pinmux.git
2021-06-10 Luke Kenneth... add naming and pin-order reverse option
2021-06-10 Luke Kenneth... mirror W pins to match coriolis2 pad positions
2021-06-10 Luke Kenneth... add SVG generator
2021-06-10 Luke Kenneth... swap over S and W to get SDRAM AD* to line up
2021-06-10 Luke Kenneth... correction on VSS/VDD internal/external
2021-06-10 Luke Kenneth... power shuffle, split SDRAM
2021-06-10 Luke Kenneth... moved CLK away from testout
2021-06-10 Luke Kenneth... move VCC/VSS inward on NORTH
2021-06-10 Luke Kenneth... move PLL around slightly, VCO on east top
2021-06-10 Luke Kenneth... renumber power, add support for Analog pad spec
2021-06-09 Luke Kenneth... rename sys_clk to sys_pllclk - conflict with litex
2021-06-09 Luke Kenneth... pinmux update for ls180
2021-05-22 Luke Kenneth... raise pinmux SYS pincount to 7 to include PLL
2021-04-24 Luke Kenneth... argh reorder functions to not be recursively dependent
2021-04-13 Luke Kenneth... fix litex name map
2021-04-13 Luke Kenneth... fix litex name map
2021-04-13 Luke Kenneth... add litex name map
2021-04-13 Luke Kenneth... add litex name map
2021-04-13 Luke Kenneth... add pin-to-litex json map
2021-04-13 Luke Kenneth... update names of PLL connections for ls180
2021-04-05 Luke Kenneth... do not try to merge OE signals into one for JTAG bounda...
2021-04-01 Luke Kenneth... disable PLL temporarily
2021-04-01 Luke Kenneth... use OrderedDict in pinmap so that JTAG boundary scan...
2021-03-27 Luke Kenneth... comment out sdmmc
2021-03-27 Luke Kenneth... change name format of EINT pads for litex, sigh
2021-03-27 Luke Kenneth... change name format of EINT pads for litex, sigh
2021-03-25 Luke Kenneth... re-add sdmmc ls180
2021-03-25 Luke Kenneth... comment out eint litex problem
2021-03-25 Luke Kenneth... comment out eint litex problem
2021-03-25 Luke Kenneth... comment out sd0 litex problem
2021-03-25 Luke Kenneth... temporary comment out mspi0, litex problem
2021-03-16 Luke Kenneth... SDR DQMask incorrectly bi-directional, actually an...
2020-11-30 Luke Kenneth... whoops invert vss/vdd power/ground by mistake
2020-11-13 Luke Kenneth... rename ls180 pllock signal
2020-11-13 Luke Kenneth... rename pll_48_o to pll_18_o in ls180 spec
2020-11-11 Luke Kenneth... remove extraneous debug prints
2020-11-11 Luke Kenneth... extend sys_clk pad name
2020-11-11 Luke Kenneth... explicitly add sys_clk pad
2020-11-11 Luke Kenneth... power and ground have to be named power and ground
2020-11-11 Luke Kenneth... rename ls180 (io)vdd/vss pads
2020-11-11 Luke Kenneth... add not-connected pads to ls180
2020-11-11 Luke Kenneth... explicit add of sys pll lock to ls180
2020-11-11 Luke Kenneth... explicit add of sys pll lock to ls180
2020-11-11 Luke Kenneth... missing domain indicator, which removed EINT and PWM...
2020-11-10 Luke Kenneth... move sys group over to opposite south corner
2020-11-10 Luke Kenneth... PLL sys group has 2 select lines and PLL Lock out
2020-11-07 Luke Kenneth... really laborious way of getting the direction of the...
2020-11-06 Luke Kenneth... reference correct pads for sl180 pwm
2020-11-06 Luke Kenneth... rename VSS/VDD for ls180
2020-10-06 Luke Kenneth... ignore built spec (ls180)
2020-10-04 Luke Kenneth... apparently sdcard CMD is bi-directional
2020-10-04 Luke Kenneth... rename spi_master to spimaster
2020-10-04 Luke Kenneth... add pinmap to json file
2020-10-04 Luke Kenneth... add master-only I2C (suits litex functions)
2020-10-04 Luke Kenneth... add pinspec to json output
2020-10-04 Luke Kenneth... match up VSS/VDD numbers
2020-10-04 Luke Kenneth... match up VSS/VDD numbers
2020-10-04 Luke Kenneth... add io and ext vss/vdd
2020-10-02 Luke Kenneth... whoops, order of functions incorrect
2020-10-02 Luke Kenneth... create pinmap dictionaries
2020-10-02 Luke Kenneth... add domains and clocks to be able to create different...
2020-10-01 Luke Kenneth... establish clocks of each function in a pinspec clocks...
2020-10-01 Luke Kenneth... add litex-coriolis2 pad map
2020-09-30 Luke Kenneth... add I2C interface
2020-09-27 Luke Kenneth... remove SDRAM name from pin
2020-09-27 Luke Kenneth... change sys/clk/rst to group together, add clock-select
2020-09-25 Luke Kenneth... update ls180 descriptions
2020-09-25 Luke Kenneth... add descriptions and scenario
2020-09-25 Luke Kenneth... ls180 pinouts
2020-05-17 Luke Kenneth... start adding some pins to ls180
2020-05-12 Luke Kenneth... bugfix start-point prototype pinmux for LibreSOC 180nm
2020-05-12 Luke Kenneth... add dummy LPC interface
2020-05-12 Luke Kenneth... add ls180 spec
2020-05-09 Luke Kenneth... mess about with microtest to get the scenario working
2020-05-09 Luke Kenneth... fix numbering in microtest
2019-11-25 rishucodingadding documentation for generating pimux.bsv
2018-10-03 rishucodingalignment in test/pinmap.txt
2018-08-05 Luke Kenneth... fix fast addr map
2018-08-05 Luke Kenneth... move slowifdeclmux to class
2018-08-05 Luke Kenneth... axi_fastaddr_map becomes class
2018-08-05 Luke Kenneth... new axi addr map class
2018-08-05 Luke Kenneth... merge redundant function params
2018-08-05 Luke Kenneth... pep8 cleanup
2018-08-05 Luke Kenneth... remove repeated calls, use __call__
2018-08-05 Luke Kenneth... use class iterator for mk_connection (all of them)
2018-08-05 Luke Kenneth... convert m_ext_ifacedef to class
2018-08-05 Luke Kenneth... pep8 cleanup
2018-08-05 Luke Kenneth... convert MkClkCon to iterator
2018-08-05 Luke Kenneth... convert to class style for peripheral gen
2018-08-05 Luke Kenneth... remove redundant calls
2018-08-05 Luke Kenneth... temporarily rename spi to mspi and quadspi to mquadspi
2018-08-05 Luke Kenneth... re-add uart into m_class
2018-08-05 Luke Kenneth... update m_class to emmc naming
2018-08-05 Luke Kenneth... cleanup templates in peripheral_gen base
2018-08-05 Luke Kenneth... add emmc doc summary
2018-08-05 Luke Kenneth... pep8 whitespace cleanup
2018-08-05 Luke Kenneth... add slow peripheral generation instructions
2018-08-05 Luke Kenneth... testing
2018-08-05 Luke Kenneth... add emmc dummy peripheral
2018-08-05 Luke Kenneth... add emmc to slow_peripherals
next