feat(stage2): extracting bank and pin information from PinSpec for later use in the...

diff --git a/src/spec/stage2.py b/src/spec/stage2.py
index 3cd7fbafb424e223a8f883123801833d7bb684e5..221961695b450609054ff1172ac7ee9fbbdbb0f8 100644 (file)
--- a/src/spec/stage2.py
+++ b/src/spec/stage2.py
@@ -434,9 +434,45 @@ if __name__ == '__main__':
                       'UART0': 'UART (TX/RX) 0',
                      }
     ps = PinSpec(pinbanks, fixedpins, function_names)
                       'UART0': 'UART (TX/RX) 0',
                      }
     ps = PinSpec(pinbanks, fixedpins, function_names)

+    # Unit number, (Bank, pin #), mux, start, num # pins

     ps.gpio("", ('A', 0), 0, 0, 4)
     ps.uart("0", ('A', 0), 1)
     ps.i2c("0", ('A', 0), 2)
 
     print(dir(ps.gpio))
     ps.gpio("", ('A', 0), 0, 0, 4)
     ps.uart("0", ('A', 0), 1)
     ps.i2c("0", ('A', 0), 2)
 
     print(dir(ps.gpio))

-    print(ps.gpio.pinouts, ps.gpio.bankspec, ps.gpio.pinfn, ps.gpio.fname)
+    #print(ps.gpio.pinouts, ps.gpio.bankspec, ps.gpio.pinfn, ps.gpio.fname)
+    """
+    desc_dict_keys = ['UART0', 'TWI0', 'GPIOA_A0', 'GPIOA_A1', 'GPIOA_A2', 'GPIOA_A3']
+    eint = []
+    pwm = []
+    desc = {'UART0': 'Basic serial TX/RX serial port',
+            'TWI0': 'I2C interface',
+            'GPIOA_A0': 'Test GPIO0',
+            'GPIOA_A1': 'Test GPIO1',
+            'GPIOA_A2': 'Test GPIO2',
+            'GPIOA_A3': 'Test GPIO3'}
+    ps.add_scenario("Test Manual Pinmux", desc_dict_keys, eint, pwm, desc)
+    """
+    print("---------------------------------")
+    #with open("test.mdwn", "w") as of:
+    #    pinout, bankspec, pin_spec, fixedpins = ps.write(of)
+    #print("---------------------------------")
+
+    bk = ps.pinbanks.keys()
+    for bank in bk:
+        muxwidth = ps.muxwidths[bank]
+        print(bank, muxwidth)
+        pinidx = sorted(ps.keys())
+        for pin in pinidx:
+            print("---------------------------------")
+            print(pin)
+            pdata = ps.get(pin)
+            for mux in range(muxwidth):
+                if mux not in pdata:
+                    print("Mux %d : NC" % mux)
+                else:
+                    name, assigned_bank = pdata[mux]
+                    print("Mux %d : %s" % (mux, name))
+
+
+