* Jacob's simple-soft-float library growing
[Power FP compatibility](http://bugs.libre-riscv.org/show_bug.cgi?id=258)
and python bindings.
+* Kazan, the Vulkan driver Jacob is writing, is getting
+ a [new shader compiler IR](http://bugs.libre-riscv.org/show_bug.cgi?id=161).
* A Conference call with OpenPOWER Foundation Director, Hugh, and Timothy
Pearson from RaptorCS has been established every two weeks.
* The OpenPOWER Foundation is also running some open
Well dang, as you can see, suddenly it just went ballistic. There's
almost certainly things left off the list. For such a small team there's
a heck of a lot going on. We have an awful lot to do, in a short amount
-of time: the 180nm tape-out is in October 2020 - only 7 months away.
+of time: the 180nm tape-out is in October 2020.
With this update we're doing something slightly different: a request
has gone out [to the other team members](http://lists.libre-riscv.org/pipermail/libre-riscv-dev/2020-March/005428.html)
To test the decoder, we initially verified it against the tables we
extracted, and manually against the [POWER ISA
specification](https://openpowerfoundation.org/?resource_lib=power-isa-version-3-0). Later
-however, we came up with the idea of [verifying the
-decoder](https://git.libre-riscv.org/?p=soc.git;a=blob;f=src/soc/decoder/test/test_decoder_gas.py;h=9238d3878d964907c5569a3468d6895effb7dc02;hb=433ab59cf9b7ab1ae10754798fc1c110e705db76)
+however, we came up with the idea of
+[verifying the decoder](https://git.libre-riscv.org/?p=soc.git;a=blob;f=src/soc/decoder/test/test_decoder_gas.py;h=9238d3878d964907c5569a3468d6895effb7dc02;hb=433ab59cf9b7ab1ae10754798fc1c110e705db76)
against the output of the GNU assembler. This is done by selecting an
instruction type (integer reg/reg, integer immediate, load store,
etc), and randomly selecting the opcode, registers, immediates, and
instructions, and use Qemu's gdb interface to do the same. We would
then use Qemu's gdb interface to compare the register file and memory
with that of our SOC to verify that it is working correctly. I did
-some experimentation using this technique to verify a [rudimentary
-simulator](https://git.libre-riscv.org/?p=soc.git;a=blob;f=src/soc/simulator/test_sim.py;h=aadaf667eff7317b1aa514993cd82b9abedf1047;hb=433ab59cf9b7ab1ae10754798fc1c110e705db76)
+some experimentation using this technique to verify a
+[rudimentary simulator](https://git.libre-riscv.org/?p=soc.git;a=blob;f=src/soc/simulator/test_sim.py;h=aadaf667eff7317b1aa514993cd82b9abedf1047;hb=433ab59cf9b7ab1ae10754798fc1c110e705db76)
of the SOC backend, and it seemed to work quite well.
*(Note from Luke: this automated approach, taking either other people's
# simple-soft-float Library and POWER FP emulation
-The
-[simple-soft-float](https://salsa.debian.org/Kazan-team/simple-soft-float)
+(*written kindly by Jacob*)
+
+The [simple-soft-float](https://salsa.debian.org/Kazan-team/simple-soft-float)
library is a floating-point library Jacob wrote with the intention
of being a reference implementation of IEEE 754 for hardware testing
purposes. It's specifically designed to be written to be easier to
much larger set of floating-point status flags and exceptions than most
other ISAs.
-Thanks to RaptorCS for giving us remote access to a Power9 system,
+Thanks to Raptor CS for giving us remote access to a Power9 system,
since that makes it much easier verifying that the test cases are correct
(more on this below).
[simple-soft-float](https://docs.rs/simple-soft-float) and
[algebraics](https://docs.rs/algebraics) are available on docs.rs.
+The algebraics library was chosen as the
+[Crate of the Week for October 8, 2019 on This Week in
+Rust](https://this-week-in-rust.org/blog/2019/10/08/this-week-in-rust-307/#crate-of-the-week).
+
One of the really important things about these libraries: they're not
-specifically coded exclusively for Libre-SOC: like softfloat-3 itself
+specifically coded exclusively for Libre-SOC: like Berkeley softfloat itself
(and also like the [IEEE754 FPU](https://git.libre-riscv.org/?p=ieee754fpu.git))
they're intended for *general-purpose* use by other projects. These are
exactly the kinds of side-benefits for the wider Libre community that
sponsorship, from individuals, Foundations (such as NLNet) and Companies
(such as Purism and Raptor CS) brings.
+# Kazan Getting a New Shader Compiler IR
+
+(*written kindly by Jacob, a dedicated update on Kazan will definitely
+feature in the future*)
+
+After spending several weeks only to discover that translating directly from
+SPIR-V to LLVM IR, Vectorizing, and all the other front-end stuff all in a
+single step is not really feasible, Jacob has switched to [creating a new
+shader compiler IR](http://bugs.libre-riscv.org/show_bug.cgi?id=161) to allow
+decomposing the translation process into several smaller steps.
+
+The IR and
+SPIR-V to IR translator are being written simultaneously, since that allows
+more easily finding the things that need to be represented in the shader
+compiler IR. Because writing both of the IR and SPIR-V translator together is
+such a big task, we decided to pick an arbitrary point ([translating a totally
+trivial shader into the IR](http://bugs.libre-riscv.org/show_bug.cgi?id=177))
+and split it into tasks at that point so Jacob would be able to get paid
+after several months of work.
+
+The IR uses structured control-flow inspired by WebAssembly's control-flow
+constructs as well as
+[SSA](https://en.wikipedia.org/wiki/Static_single_assignment_form) but, instead
+of using traditional phi instructions, it uses block and loop parameters and
+return values (inspired by
+[Cranelift's EBB parameters](https://github.com/bytecodealliance/wasmtime/blob/master/cranelift/docs/ir.md#static-single-assignment-form)
+as well as both of the [Rust](https://www.rust-lang.org/) and
+[Lua](https://www.lua.org/) programming languages).
+
+The IR has a single pointer type for all data pointers (`data_ptr`),
+unlike LLVM IR where pointer types have a type they point to (like `*
+i32`, where `i32` is the type the pointer points to).
+
+Because having a serialized form of the IR is important for any good IR,
+like LLVM IR, it has a user-friendly textual form that can be both read
+and written without losing any information (assuming the IR is valid,
+comments are ignored). A binary form may be added later.
+
+Some example IR is
+[available in the Kazan repo](https://salsa.debian.org/Kazan-team/kazan/-/blob/master/docs/Shader%20Compiler%20IR%20Example.md).
+
# OpenPOWER Conference calls
We've now established a routine two-week conference call with Hugh Blemings,
USD $25,000, we're happy with USD $10 million. It's really up to you guys,
at Epic Games, as to what level you'd like to see us get to, and how fast.
-USD $600,000 for example we can instead of paying USD $1million to a proprietary
-company to license a DDR3 PHY for a limited one-time use and only a 32-bit
-wide interface, we can contract SymbioticEDA to *design* a DDR3 PHY for us,
-which both we *and the rest of the worldwide Silicon Community can use
-without limitation* because we will ask SymbioticEDA to make the design
-(and layout) libre-licensed, for anyone to use.
+USD $600,000 for example we can instead of paying USD $1million to a
+proprietary company to license a DDR3 PHY for a limited one-time use and
+only a 32-bit wide interface, we can contract SymbioticEDA to *design*
+a DDR3 PHY for us, which both we *and the rest of the worldwide Silicon
+Community can use without limitation* because we will ask SymbioticEDA
+to make the design (and layout) libre-licensed, for anyone to use.
USD 250,000 pays for the mask charges that will allow us to do the 40nm
quad-core ASIC that we have on the roadmap for the second chip. USD
a call with Michiel and Joost turned into an unexpected three hour online
marathon, scrambling to write almost fifty bugreports as part of the Schedule
to be attached to each Memorandum of Understanding. The mailing list
-got a [leeetle bit busy](http://lists.libre-riscv.org/pipermail/libre-riscv-dev/2020-March/005003.html)
+got a
+[leeetle bit busy](http://lists.libre-riscv.org/pipermail/libre-riscv-dev/2020-March/005003.html)
right around here.
Which emphasised for us the important need to subdivide the mailing list into
# Georgia Tech CREATE-X
-TODO
+(*This section kindly written by Yehowshua*)
+
+Yehowshua is a student at Georgia Tech currently pursuing a Masters in
+Computer Engineering - to graduate this summer. He had started working
+on Libre-SOC in December and wanted to to get Libre-SOC more funding so
+I could work on it full time.
+
+He originally asked if the ECE Chair at Georgia Tech would be willing
+to fund an in-department effort to deliver an SOC in collaboration
+with Libre-SOC(an idea to which he was quite receptive). Through Luke,
+Yehowshua got in contact with Chistopher Klaus who suggested Yehowshua
+should look into Klaus's startup accelerator program Create-X and perhaps
+consider taking Libre-SOC down the startup route. Robert Rhinehart, who
+had funded Libre-SOC a little in the past (*note from Luke: he donated
+the ZC706 and also funded modernisation of Richard Herveille's excellent
+[vga_lcd](https://github.com/RoaLogic/vga_lcd) Library*)
+also suggested that Yehowshua
+incorporate Libre-SOC with help from Create-X and said he would be willing
+to be a seed investor. All this happened by February.
+
+As of March, Yehowshua has been talking with Robert about what type of
+customers would be interested in Libre-SOC. Robert is largely interested in
+biological applications. Yehowshua also had a couple meetings with Rahul
+from Create-X. Yehowshua has started the incorporation of Libre-SOC. The
+parent company will probably be called Systèmes-Libres with Libre-SOC
+simply being one of the products we will offer. Yehowshua also attended
+HPCA in late February and had mentioned Libre-SOC during his talk. People
+seemed to find the idea quite interesting
+
+He will later be speaking with some well know startup lawyers that have
+an HQ in Atlanta to discuss business related things such as S Corps,
+C corps, taxes, wages, equity etc…
+
+Yehowshua plans for Systèmes-Libres to hire full time employees. Part
+time work on Libre-SOC will still be possible through donations and
+support from NL Net and companies like purism.
+
+Currently, Yehowshua plans to take the Create-X summer launch program
+and fund Systèmes-Libres by August. Full time wages would probably be
+set around 100k USD.
# LOAD/STORE Buffer and 6600 design documentation
many - layers of NDAs and reducing NREs and unnecessary and artificial
barriers for ASIC development: I helped him put in the submission, and
he was really happy to do the Cell Libraries that we will be using for
-LibreSOC's 180nm test tape-out in October 2020.)
+Libre-SOC's 180nm test tape-out in October 2020.)
# Public-Inbox and Domain Migration
and outputted c-code.
This leaves me wondering, as I mention on the HDL list, if we can do the same
-thing with large sections of the POWER Spec.
-
-# Build Servers
-
-TODO
+thing with large sections of the POWER Spec (*answer as of 3rd April 2020:
+[yes](https://git.libre-riscv.org/?p=soc.git;a=blob;f=src/soc/decoder/power_pseudo.py;h=f2e575e8c5b707e7ec2f8d2ea6ca6d36060e08ad;hb=af3c6727c8bb59623bf5672b867407b5516e8338)*)
+
+# Build Servers, Process Automation, and Reducing Cognitive Load
+
+(*written kindly by Cole*)
+
+Over the past month, Jacob, and a new project member Cole, set up a new
+build server for the project. The build server is an old computer that
+Jacob wasn't using anymore, that he decided to make available to the
+project for running continuous integration (CI) testing for the many
+modules and submodules of the project. The build server is a gitlab test
+runner instance using a Docker backend. As Luke has taken pains to make
+clear
+[many times](https://libre-riscv.org/HDL_workflow/),
+very large and complex python projects are guaranteed
+to fail without proper, extensive test coverage. This new build server
+will allow us to
+[automate](http://lists.libre-riscv.org/pipermail/libre-riscv-dev/2020-April/005687.html)
+the running, monitoring, and reporting of these
+tests, giving us the ability to push a commit and have it automatically
+"verified" as cohesive with the existing codebase. Automating feedback,
+will help provide more confidence to the engineers that their code isn't
+breaking some other functionality in a codebase they are working on,
+and should also help improve the ease of long-term maintainability
+of the code. The more we can automate the menial tasks that have to
+be repeated frequently, and are important for success of the project
+but are not related to progressing the engineering of the Libre-SOC,
+the more productive project members can be.
+
+To help continue to ease such administrative burdens on the engineers,
+Cole is also working on a repository of setup automation scripts. The first
+script is one that will replicate the setup of Jacob's build server,
+so that others who want to contribute computational resources to the
+project may do so easily. Cole is also working on a collection of modular
+scripts to automate the setup of the development environment for the
+HDL workflow and the layout of the SOC, including the installation of
+development branches of a substainal number of very complex pieces of
+software. This should help ease the process of onboarding new members
+to the project, especially some interns that we have coming onboard in
+the next few months to do the layout of the chip. These scripts will be
+available via the git.libre-riscv.org repository dev-env-setup, at the
+[following link](http://git.libre-riscv.org/?p=dev-env-setup.git)
# Conclusion
local community roots.
However what I definitely wasn't expecting was a United States President
-to be voted in who was eager and, frankly, stupid enough, to start *and
-escalate* a Trade war with China. The impact on the U.S economy alone, and the
-reputation of the whole country, has been detrimental in the extreme.
+to be voted in who was eager and willing to start *and escalate* a Trade
+war with China, even during the current world climate where both local
+and global collaboration, **not** competition, is more important than
+ever before. The impact of his decisions on the U.S economy alone, and
+the reputation of the whole country, has been detrimental in the extreme.
This combination leaves us - world-wide - with the strong possibility that
seemed so "preposterous" that I could in no way discuss it widely, let alone
projects / crowdsupply.git / blobdiff