sync_up: Formatting fixes

[libreriscv.git] / openpower.mdwn

diff --git a/openpower.mdwn b/openpower.mdwn
index be3bb7a2a0df336bb796fd1b83fd26d1e9012285..da186f35b69cb6ad4c6d427ea795e555f6f0888e 100644 (file)
--- a/openpower.mdwn
+++ b/openpower.mdwn
@@ -1,12 +1,12 @@
 # OpenPOWER
 
 In the late 1980s [[!wikipedia IBM]] developed a POWER family of processors.
-This evolved to a specification known as the OpenPOWER ISA. In 2019 IBM made the OpenPOWER ISA [[!wikipedia Open_source]], to be looked after by the existing [[!wikipedia OpenPOWER_Foundation]]. Here is a longer history of [[!wikipedia IBM_POWER_microprocessors]]. These IBM proprietary processors 
-happen to implement what is now known as the OpenPOWER ISA. The names
+This evolved to a specification known as the POWER ISA. In 2019 IBM made the POWER ISA [[!wikipedia Open_source]], to be looked after by the existing [[!wikipedia OpenPOWER_Foundation]]. Here is a longer history of [[!wikipedia IBM_POWER_microprocessors]]. These IBM proprietary processors 
+happen to implement what is now known as the POWER ISA. The names
 POWER8, POWER9, POWER10 etc. are product designations equivalent to Intel
-i5, i7, i9 etc. and are frequently conflated with versions of the OpenPOWER ISA (v2.08, v3.0, v3.1).
+i5, i7, i9 etc. and are frequently conflated with versions of the POWER ISA (v2.07, v3.0c, v3.1b).
 
-Libre-SOC is basing its [[Simple-V Vectorisation|sv]] CPU extensions on OpenPOWER because it wants to be able to specify a machine that can be completely trusted, and because OpenPOWER, thanks to IBM's involvement,
+Libre-SOC is basing its [[Simple-V Vectorisation|sv]] CPU extensions on POWER ISA, because it wants to be able to specify a machine that can be completely trusted, and because POWER, thanks to IBM's involvement,
 is designed for high performance.
 
 See wikipedia page 
@@ -23,13 +23,15 @@ EULA released! looks good.
 # Links
 
 * OpenPOWER Membership
-  <https://openpowerfoundation.org/membership/how-to-join/membership-kit-9-27-16-4/>
+  <https://openpowerfoundation.org/join/>
 * OpenPower HDL Mailing list <http://lists.mailinglist.openpowerfoundation.org/mailman/listinfo/openpower-hdl-cores>
 * [[openpower/isatables]]
 * [[openpower/whitepapers]]
 * [[openpower/isa]] - pseudo-code extracted from POWER V3.0B PDF spec
 * [[openpower/gem5]]
 * [[openpower/sv]]
+* [[openpower/prefix_codes]] Decode/encode prefix-codes, used by JPEG, DEFLATE, etc.
+* [[openpower/opcode_regs_deduped]]
 * [[openpower/simd_vsx]]
 * [[openpower/ISA_WG]] - OpenPOWER ISA Working Group
 * [[openpower/pearpc]]
@@ -79,14 +81,6 @@ Thus it is completely unnecessary to add any vector opcodes - at all -
 saving hugely on both hardware and compiler development time when
 the concept is dropped on top of a pre-existing ISA.
 
-## Condition Registers
-
-Branch Facility (Section 2.3.1 V2.07B and V3.0B) has 4-bit registers: CR0 and CR1.  When SimpleV is active, it may be better to set CR6 (the Vector CR field) instead.
-
-## Carry
-
-SimpleV extends (wraps) *scalar* opcodes with a hardware-level for-loop. Therefore, each scalar operation with a carry-in and carry-out will **require its own carry in and out bit**. Most sensible location to use is the CRs
-
 # Integer Overflow / Saturate
 
 Typically used on vector operations (audio DSP), it makes no sense to have separate opcodes (Opcode 4 SPE).  To be done instead as CSRs / vector-flags on *standard* arithmetic operations.