--- /dev/null
+import os
+import subprocess
+
+from nmigen.build import *
+from nmigen.vendor.intel import *
+from .resources import *
+
+
+__all__ = ["MisterPlatform"]
+
+
+# The MiSTer platform is built around the DE10-Nano; if you update one you should update the other.
+class MisterPlatform(IntelPlatform):
+ device = "5CSEBA6" # Cyclone V 110K LEs
+ package = "U23" # UBGA-484
+ speed = "I7"
+ default_clk = "clk50"
+ resources = [
+ Resource("clk50", 0, Pins("V11", dir="i"),
+ Clock(50e6), Attrs(io_standard="3.3-V LVTTL")),
+ Resource("clk50", 1, Pins("Y13", dir="i"),
+ Clock(50e6), Attrs(io_standard="3.3-V LVTTL")),
+ Resource("clk50", 2, Pins("E11", dir="i"),
+ Clock(50e6), Attrs(io_standard="3.3-V LVTTL")),
+
+ *LEDResources(
+ pins="W15 AA24 V16 V15 AF26 AE26 Y16 AA23",
+ attrs=Attrs(io_standard="3.3-V LVTTL")),
+ *ButtonResources(
+ pins="AH17 AH16", invert=True,
+ attrs=Attrs(io_standard="3.3-V LVTTL")),
+ *SwitchResources(
+ pins="Y24 W24 W21 W20",
+ attrs=Attrs(io_standard="3.3-V LVTTL")),
+
+ # Arduino header
+ UARTResource(0,
+ rx="AG13", tx="AF13",
+ attrs=Attrs(io_standard="3.3-V LVTTL")),
+
+ # LTC2308 analogue-to-digital converter
+ SPIResource(0,
+ cs="U9", clk="V10", mosi="AC4", miso="AD4",
+ attrs=Attrs(io_standard="3.3-V LVTTL")),
+
+ # ADV7513 HDMI transmitter
+ # Note this has a lot of input formats for tx_d, but this defaults to RGB24
+ Resource("adv7513", 0,
+ Subsignal("tx_d_r", Pins("AD12 AE12 W8 Y8 AD11 AD10 AE11 Y5", dir="o")),
+ Subsignal("tx_d_g", Pins("AF10 Y4 AE9 AB4 AE7 AF6 AF8 AF5", dir="o")),
+ Subsignal("tx_d_b", Pins("AE4 AH2 AH4 AH5 AH6 AG6 AF9 AE8", dir="o")),
+ Subsignal("tx_clk", Pins("AG5", dir="o")),
+ Subsignal("tx_de", Pins("AD19", dir="o")),
+ Subsignal("tx_hs", Pins("T8", dir="o")),
+ Subsignal("tx_vs", Pins("V13", dir="o")),
+ Subsignal("tx_int", Pins("AF11", dir="i")),
+ Subsignal("i2s0", Pins("T13", dir="o")),
+ Subsignal("mclk", Pins("U11", dir="o")),
+ Subsignal("lrclk", Pins("T11", dir="o")),
+ Subsignal("sclk", Pins("T12", dir="o")),
+ Subsignal("scl", Pins("U10", dir="o")),
+ Subsignal("sda", Pins("AA4", dir="io")),
+ Attrs(io_standard="3.3-V LVTTL")),
+
+ # MiSTer SDRAM Board (required)
+ # https://github.com/MiSTer-devel/Hardware_MiSTer/blob/master/releases/sdram_xs_2.2.pdf
+ SDRAMResource(0,
+ clk="20", cs="33", we="27", ras="32", cas="31",
+ ba="34 35", a="37 38 39 40 28 25 26 23 24 21 36 22 19",
+ dq="1 2 3 4 5 6 7 8 18 17 16 15 14 13 9 10",
+ dqm="", conn=("gpio", 0), attrs=Attrs(io_standard="3.3-V LVCMOS")),
+
+ # MiSTer I/O Board (optional, but highly recommended)
+ # https://github.com/MiSTer-devel/Hardware_MiSTer/blob/master/releases/iobrd_6.0.pdf
+ Resource("power_led", 0, PinsN("1", dir="o", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
+ Resource("disk_led", 0, PinsN("3", dir="o", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
+ Resource("user_led", 0, PinsN("5", dir="o", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
+
+ Resource("reset_switch", 0, PinsN("17", dir="i", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
+ Resource("osd_switch", 0, PinsN("13", dir="i", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
+ Resource("user_switch", 0, PinsN("15", dir="i", conn=("gpio", 1)), Attrs(io_standard="3.3-V LVTTL")),
+
+ Resource("audio", 0,
+ Subsignal("l", Pins("2", dir="o", conn=("gpio", 1))),
+ Subsignal("r", Pins("7", dir="o", conn=("gpio", 1))),
+ Attrs(io_standard="3.3-V LVTTL")),
+
+ Resource("toslink", 0, Pins("9", dir="o", conn=("gpio", 1))),
+
+ *SDCardResources(0,
+ clk="13", cmd="6",
+ dat0="16", dat1="18", dat2="4", dat3="6",
+ conn=("gpio", 1), attrs=Attrs(io_standard="3.3-V LVTTL")),
+
+ # The schematic is difficult to understand here...
+ Resource("vga", 0,
+ Subsignal("r", Pins("28 32 34 36 38 40", dir="o", conn=("gpio", 1))),
+ Subsignal("g", Pins("27 31 33 35 37 39", dir="o", conn=("gpio", 1))),
+ Subsignal("b", Pins("21 23 25 26 24 24", dir="o", conn=("gpio", 1))),
+ Subsignal("hs", Pins("20", dir="o", conn=("gpio", 1))),
+ Subsignal("vs", Pins("19", dir="o", conn=("gpio", 1))),
+ Attrs(io_standard="3.3-V LVTTL"))
+ ]
+ connectors = [
+ # Located on the top of the board, above the chip.
+ Connector("gpio", 0,
+ "V12 E8 W12 D11 D8 AH13 AF7 AH14 AF4 AH3 "
+ "- - AD5 AG14 AE23 AE6 AD23 AE24 D12 AD20 "
+ "C12 AD17 AC23 AC22 Y19 AB23 AA19 W11 - - "
+ "AA18 W14 Y18 Y17 AB25 AB26 Y11 AA26 AA13 AA11 "),
+ # Located on the bottom of the board.
+ Connector("gpio", 1,
+ "Y15 AC24 AA15 AD26 AG28 AF28 AE25 AF27 AG26 AH27 "
+ "- - AG25 AH26 AH24 AF25 AG23 AF23 AG24 AH22 "
+ "AH21 AG21 AH23 AA20 AF22 AE22 AG20 AF21 - - "
+ "AG19 AH19 AG18 AH18 AF18 AF20 AG15 AE20 AE19 AE17 "),
+ Connector("arduino", 0,
+ "AG13 AF13 AG10 AG9 U14 U13 AG8 AH8 "
+ "AF17 AE15 AF15 AG16 AH11 AH12 AH9 AG11 "
+ "AH7"),
+ ]
+
+ def toolchain_program(self, products, name):
+ quartus_pgm = os.environ.get("QUARTUS_PGM", "quartus_pgm")
+ with products.extract("{}.sof".format(name)) as bitstream_filename:
+ # The @2 selects the second device in the JTAG chain, because this chip
+ # puts the ARM cores first.
+ subprocess.check_call([quartus_pgm, "--haltcc", "--mode", "JTAG",
+ "--operation", "P;" + bitstream_filename + "@2"])
+
+
+if __name__ == "__main__":
+ from .test.blinky import Blinky
+ MisterPlatform().build(Blinky(), do_program=True)
projects / nmigen-boards.git / commitdiff