/*============================================================================
-This C header file is part of the SoftFloat IEC/IEEE Floating-point Arithmetic
-Package, Release 2b.
+This C header file is part of the SoftFloat IEEE Floating-Point Arithmetic
+Package, Release 3d, by John R. Hauser.
-Written by John R. Hauser. This work was made possible in part by the
-International Computer Science Institute, located at Suite 600, 1947 Center
-Street, Berkeley, California 94704. Funding was partially provided by the
-National Science Foundation under grant MIP-9311980. The original version
-of this code was written as part of a project to build a fixed-point vector
-processor in collaboration with the University of California at Berkeley,
-overseen by Profs. Nelson Morgan and John Wawrzynek. More information
-is available through the Web page `http://www.cs.berkeley.edu/~jhauser/
-arithmetic/SoftFloat.html'.
+Copyright 2011, 2012, 2013, 2014, 2015, 2016, 2017 The Regents of the
+University of California. All rights reserved.
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort has
-been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES
-RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS
-AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES,
-COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE
-EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE
-INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR
-OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE.
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
-Derivative works are acceptable, even for commercial purposes, so long as
-(1) the source code for the derivative work includes prominent notice that
-the work is derivative, and (2) the source code includes prominent notice with
-these four paragraphs for those parts of this code that are retained.
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions, and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions, and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+ 3. Neither the name of the University nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS", AND ANY
+EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
+DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
=============================================================================*/
-/*----------------------------------------------------------------------------
-| The macro `FLOATX80' must be defined to enable the extended double-precision
-| floating-point format `floatx80'. If this macro is not defined, the
-| `floatx80' type will not be defined, and none of the functions that either
-| input or output the `floatx80' type will be defined. The same applies to
-| the `FLOAT128' macro and the quadruple-precision format `float128'.
-*----------------------------------------------------------------------------*/
-#define FLOATX80
-#define FLOAT128
-/*----------------------------------------------------------------------------
-| Software IEC/IEEE floating-point types.
-*----------------------------------------------------------------------------*/
-typedef unsigned int float32;
-typedef unsigned long long float64;
-#ifdef FLOATX80
-typedef struct {
- unsigned short high;
- unsigned long long low;
-} floatx80;
+/*============================================================================
+| Note: If SoftFloat is made available as a general library for programs to
+| use, it is strongly recommended that a platform-specific version of this
+| header, "softfloat.h", be created that folds in "softfloat_types.h" and that
+| eliminates all dependencies on compile-time macros.
+*============================================================================*/
+
+
+#ifndef softfloat_h
+#define softfloat_h 1
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "softfloat_types.h"
+
+#ifndef THREAD_LOCAL
+#define THREAD_LOCAL
#endif
-#ifdef FLOAT128
-typedef struct {
- unsigned long long high, low;
-} float128;
+
+#ifdef __cplusplus
+extern "C" {
#endif
/*----------------------------------------------------------------------------
-| Software IEC/IEEE floating-point underflow tininess-detection mode.
+| Software floating-point underflow tininess-detection mode.
*----------------------------------------------------------------------------*/
-extern int float_detect_tininess;
+extern THREAD_LOCAL uint_fast8_t softfloat_detectTininess;
enum {
- float_tininess_after_rounding = 0,
- float_tininess_before_rounding = 1
+ softfloat_tininess_beforeRounding = 0,
+ softfloat_tininess_afterRounding = 1
};
/*----------------------------------------------------------------------------
-| Software IEC/IEEE floating-point rounding mode.
+| Software floating-point rounding mode. (Mode "odd" is supported only if
+| SoftFloat is compiled with macro 'SOFTFLOAT_ROUND_ODD' defined.)
*----------------------------------------------------------------------------*/
-extern int float_rounding_mode;
+extern THREAD_LOCAL uint_fast8_t softfloat_roundingMode;
enum {
- float_round_nearest_even = 0,
- float_round_to_zero = 1,
- float_round_up = 2,
- float_round_down = 3
+ softfloat_round_near_even = 0,
+ softfloat_round_minMag = 1,
+ softfloat_round_min = 2,
+ softfloat_round_max = 3,
+ softfloat_round_near_maxMag = 4,
+ softfloat_round_odd = 5
};
/*----------------------------------------------------------------------------
-| Software IEC/IEEE floating-point exception flags.
+| Software floating-point exception flags.
*----------------------------------------------------------------------------*/
-extern int float_exception_flags;
+extern THREAD_LOCAL uint_fast8_t softfloat_exceptionFlags;
enum {
- float_flag_inexact = 1,
- float_flag_divbyzero = 2,
- float_flag_underflow = 4,
- float_flag_overflow = 8,
- float_flag_invalid = 16
+ softfloat_flag_inexact = 1,
+ softfloat_flag_underflow = 2,
+ softfloat_flag_overflow = 4,
+ softfloat_flag_infinite = 8,
+ softfloat_flag_invalid = 16
};
/*----------------------------------------------------------------------------
-| Routine to raise any or all of the software IEC/IEEE floating-point
-| exception flags.
+| Routine to raise any or all of the software floating-point exception flags.
*----------------------------------------------------------------------------*/
-void float_raise( int );
+void softfloat_raiseFlags( uint_fast8_t );
/*----------------------------------------------------------------------------
-| Software IEC/IEEE integer-to-floating-point conversion routines.
+| Integer-to-floating-point conversion routines.
*----------------------------------------------------------------------------*/
-float32 int32_to_float32( int );
-float64 int32_to_float64( int );
-#ifdef FLOATX80
-floatx80 int32_to_floatx80( int );
+float16_t ui32_to_f16( uint32_t );
+float32_t ui32_to_f32( uint32_t );
+float64_t ui32_to_f64( uint32_t );
+#ifdef SOFTFLOAT_FAST_INT64
+extFloat80_t ui32_to_extF80( uint32_t );
+float128_t ui32_to_f128( uint32_t );
#endif
-#ifdef FLOAT128
-float128 int32_to_float128( int );
+void ui32_to_extF80M( uint32_t, extFloat80_t * );
+void ui32_to_f128M( uint32_t, float128_t * );
+float16_t ui64_to_f16( uint64_t );
+float32_t ui64_to_f32( uint64_t );
+float64_t ui64_to_f64( uint64_t );
+#ifdef SOFTFLOAT_FAST_INT64
+extFloat80_t ui64_to_extF80( uint64_t );
+float128_t ui64_to_f128( uint64_t );
#endif
-float32 int64_to_float32( long long );
-float64 int64_to_float64( long long );
-#ifdef FLOATX80
-floatx80 int64_to_floatx80( long long );
+void ui64_to_extF80M( uint64_t, extFloat80_t * );
+void ui64_to_f128M( uint64_t, float128_t * );
+float16_t i32_to_f16( int32_t );
+float32_t i32_to_f32( int32_t );
+float64_t i32_to_f64( int32_t );
+#ifdef SOFTFLOAT_FAST_INT64
+extFloat80_t i32_to_extF80( int32_t );
+float128_t i32_to_f128( int32_t );
#endif
-#ifdef FLOAT128
-float128 int64_to_float128( long long );
+void i32_to_extF80M( int32_t, extFloat80_t * );
+void i32_to_f128M( int32_t, float128_t * );
+float16_t i64_to_f16( int64_t );
+float32_t i64_to_f32( int64_t );
+float64_t i64_to_f64( int64_t );
+#ifdef SOFTFLOAT_FAST_INT64
+extFloat80_t i64_to_extF80( int64_t );
+float128_t i64_to_f128( int64_t );
#endif
+void i64_to_extF80M( int64_t, extFloat80_t * );
+void i64_to_f128M( int64_t, float128_t * );
/*----------------------------------------------------------------------------
-| Software IEC/IEEE single-precision conversion routines.
+| 16-bit (half-precision) floating-point operations.
*----------------------------------------------------------------------------*/
-int float32_to_int32( float32 );
-int float32_to_int32_round_to_zero( float32 );
-long long float32_to_int64( float32 );
-long long float32_to_int64_round_to_zero( float32 );
-float64 float32_to_float64( float32 );
-#ifdef FLOATX80
-floatx80 float32_to_floatx80( float32 );
-#endif
-#ifdef FLOAT128
-float128 float32_to_float128( float32 );
+uint_fast32_t f16_to_ui32( float16_t, uint_fast8_t, bool );
+uint_fast64_t f16_to_ui64( float16_t, uint_fast8_t, bool );
+int_fast32_t f16_to_i32( float16_t, uint_fast8_t, bool );
+int_fast64_t f16_to_i64( float16_t, uint_fast8_t, bool );
+uint_fast32_t f16_to_ui32_r_minMag( float16_t, bool );
+uint_fast64_t f16_to_ui64_r_minMag( float16_t, bool );
+int_fast32_t f16_to_i32_r_minMag( float16_t, bool );
+int_fast64_t f16_to_i64_r_minMag( float16_t, bool );
+float32_t f16_to_f32( float16_t );
+float64_t f16_to_f64( float16_t );
+#ifdef SOFTFLOAT_FAST_INT64
+extFloat80_t f16_to_extF80( float16_t );
+float128_t f16_to_f128( float16_t );
#endif
+void f16_to_extF80M( float16_t, extFloat80_t * );
+void f16_to_f128M( float16_t, float128_t * );
+float16_t f16_roundToInt( float16_t, uint_fast8_t, bool );
+float16_t f16_add( float16_t, float16_t );
+float16_t f16_sub( float16_t, float16_t );
+float16_t f16_mul( float16_t, float16_t );
+float16_t f16_mulAdd( float16_t, float16_t, float16_t );
+float16_t f16_div( float16_t, float16_t );
+float16_t f16_rem( float16_t, float16_t );
+float16_t f16_sqrt( float16_t );
+bool f16_eq( float16_t, float16_t );
+bool f16_le( float16_t, float16_t );
+bool f16_lt( float16_t, float16_t );
+bool f16_eq_signaling( float16_t, float16_t );
+bool f16_le_quiet( float16_t, float16_t );
+bool f16_lt_quiet( float16_t, float16_t );
+bool f16_isSignalingNaN( float16_t );
/*----------------------------------------------------------------------------
-| Software IEC/IEEE single-precision operations.
+| 32-bit (single-precision) floating-point operations.
*----------------------------------------------------------------------------*/
-float32 float32_round_to_int( float32 );
-float32 float32_add( float32, float32 );
-float32 float32_sub( float32, float32 );
-float32 float32_mul( float32, float32 );
-float32 float32_div( float32, float32 );
-float32 float32_rem( float32, float32 );
-float32 float32_sqrt( float32 );
-int float32_eq( float32, float32 );
-int float32_le( float32, float32 );
-int float32_lt( float32, float32 );
-int float32_eq_signaling( float32, float32 );
-int float32_le_quiet( float32, float32 );
-int float32_lt_quiet( float32, float32 );
-int float32_is_signaling_nan( float32 );
-
-/*----------------------------------------------------------------------------
-| Software IEC/IEEE double-precision conversion routines.
-*----------------------------------------------------------------------------*/
-int float64_to_int32( float64 );
-int float64_to_int32_round_to_zero( float64 );
-long long float64_to_int64( float64 );
-long long float64_to_int64_round_to_zero( float64 );
-float32 float64_to_float32( float64 );
-#ifdef FLOATX80
-floatx80 float64_to_floatx80( float64 );
-#endif
-#ifdef FLOAT128
-float128 float64_to_float128( float64 );
+uint_fast32_t f32_to_ui32( float32_t, uint_fast8_t, bool );
+uint_fast64_t f32_to_ui64( float32_t, uint_fast8_t, bool );
+int_fast32_t f32_to_i32( float32_t, uint_fast8_t, bool );
+int_fast64_t f32_to_i64( float32_t, uint_fast8_t, bool );
+uint_fast32_t f32_to_ui32_r_minMag( float32_t, bool );
+uint_fast64_t f32_to_ui64_r_minMag( float32_t, bool );
+int_fast32_t f32_to_i32_r_minMag( float32_t, bool );
+int_fast64_t f32_to_i64_r_minMag( float32_t, bool );
+float16_t f32_to_f16( float32_t );
+float64_t f32_to_f64( float32_t );
+#ifdef SOFTFLOAT_FAST_INT64
+extFloat80_t f32_to_extF80( float32_t );
+float128_t f32_to_f128( float32_t );
#endif
+void f32_to_extF80M( float32_t, extFloat80_t * );
+void f32_to_f128M( float32_t, float128_t * );
+float32_t f32_roundToInt( float32_t, uint_fast8_t, bool );
+float32_t f32_add( float32_t, float32_t );
+float32_t f32_sub( float32_t, float32_t );
+float32_t f32_mul( float32_t, float32_t );
+float32_t f32_mulAdd( float32_t, float32_t, float32_t );
+float32_t f32_div( float32_t, float32_t );
+float32_t f32_rem( float32_t, float32_t );
+float32_t f32_sqrt( float32_t );
+bool f32_eq( float32_t, float32_t );
+bool f32_le( float32_t, float32_t );
+bool f32_lt( float32_t, float32_t );
+bool f32_eq_signaling( float32_t, float32_t );
+bool f32_le_quiet( float32_t, float32_t );
+bool f32_lt_quiet( float32_t, float32_t );
+bool f32_isSignalingNaN( float32_t );
+uint_fast16_t f32_classify( float32_t );
/*----------------------------------------------------------------------------
-| Software IEC/IEEE double-precision operations.
+| 64-bit (double-precision) floating-point operations.
*----------------------------------------------------------------------------*/
-float64 float64_round_to_int( float64 );
-float64 float64_add( float64, float64 );
-float64 float64_sub( float64, float64 );
-float64 float64_mul( float64, float64 );
-float64 float64_div( float64, float64 );
-float64 float64_rem( float64, float64 );
-float64 float64_sqrt( float64 );
-int float64_eq( float64, float64 );
-int float64_le( float64, float64 );
-int float64_lt( float64, float64 );
-int float64_eq_signaling( float64, float64 );
-int float64_le_quiet( float64, float64 );
-int float64_lt_quiet( float64, float64 );
-int float64_is_signaling_nan( float64 );
-
-#ifdef FLOATX80
-
-/*----------------------------------------------------------------------------
-| Software IEC/IEEE extended double-precision conversion routines.
-*----------------------------------------------------------------------------*/
-int floatx80_to_int32( floatx80 );
-int floatx80_to_int32_round_to_zero( floatx80 );
-long long floatx80_to_int64( floatx80 );
-long long floatx80_to_int64_round_to_zero( floatx80 );
-float32 floatx80_to_float32( floatx80 );
-float64 floatx80_to_float64( floatx80 );
-#ifdef FLOAT128
-float128 floatx80_to_float128( floatx80 );
+uint_fast32_t f64_to_ui32( float64_t, uint_fast8_t, bool );
+uint_fast64_t f64_to_ui64( float64_t, uint_fast8_t, bool );
+int_fast32_t f64_to_i32( float64_t, uint_fast8_t, bool );
+int_fast64_t f64_to_i64( float64_t, uint_fast8_t, bool );
+uint_fast32_t f64_to_ui32_r_minMag( float64_t, bool );
+uint_fast64_t f64_to_ui64_r_minMag( float64_t, bool );
+int_fast32_t f64_to_i32_r_minMag( float64_t, bool );
+int_fast64_t f64_to_i64_r_minMag( float64_t, bool );
+float16_t f64_to_f16( float64_t );
+float32_t f64_to_f32( float64_t );
+#ifdef SOFTFLOAT_FAST_INT64
+extFloat80_t f64_to_extF80( float64_t );
+float128_t f64_to_f128( float64_t );
#endif
+void f64_to_extF80M( float64_t, extFloat80_t * );
+void f64_to_f128M( float64_t, float128_t * );
+float64_t f64_roundToInt( float64_t, uint_fast8_t, bool );
+float64_t f64_add( float64_t, float64_t );
+float64_t f64_sub( float64_t, float64_t );
+float64_t f64_mul( float64_t, float64_t );
+float64_t f64_mulAdd( float64_t, float64_t, float64_t );
+float64_t f64_div( float64_t, float64_t );
+float64_t f64_rem( float64_t, float64_t );
+float64_t f64_sqrt( float64_t );
+bool f64_eq( float64_t, float64_t );
+bool f64_le( float64_t, float64_t );
+bool f64_lt( float64_t, float64_t );
+bool f64_eq_signaling( float64_t, float64_t );
+bool f64_le_quiet( float64_t, float64_t );
+bool f64_lt_quiet( float64_t, float64_t );
+bool f64_isSignalingNaN( float64_t );
+uint_fast16_t f64_classify( float64_t );
/*----------------------------------------------------------------------------
-| Software IEC/IEEE extended double-precision rounding precision. Valid
-| values are 32, 64, and 80.
+| Rounding precision for 80-bit extended double-precision floating-point.
+| Valid values are 32, 64, and 80.
*----------------------------------------------------------------------------*/
-extern int floatx80_rounding_precision;
+extern THREAD_LOCAL uint_fast8_t extF80_roundingPrecision;
/*----------------------------------------------------------------------------
-| Software IEC/IEEE extended double-precision operations.
+| 80-bit extended double-precision floating-point operations.
*----------------------------------------------------------------------------*/
-floatx80 floatx80_round_to_int( floatx80 );
-floatx80 floatx80_add( floatx80, floatx80 );
-floatx80 floatx80_sub( floatx80, floatx80 );
-floatx80 floatx80_mul( floatx80, floatx80 );
-floatx80 floatx80_div( floatx80, floatx80 );
-floatx80 floatx80_rem( floatx80, floatx80 );
-floatx80 floatx80_sqrt( floatx80 );
-int floatx80_eq( floatx80, floatx80 );
-int floatx80_le( floatx80, floatx80 );
-int floatx80_lt( floatx80, floatx80 );
-int floatx80_eq_signaling( floatx80, floatx80 );
-int floatx80_le_quiet( floatx80, floatx80 );
-int floatx80_lt_quiet( floatx80, floatx80 );
-int floatx80_is_signaling_nan( floatx80 );
-
+#ifdef SOFTFLOAT_FAST_INT64
+uint_fast32_t extF80_to_ui32( extFloat80_t, uint_fast8_t, bool );
+uint_fast64_t extF80_to_ui64( extFloat80_t, uint_fast8_t, bool );
+int_fast32_t extF80_to_i32( extFloat80_t, uint_fast8_t, bool );
+int_fast64_t extF80_to_i64( extFloat80_t, uint_fast8_t, bool );
+uint_fast32_t extF80_to_ui32_r_minMag( extFloat80_t, bool );
+uint_fast64_t extF80_to_ui64_r_minMag( extFloat80_t, bool );
+int_fast32_t extF80_to_i32_r_minMag( extFloat80_t, bool );
+int_fast64_t extF80_to_i64_r_minMag( extFloat80_t, bool );
+float16_t extF80_to_f16( extFloat80_t );
+float32_t extF80_to_f32( extFloat80_t );
+float64_t extF80_to_f64( extFloat80_t );
+float128_t extF80_to_f128( extFloat80_t );
+extFloat80_t extF80_roundToInt( extFloat80_t, uint_fast8_t, bool );
+extFloat80_t extF80_add( extFloat80_t, extFloat80_t );
+extFloat80_t extF80_sub( extFloat80_t, extFloat80_t );
+extFloat80_t extF80_mul( extFloat80_t, extFloat80_t );
+extFloat80_t extF80_div( extFloat80_t, extFloat80_t );
+extFloat80_t extF80_rem( extFloat80_t, extFloat80_t );
+extFloat80_t extF80_sqrt( extFloat80_t );
+bool extF80_eq( extFloat80_t, extFloat80_t );
+bool extF80_le( extFloat80_t, extFloat80_t );
+bool extF80_lt( extFloat80_t, extFloat80_t );
+bool extF80_eq_signaling( extFloat80_t, extFloat80_t );
+bool extF80_le_quiet( extFloat80_t, extFloat80_t );
+bool extF80_lt_quiet( extFloat80_t, extFloat80_t );
+bool extF80_isSignalingNaN( extFloat80_t );
#endif
-
-#ifdef FLOAT128
+uint_fast32_t extF80M_to_ui32( const extFloat80_t *, uint_fast8_t, bool );
+uint_fast64_t extF80M_to_ui64( const extFloat80_t *, uint_fast8_t, bool );
+int_fast32_t extF80M_to_i32( const extFloat80_t *, uint_fast8_t, bool );
+int_fast64_t extF80M_to_i64( const extFloat80_t *, uint_fast8_t, bool );
+uint_fast32_t extF80M_to_ui32_r_minMag( const extFloat80_t *, bool );
+uint_fast64_t extF80M_to_ui64_r_minMag( const extFloat80_t *, bool );
+int_fast32_t extF80M_to_i32_r_minMag( const extFloat80_t *, bool );
+int_fast64_t extF80M_to_i64_r_minMag( const extFloat80_t *, bool );
+float16_t extF80M_to_f16( const extFloat80_t * );
+float32_t extF80M_to_f32( const extFloat80_t * );
+float64_t extF80M_to_f64( const extFloat80_t * );
+void extF80M_to_f128M( const extFloat80_t *, float128_t * );
+void
+ extF80M_roundToInt(
+ const extFloat80_t *, uint_fast8_t, bool, extFloat80_t * );
+void extF80M_add( const extFloat80_t *, const extFloat80_t *, extFloat80_t * );
+void extF80M_sub( const extFloat80_t *, const extFloat80_t *, extFloat80_t * );
+void extF80M_mul( const extFloat80_t *, const extFloat80_t *, extFloat80_t * );
+void extF80M_div( const extFloat80_t *, const extFloat80_t *, extFloat80_t * );
+void extF80M_rem( const extFloat80_t *, const extFloat80_t *, extFloat80_t * );
+void extF80M_sqrt( const extFloat80_t *, extFloat80_t * );
+bool extF80M_eq( const extFloat80_t *, const extFloat80_t * );
+bool extF80M_le( const extFloat80_t *, const extFloat80_t * );
+bool extF80M_lt( const extFloat80_t *, const extFloat80_t * );
+bool extF80M_eq_signaling( const extFloat80_t *, const extFloat80_t * );
+bool extF80M_le_quiet( const extFloat80_t *, const extFloat80_t * );
+bool extF80M_lt_quiet( const extFloat80_t *, const extFloat80_t * );
+bool extF80M_isSignalingNaN( const extFloat80_t * );
/*----------------------------------------------------------------------------
-| Software IEC/IEEE quadruple-precision conversion routines.
+| 128-bit (quadruple-precision) floating-point operations.
*----------------------------------------------------------------------------*/
-int float128_to_int32( float128 );
-int float128_to_int32_round_to_zero( float128 );
-long long float128_to_int64( float128 );
-long long float128_to_int64_round_to_zero( float128 );
-float32 float128_to_float32( float128 );
-float64 float128_to_float64( float128 );
-#ifdef FLOATX80
-floatx80 float128_to_floatx80( float128 );
+#ifdef SOFTFLOAT_FAST_INT64
+uint_fast32_t f128_to_ui32( float128_t, uint_fast8_t, bool );
+uint_fast64_t f128_to_ui64( float128_t, uint_fast8_t, bool );
+int_fast32_t f128_to_i32( float128_t, uint_fast8_t, bool );
+int_fast64_t f128_to_i64( float128_t, uint_fast8_t, bool );
+uint_fast32_t f128_to_ui32_r_minMag( float128_t, bool );
+uint_fast64_t f128_to_ui64_r_minMag( float128_t, bool );
+int_fast32_t f128_to_i32_r_minMag( float128_t, bool );
+int_fast64_t f128_to_i64_r_minMag( float128_t, bool );
+float16_t f128_to_f16( float128_t );
+float32_t f128_to_f32( float128_t );
+float64_t f128_to_f64( float128_t );
+extFloat80_t f128_to_extF80( float128_t );
+float128_t f128_roundToInt( float128_t, uint_fast8_t, bool );
+float128_t f128_add( float128_t, float128_t );
+float128_t f128_sub( float128_t, float128_t );
+float128_t f128_mul( float128_t, float128_t );
+float128_t f128_mulAdd( float128_t, float128_t, float128_t );
+float128_t f128_div( float128_t, float128_t );
+float128_t f128_rem( float128_t, float128_t );
+float128_t f128_sqrt( float128_t );
+bool f128_eq( float128_t, float128_t );
+bool f128_le( float128_t, float128_t );
+bool f128_lt( float128_t, float128_t );
+bool f128_eq_signaling( float128_t, float128_t );
+bool f128_le_quiet( float128_t, float128_t );
+bool f128_lt_quiet( float128_t, float128_t );
+bool f128_isSignalingNaN( float128_t );
+uint_fast16_t f128_classify( float128_t );
#endif
+uint_fast32_t f128M_to_ui32( const float128_t *, uint_fast8_t, bool );
+uint_fast64_t f128M_to_ui64( const float128_t *, uint_fast8_t, bool );
+int_fast32_t f128M_to_i32( const float128_t *, uint_fast8_t, bool );
+int_fast64_t f128M_to_i64( const float128_t *, uint_fast8_t, bool );
+uint_fast32_t f128M_to_ui32_r_minMag( const float128_t *, bool );
+uint_fast64_t f128M_to_ui64_r_minMag( const float128_t *, bool );
+int_fast32_t f128M_to_i32_r_minMag( const float128_t *, bool );
+int_fast64_t f128M_to_i64_r_minMag( const float128_t *, bool );
+float16_t f128M_to_f16( const float128_t * );
+float32_t f128M_to_f32( const float128_t * );
+float64_t f128M_to_f64( const float128_t * );
+void f128M_to_extF80M( const float128_t *, extFloat80_t * );
+void f128M_roundToInt( const float128_t *, uint_fast8_t, bool, float128_t * );
+void f128M_add( const float128_t *, const float128_t *, float128_t * );
+void f128M_sub( const float128_t *, const float128_t *, float128_t * );
+void f128M_mul( const float128_t *, const float128_t *, float128_t * );
+void
+ f128M_mulAdd(
+ const float128_t *, const float128_t *, const float128_t *, float128_t *
+ );
+void f128M_div( const float128_t *, const float128_t *, float128_t * );
+void f128M_rem( const float128_t *, const float128_t *, float128_t * );
+void f128M_sqrt( const float128_t *, float128_t * );
+bool f128M_eq( const float128_t *, const float128_t * );
+bool f128M_le( const float128_t *, const float128_t * );
+bool f128M_lt( const float128_t *, const float128_t * );
+bool f128M_eq_signaling( const float128_t *, const float128_t * );
+bool f128M_le_quiet( const float128_t *, const float128_t * );
+bool f128M_lt_quiet( const float128_t *, const float128_t * );
+bool f128M_isSignalingNaN( const float128_t * );
-/*----------------------------------------------------------------------------
-| Software IEC/IEEE quadruple-precision operations.
-*----------------------------------------------------------------------------*/
-float128 float128_round_to_int( float128 );
-float128 float128_add( float128, float128 );
-float128 float128_sub( float128, float128 );
-float128 float128_mul( float128, float128 );
-float128 float128_div( float128, float128 );
-float128 float128_rem( float128, float128 );
-float128 float128_sqrt( float128 );
-int float128_eq( float128, float128 );
-int float128_le( float128, float128 );
-int float128_lt( float128, float128 );
-int float128_eq_signaling( float128, float128 );
-int float128_le_quiet( float128, float128 );
-int float128_lt_quiet( float128, float128 );
-int float128_is_signaling_nan( float128 );
+#ifdef __cplusplus
+}
+#endif
#endif
projects / riscv-isa-sim.git / blobdiff