From: Luke Kenneth Casson Leighton Date: Sun, 5 Aug 2018 12:16:17 +0000 (+0100) Subject: temporarily rename spi to mspi and quadspi to mquadspi X-Git-Url: https://git.libre-soc.org/?p=pinmux.git;a=commitdiff_plain;h=621813ecbb40c1e380d4029f076e1eadebdb66b3 temporarily rename spi to mspi and quadspi to mquadspi --- diff --git a/src/spec/m_class.py b/src/spec/m_class.py index 4e28a44..8ad6d5f 100644 --- a/src/spec/m_class.py +++ b/src/spec/m_class.py @@ -78,8 +78,7 @@ def pinspec(): function_names = {'EINT': 'External Interrupt', 'FB': 'MC68k FlexBus', 'IIS': 'I2S Audio', - 'JTAG0': 'JTAG (same as JTAG1, JTAG_SEL=LOW)', - 'JTAG1': 'JTAG (same as JTAG0, JTAG_SEL=HIGH)', + 'JTAG': 'JTAG (multiplexed in 2 places)', 'LCD': '24-pin RGB/TTL LCD', 'RG': 'RGMII Ethernet', 'EMMC': 'eMMC 1/2/4/8 pin', @@ -87,9 +86,9 @@ def pinspec(): 'MMC0': 'SD/MMC 0', 'MMC1': 'SD/MMC 1', 'MMC2': 'SD/MMC 2', - 'SPI0': 'SPI (Serial Peripheral Interface) 0', - 'SPI1': 'SPI (Serial Peripheral Interface) 1', - 'QSPI': 'Quad SPI (Serial Peripheral Interface) 1', + 'MSPI0': 'SPI (Serial Peripheral Interface) 0', + 'MSPI1': 'SPI (Serial Peripheral Interface) 1', + 'MQSPI': 'Quad SPI (Serial Peripheral Interface) 1', 'TWI0': 'I2C 1', 'TWI1': 'I2C 2', 'TWI2': 'I2C 3', @@ -103,27 +102,33 @@ def pinspec(): 'ULPI2': 'ULPI (USB Low Pin-count) 3', } - ps = PinSpec(pinbanks, fixedpins, function_names) + ps = PinSpec(pinbanks, fixedpins, function_names, + {'lcd': {'bus': 'fastbus', + 'mmap': [['Cfg', 0x20000, 10] + ]}, + 'jtag': {'bus': 'fastbus'}, + 'fb': {'bus': 'fastbus'}, + }) # Bank A, 0-15 ps.gpio("", ('A', 0), 0, 0, 16) - ps.spi("0", ('A', 0), 3) + ps.mspi("0", ('A', 0), 3) ps.uartfull("1", ('A', 0), 2) ps.i2c("0", ('A', 4), 2) ps.emmc("", ('A', 0), 1) #ps.uart("0", ('A', 14), 1) - ps.spi("1", ('A', 6), 2) + ps.mspi("1", ('A', 6), 2) ps.eint("", ('A', 10), 1, start=0, limit=6) ps.eint("", ('A', 4), 3, start=0, limit=6) ps.sdmmc("0", ('A', 10), 2) - ps.jtag("0", ('A', 10), 3) + ps.jtag("", ('A', 10), 3) ps.uart("0", ('A', 14), 3) # Bank B, 16-47 ps.gpio("", ('B', 0), 0, 0, 28) ps.rgbttl("0", ('B', 0), 1) - ps.spi("0", ('B', 12), 2) - ps.quadspi("", ('B', 4), 2, limit=4) + ps.mspi("0", ('B', 12), 2) + ps.mquadspi("", ('B', 4), 2, limit=4) ps.uart("1", ('B', 16), 2) ps.i2c("2", ('B', 18), 2) ps.pwm("", ('B', 9), 2, start=0, limit=1) @@ -139,11 +144,11 @@ def pinspec(): ps.gpio("", ("C", 0), 0, 0, 24) ps.ulpi("0", ('C', 0), 1) ps.ulpi("1", ('C', 12), 1) - ps.spi("1", ('C', 8), 2) - #ps.spi("1", ('C', 28), 2) + ps.mspi("1", ('C', 8), 2) + #ps.mspi("1", ('C', 28), 2) ps.uartfull("0", ('C', 20), 3) ps.eint("", ('C', 0), 3, start=10, limit=8) - ps.jtag("1", ('C', 8), 3) + ps.jtag("", ('C', 8), 3) ps.eint("", ('C', 12), 3, start=22, limit=8) ps.uart("0", ('C', 22), 2) ps.i2s("", ('C', 13), 2) @@ -184,7 +189,7 @@ def pinspec(): ps.flexbus2("", ('E', 0), 1) ps.sdmmc("1", ('E', 0), 2) ps.sdmmc("2", ('E', 8), 2) - ps.quadspi("", ('E', 18), 2) + ps.mquadspi("", ('E', 18), 2) ps.uartfull("1", ('E', 14), 2) ps.i2c("1", ('E', 6), 2) ps.eint("", ('E', 0), 3, start=10, limit=8) @@ -209,7 +214,7 @@ def pinspec(): ps.rgmii("", ('G', 0), 1) ps.ulpi("2", ('G', 20), 1) ps.rgbttl("1", ('G', 0), 2) - ps.quadspi("", ('G', 26), 3) + ps.mquadspi("", ('G', 26), 3) ps.flexbus2("", ('G', 0), 3) ps.sdmmc("1", ('G', 24), 3, limit=2) ps.sdmmc("1", ('G', 28), 2, start=2) @@ -220,7 +225,7 @@ def pinspec(): # of spare GPIO. eoma68 = ['B1:LCD/22', 'ULPI0/8', 'ULPI1', 'EMMC', 'MMC0', 'UART1', - 'TWI2', 'SPI1', 'E2:MMC1', ] + 'TWI2', 'MSPI1', 'E2:MMC1', ] eoma68_eint = ['EINT_16', 'EINT_17', 'EINT_18', 'EINT_19'] eoma68_pwm = ['D1:PWM_2'] descriptions = { @@ -230,7 +235,7 @@ def pinspec(): 'TWI2': 'EOMA68-compliance: must be entirely free of devices.\n' 'Address 0x51 used (externally) for EOMA68 EEPROM Id', 'E2:MMC1': 'EOMA68-compliance', - 'SPI1': 'EOMA68-compliance', + 'MSPI1': 'EOMA68-compliance', 'UART1': 'EOMA68-compliance', 'B1:LCD/22': 'EOMA68-compliance, 18-bit RGB/TTL LCD', 'ULPI0/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY', @@ -250,8 +255,8 @@ def pinspec(): industrial = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI0/8', 'ULPI1/8', 'EMMC', 'B2:MMC0', - 'JTAG0', 'A3:UART0', 'E2:QUART1', 'C3:QUART0', - 'F2:TWI0', 'D2:TWI1', 'D2:TWI2', 'SPI1', 'QSPI', 'F2:MMC2'] + 'JTAG', 'A3:UART0', 'E2:QUART1', 'C3:QUART0', + 'F2:TWI0', 'D2:TWI1', 'D2:TWI2', 'MSPI1', 'MQSPI', 'F2:MMC2'] industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2'] industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27', 'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23'] @@ -269,9 +274,9 @@ def pinspec(): industrial = ['D1:FB/17', 'E1:FB/8', 'B2:SPI0', 'ULPI0/8', 'ULPI1/8', 'EMMC', 'B2:MMC0', - 'JTAG0', + 'JTAG', 'A3:UART0', 'E2:QUART1', 'C3:QUART0', 'B2:UART2', 'B2:UART1', - 'F2:TWI0', 'D2:TWI1', 'D2:TWI2', 'SPI1', 'QSPI', 'F2:MMC2'] + 'F2:TWI0', 'D2:TWI1', 'D2:TWI2', 'MSPI1', 'MQSPI', 'F2:MMC2'] industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2'] industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27', 'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23'] @@ -295,7 +300,7 @@ def pinspec(): 'C3:QUART0', # GPS 'D2:UART1', 'D2:UART2', - 'D3:TWI0', 'D2:TWI2', 'SPI1', 'QSPI'] + 'D3:TWI0', 'D2:TWI2', 'MSPI1', 'MQSPI'] tablet_pwm = ['F2:PWM_0', # LCD_BACKLIGHT 'F2:PWM_1', 'D1:PWM_2'] tablet_eint = ['EINT_24', # BT_HOST_WAKE @@ -326,10 +331,10 @@ def pinspec(): 'TWI1': 'Connect to AC97 Audio IC', 'E2:QUART1': 'Connect to BT on AP6234/AP6335', 'E2:MMC1': 'Connect to WIFI on AP6234/AP6335', - 'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' + 'MQSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' 'Only actually needs MISO/MOSI, bootstrap loader v. small\n' 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.', - 'SPI1': 'Spare? SPI, connect to higher-speed sensor?', + 'MSPI1': 'Spare? SPI, connect to higher-speed sensor?', 'D2:UART1': 'Spare? UART (or 2 extra GPIO / EINT)', 'D2:UART2': 'Spare? UART (or 2 extra GPIO)', 'D3:TWI0': 'Connect to PMIC', @@ -341,7 +346,7 @@ def pinspec(): 'Some phones may have clam-shell or lid switch.\n' 'Some Modems have spare GPIO (over AT commandset).\n' 'AXP209 PMIC has 4x GPIO, accessible over I2C.\n' - 'SPI1, UART1-4, PWM1-2 may also be spare (10 extra GPIO).\n' + 'MSPI1, UART1-4, PWM1-2 may also be spare (10 extra GPIO).\n' 'If more needed, companion MCU may be used (48+ pin variant)\n' 'which also includes ADC, DAC, more PWM etc.', 'F2:PWM_0': 'LCD Backlight', @@ -373,7 +378,7 @@ def pinspec(): 'TWI1', # I2C Audio 'E2:QUART1', # WIFI/BT 'E2:MMC2', # WIFI - 'D2:TWI2', 'QSPI'] + 'D2:TWI2', 'MQSPI'] laptop_pwm = ['F2:PWM_0', # LCD_BACKLIGHT ] laptop_eint = ['EINT_20', # BT_HOST_WAKE @@ -402,7 +407,7 @@ def pinspec(): 'TWI1': 'Connect to AC97 Audio IC', 'E2:QUART1': 'Connect to BT on AP6234/AP6335', 'E2:MMC2': 'Connect to WIFI on AP6234/AP6335', - 'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' + 'MQSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' 'Only actually needs MISO/MOSI, bootstrap loader v. small\n' 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.\n' 'MCU implements keyboard-matrix for keyboard (also trackpad?)', @@ -431,7 +436,7 @@ def pinspec(): 'C2:SPI1', # HSPI SPI 'E2:MMC2', # WIFI 'D3:TWI0', # sensors CTP, - 'D2:TWI2', 'QSPI'] + 'D2:TWI2', 'MQSPI'] iot_pwm = ['F2:PWM_0', # LCD_BACKLIGHT ] iot_eint = ['EINT_5', # 'HSPA_MST_RDY', @@ -467,7 +472,7 @@ def pinspec(): 'E2:QUART1': 'Connect to BT UART', 'E2:MMC2': 'Connect to WIFI', 'C2:SPI1': 'HSPA SPI', - 'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' + 'MQSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' 'Only actually needs MISO/MOSI, bootstrap loader v. small\n' 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.\n' 'MCU implements keyboard-matrix for keyboard (also trackpad?)',