DRAM_INIT_SIZE : integer;
HAS_SPI_FLASH : boolean;
SPI_FLASH_OFFSET : integer;
- HAS_LITEETH : boolean
+ HAS_LITEETH : boolean;
+ UART0_IS_16550 : boolean;
+ HAS_UART1 : boolean
);
port (
clk : in std_ulogic;
architecture behaviour of syscon is
-- Register address bits
- constant SYS_REG_BITS : positive := 3;
+ constant SYS_REG_BITS : positive := 6;
-- Register addresses (matches wishbone addr downto 3, ie, 8 bytes per reg)
- constant SYS_REG_SIG : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000";
- constant SYS_REG_INFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "001";
- constant SYS_REG_BRAMINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "010";
- constant SYS_REG_DRAMINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "011";
- constant SYS_REG_CLKINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "100";
- constant SYS_REG_CTRL : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "101";
- constant SYS_REG_DRAMINITINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "110";
- constant SYS_REG_SPIFLASHINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "111";
+ constant SYS_REG_SIG : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000000";
+ constant SYS_REG_INFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000001";
+ constant SYS_REG_BRAMINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000010";
+ constant SYS_REG_DRAMINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000011";
+ constant SYS_REG_CLKINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000100";
+ constant SYS_REG_CTRL : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000101";
+ constant SYS_REG_DRAMINITINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000110";
+ constant SYS_REG_SPIFLASHINFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "000111";
+ constant SYS_REG_UART0_INFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "001000";
+ constant SYS_REG_UART1_INFO : std_ulogic_vector(SYS_REG_BITS-1 downto 0) := "001001";
-- Muxed reg read signal
signal reg_out : std_ulogic_vector(63 downto 0);
-- INFO register bits
- constant SYS_REG_INFO_HAS_UART : integer := 0;
- constant SYS_REG_INFO_HAS_DRAM : integer := 1;
- constant SYS_REG_INFO_HAS_BRAM : integer := 2;
- constant SYS_REG_INFO_HAS_SPIF : integer := 3;
- constant SYS_REG_INFO_HAS_LETH : integer := 4;
+ constant SYS_REG_INFO_HAS_UART : integer := 0; -- Has a UART (always set)
+ constant SYS_REG_INFO_HAS_DRAM : integer := 1; -- Has DRAM
+ constant SYS_REG_INFO_HAS_BRAM : integer := 2; -- Has "main" BRAM
+ constant SYS_REG_INFO_HAS_SPIF : integer := 3; -- Has SPI flash
+ constant SYS_REG_INFO_HAS_LETH : integer := 4; -- Has LiteEth ethernet
+ constant SYS_REG_INFO_HAS_LSYS : integer := 5; -- Has 6-bit address syscon
+ constant SYS_REG_INFO_HAS_URT1 : integer := 6; -- Has second UART
+ constant SYS_REG_INFO_HAS_ARTB : integer := 7; -- Has architected TB frequency
-- BRAMINFO contains the BRAM size in the bottom 52 bits
-- DRAMINFO contains the DRAM size if any in the bottom 52 bits
-- reserved for the FPGA bitfile if any
constant SYS_REG_SPI_INFO_IS_FLASH : integer := 0;
+ -- UART0/1 info registers bits
+ --
+ -- 0 ..31 : UART clock freq (in HZ)
+ -- 32 : UART is 16550 (otherwise pp)
+ --
+
-- Ctrl register
signal reg_ctrl : std_ulogic_vector(SYS_REG_CTRL_BITS-1 downto 0);
signal reg_ctrl_out : std_ulogic_vector(63 downto 0);
signal reg_dramiinfo : std_ulogic_vector(63 downto 0);
signal reg_clkinfo : std_ulogic_vector(63 downto 0);
signal reg_spiinfo : std_ulogic_vector(63 downto 0);
+ signal reg_uart0info : std_ulogic_vector(63 downto 0);
+ signal reg_uart1info : std_ulogic_vector(63 downto 0);
signal info_has_dram : std_ulogic;
signal info_has_bram : std_ulogic;
signal info_has_uart : std_ulogic;
signal info_has_spif : std_ulogic;
signal info_has_leth : std_ulogic;
+ signal info_has_urt1 : std_ulogic;
signal info_clk : std_ulogic_vector(39 downto 0);
signal info_fl_off : std_ulogic_vector(31 downto 0);
+ signal uinfo_16550 : std_ulogic;
+ signal uinfo_freq : std_ulogic_vector(31 downto 0);
-- Wishbone response latch
signal wb_rsp : wb_io_slave_out;
info_has_bram <= '1' when BRAM_SIZE /= 0 else '0';
info_has_spif <= '1' when HAS_SPI_FLASH else '0';
info_has_leth <= '1' when HAS_LITEETH else '0';
+ info_has_urt1 <= '1' when HAS_UART1 else '0';
info_clk <= std_ulogic_vector(to_unsigned(CLK_FREQ, 40));
reg_info <= (SYS_REG_INFO_HAS_UART => info_has_uart,
SYS_REG_INFO_HAS_DRAM => info_has_dram,
SYS_REG_INFO_HAS_BRAM => info_has_bram,
SYS_REG_INFO_HAS_SPIF => info_has_spif,
SYS_REG_INFO_HAS_LETH => info_has_leth,
+ SYS_REG_INFO_HAS_LSYS => '1',
+ SYS_REG_INFO_HAS_URT1 => info_has_urt1,
others => '0');
reg_braminfo <= x"000" & std_ulogic_vector(to_unsigned(BRAM_SIZE, 52));
reg_ctrl_out <= (63 downto SYS_REG_CTRL_BITS => '0',
SYS_REG_CTRL_BITS-1 downto 0 => reg_ctrl);
+ -- UART info registers read composition
+ uinfo_16550 <= '1' when UART0_IS_16550 else '0';
+ uinfo_freq <= std_ulogic_vector(to_unsigned(CLK_FREQ, 32));
+ reg_uart0info <= (32 => uinfo_16550,
+ 31 downto 0 => uinfo_freq,
+ others => '0');
+ reg_uart1info <= (32 => '1',
+ 31 downto 0 => uinfo_freq,
+ others => '0');
+
-- Wishbone response
wb_rsp.ack <= wishbone_in.cyc and wishbone_in.stb;
with wishbone_in.adr(SYS_REG_BITS+2 downto 3) select reg_out <=
reg_clkinfo when SYS_REG_CLKINFO,
reg_ctrl_out when SYS_REG_CTRL,
reg_spiinfo when SYS_REG_SPIFLASHINFO,
+ reg_uart0info when SYS_REG_UART0_INFO,
+ reg_uart1info when SYS_REG_UART1_INFO,
(others => '0') when others;
wb_rsp.dat <= reg_out(63 downto 32) when wishbone_in.adr(2) = '1' else
reg_out(31 downto 0);
projects / microwatt.git / blobdiff