from nmigen.cli import rtlil
import unittest
-from openpower.decoder.isa.caller import ISACaller, special_sprs
from openpower.decoder.power_decoder import (create_pdecode)
from openpower.decoder.power_decoder2 import (PowerDecode2)
-from openpower.decoder.power_enums import (XER_bits, Function)
-from openpower.decoder.selectable_int import SelectableInt
-from openpower.simulator.program import Program
+from openpower.decoder.power_enums import Function
from openpower.decoder.isa.all import ISA
from openpower.endian import bigendian
-from openpower.test.common import TestAccumulatorBase, TestCase, ALUHelpers
+from openpower.test.common import TestAccumulatorBase, ALUHelpers
from openpower.util import mask_extend
from soc.fu.cr.pipeline import CRBasePipe
from soc.fu.cr.pipe_data import CRPipeSpec
import random
+from openpower.test.cr.cr_cases import CRTestCase
-# This test bench is a bit different than is usual. Initially when I
-# was writing it, I had all of the tests call a function to create a
-# device under test and simulator, initialize the dut, run the
-# simulation for ~2 cycles, and assert that the dut output what it
-# should have. However, this was really slow, since it needed to
-# create and tear down the dut and simulator for every test case.
-
-# Now, instead of doing that, every test case in ALUTestCase puts some
-# data into the test_data list below, describing the instructions to
-# be tested and the initial state. Once all the tests have been run,
-# test_data gets passed to TestRunner which then sets up the DUT and
-# simulator once, runs all the data through it, and asserts that the
-# results match the pseudocode sim at every cycle.
-
-# By doing this, I've reduced the time it takes to run the test suite
-# massively. Before, it took around 1 minute on my computer, now it
-# takes around 3 seconds
-
-
-class CRTestCase(TestAccumulatorBase):
-
- def case_crop(self):
- insns = ["crand", "cror", "crnand", "crnor", "crxor", "creqv",
- "crandc", "crorc"]
- for i in range(40):
- choice = random.choice(insns)
- ba = random.randint(0, 31)
- bb = random.randint(0, 31)
- bt = random.randint(0, 31)
- lst = [f"{choice} {ba}, {bb}, {bt}"]
- cr = random.randint(0, (1 << 32)-1)
- self.add_case(Program(lst, bigendian), initial_cr=cr)
-
- def case_crand(self):
- for i in range(20):
- lst = ["crand 0, 11, 13"]
- cr = random.randint(0, (1 << 32)-1)
- self.add_case(Program(lst, bigendian), initial_cr=cr)
-
- def case_1_mcrf(self):
- for i in range(20):
- src = random.randint(0, 7)
- dst = random.randint(0, 7)
- lst = [f"mcrf {src}, {dst}"]
- cr = random.randint(0, (1 << 32)-1)
- self.add_case(Program(lst, bigendian), initial_cr=cr)
-
- def case_0_mcrf(self):
- for i in range(8):
- lst = [f"mcrf 5, {i}"]
- cr = 0xfeff0001
- self.add_case(Program(lst, bigendian), initial_cr=cr)
-
- def case_mtcrf(self):
- for i in range(1):
- mask = random.randint(0, 255)
- lst = [f"mtcrf {mask}, 2"]
- cr = random.randint(0, (1 << 32)-1)
- initial_regs = [0] * 32
- initial_regs[2] = random.randint(0, (1 << 32)-1)
- self.add_case(Program(lst, bigendian), initial_regs=initial_regs,
- initial_cr=cr)
-
- def case_mtocrf(self):
- for i in range(20):
- mask = 1 << random.randint(0, 7)
- lst = [f"mtocrf {mask}, 2"]
- cr = random.randint(0, (1 << 32)-1)
- initial_regs = [0] * 32
- initial_regs[2] = random.randint(0, (1 << 32)-1)
- self.add_case(Program(lst, bigendian), initial_regs=initial_regs,
- initial_cr=cr)
-
- def case_mfcr(self):
- for i in range(1):
- lst = ["mfcr 2"]
- cr = random.randint(0, (1 << 32)-1)
- self.add_case(Program(lst, bigendian), initial_cr=cr)
-
- def case_cror_regression(self):
- """another bad hack!
- """
- dis = ["cror 28, 5, 11"]
- lst = bytes([0x83, 0x5b, 0x75, 0x4f]) # 4f855b83
- cr = 0x35055058
- p = Program(lst, bigendian)
- p.assembly = '\n'.join(dis)+'\n'
- self.add_case(p, initial_cr=cr)
-
- def case_mfocrf_regression(self):
- """bit of a bad hack. comes from microwatt 1.bin instruction 0x106d0
- as the mask is non-standard, gnu-as barfs. so we fake it up directly
- from the binary
- """
- mask = 0b10000111
- dis = [f"mfocrf 2, {mask}"]
- lst = bytes([0x26, 0x78, 0xb8, 0x7c]) # 0x7cb87826
- cr = 0x5F9E080E
- p = Program(lst, bigendian)
- p.assembly = '\n'.join(dis)+'\n'
- self.add_case(p, initial_cr=cr)
-
- def case_mtocrf_regression(self):
- """microwatt 1.bin regression, same hack as above.
- 106b4: 21 d9 96 7d .long 0x7d96d921 # mtocrf 12, 0b01101101
- """
- mask = 0b01101101
- dis = [f"mtocrf 12, {mask}"]
- lst = bytes([0x21, 0xd9, 0x96, 0x7d]) # 0x7d96d921
- cr = 0x529e08fe
- initial_regs = [0] * 32
- initial_regs[12] = 0xffffffffffffffff
- p = Program(lst, bigendian)
- p.assembly = '\n'.join(dis)+'\n'
- self.add_case(p, initial_regs=initial_regs, initial_cr=cr)
-
- def case_mtocrf_regression_2(self):
- """microwatt 1.bin regression, zero fxm
- mtocrf 0,16 14928: 21 09 10 7e .long 0x7e100921
- """
- dis = ["mtocrf 16, 0"]
- lst = bytes([0x21, 0x09, 0x10, 0x7e]) # 0x7e100921
- cr = 0x3F089F7F
- initial_regs = [0] * 32
- initial_regs[16] = 0x0001C020
- p = Program(lst, bigendian)
- p.assembly = '\n'.join(dis)+'\n'
- self.add_case(p, initial_regs=initial_regs, initial_cr=cr)
-
- def case_mfocrf_1(self):
- lst = [f"mfocrf 2, 1"]
- cr = 0x1234
- self.add_case(Program(lst, bigendian), initial_cr=cr)
-
- def case_mfocrf(self):
- for i in range(1):
- mask = 1 << random.randint(0, 7)
- lst = [f"mfocrf 2, {mask}"]
- cr = random.randint(0, (1 << 32)-1)
- self.add_case(Program(lst, bigendian), initial_cr=cr)
-
- def case_isel_0(self):
- lst = [ "isel 4, 1, 2, 31"
- ]
- initial_regs = [0] * 32
- initial_regs[1] = 0x1004
- initial_regs[2] = 0x1008
- cr= 0x1ee
- self.add_case(Program(lst, bigendian),
- initial_regs=initial_regs, initial_cr=cr)
-
- def case_isel_1(self):
- lst = [ "isel 4, 1, 2, 30"
- ]
- initial_regs = [0] * 32
- initial_regs[1] = 0x1004
- initial_regs[2] = 0x1008
- cr= 0x1ee
- self.add_case(Program(lst, bigendian),
- initial_regs=initial_regs, initial_cr=cr)
-
- def case_isel_2(self):
- lst = [ "isel 4, 1, 2, 2"
- ]
- initial_regs = [0] * 32
- initial_regs[1] = 0x1004
- initial_regs[2] = 0x1008
- cr= 0x1ee
- self.add_case(Program(lst, bigendian),
- initial_regs=initial_regs, initial_cr=cr)
-
- def case_isel_3(self):
- lst = [ "isel 1, 2, 3, 13"
- ]
- initial_regs = [0] * 32
- initial_regs[2] = 0x1004
- initial_regs[3] = 0x1008
- cr= 0x5d677571b8229f1
- cr= 0x1b8229f1
- self.add_case(Program(lst, bigendian),
- initial_regs=initial_regs, initial_cr=cr)
-
- def case_isel(self):
- for i in range(20):
- bc = random.randint(0, 31)
- lst = [f"isel 1, 2, 3, {bc}"]
- cr = random.randint(0, (1 << 64)-1)
- initial_regs = [0] * 32
- #initial_regs[2] = random.randint(0, (1 << 64)-1)
- #initial_regs[3] = random.randint(0, (1 << 64)-1)
- initial_regs[2] = i*2+1
- initial_regs[3] = i*2+2
- self.add_case(Program(lst, bigendian),
- initial_regs=initial_regs, initial_cr=cr)
-
- def case_setb(self):
- for i in range(20):
- bfa = random.randint(0, 7)
- lst = [f"setb 1, {bfa}"]
- cr = random.randint(0, (1 << 32)-1)
- self.add_case(Program(lst, bigendian), initial_cr=cr)
-
- def case_regression_setb(self):
- lst = [f"setb 1, 6"]
- cr = random.randint(0, 0x66f6b106)
- self.add_case(Program(lst, bigendian), initial_cr=cr)
+
+class CRIlangCase(TestAccumulatorBase):
def case_ilang(self):
pspec = CRPipeSpec(id_wid=2)
unittest.main(exit=False)
suite = unittest.TestSuite()
suite.addTest(TestRunner(CRTestCase().test_data))
+ suite.addTest(TestRunner(CRIlangCase().test_data))
runner = unittest.TextTestRunner()
runner.run(suite)
projects / soc.git / commitdiff