ps = PinSpec(pinbanks, fixedpins, function_names,
{'lcd': {'bus': 'fastbus',
ps = PinSpec(pinbanks, fixedpins, function_names,
{'lcd': {'bus': 'fastbus',
'jtag': {'bus': 'fastbus'},
'fb': {'bus': 'fastbus'},
'jtag': {'bus': 'fastbus'},
'fb': {'bus': 'fastbus'},
# Bank A, 0-15
ps.gpio("", ('A', 0), 0, 0, 16)
# Bank A, 0-15
ps.gpio("", ('A', 0), 0, 0, 16)
'for example GL850G or FE1.1. '
'Connects to 2/3/4G/LTE Modem, 2x USB-Camera (VC0345)',
'MMC0': 'internal, multiplexed with JTAG0\n'
'for example GL850G or FE1.1. '
'Connects to 2/3/4G/LTE Modem, 2x USB-Camera (VC0345)',
'MMC0': 'internal, multiplexed with JTAG0\n'
'F1:IIS': 'I2C Audio, connect to AC97 Audio IC',
'TWI1': 'Connect to AC97 Audio IC',
'E2:QUART1': 'Connect to BT on AP6234/AP6335',
'F1:IIS': 'I2C Audio, connect to AC97 Audio IC',
'TWI1': 'Connect to AC97 Audio IC',
'E2:QUART1': 'Connect to BT on AP6234/AP6335',
'as well as USB Host or USB Device',
'ULPI0/8': 'USB2 Host, connect to ULPI PHY',
'MMC0': 'internal, multiplexed with JTAG0\n'
'as well as USB Host or USB Device',
'ULPI0/8': 'USB2 Host, connect to ULPI PHY',
'MMC0': 'internal, multiplexed with JTAG0\n'
'C3:QUART0': 'Connect to HSPA UART',
'E2:QUART1': 'Connect to BT UART',
'E2:MMC2': 'Connect to WIFI',
'C3:QUART0': 'Connect to HSPA UART',
'E2:QUART1': 'Connect to BT UART',
'E2:MMC2': 'Connect to WIFI',