Allow the formal engine to perform a same-cycle result in the ALU

[soc.git] / src / experiment / compalu.py

diff --git a/src/experiment/compalu.py b/src/experiment/compalu.py
deleted file mode 100644 (file)
index 1c9248f..0000000
--- a/src/experiment/compalu.py
+++ /dev/null
@@ -1,99 +0,0 @@
-from nmigen.compat.sim import run_simulation
-from nmigen.cli import verilog, rtlil
-from nmigen import Module, Signal, Elaboratable
-
-from nmutil.latch import SRLatch
-
-
-class ComputationUnitNoDelay(Elaboratable):
-    def __init__(self, rwid, opwid, alu):
-        self.rwid = rwid
-        self.alu = alu
-
-        self.go_rd_i = Signal(reset_less=True) # go read in
-        self.go_wr_i = Signal(reset_less=True) # go write in
-        self.issue_i = Signal(reset_less=True) # fn issue in
-
-        self.oper_i = Signal(opwid, reset_less=True) # opcode in
-        self.src1_i = Signal(rwid, reset_less=True) # oper1 in
-        self.src2_i = Signal(rwid, reset_less=True) # oper2 in
-
-        self.busy_o = Signal(reset_less=True) # fn busy out
-        self.data_o = Signal(rwid, reset_less=True) # Dest out
-        self.req_rel_o = Signal(reset_less=True) # release request out (valid_o)
-
-    def elaborate(self, platform):
-        m = Module()
-        m.submodules.alu = self.alu
-        m.submodules.src_l = src_l = SRLatch(sync=False)
-        m.submodules.opc_l = opc_l = SRLatch(sync=False)
-        m.submodules.req_l = req_l = SRLatch(sync=False)
-
-        # This is fascinating and very important to observe that this
-        # is in effect a "3-way revolving door".  At no time may all 3
-        # latches be set at the same time.
-
-        # opcode latch (not using go_rd_i)
-        m.d.comb += opc_l.s.eq(self.go_wr_i)
-        m.d.comb += opc_l.r.eq(self.issue_i)
-
-        # src operand latch (not using go_wr_i)
-        m.d.comb += src_l.s.eq(self.issue_i)
-        m.d.comb += src_l.r.eq(self.go_rd_i)
-
-        # dest operand latch (not using issue_i)
-        m.d.comb += req_l.s.eq(self.go_rd_i)
-        m.d.comb += req_l.r.eq(self.go_wr_i)
-
-        # XXX
-        # XXX NOTE: sync on req_rel_o and data_o due to simulation lock-up
-        # XXX
-
-        # outputs
-        m.d.comb += self.busy_o.eq(opc_l.qn) # busy out
-        m.d.comb += self.req_rel_o.eq(req_l.qn & opc_l.q) # request release out
-
-        with m.If(src_l.q):
-            m.d.comb += self.alu.a.eq(self.src1_i)
-            m.d.comb += self.alu.b.eq(self.src2_i)
-
-        #with m.If(opc_l.q): # XXX operand type in at same time as src1/src2
-            m.d.comb += self.alu.op.eq(self.oper_i)
-
-        with m.If(req_l.qn):
-            m.d.comb += self.data_o.eq(self.alu.o)
-
-        return m
-
-def scoreboard_sim(dut):
-    yield dut.dest_i.eq(1)
-    yield dut.issue_i.eq(1)
-    yield
-    yield dut.issue_i.eq(0)
-    yield
-    yield dut.src1_i.eq(1)
-    yield dut.issue_i.eq(1)
-    yield
-    yield
-    yield
-    yield dut.issue_i.eq(0)
-    yield
-    yield dut.go_read_i.eq(1)
-    yield
-    yield dut.go_read_i.eq(0)
-    yield
-    yield dut.go_write_i.eq(1)
-    yield
-    yield dut.go_write_i.eq(0)
-    yield
-
-def test_scoreboard():
-    dut = Scoreboard(32, 8)
-    vl = rtlil.convert(dut, ports=dut.ports())
-    with open("test_scoreboard.il", "w") as f:
-        f.write(vl)
-
-    run_simulation(dut, scoreboard_sim(dut), vcd_name='test_scoreboard.vcd')
-
-if __name__ == '__main__':
-    test_scoreboard()