bit of munging of Makefile, new targets

[soc.git] / Makefile

diff --git a/Makefile b/Makefile
index a0530bffb6f169acc2d24b3d04b91ea4fccd8997..b7d73ee58c280d298136d9773db7bffa972747c9 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,13 +1,62 @@
 PYTHON3 ?= "python3"
 
+.PHONY: help Makefile gitupdate install run_sim test htmlupload
+
 gitupdate:
        git submodule init
-       git submodule update --recursive
+       git submodule update --init --recursive --remote
 
-install:
-       python3 setup.py develop # yes, develop, not install
+mkpinmux:
+       ./mkpinmux.sh
+       cp pinmux/ls180/ls180_pins.py src/soc/debug
+       cp pinmux/ls180/ls180_pins.py src/soc/litex/florent/libresoc
+
+install: gitupdate develop mkpinmux svanalysis
+
+pywriter:
        python3 src/soc/decoder/pseudo/pywriter.py
 
+svanalysis:
+       python3 libreriscv/openpower/sv_analysis.py
+
+develop:
+       python3 setup.py develop # yes, develop, not install
+
+# build and run libresoc litex simulation
+run_sim:
+       python3 src/soc/simple/issuer_verilog.py --disable-svp64 \
+                       src/soc/litex/florent/libresoc/libresoc.v
+       python3 src/soc/litex/florent/sim.py --cpu=libresoc
+
+# and with test gpio (useful for XICS IRC testing)
+testgpio_run_sim:
+       python3 src/soc/simple/issuer_verilog.py \
+                       src/soc/litex/florent/libresoc/libresoc.v \
+                       --enable-testgpio
+       python3 src/soc/litex/florent/sim.py --cpu=libresoc \
+                       --variant=standardjtagtestgpio
+
+ls180_verilog:
+       python3 src/soc/simple/issuer_verilog.py \
+               --debug=jtag --enable-core --enable-pll \
+               --enable-xics --disable-svp64 \
+                       src/soc/litex/florent/libresoc/libresoc.v
+
+ls180_4k_verilog:
+       python3 src/soc/simple/issuer_verilog.py \
+               --debug=jtag --enable-core --enable-pll \
+               --enable-xics --enable-sram4x4kblock --disable-svp64 \
+                       src/soc/litex/florent/libresoc/libresoc.v
+
+# build the litex libresoc SoC without 4k SRAMs
+ls180_4ksram_verilog_build: ls180_verilog
+       make -C soc/soc/litex/florent ls1804k
+
+# build the litex libresoc SoC with 4k SRAMs
+ls180_4ksram_verilog_build: ls180_4k_verilog
+       make -C soc/soc/litex/florent ls1804k
+
+# testing (usually done at install time)
 test: install
        python3 setup.py test # could just run nosetest3...
 
@@ -25,15 +74,16 @@ BUILDDIR      = build
 help:
        @$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
 
-.PHONY: help Makefile
+# copies all documentation to libre-soc (libre-soc admins only)
+htmlupload: clean html
+       rsync -HPavz --delete build/html/* \
+        libre-soc.org:/var/www/libre-soc.org/docs/soc/
 
 # Catch-all target: route all unknown targets to Sphinx using the new
 # "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
 %: Makefile
+       echo "catch-all falling through to sphinx for document building"
        mkdir -p "$(SOURCEDIR)"/src/gen
        sphinx-apidoc --ext-autodoc -o "$(SOURCEDIR)"/src/gen ./src/soc
        @$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
 
-htmlupload: clean html
-       rsync -HPavz --delete build/html/* \
-        libre-soc.org:/var/www/libre-soc.org/docs/soc/