT',
+ 'VDD5_INT',
+ 'VDD6_INT',
+ 'VDD7_INT',
+ 'VDD8_INT',
+ 'VDD9_INT',
+ 'GND0_INT',
+ 'GND1_INT',
+ 'GND2_INT',
+ 'GND3_INT',
+ 'GND4_INT',
+ 'GND5_INT',
+ 'GND6_INT',
+ 'GND7_INT',
+ 'GND8_INT',
+ 'GND9_INT',
],
-
- 'POWER_GPIO':
- ['VDD_GPIOA', 'VDD_GPIOB', 'VDD_GPIOC',
- 'VDD_GPIOD', 'VDD_GPIOE', 'VDD_GPIOF',
- 'VDD_GPIOG',
- 'GND_GPIOA', 'GND_GPIOB', 'GND_GPIOC',
- 'GND_GPIOD', 'GND_GPIOE', 'GND_GPIOF',
- 'GND_GPIOG',
- ]
-
- }
-
- display_fixed(fixedpins, len(pinouts))
+ 'POWER_GPIO': [
+ 'VDD_GPIOA',
+ 'VDD_GPIOB',
+ 'VDD_GPIOC',
+ 'VDD_GPIOD',
+ 'VDD_GPIOE',
+ 'VDD_GPIOF',
+ 'VDD_GPIOG',
+ 'GND_GPIOA',
+ 'GND_GPIOB',
+ 'GND_GPIOC',
+ 'GND_GPIOD',
+ 'GND_GPIOE',
+ 'GND_GPIOF',
+ 'GND_GPIOG',
+ ]}
+
+ fixedpins = display_fixed(fixedpins, len(pinouts))
print "# Functions (PinMux)"
print
'ULPI1': 'ULPI (USB Low Pin-count) 1',
'ULPI2': 'ULPI (USB Low Pin-count) 2',
'ULPI3': 'ULPI (USB Low Pin-count) 3',
- }
-
+ }
+
fns = display_fns(bankspec, pinouts, function_names)
print
# of spare GPIO.
eoma68 = ['B1:LCD/22', 'ULPI1/8', 'ULPI2', 'MMC', 'SD1', 'UART3',
- 'TWI3', 'SPI2', 'E2:SD2',]
+ 'TWI3', 'SPI2', 'E2:SD2', ]
eoma68_eint = ['EINT_16', 'EINT_17', 'EINT_18', 'EINT_19']
eoma68_pwm = ['D1:PWM_2']
descriptions = {
- 'MMC': 'internal (on Card)',
- 'SD1': 'user-facing: internal (on Card), multiplexed with JTAG1\n'
- 'and UART2, for debug purposes',
- 'TWI3': 'EOMA68-compliance: must be entirely free of devices.\n'
- 'Address 0x51 used (externally) for EOMA68 EEPROM Id',
- 'E2:SD2': 'EOMA68-compliance',
- 'SPI2': 'EOMA68-compliance',
- 'UART3': 'EOMA68-compliance',
- 'B1:LCD/22': 'EOMA68-compliance, 18-bit RGB/TTL LCD',
- 'ULPI1/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY',
- 'ULPI2': 'EOMA68-compliance: dual USB2 Host ULPI PHY'
+ 'MMC': 'internal (on Card)',
+ 'SD1': 'user-facing: internal (on Card), multiplexed with JTAG1\n'
+ 'and UART2, for debug purposes',
+ 'TWI3': 'EOMA68-compliance: must be entirely free of devices.\n'
+ 'Address 0x51 used (externally) for EOMA68 EEPROM Id',
+ 'E2:SD2': 'EOMA68-compliance',
+ 'SPI2': 'EOMA68-compliance',
+ 'UART3': 'EOMA68-compliance',
+ 'B1:LCD/22': 'EOMA68-compliance, 18-bit RGB/TTL LCD',
+ 'ULPI1/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY',
+ 'ULPI2': 'EOMA68-compliance: dual USB2 Host ULPI PHY'
}
unused_pins = check_functions("EOMA68", bankspec, fns, pinouts,
- eoma68, eoma68_eint, eoma68_pwm,
- descriptions)
+ eoma68, eoma68_eint, eoma68_pwm,
+ descriptions)
# Industrial scenario. not totally complete (some GPIO needed for PMIC)
# One interface to be connected to the MCU to give RTC, boot/dbg,
# QSPI could be used in 1-bit (MOSI/MISO) mode (freeing up 2 more).
industrial = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'B2:SD1',
- 'JTAG1', 'A3:UART2', 'E2:UART1', 'C3:UART0',
- 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD3']
+ 'MMC', 'B2:SD1',
+ 'JTAG1', 'A3:UART2', 'E2:UART1', 'C3:UART0',
+ 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD3']
industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2']
industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27',
'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23']
unused_pins = check_functions("Industrial", bankspec, fns, pinouts,
- industrial, industrial_eint, industrial_pwm)
+ industrial, industrial_eint, industrial_pwm)
# Industrial scenario, using an SPI-based LCD instead of RGB/TTL
# not totally complete (some GPIO needed for PMIC)
# also possibility of freeing up FlexBus CS# with a little reorg.
industrial = ['D1:FB/17', 'E1:FB/8', 'B2:SPI1', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'B2:SD1',
- 'JTAG1',
- 'A3:UART2', 'E2:UART1', 'C3:UART0', 'B2:UART4', 'B2:UART3',
- 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD3']
+ 'MMC', 'B2:SD1',
+ 'JTAG1',
+ 'A3:UART2', 'E2:UART1', 'C3:UART0', 'B2:UART4', 'B2:UART3',
+ 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD3']
industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2']
industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27',
'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23']
ind_descriptions = {
- 'B2:SPI1': 'Used for 320x240 or 640x480 etc. SPI-based LCD.\n'
- 'Frees up large numbers of GPIO from RGB/TTL bank'
+ 'B2:SPI1': 'Used for 320x240 or 640x480 etc. SPI-based LCD.\n'
+ 'Frees up large numbers of GPIO from RGB/TTL bank'
}
unused_pins = check_functions("Industrial with SPI-LCD",
- bankspec, fns, pinouts,
- industrial, industrial_eint, industrial_pwm,
- ind_descriptions)
+ bankspec, fns, pinouts,
+ industrial, industrial_eint, industrial_pwm,
+ ind_descriptions)
# Smartphone / Tablet - basically the same thing
tablet = ['B1:LCD/22', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'SD1',
- 'F1:IIS', # I2C Audio
- 'TWI2', # I2C Audio
- 'E2:UART1', # WIFI/BT
- 'E2:SD2', # WIFI
- 'C3:UART0', # GPS
- 'D2:UART3',
- 'D2:UART4',
+ 'MMC', 'SD1',
+ 'F1:IIS', # I2C Audio
+ 'TWI2', # I2C Audio
+ 'E2:UART1', # WIFI/BT
+ 'E2:SD2', # WIFI
+ 'C3:UART0', # GPS
+ 'D2:UART3',
+ 'D2:UART4',
'D3:TWI1', 'D2:TWI3', 'SPI2', 'QSPI']
- tablet_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
+ tablet_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
'F2:PWM_1', 'D1:PWM_2']
- tablet_eint = ['EINT_24', # BT_HOST_WAKE
- 'EINT_25', # WIFI_HOST_WAKE
- 'EINT_26', # CTP_INT
- 'EINT_27', # GSENSOR_INT
- 'EINT_8', # GPS_INT
- 'EINT_7', # TILT_SENSOR_INT
- 'EINT_22', # COMPASS_INT
- 'EINT_23', # MCU_INT
- 'EINT_16', # PMIC_INT
- 'EINT_17', # PWR_BUTTON_INT
- 'EINT_30', # OTG_ID
- 'EINT_31',
- ]
+ tablet_eint = ['EINT_24', # BT_HOST_WAKE
+ 'EINT_25', # WIFI_HOST_WAKE
+ 'EINT_26', # CTP_INT
+ 'EINT_27', # GSENSOR_INT
+ 'EINT_8', # GPS_INT
+ 'EINT_7', # TILT_SENSOR_INT
+ 'EINT_22', # COMPASS_INT
+ 'EINT_23', # MCU_INT
+ 'EINT_16', # PMIC_INT
+ 'EINT_17', # PWR_BUTTON_INT
+ 'EINT_30', # OTG_ID
+ 'EINT_31',
+ ]
descriptions = {
'B1:LCD/22':
- 'RGB/TTL LCD, 800x480 or use SN75LVDS83b for up to 1440x900',
+ 'RGB/TTL LCD, 800x480 or use SN75LVDS83b for up to 1440x900',
'MMC': 'eMMC: main internal storage',
'ULPI1/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
'as well as USB Host or USB Device',
'ULPI2/8': 'USB2 Host, connect to ULPI PHY w/and 4-port USB2 Hub\n'
- 'for example GL850G or FE1.1. '
- 'Connects to 2/3/4G/LTE Modem, 2x USB-Camera (VC0345)',
+ 'for example GL850G or FE1.1. '
+ 'Connects to 2/3/4G/LTE Modem, 2x USB-Camera (VC0345)',
'SD1': 'internal, multiplexed with JTAG1\n'
'and UART2, for debug purposes',
'F1:IIS': 'I2C Audio, connect to AC97 Audio IC',
'EINT_31': 'Spare?',
}
unused_pins = check_functions("Smartphone / Tablet",
- bankspec, fns, pinouts,
- tablet, tablet_eint, tablet_pwm,
- descriptions)
+ bankspec, fns, pinouts,
+ tablet, tablet_eint, tablet_pwm,
+ descriptions)
# Laptop
laptop = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'SD1',
- 'F1:IIS', # I2C Audio
- 'TWI2', # I2C Audio
- 'E2:UART1', # WIFI/BT
- 'E2:SD3', # WIFI
+ 'MMC', 'SD1',
+ 'F1:IIS', # I2C Audio
+ 'TWI2', # I2C Audio
+ 'E2:UART1', # WIFI/BT
+ 'E2:SD3', # WIFI
'D2:TWI3', 'QSPI']
- laptop_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
- ]
- laptop_eint = ['EINT_20', # BT_HOST_WAKE
- 'EINT_21', # WIFI_HOST_WAKE
- 'EINT_9', # MCU_INT
- 'EINT_31', # PMIC_INT
- ]
+ laptop_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
+ ]
+ laptop_eint = ['EINT_20', # BT_HOST_WAKE
+ 'EINT_21', # WIFI_HOST_WAKE
+ 'EINT_9', # MCU_INT
+ 'EINT_31', # PMIC_INT
+ ]
descriptions = {
'D1:FB/17': 'FlexBus. Connect to DM9000 or AX99896A MCU-style Bus\n'
- '10/100 Ethernet PHY.',
+ '10/100 Ethernet PHY.',
'E1:FB/8': 'FlexBus bus bits 8-15, needed to make a 16-bit bus width',
- 'B1:LCD/22':
- 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SSD2828 for MIPI,\n'
- 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
- 'display output (eDP/LVDS and HDMI/VGA) '
- 'conversion.',
+ 'B1:LCD/22': 'RGB/TTL LCD, use SN75LVDS83b for '
+ 'LVDS or SSD2828 for MIPI,\n'
+ 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
+ 'display output (eDP/LVDS and HDMI/VGA) '
+ 'conversion.',
'MMC': 'eMMC: main internal storage',
'ULPI1/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
- 'as well as USB Host or USB Device',
+ 'as well as USB Host or USB Device',
'ULPI2/8': 'USB2 Host, connect to ULPI PHY w/and 4-port USB2 Hub\n'
- 'for example GL850G or FE1.1. '
- 'Connects to USB-Camera (VC0345 and 3x external USB Ports)',
+ 'for example GL850G or FE1.1. '
+ 'Connects to USB-Camera (VC0345 and 3x external USB Ports)',
'SD1': 'internal, multiplexed with JTAG1\n'
- 'and UART2, for debug purposes',
+ 'and UART2, for debug purposes',
'F1:IIS': 'I2C Audio, connect to AC97 Audio IC',
'TWI2': 'Connect to AC97 Audio IC',
'E2:UART1': 'Connect to BT on AP6234/AP6335',
'E2:SD3': 'Connect to WIFI on AP6234/AP6335',
'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n'
- 'Only actually needs MISO/MOSI, bootstrap loader v. small\n'
- 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.\n'
- 'MCU implements keyboard-matrix for keyboard (also trackpad?)',
+ 'Only actually needs MISO/MOSI, bootstrap loader v. small\n'
+ 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.\n'
+ 'MCU implements keyboard-matrix for keyboard (also trackpad?)',
'D2:TWI3': 'Connect to PMIC',
'GPIO': 'Plenty of spare GPIO pins for miscellaneous functions\n'
- 'MCU EINT-capable GPIO may be used to generate extra EINTs\n'
- 'on the single MCU_INT line, if really needed',
+ 'MCU EINT-capable GPIO may be used to generate extra EINTs\n'
+ 'on the single MCU_INT line, if really needed',
'F2:PWM_0': 'LCD Backlight',
'EINT_20': 'BT_HOST_WAKE',
'EINT_21': 'WIFI_HOST_WAKE',
'EINT_31': 'PMIC_INT',
}
unused_pins = check_functions("Laptop / Netbook",
- bankspec, fns, pinouts,
- laptop, laptop_eint, laptop_pwm,
- descriptions)
+ bankspec, fns, pinouts,
+ laptop, laptop_eint, laptop_pwm,
+ descriptions)
# IoT
iot = ['B1:LCD', 'ULPI2/8', 'ULPI1/8',
- 'MMC', 'SD1',
- 'F1:IIS', # I2C Audio
- #'TWI2', # I2C Audio
- 'C3:UART0', # HSPA UART
- 'E2:UART1', # BT UART
- 'C2:SPI2', # HSPI SPI
- 'E2:SD3', # WIFI
- 'D3:TWI1', # sensors CTP,
- 'D2:TWI3', 'QSPI']
- iot_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
- ]
- iot_eint = [ 'EINT_5', # 'HSPA_MST_RDY',
- 'EINT_6', # 'HSPA_SL_RDY',
- 'EINT_7', # 'HSPA_RING',
- 'EINT_8', # 'WL_PMU_EN',
- 'EINT_9', # HSPA_GPIO1
- 'EINT_10', # IR_DT
- 'EINT_11', # 'BT_PCM_CLK',
- 'EINT_12', # 'BT_PCM_DIN',
- 'EINT_13', # 'BT_PCM_SYNC',
- 'EINT_14', # 'BT_PCM_DOUT',
- 'EINT_16', # 'USB_DRVVBUS',
- 'EINT_17', # 'USB_VBUSDET',
- 'EINT_21', # 'USB_ID',
- 'EINT_30', # 'CTP_INT',
- 'EINT_31', # 'SD_DET#',
+ 'MMC', 'SD1',
+ 'F1:IIS', # I2C Audio
+ #'TWI2', # I2C Audio
+ 'C3:UART0', # HSPA UART
+ 'E2:UART1', # BT UART
+ 'C2:SPI2', # HSPI SPI
+ 'E2:SD3', # WIFI
+ 'D3:TWI1', # sensors CTP,
+ 'D2:TWI3', 'QSPI']
+ iot_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
+ ]
+ iot_eint = ['EINT_5', # 'HSPA_MST_RDY',
+ 'EINT_6', # 'HSPA_SL_RDY',
+ 'EINT_7', # 'HSPA_RING',
+ 'EINT_8', # 'WL_PMU_EN',
+ 'EINT_9', # HSPA_GPIO1
+ 'EINT_10', # IR_DT
+ 'EINT_11', # 'BT_PCM_CLK',
+ 'EINT_12', # 'BT_PCM_DIN',
+ 'EINT_13', # 'BT_PCM_SYNC',
+ 'EINT_14', # 'BT_PCM_DOUT',
+ 'EINT_16', # 'USB_DRVVBUS',
+ 'EINT_17', # 'USB_VBUSDET',
+ 'EINT_21', # 'USB_ID',
+ 'EINT_30', # 'CTP_INT',
+ 'EINT_31', # 'SD_DET#',
]
descriptions = {
'B1:LCD':
- 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SSD2828 for MIPI,\n'
- 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
- 'display output (eDP/LVDS and HDMI/VGA) '
- 'conversion.',
+ 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SSD2828 for MIPI,\n'
+ 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
+ 'display output (eDP/LVDS and HDMI/VGA) '
+ 'conversion.',
'MMC': 'eMMC: main internal storage',
'F1:IIS': 'I2C Audio, connect to AC97 Audio IC',
'ULPI2/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
'MCU EINT-capable GPIO may be used to generate extra EINTs\n'
'on the single MCU_INT line, if really needed',
'F2:PWM_0': 'LCD Backlight',
- 'GPIOD4': 'WL_WAKE_AP',
- 'GPIOD5': 'BT_WAKE_AP',
- 'GPIOD6': 'AP_WAKE_BT',
- 'GPIOD7': 'AP_CK32KO',
- 'GPIOD8': 'HSPA_PWRON',
- 'GPIOD9': 'BT_RST_N',
- 'GPIOE5': 'HSPA_ON_OFF',
- 'GPIOD2': 'HSPA_SHUTDOWN',
- 'GPIOD3': 'CTP_RST',
- 'GPIOD12': 'LCD_RDN',
- 'GPIOD17': 'LCD_WRN',
- 'GPIOD18': 'LCD_RS',
- 'GPIOD21': 'LCD_CSN',
+ 'GPIOD_D4': 'WL_WAKE_AP',
+ 'GPIOD_D5': 'BT_WAKE_AP',
+ 'GPIOD_D6': 'AP_WAKE_BT',
+ 'GPIOD_D7': 'AP_CK32KO',
+ 'GPIOD_D8': 'HSPA_PWRON',
+ 'GPIOD_D9': 'BT_RST_N',
+ 'GPIOE_E5': 'HSPA_ON_OFF',
+ 'GPIOD_D2': 'HSPA_SHUTDOWN',
+ 'GPIOD_D3': 'CTP_RST',
+ 'GPIOD_D12': 'LCD_RDN',
+ 'GPIOD_D17': 'LCD_WRN',
+ 'GPIOD_D18': 'LCD_RS',
+ 'GPIOD_D21': 'LCD_CSN',
'EINT_5': 'HSPA_MST_RDY',
'EINT_6': 'HSPA_SL_RDY',
'EINT_31': 'SD_DETN',
}
unused_pins = check_functions("IoT",
- bankspec, fns, pinouts,
- iot, iot_eint, iot_pwm,
- descriptions)
+ bankspec, fns, pinouts,
+ iot, iot_eint, iot_pwm,
+ descriptions)
print "# Reference Datasheets"
print
projects / pinmux.git / blobdiff