From: Daniel Benusovich Date: Fri, 23 Nov 2018 06:14:51 +0000 (-0800) Subject: Updating sv_add_elwidth to use SV_ELWIDTH_TEST macro from sv_test_macros X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=cffc14b48181a9ddbcc73b0a6e6b67d01f63e402;p=riscv-tests.git Updating sv_add_elwidth to use SV_ELWIDTH_TEST macro from sv_test_macros --- diff --git a/isa/macros/simplev/sv_test_macros.h b/isa/macros/simplev/sv_test_macros.h index 35a415c..9f16a84 100644 --- a/isa/macros/simplev/sv_test_macros.h +++ b/isa/macros/simplev/sv_test_macros.h @@ -116,7 +116,7 @@ load_instruction( x14, testdata+elwidth*2); \ load_instruction( x15, testdata+elwidth*3); \ load_instruction( x16, testdata+elwidth*4); \ - load_instruction( x17, testdata++elwidth*5); \ + load_instruction( x17, testdata+elwidth*5); \ // Loads the source registers using load_instruction from testdata with a spacing of elwidth and offset #define SV_LOAD_FORMAT_OFFSET(load_instruction, testdata, elwidth, offset) \ @@ -183,3 +183,4 @@ #define SV_W_8BIT 1 #define SV_W_16BIT 2 #define SV_W_32BIT 3 +#define SV_W_DEFAULT_EXPECT 0xa5a5a5a5a5a5a5a5 diff --git a/isa/rv64ui/sv_add_elwidth.S b/isa/rv64ui/sv_add_elwidth.S index 0ee22b6..6e627ff 100644 --- a/isa/rv64ui/sv_add_elwidth.S +++ b/isa/rv64ui/sv_add_elwidth.S @@ -3,34 +3,6 @@ RVTEST_RV64U # Define TVM used by program. -#define SV_ELWIDTH_TEST( wid1, wid2, wid3, expect1, expect2 ) \ - \ - SV_LDD_DATA( x4, testdata , 0); \ - SV_LDD_DATA( x5, testdata+8 , 0); \ - SV_LDD_DATA( x12, testdata+16, 0); \ - SV_LDD_DATA( x13, testdata+24, 0); \ - \ - li x14, 0; \ - li x15, 0; \ - \ - SET_SV_MVL( 2); \ - SET_SV_3CSRS( SV_REG_CSR( 1, 4, wid1, 4, 1), \ - SV_REG_CSR( 1, 12, wid2, 12, 1), \ - SV_REG_CSR( 1, 14, wid3, 14, 1)); \ - SET_SV_VL( 2); \ - \ - add x14, x4, x12; \ - \ - CLR_SV_CSRS(); \ - SET_SV_VL( 1); \ - SET_SV_MVL( 1); \ - \ - TEST_SV_IMM( x14, expect1 ); \ - TEST_SV_IMM( x15, expect2 ); \ - TEST_SV_IMM( x12, 0x0000005242322212); \ - TEST_SV_IMM( x13, 0x0000005141312111); - - # SV test: vector-vector add # # sets up x3 and x4 with data, sets VL to 2, and carries out @@ -40,9 +12,12 @@ RVTEST_RV64U # Define TVM used by program. RVTEST_CODE_BEGIN # Start of test code. # - SV_ELWIDTH_TEST( 0, 0, 0, 0x000000ab8b6b4b2b, 0x000000a888684828 ) - SV_ELWIDTH_TEST( 0, 0, 3, 0x886848288b6b4b2b, 0x0000000000000000 ) - SV_ELWIDTH_TEST( 1, 1, 0, 0x000000000000002b, 0x000000000000004b ) + SV_ELWIDTH_TEST( add, SV_LDD_DATA, testdata, 8, 0, 2, 0, 0, 0, 1, 1, 1, + 0x000000ab8b6b4b2b, 0x000000a888684828, SV_W_DEFAULT_EXPECT) + SV_ELWIDTH_TEST( add, SV_LDD_DATA, testdata, 8, 0, 2, 0, 0, 3, 1, 1, 1, + 0x886848288b6b4b2b, SV_W_DEFAULT_EXPECT, SV_W_DEFAULT_EXPECT) + SV_ELWIDTH_TEST( add, SV_LDD_DATA, testdata, 8, 0, 2, 1, 1, 0, 1, 1, 1, + 0x000000000000002b, 0x000000000000004b, SV_W_DEFAULT_EXPECT) RVTEST_PASS # Signal success. fail: @@ -56,8 +31,10 @@ RVTEST_CODE_END # End of test code. testdata: .dword 0x0000005949392919 .dword 0x0000005747372717 + .dword 0x0000000000000000 .dword 0x0000005242322212 .dword 0x0000005141312111 + .dword 0x0000000000000000 # Output data section. RVTEST_DATA_BEGIN # Start of test output data region.