(no commit message)

[libreriscv.git] / openpower / sv / rfc / ls012.mdwn

# External RFC ls012: Discuss priorities of Libre-SOC Scalar(Vector) ops

* <https://git.openpower.foundation/isa/PowerISA/issues/121>
* <https://bugs.libre-soc.org/show_bug.cgi?id=1051>
* <https://bugs.libre-soc.org/show_bug.cgi?id=1052>

The purpose of this RFC is:

* to give a full list of the upcoming Scalar opcodes developed by Libre-SOC
  (respecting and being cognisant that *all* of them are Vectorisable)
* formally agree a priority order on an itertive basis with new versions
  of this RFC,
* which ones should be EXT022 Sandbox, which in EXT0xx, which in EXT2xx,
* and for IBM to get a clear picture of the Opcode Allocation needs.

As this is a Formal ISA RFC the evaluation shall ultimatly define
(in advance of the actual submission of the instructions themselves)
which instructions will be submitted over the next 8-18 months.

*It is expected that readers visit and interact with the Libre-SOC
resources in order to do due-diligence on the prioritisation
evaluation. Otherwise the ISA WG is overwhelmed by "drip-fed" RFCs
that may turn out not to be useful, against a background of having
no guiding overview or pre-filtering, and everybody's precious time
is wasted.  Also note that the Libre-SOC Team, being funded by NLnet
under Privacy and Enhanced Trust Grants, are **prohibited** from signing
Commercial-Confidentiality NDAs, as doing so is a direct conflict of
interest with their funding body's Charitable Foundation Status and
remit, and therefore the **entire** set of almost 150 new SFFS instructions
can only go via the External RFC Process.  Also be advised and aware
that "Libre-SOC" != "RED Semiconductor Ltd". The two are completely **separate**
organisations*.

Worth bearing in mind during evaluation that every "Defined Word" may
or may not be Vectoriseable, but that every "Defined Word" should have
merits on its own, not just when Vectorised.  An example of a borderline
Vectoriseable Defined Word is `mv.swizzle` which only really becomes
high-priority for Audio/Video, Vector GPU and HPC Workloads, but has
less merit as a Scalar-only operation.

Power ISA Scalar (SFFS) has not been significantly advanced in 12
years: IBM's primary focus has understandably been on PackedSIMD VSX.
Unfortunately, with VSX being 914 instructions and 128-bit it is far too
much for any new team to consider (10 years development effort) and far
outside of Embedded or Tablet/Desktop/Laptop power budgets. Thus bringing
Power Scalar up-to-date to modern standards *and on its own merits*
is a reasonable goal, and the advantages of the reduced focus is that
SFFS remains RISC-paradigm, and  that lessons can be learned from other
ISAs from the intervening years.  Good examples here include `bmask`.

SVP64 Prefixing - also known by the terms "Zero-Overhead-Loop-Prefixing"
as well as "True-Scalable-Vector Prefixing" - also literally brings new
dimensions to the Power ISA. Thus when adding new Scalar "Defined Words"
it has to unavoidably and simultaneously be taken into consideration
their value when Vector-Prefixed, *as well as* SVP64Single-Prefixed.

**Target areas**

Whilst entirely general-purpose there are some categories that these
instructions are targetting: Bitmanipulation, Big-integer, cryptography,
Audio/Visual, High-Performance Compute, GPU workloads and DSP.

**Instruction count guide and approximate priority order**

* 6 - SVP64 Management [[ls008]] [[ls009]] [[ls010]]
* 5 - CR weirds [[sv/cr_int_predication]]
* 4 - INT<->FP mv [[ls006]]
* 19 - GPR LD/ST-PostIncrement-Update (saves hugely in hot-loops) [[ls011]]
* ~12 - FPR LD/ST-PostIncrement-Update (ditto) [[ls011]]
* 2 - Float-Load-Immediate (always saves one LD L1/2/3 D-Cache op) [[ls002]]
* 5 - Big-Integer Chained 3-in 2-out (64-bit Carry) [[sv/biginteger]]
* 6 - Bitmanip LUT2/3 operations. high cost high reward [[sv/bitmanip]]
* 1 - fclass (Scalar variant of xvtstdcsp) [[sv/fclass]]
* 5 - Audio-Video [[sv/av_opcodes]]
* 2 - Shift-and-Add (mitigates LD-ST-Shift; Cryptography e.g. twofish) [[ls004]]
* 2 - BMI group [[sv/vector_ops]]
* 2 - GPU swizzle [[sv/mv.swizzle]]
* 9 - FP DCT/FFT Butterfly (2/3-in 2-out)
* ~9 Integer DCT/FFT Butterfly <https://bugs.libre-soc.org/show_bug.cgi?id=1028>
* 18 - Trigonometric (1-arg) [[openpower/transcendentals]]
* 15 - Transcendentals (1-arg) [[openpower/transcendentals]]
* 25 - Transcendentals (2-arg) [[openpower/transcendentals]]

Summary tables are created below by different sort categories. Additional
columns as necessary can be requested to be added as part of update revisions
to this RFC.

# Target Area summaries

## SVP64 Management instructions

These without question have to go in EXT0xx.  Future extended variants,
bringing even more powerful capabilities, can be followed up later with
EXT1xx prefixed variants, which is not possible if placed in EXT2xx.
*Only `svstep` is actually Vectoriseable*, all other Management
instructions are UnVectoriseane.  PO1-Prefixed examples include adding
psvshape in order to support both Inner and Outer Product Matrix
Schedules, by providing the option to directly reverse the order of the
triple loops.  Outer is used for standard Matrix Multiply, but Inner is
required for Warshall Transitive Closure (on top of a cumulatively-applied
max instruction).

The Management Instructions themselves are all Scalar Operations, so
PO1-Prefixing is perfecly reasonable.  SVP64 Management instructions of
which there are only 6 are all 5 or 6 bit XO, meaning that the opcode
space they take up in EXT0xx is not alarmingly high for their intrinsic
strategic value.

## Transcendentals

Found at [[openpower/transcendentals]] these subdivide into high
priority for accelerating general-purpose and High-Performance Compute,
specialist 3D GPU operations suited to 3D visualisation, and low-priority
less common instructions where IEEE754 full bit-accuracy is paramount.
In 3D GPU scenarios for example even 12-bit accuracy can be overkill,
but for HPC Scientific scenarios 12-bit would be disastrous.

There are a **lot** of operations here, and they also bring Power
ISA up-to-date to IEEE754-2019.  Fortunately the number of critical
instructions is quite low, but the caveat is that if those operations
are utilised to synthesise other IEEE754 operations (divide by `pi` for
example) full bitlevel accuracy (a hard requirement for IEEE754) is lost.

Also worth noting that the Khronos Group defines minimum acceptable
bit-accuracy levels for 3D Graphics: these are **nowhere near** the full
accuracy demanded by IEEE754, the reason for the Khronos definitions is
a massive reduction often four-fold in power consumption and gate count
when 3D Graphics simply has no need for full accuracy.

*For 3D GPU markets this definitely needs addressing*

## Audio/Video

Found at [[sv/av_opcodes]] these do not require Saturated variants
because Saturation is added via [[sv/svp64]] (Vector Prefixing) and via
[[sv/svp64_single]] Scalar Prefixing. This is important to note for
Opcode Allocation because placing these operations in the UnVectoriseble
areas would irrediemably damage their value.  Unlike PackedSIMD ISAs
the actual number of AV Opcodes is remarkably small once the usual
cascading-option-multipliers (SIMD width, bitwidth, saturation,
HI/LO) are abstracted out to RISC-paradigm Prefixing, leaving just
absolute-diff-accumulate, min-max, average-add etc. as "basic primitives".

## Twin-Butterfly FFT/DCT/DFT for DSP/HPC/AI/AV

The number of uses in Computer Science for DCT, NTT, FFT and DFT,
is astonishing.  The wikipedia page lists over a hundred separate and
distinct areas: Audio, Video, Radar, Baseband processing, AI, Solomon-Reed
Error Correction, the list goes on and on.  ARM has special dedicated
Integer Twin-butterfly instructions. TI's MSP Series DSPs have had FFT
Inner loop support for over 30 years. Qualcomm's Hexagon VLIW Baseband
DSP can do full FFT triple loops in one VLIW group.

It should be pretty clear this is high priority.

With SVP64  [[sv/remap]] providing the Loop Schedules it falls to
the Scalar side of the ISA to add the prerequisite "Twin Butterfly"
operations, typically performing for example one multiply but in-place
subtracting that product from one operand and adding it to the other.
The *in-place* aspect is strategically extremely important for significant
reductions in Vectorised register usage, particularly for DCT.

## CR Weird group

Outlined in [[sv/cr_int_predication]] these instructions massively save
on CR-Field instruction count.  Multi-bit to single-bit and vice-versa
normally requiring several CR-ops (crand, crxor) are done in one single
instruction.  The reason for their addition is down to SVP64 overloading
CR Fields as Vector Predicate Masks.  Reducing instruction count in
hot-loops is considered high priority.

An additional need is to do popcount on CR Field bit vectors but adding
such instructions to the *Condition Register* side was deemed to be far
too much. Therefore, priority was giiven instead to transferring several
CR Field bits into GPRs, whereupon the full set of tandard Scalar GPR
Logical Operations may be used. This strategy has the side-effect of
keeping the CRweird group down to only five instructions.

## Big-integer Math

[[sv/biginteger]]  has always been a high priority area for commercial
applications, privacy, Banking, as well as HPC Numerical Accuracy:
libgmp as well as cryptographic uses in Asymmetric Ciphers. poly1305
and ec25519 are finding their way into everyday use via OpenSSL.

A very early variant of the Power ISA had a 32-bit Carry-in Carry-out
SPR. Its removal from subsequent revisions is regrettable.  An alternative
concept is to add six explicit 3-in 2-out operations that, on close
inspection, always turn out to be supersets of *existing Scalar
operations* that discard upper or lower DWords, or parts thereof.

*Thus it is critical to note that not one single one of these operations
expands the bitwidth of any existing Scalar pipelines*.

The `dsld` instruction for example merely places additional LSBs into the
64-bit shift (64-bit carry-in), and then places the (normally discarded)
MSBs into the second output register (64-bit carry-out). It does **not**
require a 128-bit shifter to replace the existing Scalar Power ISA
64-bit shifters.

The reduction in instruction count these operations bring, in critical
hotloops, is remarkably high, to the extent where a Scalar-to-Vector
operation of *arbitrary length* becomes just the one Vector-Prefixed
instruction.

Whilst these are 5-6 bit XO their utility is considered high strategic
value and as such are strongly advocated to be in EXT04. The alternative
is to bring back a 64-bit Carry SPR but how it is retrospectively
applicable to pre-existing Scalar Power ISA mutiply, divide, and shift
operations at this late stage of maturity of the Power ISA is an entire
area of research on its own deemed unlikely to be achievable.

## fclass and GPR-FPR moves

[[sv/fclass]] - just one instruction.  With SFFS being locked down to
exclude VSX, and there being no desire within the nascent OpenPOWER
ecosystem outside of IBM to implement the VSX PackedSIMD paradigm, it
becomes necessary to upgrade SFFS such that it is stand-alone capable. One
omission based on the assumption that VSX would always be present is an
equivalent to `xvtstdcsp`.

Similar arguments apply to the GPR-INT move operations, proposed in
[[ls006]], with the opportunity taken to add rounding modes present
in other ISAs that Power ISA VSX PackedSIMD does not have. Javascript
rounding, one of the worst offenders of Computer Science, requires a
phenomental 35 instructions with *six branches* to emulate in Power
ISA! For desktop as well as Server HTML/JS back-end execution of
javascript this becomes an obvious priority, recognised already by ARM
as just one example.

## Bitmanip LUT2/3

These LUT2/3 operations are high cost high reward. Outlined in
[[sv/bitmanip]], the simplest ones already exist in PackedSIMD VSX:
`xxeval`.  The same reasoning applies as to fclass: SFFS needs to be
stand-alone on its own merits and not "punished" should an implementor
choose not to implement any aspect of PackedSIMD VSX.

With Predication being such a high priority in GPUs and HPC, CR Field
variants of Ternary and Binary LUT instructions were considered high
priority, and again just like in the CRweird group the opportunity was
taken to work on *all* bits of a CR Field rather than just one bit as
is done with the existing CR operations crand, cror etc.

The other high strategic value instruction is `grevlut` (and  `grevluti`
which can generate a remarkably large number of regular-patterned magic
constants).  The grevlut set require of the order of 20,000 gates but
provide an astonishing plethora of innovative bit-permuting instructions
never seen in any other ISA.

The downside of all of these instructions is the extremely low XO bit
requirements: 2-3 bit XO due to the large immediates *and* the number of
operands required.  The LUT3 instructions are already compacted down to
"Overwrite" variants.  (By contrast the Float-Load-Immediate instructions
are a much larger XO because despite having 16-bit immediate only one
Register Operand is needed).

Realistically these high-value instructions should be proposed in EXT2xx
where their XO cost does not overwhelm EXT0xx.


## (f)mv.swizzle

[[sv/mv.swizzle]] is dicey. It is a 2-in 2-out operation whose value
as a Scalar instruction is limited *except* if combined with `cmpi` and
SVP64Single Predication, whereupon the end result is the RISC-synthesis
of Compare-and-Swap, in two instructions.

Where this instruction comes into its full value is when Vectorised.
3D GPU and HPC numerical workloads astonishingly contain between 10 to 15%
swizzle operations: access to YYZ, XY, of an XYZW Quaternion, performing
balancing of ARGB pixel data. The usage is so high that 3D GPU ISAs make
Swizzle a first-class priority in their VLIW words. Even 64-bit Embedded
GPU ISAs have a staggering 24-bits dedicated to 2-operand Swizzle.

So as not to radicalise the Power ISA the Libre-SOC team decided to
introduce mv Swizzle operations, which can always be Macro-op fused
in exactly the same way that ARM SVE predicated-move extends 3-operand
"overwrite" opcodes to full independent 3-in 1-out.

# BMI (bitmanipulation) group.

Whilst the [[sv/vector_ops]] instructions are only two in number, in
reality the `bmask` instruction has a Mode field allowing it to cover
**24** instructions, more than have been added to any other CPUs by
ARM, Intel or AMD.  Analyis of the BMI sets of these CPUs shows simple
patterns that can greatly simplify both Decode and implementation. These
are sufficiently commonly used, saving instruction count regularly,
that they justify going into EXT0xx.

The other instruction is `cprop` - Carry-Propagation - which takes
the P and Q from carry-propagation algorithms and generates carry
look-ahead. Greatly increases the efficiency of arbitrary-precision
integer arithmetic by combining what would otherwise be half a dozen
instructions into one. However it is still not a huge priority unlike
`bmask` so is probably best placed in EXT2xx.

## Float-Load-Immediate

Very easily justified.  As explained in [[ls002]] these always saves one
LD L1/2/3 D-Cache memory-lookup operation, by virtue of the Immediate
FP value being in the I-Cache side.  It is such a high priority that
these instuctions are easily justifiable adding into EXT0xx, despite
requiring a 16-bit immediate.  By designing the second-half instruction
as a Read-Modify-Write it saves on XO bitlength (only 5 bits), and can be
macro-op fused with its first-half to store a full IEEE754 FP32 immediate
into a register.

There is little point in putting these instructions into EXT2xx. Their
very benefit and inherent value *is* as 32-bit instructions, not 64-bit
ones. Likewise there is less value in taking up EXT1xx Enoding space
because EXT1xx only brings an additional 16 bits (approx) to the table,
and that is provided already by the second-half instuction.

Thus they qualify as both high priority and also EXT0xx candidates.

## FPR/GPR LD/ST-PostIncrement-Update

These instruction, outlined in [[ls011]], save hugely in hot-loops.
Early ISAs such as PDP-8, PDP-11, which inspired the iconic Motorola
68000, 88100, Mitch Alsup's MyISA 66000, and can even be traced back to
the iconic ultra-RISC CDC 6600, all had both pre- and post- increment
Addressing Modes.

The reason is very simple: it is a direct recognition of the practice
in c to frequently utilise both `*p++` and `*++p` which itself stems
from common need in Computer Science algorithms.

The problem for the Power ISA is - was - that the opcode space needed
to support both was far too great, and the decision was made to go with
pre-increment, on the basis that outside the loop a "pre-subtraction"
may be performed.

Whilst this is a "solution" it is less than ideal, and the opportunity
exists now with the EXT2xx Primary Opcodes to correct this and bring
Power ISA up a level.

## Shift-and-add

Shift-and-Add are proposed in [[ls004]].  They mitigate the need to add
LD-ST-Shift instructions which are a high-priority aspect of both x86
and ARM.  LD-ST-Shift is normally just the one instruction: Shift-and-add
brings that down to two, where Power ISA presently requires three.
Cryptography e.g. twofish also makes use of Integer double-and-add,
so the value of these instructions is not limited to Effective Address
computation.  They will also have value in Audio DSP.

Being a 10-bit XO it would be somewhat punitive to place these in EXT2xx
when their whole purpose and value is to reduce binary size in Address
offset computation, thus they are best placed in EXT0xx.


# Tables

The original tables are available publicly as as CSV file at
<https://git.libre-soc.org/?p=libreriscv.git;a=blob;f=openpower/sv/rfc/ls012/optable.csv;hb=HEAD>.
A python program auto-generates the tables in the following sections
by sorting into different useful priorities.

The key to headings and sections are as follows:

* **Area** - Target Area as described in above sections
* **XO Cost** - the number of bits required in the XO Field. whilst not
  the full picture it is a good indicator as to how costly in terms
  of Opcode Allocation a given instruction will be.  Lower number is
  a higher cost for the Power ISA's precious remaining Opcode space
* **rfc** the Libre-SOC External RFC resource,
  <https://libre-soc.org/openpower/sv/rfc/> where advance notice of
  upcoming RFCs in development may be found.
  *Reading advance Draft RFCs and providing feedback strongly advised*,
  it saves time and effort for the OPF ISA Workgroup.
* **SVP64** - Vectoriseable (SVP64-Prefixable) - also implies that
  SVP64Single is also permitted (required).
* **page** - Libre-SOC wiki page at which further information can
  be found.  Again: **advance reading strongly advised due to the
  sheer volume of information**.
* **PO1** - the instruction is capable of being PO1-Prefixed
  (given an EXT1xx Opcode Allocation). Bear in mind that this option
  is **mutually exclusively incompatible** with Vectorisation.
* **group** - the Primary Opcode Group recommended for this instruction.
  Options are EXT0xx (EXT000-EXT063), EXT1xx and EXT2xx.  A third area,
  EXT3xx, was available in an early Draft RFC but has been made "RESERVED"
  instead.  see [[sv/po9_encoding]].

[[!inline pages="openpower/sv/rfc/ls012/areas.mdwn" raw=yes ]]
[[!inline pages="openpower/sv/rfc/ls012/xo_cost.mdwn" raw=yes ]]

[[!tag opf_rfc]]