#!/usr/bin/env python
-from UserDict import UserDict
-from interfaces import jtag, uart, ulpi, uartfull, rgbttl, rgmii
-from interfaces import flexbus1, flexbus2, sdram1, sdram2, mcu8080
-from interfaces import eint, pwm, gpio, spi, i2c, emmc, sdmmc
-from interfaces import quadspi, i2s
-from interfaces import display, display_fns, check_functions
-from interfaces import pinmerge, display_fixed
+from spec.base import PinSpec
-def pinspec():
- pinouts = UserDict()
-
- pinbanks = {'A': 16,
- 'B': 28,
- 'C': 24,
- 'D': 24,
- 'E': 24,
- 'F': 10,
- 'G': 32,
- }
- bankspec = {}
- pkeys = pinbanks.keys()
- pkeys.sort()
- offs = 0
- for kn in pkeys:
- bankspec[kn] = offs
- offs += pinbanks[kn]
-
- # Bank A, 0-15
- pinmerge(pinouts, gpio(bankspec, "", ('A', 0), "A", 0, 16, 0))
- pinmerge(pinouts, spi(bankspec, "1", ('A', 0), "A", 3))
- pinmerge(pinouts, uartfull(bankspec, "1", ('A', 0), "A", 2))
- pinmerge(pinouts, i2c(bankspec, "1", ('A', 4), "A", 2))
- pinmerge(pinouts, emmc(bankspec, "", ('A', 0), "A", 1))
- #pinmerge(pinouts, uart(bankspec, "2", ('A', 14), "A", 1))
- pinmerge(pinouts, spi(bankspec, "2", ('A', 6), "A", 2))
- pinmerge(pinouts, eint(bankspec, "", ('A', 10), "A", 0, 6))
- pinmerge(pinouts, eint(bankspec, "", ('A', 4), "A", 0, 6, mux=3))
- pinmerge(pinouts, sdmmc(bankspec, "1", ('A', 10), "A", 2))
- pinmerge(pinouts, jtag(bankspec, "1", ('A', 10), "A", 3))
- pinmerge(pinouts, uart(bankspec, "2", ('A', 14), "A", 3))
-
- # Bank B, 16-47
- pinmerge(pinouts, gpio(bankspec, "", ('B', 0), "B", 0, 28, 0))
- pinmerge(pinouts, rgbttl(bankspec, "0", ('B', 0), "B", 1))
- pinmerge(pinouts, spi(bankspec, "1", ('B', 12), "B", 2))
- pinmerge(pinouts, quadspi(bankspec, "0", ('B', 4), "B", 2, limit=4))
- pinmerge(pinouts, uart(bankspec, "3", ('B', 16), "B", 2))
- pinmerge(pinouts, i2c(bankspec, "3", ('B', 18), "B", 2))
- pinmerge(pinouts, pwm(bankspec, "0", ('B', 9), "B", mux=2))
- pinmerge(pinouts, pwm(bankspec, "1", ('B', 20), "B", mux=2))
- pinmerge(pinouts, pwm(bankspec, "2", ('B', 21), "B", mux=2))
- pinmerge(pinouts, sdmmc(bankspec, "1", ('B', 22), "B", 2))
- pinmerge(pinouts, eint(bankspec, "", ('B', 0), "B", 6, 4, mux=3))
- pinmerge(pinouts, flexbus2(bankspec, "0", ('B', 4), "B", 3))
- pinmerge(pinouts, i2c(bankspec, "1", ('B', 0), "B", 2))
- pinmerge(pinouts, uart(bankspec, "2", ('B', 2), "B", 2))
- pinmerge(pinouts, uart(bankspec, "4", ('B', 10), "B", 2))
-
- # Bank C, 48-71
- pinmerge(pinouts, gpio(bankspec, "", ("C", 0), "C", 0, 24, 0))
- pinmerge(pinouts, ulpi(bankspec, "1", ('C', 0), "C", 1))
- pinmerge(pinouts, ulpi(bankspec, "2", ('C', 12), "C", 1))
- pinmerge(pinouts, spi(bankspec, "2", ('C', 8), "C", 2))
- #pinmerge(pinouts, spi(bankspec, "2", ('C', 28), "C", 2))
- pinmerge(pinouts, uartfull(bankspec, "0", ('C', 20), "C", 3))
- pinmerge(pinouts, eint(bankspec, "", ('C', 0), "C", 10, 8, mux=3))
- pinmerge(pinouts, jtag(bankspec, "2", ('C', 8), "C", 3))
- pinmerge(pinouts, eint(bankspec, "", ('C', 12), "C", 22, 8, mux=3))
- pinmerge(pinouts, uart(bankspec, "2", ('C', 22), "C", 2))
- pinmerge(pinouts, i2s(bankspec, "", ('C', 13), "C", 2))
- pinmerge(pinouts, pwm(bankspec, "2", ('C', 21), "C", mux=2))
-
- # Bank D, 72-96
- flexspec = {
- 'FB_TS': ('FB_ALE', 2, "D"),
- 'FB_CS2': ('FB_BWE2', 2, "D"),
- 'FB_A0': ('FB_BWE2', 3, "D"),
- 'FB_CS3': ('FB_BWE3', 2, "D"),
- 'FB_A1': ('FB_BWE3', 3, "D"),
- 'FB_TBST': ('FB_OE', 2, "D"),
- 'FB_TSIZ0': ('FB_BWE0', 2, "D"),
- 'FB_TSIZ1': ('FB_BWE1', 2, "D"),
- }
- #pinmerge(pinouts, mcu8080("", 72, "D", 1))
- pinmerge(pinouts, gpio(bankspec, "", ('D', 0), "D", 0, 24, 0))
- pinmerge(pinouts, flexbus1(bankspec, "0", ('D', 0), "D", 1, spec=flexspec))
- pinmerge(pinouts, i2c(bankspec, "2", ('D', 17), "D", 2))
- pinmerge(pinouts, pwm(bankspec, "0", ('D', 21), "D", mux=1))
- pinmerge(pinouts, pwm(bankspec, "1", ('D', 22), "D", mux=1))
- pinmerge(pinouts, pwm(bankspec, "2", ('D', 23), "D", mux=1))
- pinmerge(pinouts, i2c(bankspec, "1", ('D', 10), "D", 3))
- pinmerge(pinouts, i2c(bankspec, "3", ('D', 19), "D", 2))
- pinmerge(pinouts, uartfull(bankspec, "0", ('D', 0), "D", 2))
- pinmerge(pinouts, uart(bankspec, "3", ('D', 21), "D", 2))
- pinmerge(pinouts, uart(bankspec, "4", ('D', 13), "D", 2))
- pinmerge(pinouts, eint(bankspec, "", ('D', 19), "D", 18, 4, mux=3))
- pinmerge(pinouts, eint(bankspec, "", ('D', 23), "D", 9, 1, mux=3))
- pinmerge(pinouts, eint(bankspec, "", ('D', 13), "D", 5, 4, mux=3))
- pinmerge(pinouts, eint(bankspec, "", ('D', 0), "D", 30, 2, mux=3))
- pinmerge(pinouts, i2c(bankspec, "2", ('D', 2), "D", 3))
- pinmerge(pinouts, sdmmc(bankspec, "2", ('D', 4), "D", 2))
-
- # Bank E
- pinmerge(pinouts, gpio(bankspec, "", ('E', 0), "E", 0, 24, 0))
- pinmerge(pinouts, flexbus2(bankspec, "0", ('E', 0), "E", 1))
- pinmerge(pinouts, sdmmc(bankspec, "2", ('E', 0), "E", 2))
- pinmerge(pinouts, sdmmc(bankspec, "3", ('E', 8), "E", 2))
- pinmerge(pinouts, quadspi(bankspec, "0", ('E', 18), "E", 2))
- pinmerge(pinouts, uartfull(bankspec, "1", ('E', 14), "E", 2))
- pinmerge(pinouts, i2c(bankspec, "2", ('E', 6), "E", 2))
- pinmerge(pinouts, eint(bankspec, "", ('E', 0), "E", 10, 8, mux=3))
- pinmerge(pinouts, eint(bankspec, "", ('E', 8), "E", 22, 6, mux=3))
- pinmerge(pinouts, emmc(bankspec, "", ('E', 14), "E", 3))
-
- # Bank F
- pinmerge(pinouts, gpio(bankspec, "", ('F', 0), "F", 0, 10, 0))
- pinmerge(pinouts, i2s(bankspec, "", ('F', 0), "F", 1))
- pinmerge(pinouts, i2c(bankspec, "1", ('F', 6), "F", 2))
- pinmerge(pinouts, pwm(bankspec, "0", ('F', 8), "F", mux=2))
- pinmerge(pinouts, pwm(bankspec, "1", ('F', 9), "F", mux=2))
- pinmerge(pinouts, uart(bankspec, "4", ('F', 8), "F", 1))
- pinmerge(pinouts, sdmmc(bankspec, "3", ('F', 0), "F", 2))
- pinmerge(pinouts, eint(bankspec, "", ('F', 0), "F", 18, 4, mux=3))
- pinmerge(pinouts, pwm(bankspec, "2", ('F', 4), "F", mux=3))
- pinmerge(pinouts, eint(bankspec, "", ('F', 5), "F", 7, 1, mux=3))
- pinmerge(pinouts, eint(bankspec, "", ('F', 6), "F", 28, 4, mux=3))
-
- # Bank G
- pinmerge(pinouts, gpio(bankspec, "", ('G', 0), "G", 0, 32, 0))
- pinmerge(pinouts, rgmii(bankspec, "", ('G', 0), "G", 1))
- pinmerge(pinouts, ulpi(bankspec, "3", ('G', 20), "G", 1))
- pinmerge(pinouts, rgbttl(bankspec, "1", ('G', 0), "G", 2))
- pinmerge(pinouts, quadspi(bankspec, "0", ('G', 26), "G", 3))
- pinmerge(pinouts, flexbus2(bankspec, "0", ('G', 0), "G", 3))
- mmc2 = sdmmc(bankspec, "2", ('G', 24), "G", 3, limit=2)
- pinmerge(pinouts, mmc2)
- mmc2 = sdmmc(bankspec, "2", ('G', 28), "G", 2, start=2)
- pinmerge(pinouts, mmc2)
-
- print "# Pinouts (PinMux)"
- print
- print "auto-generated by [[pinouts.py]]"
- print
- print "[[!toc ]]"
- print
- display(pinouts)
- print
-
- print "# Pinouts (Fixed function)"
- print
+def pinspec():
+ pinbanks = {'A': (16, 4),
+ 'B': (28, 4),
+ 'C': (24, 4),
+ 'D': (24, 4),
+ 'E': (24, 4),
+ 'F': (10, 4),
+ 'G': (32, 4),
+ }
fixedpins = {
- 'DDR3':
- ['SDQ0', 'SDQ1', 'SDQ2', 'SDQ3', 'SDQ4', 'SDQ5', 'SDQ6', 'SDQ7',
- 'SDQ8', 'SDQ9', 'SDQ10', 'SDQ11', 'SDQ12', 'SDQ13', 'SDQ14', 'SDQ15',
- 'SDQ16', 'SDQ17', 'SDQ18', 'SDQ19', 'SDQ20', 'SDQ21', 'SDQ22', 'SDQ23',
- 'SDQ24', 'SDQ25', 'SDQ26', 'SDQ27', 'SDQ28', 'SDQ29', 'SDQ30', 'SDQ31',
- 'SVREF0', 'SVREF1', 'SVREF2', 'SVREF3',
- 'SDQS0', 'SDQS0#', 'SDQS1', 'SDQS1#',
- 'SDQS2', 'SDQS2#', 'SDQS3', 'SDQS3#',
- 'SDQM0', 'SDQM1', 'SDQM2', 'SDQM3',
- 'SCK#', 'SCK', 'SCKE0', 'SCKE1',
- 'SA0', 'SA1', 'SA2', 'SA3', 'SA4', 'SA5', 'SA6', 'SA7',
- 'SA8', 'SA9', 'SA10', 'SA11', 'SA12', 'SA13', 'SA14',
- 'SBA0', 'SBA1', 'SBA2',
- 'SWE', 'SCAS', 'SRAS',
- 'SCS0', 'SCS1',
- 'SZQ', 'SRST',
- 'SDBG0', 'SDBG1', 'ADBG',
- 'ODT0', 'ODT1'
+ 'DDR3': [
+ 'SDQ0', 'SDQ1', 'SDQ2', 'SDQ3',
+ 'SDQ4', 'SDQ5', 'SDQ6', 'SDQ7',
+ 'SDQ8', 'SDQ9', 'SDQ10', 'SDQ11',
+ 'SDQ12', 'SDQ13', 'SDQ14', 'SDQ15',
+ 'SDQ16', 'SDQ17', 'SDQ18', 'SDQ19',
+ 'SDQ20', 'SDQ21', 'SDQ22', 'SDQ23',
+ 'SDQ24', 'SDQ25', 'SDQ26', 'SDQ27',
+ 'SDQ28', 'SDQ29', 'SDQ30', 'SDQ31',
+ 'SVREF0', 'SVREF1', 'SVREF2', 'SVREF3',
+ 'SDQS0', 'SDQS0#', 'SDQS1', 'SDQS1#',
+ 'SDQS2', 'SDQS2#', 'SDQS3', 'SDQS3#',
+ 'SDQM0', 'SDQM1', 'SDQM2', 'SDQM3',
+ 'SCK#', 'SCK', 'SCKE0', 'SCKE1',
+ 'SA0', 'SA1', 'SA2', 'SA3',
+ 'SA4', 'SA5', 'SA6', 'SA7',
+ 'SA8', 'SA9', 'SA10', 'SA11',
+ 'SA12', 'SA13', 'SA14',
+ 'SBA0', 'SBA1', 'SBA2',
+ 'SWE', 'SCAS', 'SRAS', 'SCS0',
+ 'SCS1', 'SZQ', 'SRST',
+ 'SDBG0', 'SDBG1', 'ADBG',
+ 'ODT0', 'ODT1'],
+ 'CTRL_SYS': [
+ 'TEST', 'JTAG_SEL', 'UBOOT_SEL',
+ 'NMI#', 'RESET#', 'CLK24M_IN', 'CLK24M_OUT',
+ 'PLLTEST', 'PLLREGIO', 'PLLVP25',
+ 'PLLDV', 'PLLVREG', 'PLLGND',
],
-
- 'CTRL_SYS':
- [
- 'TEST', 'JTAG_SEL', 'UBOOT_SEL',
- 'NMI#', 'RESET#',
- 'CLK24M_IN', 'CLK24M_OUT',
- 'PLLTEST', 'PLLREGIO', 'PLLVP25',
- 'PLLDV', 'PLLVREG', 'PLLGND',
- ],
-
- 'POWER_DRAM':
- ['VCC0_DRAM', 'VCC1_DRAM', 'VCC2_DRAM', 'VCC3_DRAM', 'VCC4_DRAM',
- 'VCC5_DRAM', 'VCC6_DRAM', 'VCC7_DRAM', 'VCC8_DRAM', 'VCC9_DRAM',
- 'GND0_DRAM', 'GND1_DRAM', 'GND2_DRAM', 'GND3_DRAM', 'GND4_DRAM',
- 'GND5_DRAM', 'GND6_DRAM', 'GND7_DRAM', 'GND8_DRAM', 'GND9_DRAM',
+ 'POWER_DRAM': [
+ 'VCC0_DRAM', 'VCC1_DRAM', 'VCC2_DRAM', 'VCC3_DRAM',
+ 'VCC4_DRAM', 'VCC5_DRAM', 'VCC6_DRAM', 'VCC7_DRAM',
+ 'VCC8_DRAM', 'VCC9_DRAM',
+ 'GND0_DRAM', 'GND1_DRAM', 'GND2_DRAM', 'GND3_DRAM',
+ 'GND4_DRAM', 'GND5_DRAM', 'GND6_DRAM', 'GND7_DRAM',
+ 'GND8_DRAM', 'GND9_DRAM',
],
-
- 'POWER_CPU':
- ['VDD0_CPU', 'VDD1_CPU', 'VDD2_CPU', 'VDD3_CPU', 'VDD4_CPU', 'VDD5_CPU',
- 'GND0_CPU', 'GND1_CPU', 'GND2_CPU', 'GND3_CPU', 'GND4_CPU', 'GND5_CPU',
+ 'POWER_CPU': [
+ 'VDD0_CPU', 'VDD1_CPU', 'VDD2_CPU',
+ 'VDD3_CPU', 'VDD4_CPU', 'VDD5_CPU',
+ 'GND0_CPU', 'GND1_CPU', 'GND2_CPU',
+ 'GND3_CPU', 'GND4_CPU', 'GND5_CPU',
],
-
- 'POWER_DLL':
- ['VDD0_DLL', 'VDD1_DLL', 'VDD2_DLL',
- 'GND0_DLL', 'GND1_DLL', 'GND2_DLL',
+ 'POWER_DLL': [
+ 'VDD0_DLL', 'VDD1_DLL', 'VDD2_DLL',
+ 'GND0_DLL', 'GND1_DLL', 'GND2_DLL',
],
-
- 'POWER_INT':
- ['VDD0_INT', 'VDD1_INT', 'VDD2_INT', 'VDD3_INT', 'VDD4_INT',
- 'VDD5_INT', 'VDD6_INT', 'VDD7_INT', 'VDD8_INT', 'VDD9_INT',
- 'GND0_INT', 'GND1_INT', 'GND2_INT', 'GND3_INT', 'GND4_INT',
- 'GND5_INT', 'GND6_INT', 'GND7_INT', 'GND8_INT', 'GND9_INT',
+ 'POWER_INT': [
+ 'VDD0_INT', 'VDD1_INT', 'VDD2_INT', 'VDD3_INT', 'VDD4_INT',
+ 'VDD5_INT', 'VDD6_INT', 'VDD7_INT', 'VDD8_INT', 'VDD9_INT',
+ 'GND0_INT', 'GND1_INT', 'GND2_INT', 'GND3_INT', 'GND4_INT',
+ 'GND5_INT', 'GND6_INT', 'GND7_INT', 'GND8_INT', 'GND9_INT',
],
-
- 'POWER_GPIO':
- ['VDD_GPIOA', 'VDD_GPIOB', 'VDD_GPIOC',
- 'VDD_GPIOD', 'VDD_GPIOE', 'VDD_GPIOF',
- 'VDD_GPIOG',
- 'GND_GPIOA', 'GND_GPIOB', 'GND_GPIOC',
- 'GND_GPIOD', 'GND_GPIOE', 'GND_GPIOF',
- 'GND_GPIOG',
- ]
-
- }
-
- display_fixed(fixedpins, len(pinouts))
-
- print "# Functions (PinMux)"
- print
- print "auto-generated by [[pinouts.py]]"
- print
+ 'POWER_GPIO': [
+ 'VDD_GPIOA', 'VDD_GPIOB', 'VDD_GPIOC',
+ 'VDD_GPIOD', 'VDD_GPIOE', 'VDD_GPIOF',
+ 'VDD_GPIOG',
+ 'GND_GPIOA', 'GND_GPIOB', 'GND_GPIOC',
+ 'GND_GPIOD', 'GND_GPIOE', 'GND_GPIOF',
+ 'GND_GPIOG',
+ ]}
function_names = {'EINT': 'External Interrupt',
'FB': 'MC68k FlexBus',
'IIS': 'I2S Audio',
- 'JTAG1': 'JTAG (same as JTAG2, JTAG_SEL=LOW)',
- 'JTAG2': 'JTAG (same as JTAG1, JTAG_SEL=HIGH)',
+ 'JTAG0': 'JTAG (same as JTAG1, JTAG_SEL=LOW)',
+ 'JTAG1': 'JTAG (same as JTAG0, JTAG_SEL=HIGH)',
'LCD': '24-pin RGB/TTL LCD',
'RG': 'RGMII Ethernet',
- 'MMC': 'eMMC 1/2/4/8 pin',
+ 'EMMC': 'eMMC 1/2/4/8 pin',
'PWM': 'PWM (pulse-width modulation)',
- 'SD1': 'SD/MMC 1',
- 'SD2': 'SD/MMC 2',
- 'SD3': 'SD/MMC 3',
+ 'MMC0': 'SD/MMC 0',
+ 'MMC1': 'SD/MMC 1',
+ 'MMC2': 'SD/MMC 2',
+ 'SPI0': 'SPI (Serial Peripheral Interface) 0',
'SPI1': 'SPI (Serial Peripheral Interface) 1',
- 'SPI2': 'SPI (Serial Peripheral Interface) 2',
'QSPI': 'Quad SPI (Serial Peripheral Interface) 1',
- 'TWI1': 'I2C 1',
- 'TWI2': 'I2C 2',
- 'TWI3': 'I2C 3',
- 'UART0': 'UART (TX/RX/CTS/RTS) 0',
- 'UART1': 'UART (TX/RX/CTS/RTS) 1',
+ 'TWI0': 'I2C 1',
+ 'TWI1': 'I2C 2',
+ 'TWI2': 'I2C 3',
+ 'QUART0': 'UART (TX/RX/CTS/RTS) 0',
+ 'QUART1': 'UART (TX/RX/CTS/RTS) 1',
+ 'UART0': 'UART (TX/RX) 0',
+ 'UART1': 'UART (TX/RX) 1',
'UART2': 'UART (TX/RX) 2',
- 'UART3': 'UART (TX/RX) 3',
- 'UART4': 'UART (TX/RX) 4',
- 'ULPI1': 'ULPI (USB Low Pin-count) 1',
- 'ULPI2': 'ULPI (USB Low Pin-count) 2',
- 'ULPI3': 'ULPI (USB Low Pin-count) 3',
- }
-
- fns = display_fns(bankspec, pinouts, function_names)
- print
-
- # Scenarios below can be spec'd out as either "find first interface"
- # by name/number e.g. SPI1, or as "find in bank/mux" which must be
- # spec'd as "BM:Name" where B is bank (A-F), M is Mux (0-3)
- # EINT and PWM are grouped together, specially, but may still be spec'd
- # using "BM:Name". Pins are removed in-order as listed from
- # lists (interfaces, EINTs, PWMs) from available pins.
+ 'ULPI0': 'ULPI (USB Low Pin-count) 1',
+ 'ULPI1': 'ULPI (USB Low Pin-count) 2',
+ 'ULPI2': 'ULPI (USB Low Pin-count) 3',
+ }
+
+ ps = PinSpec(pinbanks, fixedpins, function_names)
+
+ # Bank A, 0-15
+ ps.gpio("", ('A', 0), 0, 0, 16)
+ ps.spi("0", ('A', 0), 3)
+ ps.uartfull("1", ('A', 0), 2)
+ ps.i2c("0", ('A', 4), 2)
+ ps.emmc("", ('A', 0), 1)
+ #ps.uart("0", ('A', 14), 1)
+ ps.spi("1", ('A', 6), 2)
+ ps.eint("", ('A', 10), 1, start=0, limit=6)
+ ps.eint("", ('A', 4), 3, start=0, limit=6)
+ ps.sdmmc("0", ('A', 10), 2)
+ ps.jtag("0", ('A', 10), 3)
+ ps.uart("0", ('A', 14), 3)
+
+ # Bank B, 16-47
+ ps.gpio("", ('B', 0), 0, 0, 28)
+ ps.rgbttl("0", ('B', 0), 1)
+ ps.spi("0", ('B', 12), 2)
+ ps.quadspi("", ('B', 4), 2, limit=4)
+ ps.uart("1", ('B', 16), 2)
+ ps.i2c("2", ('B', 18), 2)
+ ps.pwm("", ('B', 9), 2, start=0, limit=1)
+ ps.pwm("", ('B', 20), 2, start=1, limit=2)
+ ps.sdmmc("0", ('B', 22), 2)
+ ps.eint("", ('B', 0), 3, start=6, limit=4)
+ ps.flexbus2("", ('B', 4), 3)
+ ps.i2c("0", ('B', 0), 2)
+ ps.uart("0", ('B', 2), 2)
+ ps.uart("2", ('B', 10), 2)
+
+ # Bank C, 48-71
+ ps.gpio("", ("C", 0), 0, 0, 24)
+ ps.ulpi("0", ('C', 0), 1)
+ ps.ulpi("1", ('C', 12), 1)
+ ps.spi("1", ('C', 8), 2)
+ #ps.spi("1", ('C', 28), 2)
+ ps.uartfull("0", ('C', 20), 3)
+ ps.eint("", ('C', 0), 3, start=10, limit=8)
+ ps.jtag("1", ('C', 8), 3)
+ ps.eint("", ('C', 12), 3, start=22, limit=8)
+ ps.uart("0", ('C', 22), 2)
+ ps.i2s("", ('C', 13), 2)
+ ps.pwm("", ('C', 21), 2, start=2, limit=1)
+
+ # Bank D, 72-96
+
+ # see comment in spec.interfaces.PinGen, this is complicated.
+ flexspec = {
+ 'FB_TS': ('FB_ALE', 2),
+ 'FB_CS2': ('FB_BWE2', 2),
+ 'FB_A0': ('FB_BWE2', 3),
+ 'FB_CS3': ('FB_BWE3', 2),
+ 'FB_A1': ('FB_BWE3', 3),
+ 'FB_TBST': ('FB_OE', 2),
+ 'FB_TSIZ0': ('FB_BWE0', 2),
+ 'FB_TSIZ1': ('FB_BWE1', 2),
+ }
+ #ps.mcu8080("", 72, 1)
+ ps.gpio("", ('D', 0), 0, 0, 24)
+ ps.flexbus1("", ('D', 0), 1, spec=flexspec)
+ ps.i2c("1", ('D', 8), 3)
+ ps.pwm("", ('D', 21), 1, start=0, limit=3)
+ ps.i2c("0", ('D', 10), 3)
+ ps.i2c("2", ('D', 19), 2)
+ ps.uartfull("0", ('D', 0), 2)
+ ps.uart("1", ('D', 21), 2)
+ ps.uart("2", ('D', 12), 2)
+ ps.eint("", ('D', 19), 3, start=18, limit=4)
+ ps.eint("", ('D', 23), 3, start=9, limit=1)
+ ps.eint("", ('D', 13), 3, start=5, limit=4)
+ ps.eint("", ('D', 0), 3, start=30, limit=2)
+ ps.i2c("1", ('D', 2), 3)
+ ps.sdmmc("1", ('D', 4), 2)
+
+ # Bank E
+ ps.gpio("", ('E', 0), 0, 0, 24)
+ ps.flexbus2("", ('E', 0), 1)
+ ps.sdmmc("1", ('E', 0), 2)
+ ps.sdmmc("2", ('E', 8), 2)
+ ps.quadspi("", ('E', 18), 2)
+ ps.uartfull("1", ('E', 14), 2)
+ ps.i2c("1", ('E', 6), 2)
+ ps.eint("", ('E', 0), 3, start=10, limit=8)
+ ps.eint("", ('E', 8), 3, start=22, limit=6)
+ ps.emmc("", ('E', 14), 3)
+
+ # Bank F
+ ps.gpio("", ('F', 0), 0, 0, 10)
+ ps.i2s("", ('F', 0), 1)
+ ps.i2c("0", ('F', 6), 2)
+ ps.pwm("", ('F', 8), 2, start=0, limit=1)
+ ps.pwm("", ('F', 9), 2, start=1, limit=1)
+ ps.uart("2", ('F', 8), 1)
+ ps.sdmmc("2", ('F', 0), 2)
+ ps.eint("", ('F', 0), 3, start=18, limit=4)
+ ps.pwm("", ('F', 4), 3, start=2, limit=1)
+ ps.eint("", ('F', 5), 3, start=7, limit=1)
+ ps.eint("", ('F', 6), 3, start=28, limit=4)
+
+ # Bank G
+ ps.gpio("", ('G', 0), 0, 0, 32)
+ ps.rgmii("", ('G', 0), 1)
+ ps.ulpi("2", ('G', 20), 1)
+ ps.rgbttl("1", ('G', 0), 2)
+ ps.quadspi("", ('G', 26), 3)
+ ps.flexbus2("", ('G', 0), 3)
+ ps.sdmmc("1", ('G', 24), 3, limit=2)
+ ps.sdmmc("1", ('G', 28), 2, start=2)
# EOMA68 scenario. not totally complete (some GPIO needed for PMIC)
# One interface to be connected to the MCU to give RTC and boot/dbg
# VBUS_EN, OTG_ID etc. are all not included below, there is plenty
# of spare GPIO.
- eoma68 = ['B1:LCD/22', 'ULPI1/8', 'ULPI2', 'MMC', 'SD1', 'UART3',
- 'TWI3', 'SPI2', 'E2:SD2',]
- eoma68_eint = ['EINT16', 'EINT17', 'EINT18', 'EINT19']
+ eoma68 = ['B1:LCD/22', 'ULPI0/8', 'ULPI1', 'EMMC', 'MMC0', 'UART1',
+ 'TWI2', 'SPI1', 'E2:MMC1', ]
+ eoma68_eint = ['EINT_16', 'EINT_17', 'EINT_18', 'EINT_19']
eoma68_pwm = ['D1:PWM_2']
descriptions = {
- 'MMC': 'internal (on Card)',
- 'SD1': 'user-facing: internal (on Card), multiplexed with JTAG1\n'
- 'and UART2, for debug purposes',
- 'TWI3': 'EOMA68-compliance: must be entirely free of devices.\n'
- 'Address 0x51 used (externally) for EOMA68 EEPROM Id',
- 'E2:SD2': 'EOMA68-compliance',
- 'SPI2': 'EOMA68-compliance',
- 'UART3': 'EOMA68-compliance',
- 'B1:LCD/22': 'EOMA68-compliance, 18-bit RGB/TTL LCD',
- 'ULPI1/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY',
- 'ULPI2': 'EOMA68-compliance: dual USB2 Host ULPI PHY'
+ 'EMMC': 'internal (on Card)',
+ 'MMC0': 'user-facing: internal (on Card), multiplexed with JTAG0\n'
+ 'and UART0, for debug purposes',
+ 'TWI2': 'EOMA68-compliance: must be entirely free of devices.\n'
+ 'Address 0x51 used (externally) for EOMA68 EEPROM Id',
+ 'E2:MMC1': 'EOMA68-compliance',
+ 'SPI1': 'EOMA68-compliance',
+ 'UART1': 'EOMA68-compliance',
+ 'B1:LCD/22': 'EOMA68-compliance, 18-bit RGB/TTL LCD',
+ 'ULPI0/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY',
+ 'ULPI1': 'EOMA68-compliance: dual USB2 Host ULPI PHY'
}
- unused_pins = check_functions("EOMA68", bankspec, fns, pinouts,
- eoma68, eoma68_eint, eoma68_pwm,
- descriptions)
+ ps.add_scenario("EOMA68", eoma68, eoma68_eint, eoma68_pwm, descriptions)
# Industrial scenario. not totally complete (some GPIO needed for PMIC)
# One interface to be connected to the MCU to give RTC, boot/dbg,
# Focus is on getting as many UARTs, SPIs and TWIs as possible.
# OTG_ID (if to be used) would require dropping some functions in order
# to free up GPIO. LCD could be reduced to 15-bit (freeing 3).
- # MMC could be reduced to 4-bit-wide, used as SD/MMC (freeing 4).
+ # EMMC could be reduced to 4-bit-wide, used as SD/MMC (freeing 4).
# QSPI could be used in 1-bit (MOSI/MISO) mode (freeing up 2 more).
- industrial = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'B2:SD1',
- 'JTAG1', 'A3:UART2', 'E2:UART1', 'C3:UART0',
- 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD3']
+ industrial = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI0/8', 'ULPI1/8',
+ 'EMMC', 'B2:MMC0',
+ 'JTAG0', 'A3:UART0', 'E2:QUART1', 'C3:QUART0',
+ 'F2:TWI0', 'D2:TWI1', 'D2:TWI2', 'SPI1', 'QSPI', 'F2:MMC2']
industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2']
- industrial_eint = ['EINT24', 'EINT25', 'EINT26', 'EINT27',
- 'EINT20', 'EINT21', 'EINT22', 'EINT23']
+ industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27',
+ 'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23']
- unused_pins = check_functions("Industrial", bankspec, fns, pinouts,
- industrial, industrial_eint, industrial_pwm)
+ ps.add_scenario("Industrial", industrial, industrial_eint,
+ industrial_pwm, None)
# Industrial scenario, using an SPI-based LCD instead of RGB/TTL
# not totally complete (some GPIO needed for PMIC)
# leaving some GPIO spare from the RGB/TTL bank (SPI CS#)
# also possibility of freeing up FlexBus CS# with a little reorg.
- industrial = ['D1:FB/17', 'E1:FB/8', 'B2:SPI1', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'B2:SD1',
- 'JTAG1',
- 'A3:UART2', 'E2:UART1', 'C3:UART0', 'B2:UART4', 'B2:UART3',
- 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD3']
+ industrial = ['D1:FB/17', 'E1:FB/8', 'B2:SPI0', 'ULPI0/8', 'ULPI1/8',
+ 'EMMC', 'B2:MMC0',
+ 'JTAG0',
+ 'A3:UART0', 'E2:QUART1', 'C3:QUART0', 'B2:UART2', 'B2:UART1',
+ 'F2:TWI0', 'D2:TWI1', 'D2:TWI2', 'SPI1', 'QSPI', 'F2:MMC2']
industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2']
- industrial_eint = ['EINT24', 'EINT25', 'EINT26', 'EINT27',
- 'EINT20', 'EINT21', 'EINT22', 'EINT23']
+ industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27',
+ 'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23']
ind_descriptions = {
- 'B2:SPI1': 'Used for 320x240 or 640x480 etc. SPI-based LCD.\n'
- 'Frees up large numbers of GPIO from RGB/TTL bank'
+ 'B2:SPI0': 'Used for 320x240 or 640x480 etc. SPI-based LCD.\n'
+ 'Frees up large numbers of GPIO from RGB/TTL bank'
}
- unused_pins = check_functions("Industrial with SPI-LCD",
- bankspec, fns, pinouts,
- industrial, industrial_eint, industrial_pwm,
- ind_descriptions)
+
+ ps.add_scenario("Industrial with SPI-LCD",
+ industrial, industrial_eint, industrial_pwm,
+ ind_descriptions)
# Smartphone / Tablet - basically the same thing
- tablet = ['B1:LCD/22', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'SD1',
- 'F1:IIS', # I2C Audio
- 'TWI2', # I2C Audio
- 'E2:UART1', # WIFI/BT
- 'E2:SD2', # WIFI
- 'C3:UART0', # GPS
- 'D2:UART3',
- 'D2:UART4',
- 'D3:TWI1', 'D2:TWI3', 'SPI2', 'QSPI']
- tablet_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
+ tablet = ['B1:LCD/22', 'ULPI0/8', 'ULPI1/8',
+ 'EMMC', 'MMC0',
+ 'F1:IIS', # I2C Audio
+ 'TWI1', # I2C Audio
+ 'E2:QUART1', # WIFI/BT
+ 'E2:MMC1', # WIFI
+ 'C3:QUART0', # GPS
+ 'D2:UART1',
+ 'D2:UART2',
+ 'D3:TWI0', 'D2:TWI2', 'SPI1', 'QSPI']
+ tablet_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
'F2:PWM_1', 'D1:PWM_2']
- tablet_eint = ['EINT24', # BT_HOST_WAKE
- 'EINT25', # WIFI_HOST_WAKE
- 'EINT26', # CTP_INT
- 'EINT27', # GSENSOR_INT
- 'EINT8', # GPS_INT
- 'EINT7', # TILT_SENSOR_INT
- 'EINT22', # COMPASS_INT
- 'EINT23', # MCU_INT
- 'EINT16', # PMIC_INT
- 'EINT17', # PWR_BUTTON_INT
- 'EINT30', # OTG_ID
- 'EINT31',
- ]
+ tablet_eint = ['EINT_24', # BT_HOST_WAKE
+ 'EINT_25', # WIFI_HOST_WAKE
+ 'EINT_26', # CTP_INT
+ 'EINT_27', # GSENSOR_INT
+ 'EINT_8', # GPS_INT
+ 'EINT_7', # TILT_SENSOR_INT
+ 'EINT_22', # COMPASS_INT
+ 'EINT_23', # MCU_INT
+ 'EINT_16', # PMIC_INT
+ 'EINT_17', # PWR_BUTTON_INT
+ 'EINT_30', # OTG_ID
+ 'EINT_31',
+ ]
descriptions = {
'B1:LCD/22':
- 'RGB/TTL LCD, 800x480 or use SN75LVDS83b for up to 1440x900',
- 'MMC': 'eMMC: main internal storage',
- 'ULPI1/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
+ 'RGB/TTL LCD, 800x480 or use SN75LVDS83b for up to 1440x900',
+ 'EMMC': 'eMMC: main internal storage',
+ 'ULPI0/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
'as well as USB Host or USB Device',
- 'ULPI2/8': 'USB2 Host, connect to ULPI PHY w/and 4-port USB2 Hub\n'
- 'for example GL850G or FE1.1. '
- 'Connects to 2/3/4G/LTE Modem, 2x USB-Camera (VC0345)',
- 'SD1': 'internal, multiplexed with JTAG1\n'
- 'and UART2, for debug purposes',
+ 'ULPI1/8': 'USB2 Host, connect to ULPI PHY w/and 4-port USB2 Hub\n'
+ 'for example GL850G or FE1.1. '
+ 'Connects to 2/3/4G/LTE Modem, 2x USB-Camera (VC0345)',
+ 'MMC0': 'internal, multiplexed with JTAG0\n'
+ 'and UART0, for debug purposes',
'F1:IIS': 'I2C Audio, connect to AC97 Audio IC',
- 'TWI2': 'Connect to AC97 Audio IC',
- 'E2:UART1': 'Connect to BT on AP6234/AP6335',
- 'E2:SD2': 'Connect to WIFI on AP6234/AP6335',
+ 'TWI1': 'Connect to AC97 Audio IC',
+ 'E2:QUART1': 'Connect to BT on AP6234/AP6335',
+ 'E2:MMC1': 'Connect to WIFI on AP6234/AP6335',
'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n'
'Only actually needs MISO/MOSI, bootstrap loader v. small\n'
'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.',
- 'SPI2': 'Spare? SPI, connect to higher-speed sensor?',
- 'D2:UART3': 'Spare? UART (or 2 extra GPIO / EINT)',
- 'D2:UART4': 'Spare? UART (or 2 extra GPIO)',
- 'D3:TWI1': 'Connect to PMIC',
- 'D2:TWI3': 'Connect to sensors (Trackpad? CTP GSENSOR TILT COMPASS)',
+ 'SPI1': 'Spare? SPI, connect to higher-speed sensor?',
+ 'D2:UART1': 'Spare? UART (or 2 extra GPIO / EINT)',
+ 'D2:UART2': 'Spare? UART (or 2 extra GPIO)',
+ 'D3:TWI0': 'Connect to PMIC',
+ 'D2:TWI2': 'Connect to sensors (Trackpad? CTP GSENSOR TILT COMPASS)',
'GPIO': '9 spare GPIO pins for miscellaneous functions:\n'
'wake-up of BT, WIFI, LCD power, sensor power etc.\n'
'4 GPIO may be needed for PWM Audio from Modem.\n'
'Some phones may have clam-shell or lid switch.\n'
'Some Modems have spare GPIO (over AT commandset).\n'
'AXP209 PMIC has 4x GPIO, accessible over I2C.\n'
- 'SPI2, UART3-4, PWM1-2 may also be spare (10 extra GPIO).\n'
+ 'SPI1, UART1-4, PWM1-2 may also be spare (10 extra GPIO).\n'
'If more needed, companion MCU may be used (48+ pin variant)\n'
'which also includes ADC, DAC, more PWM etc.',
'F2:PWM_0': 'LCD Backlight',
'F2:PWM_1': 'Spare? PWM (or extra GPIO / EINT)',
'D1:PWM_2': 'Spare? PWM (or extra GPIO / EINT)',
- 'EINT24': 'BT_HOST_WAKE',
- 'EINT25': 'WIFI_HOST_WAKE',
- 'EINT26': 'CTP_INT',
- 'EINT27': 'GSENSOR_INT',
- 'EINT8': 'GPS_INT',
- 'EINT7': 'TILT_SENSOR_INT',
- 'EINT22': 'COMPASS_INT',
- 'EINT23': 'MCU_INT',
- 'EINT16': 'PMIC_INT',
- 'EINT17': 'PWR_BUTTON_INT',
- 'EINT30': 'OTG_ID',
- 'EINT31': 'Spare?',
+ 'EINT_24': 'BT_HOST_WAKE',
+ 'EINT_25': 'WIFI_HOST_WAKE',
+ 'EINT_26': 'CTP_INT',
+ 'EINT_27': 'GSENSOR_INT',
+ 'EINT_8': 'GPS_INT',
+ 'EINT_7': 'TILT_SENSOR_INT',
+ 'EINT_22': 'COMPASS_INT',
+ 'EINT_23': 'MCU_INT',
+ 'EINT_16': 'PMIC_INT',
+ 'EINT_17': 'PWR_BUTTON_INT',
+ 'EINT_30': 'OTG_ID',
+ 'EINT_31': 'Spare?',
}
- unused_pins = check_functions("Smartphone / Tablet",
- bankspec, fns, pinouts,
- tablet, tablet_eint, tablet_pwm,
- descriptions)
+
+ ps.add_scenario("Smartphone / Tablet",
+ tablet, tablet_eint, tablet_pwm,
+ descriptions)
# Laptop
- laptop = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'SD1',
- 'F1:IIS', # I2C Audio
- 'TWI2', # I2C Audio
- 'E2:UART1', # WIFI/BT
- 'E2:SD3', # WIFI
- 'D2:TWI3', 'QSPI']
- laptop_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
- ]
- laptop_eint = ['EINT20', # BT_HOST_WAKE
- 'EINT21', # WIFI_HOST_WAKE
- 'EINT9', # MCU_INT
- 'EINT31', # PMIC_INT
- ]
+ laptop = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI0/8', 'ULPI1/8',
+ 'EMMC', 'MMC0',
+ 'F1:IIS', # I2C Audio
+ 'TWI1', # I2C Audio
+ 'E2:QUART1', # WIFI/BT
+ 'E2:MMC2', # WIFI
+ 'D2:TWI2', 'QSPI']
+ laptop_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
+ ]
+ laptop_eint = ['EINT_20', # BT_HOST_WAKE
+ 'EINT_21', # WIFI_HOST_WAKE
+ 'EINT_9', # MCU_INT
+ 'EINT_31', # PMIC_INT
+ ]
descriptions = {
'D1:FB/17': 'FlexBus. Connect to DM9000 or AX99896A MCU-style Bus\n'
- '10/100 Ethernet PHY.',
+ '10/100 Ethernet PHY.',
'E1:FB/8': 'FlexBus bus bits 8-15, needed to make a 16-bit bus width',
- 'B1:LCD/22':
- 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SSD2828 for MIPI,\n'
- 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
- 'display output (eDP/LVDS and HDMI/VGA) '
- 'conversion.',
- 'MMC': 'eMMC: main internal storage',
- 'ULPI1/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
- 'as well as USB Host or USB Device',
- 'ULPI2/8': 'USB2 Host, connect to ULPI PHY w/and 4-port USB2 Hub\n'
- 'for example GL850G or FE1.1. '
- 'Connects to USB-Camera (VC0345 and 3x external USB Ports)',
- 'SD1': 'internal, multiplexed with JTAG1\n'
- 'and UART2, for debug purposes',
+ 'B1:LCD/22': 'RGB/TTL LCD, use SN75LVDS83b for '
+ 'LVDS or SMMC2828 for MIPI,\n'
+ 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
+ 'display output (eDP/LVDS and HDMI/VGA) '
+ 'conversion.',
+ 'EMMC': 'eMMC: main internal storage',
+ 'ULPI0/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
+ 'as well as USB Host or USB Device',
+ 'ULPI1/8': 'USB2 Host, connect to ULPI PHY w/and 4-port USB2 Hub\n'
+ 'for example GL850G or FE1.1. '
+ 'Connects to USB-Camera (VC0345 and 3x external USB Ports)',
+ 'MMC0': 'internal, multiplexed with JTAG0\n'
+ 'and UART0, for debug purposes',
'F1:IIS': 'I2C Audio, connect to AC97 Audio IC',
- 'TWI2': 'Connect to AC97 Audio IC',
- 'E2:UART1': 'Connect to BT on AP6234/AP6335',
- 'E2:SD3': 'Connect to WIFI on AP6234/AP6335',
+ 'TWI1': 'Connect to AC97 Audio IC',
+ 'E2:QUART1': 'Connect to BT on AP6234/AP6335',
+ 'E2:MMC2': 'Connect to WIFI on AP6234/AP6335',
'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n'
- 'Only actually needs MISO/MOSI, bootstrap loader v. small\n'
- 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.\n'
- 'MCU implements keyboard-matrix for keyboard (also trackpad?)',
- 'D2:TWI3': 'Connect to PMIC',
+ 'Only actually needs MISO/MOSI, bootstrap loader v. small\n'
+ 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.\n'
+ 'MCU implements keyboard-matrix for keyboard (also trackpad?)',
+ 'D2:TWI2': 'Connect to PMIC',
'GPIO': 'Plenty of spare GPIO pins for miscellaneous functions\n'
- 'MCU EINT-capable GPIO may be used to generate extra EINTs\n'
- 'on the single MCU_INT line, if really needed',
+ 'MCU EINT-capable GPIO may be used to generate extra EINTs\n'
+ 'on the single MCU_INT line, if really needed',
'F2:PWM_0': 'LCD Backlight',
- 'EINT20': 'BT_HOST_WAKE',
- 'EINT21': 'WIFI_HOST_WAKE',
- 'EINT9': 'MCU_INT',
- 'EINT31': 'PMIC_INT',
+ 'EINT_20': 'BT_HOST_WAKE',
+ 'EINT_21': 'WIFI_HOST_WAKE',
+ 'EINT_9': 'MCU_INT',
+ 'EINT_31': 'PMIC_INT',
}
- unused_pins = check_functions("Laptop / Netbook",
- bankspec, fns, pinouts,
- laptop, laptop_eint, laptop_pwm,
- descriptions)
+ ps.add_scenario("Laptop / Netbook",
+ laptop, laptop_eint, laptop_pwm,
+ descriptions)
# IoT
- iot = ['B1:LCD', 'ULPI2/8', 'ULPI1/8',
- 'MMC', 'SD1',
- 'F1:IIS', # I2C Audio
- #'TWI2', # I2C Audio
- 'C3:UART0', # HSPA UART
- 'E2:UART1', # BT UART
- 'C2:SPI2', # HSPI SPI
- 'E2:SD3', # WIFI
- 'D3:TWI1', # sensors CTP,
- 'D2:TWI3', 'QSPI']
- iot_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
- ]
- iot_eint = [ 'EINT5', # 'HSPA_MST_RDY',
- 'EINT6', # 'HSPA_SL_RDY',
- 'EINT7', # 'HSPA_RING',
- 'EINT8', # 'WL_PMU_EN',
- 'EINT9', # HSPA_GPIO1
- 'EINT10', # IR_DT
- 'EINT11', # 'BT_PCM_CLK',
- 'EINT12', # 'BT_PCM_DIN',
- 'EINT13', # 'BT_PCM_SYNC',
- 'EINT14', # 'BT_PCM_DOUT',
- 'EINT16', # 'USB_DRVVBUS',
- 'EINT17', # 'USB_VBUSDET',
- 'EINT21', # 'USB_ID',
- 'EINT30', # 'CTP_INT',
- 'EINT31', # 'SD_DET#',
+ iot = ['B1:LCD', 'ULPI1/8', 'ULPI0/8',
+ 'EMMC', 'MMC0',
+ 'F1:IIS', # I2C Audio
+ #'TWI1', # I2C Audio
+ 'C3:QUART0', # HSPA UART
+ 'E2:QUART1', # BT UART
+ 'C2:SPI1', # HSPI SPI
+ 'E2:MMC2', # WIFI
+ 'D3:TWI0', # sensors CTP,
+ 'D2:TWI2', 'QSPI']
+ iot_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
+ ]
+ iot_eint = ['EINT_5', # 'HSPA_MST_RDY',
+ 'EINT_6', # 'HSPA_SL_RDY',
+ 'EINT_7', # 'HSPA_RING',
+ 'EINT_8', # 'WL_PMU_EN',
+ 'EINT_9', # HSPA_GPIO1
+ 'EINT_10', # IR_DT
+ 'EINT_11', # 'BT_PCM_CLK',
+ 'EINT_12', # 'BT_PCM_DIN',
+ 'EINT_13', # 'BT_PCM_SYNC',
+ 'EINT_14', # 'BT_PCM_DOUT',
+ 'EINT_16', # 'USB_DRVVBUS',
+ 'EINT_17', # 'USB_VBUSDET',
+ 'EINT_21', # 'USB_ID',
+ 'EINT_30', # 'CTP_INT',
+ 'EINT_31', # 'SD_DET#',
]
descriptions = {
'B1:LCD':
- 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SSD2828 for MIPI,\n'
- 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
- 'display output (eDP/LVDS and HDMI/VGA) '
- 'conversion.',
- 'MMC': 'eMMC: main internal storage',
+ 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SMMC2828 for MIPI,\n'
+ 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
+ 'display output (eDP/LVDS and HDMI/VGA) '
+ 'conversion.',
+ 'EMMC': 'eMMC: main internal storage',
'F1:IIS': 'I2C Audio, connect to AC97 Audio IC',
- 'ULPI2/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
+ 'ULPI1/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
'as well as USB Host or USB Device',
- 'ULPI1/8': 'USB2 Host, connect to ULPI PHY',
- 'SD1': 'internal, multiplexed with JTAG1\n'
- 'and UART2, for debug purposes',
- 'C3:UART0': 'Connect to HSPA UART',
- 'E2:UART1': 'Connect to BT UART',
- 'E2:SD3': 'Connect to WIFI',
- 'C2:SPI2': 'HSPA SPI',
+ 'ULPI0/8': 'USB2 Host, connect to ULPI PHY',
+ 'MMC0': 'internal, multiplexed with JTAG0\n'
+ 'and UART0, for debug purposes',
+ 'C3:QUART0': 'Connect to HSPA UART',
+ 'E2:QUART1': 'Connect to BT UART',
+ 'E2:MMC2': 'Connect to WIFI',
+ 'C2:SPI1': 'HSPA SPI',
'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n'
'Only actually needs MISO/MOSI, bootstrap loader v. small\n'
'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.\n'
'MCU implements keyboard-matrix for keyboard (also trackpad?)',
- 'D2:TWI3': 'Connect to PMIC',
- 'D3:TWI1': 'Connect to sensors CTP',
+ 'D2:TWI2': 'Connect to PMIC',
+ 'D3:TWI0': 'Connect to sensors CTP',
'GPIO': 'Plenty of spare GPIO pins for miscellaneous functions\n'
'MCU EINT-capable GPIO may be used to generate extra EINTs\n'
'on the single MCU_INT line, if really needed',
'F2:PWM_0': 'LCD Backlight',
- 'GPIOD4': 'WL_WAKE_AP',
- 'GPIOD5': 'BT_WAKE_AP',
- 'GPIOD6': 'AP_WAKE_BT',
- 'GPIOD7': 'AP_CK32KO',
- 'GPIOD8': 'HSPA_PWRON',
- 'GPIOD9': 'BT_RST_N',
- 'GPIOE5': 'HSPA_ON_OFF',
- 'GPIOD2': 'HSPA_SHUTDOWN',
- 'GPIOD3': 'CTP_RST',
- 'GPIOD12': 'LCD_RDN',
- 'GPIOD17': 'LCD_WRN',
- 'GPIOD18': 'LCD_RS',
- 'GPIOD21': 'LCD_CSN',
-
- 'EINT5': 'HSPA_MST_RDY',
- 'EINT6': 'HSPA_SL_RDY',
- 'EINT7': 'HSPA_RING',
- 'EINT8': 'WL_PMU_EN',
- 'EINT9': 'HSPA_GPIO1',
- 'EINT10': 'IR_DT',
- 'EINT11': 'BT_PCM_CLK',
- 'EINT12': 'BT_PCM_DIN',
- 'EINT13': 'BT_PCM_SYNC',
- 'EINT14': 'BT_PCM_DOUT',
-
- 'EINT16': 'USB_DRVVBUS',
- 'EINT17': 'USB_VBUSDET',
- 'EINT21': 'USB_ID',
- 'EINT30': 'CTP_INT',
- 'EINT31': 'SD_DETN',
+ 'GPIOD_D4': 'WL_WAKE_AP',
+ 'GPIOD_D5': 'BT_WAKE_AP',
+ 'GPIOD_D6': 'AP_WAKE_BT',
+ 'GPIOD_D7': 'AP_CK32KO',
+ 'GPIOD_D8': 'HSPA_PWRON',
+ 'GPIOD_D9': 'BT_RST_N',
+ 'GPIOE_E5': 'HSPA_ON_OFF',
+ 'GPIOD_D2': 'HSPA_SHUTDOWN',
+ 'GPIOD_D3': 'CTP_RST',
+ 'GPIOD_D12': 'LCD_RDN',
+ 'GPIOD_D17': 'LCD_WRN',
+ 'GPIOD_D18': 'LCD_RS',
+ 'GPIOD_D21': 'LCD_CSN',
+
+ 'EINT_5': 'HSPA_MST_RDY',
+ 'EINT_6': 'HSPA_SL_RDY',
+ 'EINT_7': 'HSPA_RING',
+ 'EINT_8': 'WL_PMU_EN',
+ 'EINT_9': 'HSPA_GPIO1',
+ 'EINT_10': 'IR_DT',
+ 'EINT_11': 'BT_PCM_CLK',
+ 'EINT_12': 'BT_PCM_DIN',
+ 'EINT_13': 'BT_PCM_SYNC',
+ 'EINT_14': 'BT_PCM_DOUT',
+
+ 'EINT_16': 'USB_DRVVBUS',
+ 'EINT_17': 'USB_VBUSDET',
+ 'EINT_21': 'USB_ID',
+ 'EINT_30': 'CTP_INT',
+ 'EINT_31': 'SD_DETN',
}
- unused_pins = check_functions("IoT",
- bankspec, fns, pinouts,
- iot, iot_eint, iot_pwm,
- descriptions)
-
- print "# Reference Datasheets"
- print
- print "datasheets and pinout links"
- print
- print "* <http://datasheets.chipdb.org/AMD/8018x/80186/amd-80186.pdf>"
- print "* <http://hands.com/~lkcl/eoma/shenzen/frida/FRD144A2701.pdf>"
- print "* <http://pinouts.ru/Memory/sdcard_pinout.shtml>"
- print "* p8 <http://www.onfi.org/~/media/onfi/specs/onfi_2_0_gold.pdf?la=en>"
- print "* <https://www.heyrick.co.uk/blog/files/datasheets/dm9000aep.pdf>"
- print "* <http://cache.freescale.com/files/microcontrollers/doc/app_note/AN4393.pdf>"
- print "* <https://www.nxp.com/docs/en/data-sheet/MCF54418.pdf>"
- print "* ULPI OTG PHY, ST <http://www.st.com/en/interfaces-and-transceivers/stulpi01a.html>"
- print "* ULPI OTG PHY, TI TUSB1210 <http://ti.com/product/TUSB1210/>"
-
- return pinouts, bankspec, fixedpins
+ ps.add_scenario("IoT",
+ iot, iot_eint, iot_pwm,
+ descriptions)
+
+ return ps
projects / pinmux.git / blobdiff