kvm: Use the address finalization code in the TLB

Reuse the address finalization code in the TLB instead of replicating
it when handling MMIO. This patch also adds support for injecting
memory mapped IPR requests into the memory system.

diff --git a/src/cpu/kvm/base.cc b/src/cpu/kvm/base.cc
index 4c176c18b8e7fec52173879ad51a79bc17a215b1..1631fb54c67fff3196ccd58dabf7837e77eadf4f 100644 (file)
--- a/src/cpu/kvm/base.cc
+++ b/src/cpu/kvm/base.cc
@@ -46,6 +46,7 @@
 #include <csignal>
 #include <ostream>
 
+#include "arch/mmapped_ipr.hh"
 #include "arch/utility.hh"
 #include "cpu/kvm/base.hh"
 #include "debug/Checkpoint.hh"
@@ -949,12 +950,32 @@ BaseKvmCPU::handleKvmExitFailEntry()
 Tick
 BaseKvmCPU::doMMIOAccess(Addr paddr, void *data, int size, bool write)
 {
+    ThreadContext *tc(thread->getTC());
+    syncThreadContext();
+
     mmio_req.setPhys(paddr, size, Request::UNCACHEABLE, dataMasterId());
+    // Some architectures do need to massage physical addresses a bit
+    // before they are inserted into the memory system. This enables
+    // APIC accesses on x86 and m5ops where supported through a MMIO
+    // interface.
+    BaseTLB::Mode tlb_mode(write ? BaseTLB::Write : BaseTLB::Read);
+    Fault fault(tc->getDTBPtr()->finalizePhysical(&mmio_req, tc, tlb_mode));
+    if (fault != NoFault)
+        warn("Finalization of MMIO address failed: %s\n", fault->name());
+
 
     const MemCmd cmd(write ? MemCmd::WriteReq : MemCmd::ReadReq);
     Packet pkt(&mmio_req, cmd);
     pkt.dataStatic(data);
-    return dataPort.sendAtomic(&pkt);
+
+    if (mmio_req.isMmappedIpr()) {
+        if (write)
+            return TheISA::handleIprWrite(tc, &pkt);
+        else
+            return TheISA::handleIprRead(tc, &pkt);
+    } else {
+        return dataPort.sendAtomic(&pkt);
+    }
 }
 
 void

diff --git a/src/mem/request.hh b/src/mem/request.hh
index 11f1c74b3e404f48a4babfb62631f245c022a9fb..ac6e3550b828bc45c5ef35f308bcbf5c0f3c1bdb 100644 (file)
--- a/src/mem/request.hh
+++ b/src/mem/request.hh
@@ -321,15 +321,15 @@ class Request
     }
 
     /**
-     * Set just the physical address.  This should only be used to
-     * record the result of a translation, and thus the vaddr must be
-     * valid before this method is called.  Otherwise, use setPhys()
-     * to guarantee that the size and flags are also set.
+     * Set just the physical address.  This usually used to record the
+     * result of a translation. However, when using virtualized CPUs
+     * setPhys() is sometimes called to finalize a physical address
+     * without a virtual address, so we can't check if the virtual
+     * address is valid.
      */
     void
     setPaddr(Addr paddr)
     {
-        assert(privateFlags.isSet(VALID_VADDR));
         _paddr = paddr;
         privateFlags.set(VALID_PADDR);
     }