(no commit message)

diff --git a/openpower/sv/setvl.mdwn b/openpower/sv/setvl.mdwn
index 4acd6335d4d136a40993a1cc5d43d38f6474a912..b6cfd1f888b8f90700213cc604ae1f449c74bff4 100644 (file)
--- a/openpower/sv/setvl.mdwn
+++ b/openpower/sv/setvl.mdwn
@@ -109,7 +109,7 @@ Note that setmvli is a pseudo-op, based on RA/RT=0, and setvli likewise
     setvli VL=8    : setvl r5, r0, VL=8
     setmvli MVL=8  : setvl r0, r0, MVL=8
 
     setvli VL=8    : setvl r5, r0, VL=8
     setmvli MVL=8  : setvl r0, r0, MVL=8
 

-Additional pseudo-op for obtaining VL without modifying it:
+Additional pseudo-op for obtaining VL without modifying it (or any state):

 
     getvl r5       : setvl r5, r0, vf=0, vs=0, ms=0
 
 
     getvl r5       : setvl r5, r0, vf=0, vs=0, ms=0
 


@@ -120,7 +120,7 @@ of srcstep and dststep:
 
 Note that whilst it is possible to set both MVL and VL from the same
 immediate, it is not possible to set them to different immediates in
 
 Note that whilst it is possible to set both MVL and VL from the same
 immediate, it is not possible to set them to different immediates in

-the same instruction.  That would require two instructions.
+the same instruction.  Doing so would require two instructions.

 
 **Selecting sources for VL**
 
 
 **Selecting sources for VL**
 


@@ -155,7 +155,7 @@ by looping first through 0 to VL-1 and only then moving the PC
 to the next instruction, Vertical-First moves the PC onwards
 (vertically) through multiple instructions **with the same
 srcstep and dststep**, then an explict instruction used to
 to the next instruction, Vertical-First moves the PC onwards
 (vertically) through multiple instructions **with the same
 srcstep and dststep**, then an explict instruction used to

-advance srcstep/dststep, and an outer loop is expected to be
+advance srcstep/dststep. An outer loop is expected to be

 used (branch instruction) which completes a series of
 Vector operations.
 
 used (branch instruction) which completes a series of
 Vector operations.