from nmigen.compat.sim import run_simulation
from nmigen.cli import verilog, rtlil
-from nmigen import Module, Const, Signal, Array, Cat, Elaboratable
+from nmigen import Module, Const, Signal, Array, Cat, Elaboratable, Memory
from regfile.regfile import RegFileArray, treereduce
from scoreboard.fu_fu_matrix import FUFUDepMatrix
from scoreboard.issue_unit import IssueUnitGroup, IssueUnitArray, RegDecode
from scoreboard.shadow import ShadowMatrix, BranchSpeculationRecord
from scoreboard.instruction_q import Instruction, InstructionQ
+from scoreboard.memfu import MemFunctionUnits
from compalu import ComputationUnitNoDelay
+from compldst import LDSTCompUnit
from alu_hier import ALU, BranchALU
from nmutil.latch import SRLatch
from math import log
-class Memory(Elaboratable):
+class TestMemory(Elaboratable):
def __init__(self, regwid, addrw):
- self.ddepth = regwid/8
- depth = (1<<addrw) / self.ddepth
+ self.ddepth = 1 # regwid //8
+ depth = (1<<addrw) // self.ddepth
self.adr = Signal(addrw)
self.dat_r = Signal(regwid)
self.dat_w = Signal(regwid)
class MemSim:
def __init__(self, regwid, addrw):
self.regwid = regwid
- self.ddepth = regwid//8
+ self.ddepth = 1 # regwid//8
depth = (1<<addrw) // self.ddepth
self.mem = list(range(0, depth))
Computation Unit" as defined by Mitch Alsup (see section
11.4.9.3)
"""
- def __init__(self, rwid, units):
+ def __init__(self, rwid, units, ldstmode=False):
""" Inputs:
* :rwid: bit width of register file(s) - both FP and INT
* :units: sequence of ALUs (or CompUnitsBase derivatives)
"""
self.units = units
+ self.ldstmode = ldstmode
self.rwid = rwid
self.rwid = rwid
if units and isinstance(units[0], CompUnitsBase):
self.go_wr_i = Signal(n_units, reset_less=True)
self.shadown_i = Signal(n_units, reset_less=True)
self.go_die_i = Signal(n_units, reset_less=True)
+ if ldstmode:
+ self.go_ad_i = Signal(n_units, reset_less=True)
# outputs
self.busy_o = Signal(n_units, reset_less=True)
self.rd_rel_o = Signal(n_units, reset_less=True)
self.req_rel_o = Signal(n_units, reset_less=True)
+ if ldstmode:
+ self.adr_rel_o = Signal(n_units, reset_less=True)
+ self.sto_rel_o = Signal(n_units, reset_less=True)
+ self.req_rel_o = Signal(n_units, reset_less=True)
+ self.load_mem_o = Signal(n_units, reset_less=True)
+ self.stwd_mem_o = Signal(n_units, reset_less=True)
# in/out register data (note: not register#, actual data)
self.data_o = Signal(rwid, reset_less=True)
comb += alu.src1_i.eq(self.src1_i)
comb += alu.src2_i.eq(self.src2_i)
+ if not self.ldstmode:
+ return m
+
+ ldmem_l = []
+ stmem_l = []
+ go_ad_l = []
+ adr_rel_l = []
+ sto_rel_l = []
+ for alu in self.units:
+ adr_rel_l.append(alu.adr_rel_o)
+ sto_rel_l.append(alu.sto_rel_o)
+ ldmem_l.append(alu.load_mem_o)
+ stmem_l.append(alu.stwd_mem_o)
+ go_ad_l.append(alu.go_ad_i)
+ comb += self.adr_rel_o.eq(Cat(*adr_rel_l))
+ comb += self.sto_rel_o.eq(Cat(*sto_rel_l))
+ comb += self.load_mem_o.eq(Cat(*ldmem_l))
+ comb += self.stwd_mem_o.eq(Cat(*stmem_l))
+ comb += Cat(*go_ad_l).eq(self.go_ad_i)
+
+ return m
+
+
+class CompUnitLDSTs(CompUnitsBase):
+
+ def __init__(self, rwid, opwid, n_ldsts, mem):
+ """ Inputs:
+
+ * :rwid: bit width of register file(s) - both FP and INT
+ * :opwid: operand bit width
+ """
+ self.opwid = opwid
+
+ # inputs
+ self.oper_i = Signal(opwid, reset_less=True)
+ self.imm_i = Signal(rwid, reset_less=True)
+
+ # Int ALUs
+ alus = []
+ for i in range(n_ldsts):
+ alus.append(ALU(rwid))
+
+ units = []
+ for alu in alus:
+ aluopwid = 4 # see compldst.py for "internal" opcode
+ units.append(LDSTCompUnit(rwid, aluopwid, alu, mem))
+
+ CompUnitsBase.__init__(self, rwid, units, ldstmode=True)
+
+ def elaborate(self, platform):
+ m = CompUnitsBase.elaborate(self, platform)
+ comb = m.d.comb
+
+ # hand the same operation to all units, 4 lower bits though
+ for alu in self.units:
+ comb += alu.oper_i[0:4].eq(self.oper_i)
+ comb += alu.imm_i.eq(self.imm_i)
+ comb += alu.isalu_i.eq(0)
+
return m
class CompUnitALUs(CompUnitsBase):
- def __init__(self, rwid, opwid):
+ def __init__(self, rwid, opwid, n_alus):
""" Inputs:
* :rwid: bit width of register file(s) - both FP and INT
self.imm_i = Signal(rwid, reset_less=True)
# Int ALUs
- add = ALU(rwid)
- sub = ALU(rwid)
- mul = ALU(rwid)
- shf = ALU(rwid)
+ alus = []
+ for i in range(n_alus):
+ alus.append(ALU(rwid))
units = []
- for alu in [add, sub, mul, shf]:
+ for alu in alus:
aluopwid = 3 # extra bit for immediate mode
units.append(ComputationUnitNoDelay(rwid, aluopwid, alu))
m = CompUnitsBase.elaborate(self, platform)
comb = m.d.comb
- # hand the same operation to all units, only lower 2 bits though
+ # hand the same operation to all units, only lower 3 bits though
for alu in self.units:
comb += alu.oper_i[0:3].eq(self.oper_i)
comb += alu.imm_i.eq(self.imm_i)
self.src1_rsel_o = Signal(n_regs, reset_less=True) # src1 reg (bot)
self.src2_rsel_o = Signal(n_regs, reset_less=True) # src2 reg (bot)
- self.req_rel_i = Signal(n_int_alus, reset_less = True)
self.readable_o = Signal(n_int_alus, reset_less=True)
self.writable_o = Signal(n_int_alus, reset_less=True)
self.go_rd_i = Signal(n_int_alus, reset_less=True)
self.go_wr_i = Signal(n_int_alus, reset_less=True)
self.go_die_i = Signal(n_int_alus, reset_less=True)
- self.req_rel_o = Signal(n_int_alus, reset_less=True)
self.fn_issue_i = Signal(n_int_alus, reset_less=True)
# Note: FURegs wr_pend_o is also outputted from here, for use in WaWGrid
self.fpregs = RegFileArray(rwid, n_regs)
# issue q needs to get at these
- self.aluissue = IssueUnitGroup(4)
+ self.aluissue = IssueUnitGroup(2)
+ self.lsissue = IssueUnitGroup(2)
self.brissue = IssueUnitGroup(1)
# and these
self.alu_oper_i = Signal(4, reset_less=True)
self.alu_imm_i = Signal(rwid, reset_less=True)
self.br_oper_i = Signal(4, reset_less=True)
self.br_imm_i = Signal(rwid, reset_less=True)
+ self.ls_oper_i = Signal(4, reset_less=True)
+ self.ls_imm_i = Signal(rwid, reset_less=True)
# inputs
self.int_dest_i = Signal(max=n_regs, reset_less=True) # Dest R# in
fp_src1 = self.fpregs.read_port("src1")
fp_src2 = self.fpregs.read_port("src2")
- # Int ALUs and Comp Units
+ # Int ALUs and BR ALUs
n_int_alus = 5
- cua = CompUnitALUs(self.rwid, 3)
- cub = CompUnitBR(self.rwid, 3)
- m.submodules.cu = cu = CompUnitsBase(self.rwid, [cua, cub])
+ cua = CompUnitALUs(self.rwid, 3, n_alus=self.aluissue.n_insns)
+ cub = CompUnitBR(self.rwid, 3) # 1 BR ALUs
+
+ # LDST Comp Units
+ n_ldsts = 2
+ cul = CompUnitLDSTs(self.rwid, 4, self.lsissue.n_insns, None)
+
+ # Comp Units
+ m.submodules.cu = cu = CompUnitsBase(self.rwid, [cua, cul, cub])
bgt = cub.bgt # get at the branch computation unit
br1 = cub.br1
# Int FUs
m.submodules.intfus = intfus = FunctionUnits(self.n_regs, n_int_alus)
+ # Memory FUs
+ m.submodules.memfus = memfus = MemFunctionUnits(n_ldsts, 5)
+
# Count of number of FUs
n_intfus = n_int_alus
n_fp_fus = 0 # for now
- # Integer Priority Picker 1: Adder + Subtractor
- intpick1 = GroupPicker(n_intfus) # picks between add, sub, mul and shf
+ # Integer Priority Picker 1: Adder + Subtractor (and LD/ST)
+ intpick1 = GroupPicker(n_intfus) # picks 1 reader and 1 writer to intreg
m.submodules.intpick1 = intpick1
# INT/FP Issue Unit
regdecode = RegDecode(self.n_regs)
m.submodules.regdecode = regdecode
- issueunit = IssueUnitArray([self.aluissue, self.brissue])
+ issueunit = IssueUnitArray([self.aluissue, self.lsissue, self.brissue])
m.submodules.issueunit = issueunit
# Shadow Matrix. currently n_intfus shadows, to be used for
comb += cua.imm_i.eq(self.alu_imm_i)
comb += cub.oper_i.eq(self.br_oper_i)
comb += cub.imm_i.eq(self.br_imm_i)
+ comb += cul.oper_i.eq(self.ls_oper_i)
+ comb += cul.imm_i.eq(self.ls_imm_i)
# TODO: issueunit.f (FP)
with m.If(br1.issue_i):
sync += bspec.active_i.eq(1)
with m.If(self.branch_succ_i):
- comb += bspec.good_i.eq(fn_issue_o & 0x1f)
+ comb += bspec.good_i.eq(fn_issue_o & 0x1f) # XXX MAGIC CONSTANT
with m.If(self.branch_fail_i):
- comb += bspec.fail_i.eq(fn_issue_o & 0x1f)
+ comb += bspec.fail_i.eq(fn_issue_o & 0x1f) # XXX MAGIC CONSTANT
# branch is active (TODO: a better signal: this is over-using the
# go_write signal - actually the branch should not be "writing")
iq = InstructionQ(self.rwid, self.opw, self.qlen, self.n_in, self.n_out)
sc = Scoreboard(self.rwid, self.n_regs)
+ mem = TestMemory(self.rwid, 8) # not too big, takes too long
m.submodules.iq = iq
m.submodules.sc = sc
+ m.submodules.mem = mem
# get at the regfile for testing
self.intregs = sc.intregs
# in "waiting" state
wait_issue_br = Signal()
wait_issue_alu = Signal()
+ wait_issue_ls = Signal()
- with m.If(wait_issue_br | wait_issue_alu):
+ with m.If(wait_issue_br | wait_issue_alu | wait_issue_ls):
# set instruction pop length to 1 if the unit accepted
+ with m.If(wait_issue_ls & (sc.lsissue.fn_issue_o != 0)):
+ with m.If(iq.qlen_o != 0):
+ comb += iq.n_sub_i.eq(1)
with m.If(wait_issue_br & (sc.brissue.fn_issue_o != 0)):
with m.If(iq.qlen_o != 0):
comb += iq.n_sub_i.eq(1)
# choose a Function-Unit-Group
with m.If((op & (0x3<<2)) != 0): # branch
- comb += sc.brissue.insn_i.eq(1)
comb += sc.br_oper_i.eq(Cat(op[0:2], opi))
comb += sc.br_imm_i.eq(imm)
+ comb += sc.brissue.insn_i.eq(1)
comb += wait_issue_br.eq(1)
- with m.Else(): # alu
- comb += sc.aluissue.insn_i.eq(1)
+ with m.Elif((op & (0x3<<4)) != 0): # ld/st
+ # see compldst.py
+ # bit 0: ADD/SUB
+ # bit 1: immed
+ # bit 4: LD
+ # bit 5: ST
+ comb += sc.ls_oper_i.eq(Cat(op[0], opi[0], op[4:6]))
+ comb += sc.ls_imm_i.eq(imm)
+ comb += sc.lsissue.insn_i.eq(1)
+ comb += wait_issue_ls.eq(1)
+ with m.Else(): # alu
comb += sc.alu_oper_i.eq(Cat(op[0:2], opi))
comb += sc.alu_imm_i.eq(imm)
+ comb += sc.aluissue.insn_i.eq(1)
comb += wait_issue_alu.eq(1)
# XXX TODO
IBEQ = 6
IBNE = 7
+
class RegSim:
def __init__(self, rwidth, nregs):
self.rwidth = rwidth
val = int(src1 == src2)
elif op == IBNE:
val = int(src1 != src2)
+ else:
+ return 0 # LD/ST TODO
val &= maxbits
self.setval(dest, val)
return val
def disable_issue(dut):
yield dut.aluissue.insn_i.eq(0)
yield dut.brissue.insn_i.eq(0)
+ yield dut.lsissue.insn_i.eq(0)
def wait_for_issue(dut, dut_issue):
seed(0)
- for i in range(50):
+ for i in range(1):
# set random values in the registers
for i in range(1, dut.n_regs):
# create some instructions (some random, some regression tests)
instrs = []
- if True:
+ if False:
instrs = create_random_ops(dut, 15, True, 4)
+ if True: # LD test (with immediate)
+ instrs.append( (1, 2, 2, 0x10, 1, 20, (0, 0)) )
+
if False:
instrs.append( (1, 2, 2, 1, 1, 20, (0, 0)) )
projects / soc.git / blobdiff