from litex.soc.interconnect import wishbone as wb
from litex.soc.cores.cpu import CPU
-from soc.debug.jtag import Pins # TODO move to suitable location
+from soc.config.pinouts import get_pinspecs
+from soc.debug.jtag import Pins
from c4m.nmigen.jtag.tap import IOType
-from libresoc.ls180io import make_uart, make_gpio
+from libresoc.ls180 import io
from litex.build.generic_platform import ConstraintManager
-CPU_VARIANTS = ["standard", "standard32", "standardjtag", "ls180"]
+CPU_VARIANTS = ["standard", "standard32", "standardjtag",
+ "standardjtagtestgpio", "ls180",
+ "standardjtagnoirq"]
def make_wb_bus(prefix, obj, simple=False):
res['i_%s__%s' % (prefix, i)] = getattr(obj, i)
return res
-def make_wb_slave(prefix, obj):
+def make_wb_slave(prefix, obj, simple=False):
res = {}
- for i in ['stb', 'cyc', 'cti', 'bte', 'we', 'adr', 'dat_w', 'sel']:
+ inpins = ['stb', 'cyc', 'we', 'adr', 'dat_w', 'sel']
+ if not simple:
+ inpins += ['cti', 'bte']
+ for i in inpins:
res['i_%s__%s' % (prefix, i)] = getattr(obj, i)
for o in ['ack', 'err', 'dat_r']:
res['o_%s__%s' % (prefix, o)] = getattr(obj, o)
def make_pad(res, dirn, name, suffix, cpup, iop):
cpud, iod = ('i', 'o') if dirn else ('o', 'i')
- res['%s_%s__core__%s' % (cpud, name, suffix)] = cpup
- res['%s_%s__pad__%s' % (iod, name, suffix)] = iop
+ cname = '%s_%s__core__%s' % (cpud, name, suffix)
+ pname = '%s_%s__pad__%s' % (iod, name, suffix)
+ print ("make pad", name, dirn, cpud, iod, cname, pname, suffix, cpup, iop)
+ res[cname], res[pname] = cpup, iop
+
+def get_field(rec, name):
+ for f in rec.layout:
+ f = f[0]
+ if f.endswith(name):
+ return getattr(rec, f)
def make_jtag_ioconn(res, pin, cpupads, iopads):
- (fn, pin, iotype, pin_name) = pin
+ (fn, pin, iotype, pin_name, scan_idx) = pin
#serial_tx__core__o, serial_rx__pad__i,
+ # special-case sdram_clock
+ if pin == 'clock' and fn == 'sdr':
+ cpu = cpupads['sdram_clock']
+ io = iopads['sdram_clock']
+ else:
+ cpu = cpupads[fn]
+ io = iopads[fn]
print ("cpupads", cpupads)
print ("iopads", iopads)
print ("pin", fn, pin, iotype, pin_name)
- cpu = cpupads[fn]
- io = iopads[fn]
- sigs = []
-
+ print ("cpu fn", cpu)
+ print ("io fn", io)
name = "%s_%s" % (fn, pin)
+ print ("name", name)
+ sigs = []
if iotype in (IOType.In, IOType.Out):
- cpup = getattr(cpu, pin)
- iop = getattr(io, pin)
+ ps = pin.split("_")
+ if pin == 'clock' and fn == 'sdr':
+ cpup = cpu
+ iop = io
+ elif len(ps) == 2 and ps[-1].isdigit():
+ pin, idx = ps
+ idx = int(idx)
+ print ("ps split", pin, idx)
+ cpup = getattr(cpu, pin)[idx]
+ iop = getattr(io, pin)[idx]
+ elif pin.isdigit():
+ idx = int(pin)
+ print ("digit", idx)
+ cpup = cpu[idx]
+ iop = io[idx]
+ else:
+ cpup = getattr(cpu, pin)
+ iop = getattr(io, pin)
if iotype == IOType.Out:
# output from the pad is routed through C4M JTAG and so
elif iotype == IOType.In:
# input to the pad is routed through C4M JTAG and so
# is an *OUTPUT* into core. ls180soc connects this to "real" peripheral
- make_pad(res, False, name, "i", cpup, iop)
+ make_pad(res, True, name, "i", cpup, iop)
elif iotype == IOType.InTriOut:
if fn == 'gpio': # sigh decode GPIO special-case
- idx = int(pin[4:])
- cpup, iop = cpu.i[idx], io.i[idx]
- make_pad(res, False, name, "i", cpup, iop)
- cpup, iop = cpu.o[idx], io.o[idx]
+ idx = int(pin[1:])
+ oe_idx = idx
+ elif fn == 'sdr': # sigh
+ idx = int(pin.split('_')[-1])
+ oe_idx = 0
+ else:
+ idx = 0
+ oe_idx = 0
+ print ("gpio tri", fn, pin, iotype, pin_name, scan_idx, idx)
+ cpup, iop = get_field(cpu, "i")[idx], get_field(io, "i")[idx]
+ make_pad(res, True, name, "i", cpup, iop)
+ cpup, iop = get_field(cpu, "o")[idx], get_field(io, "o")[idx]
make_pad(res, True, name, "o", cpup, iop)
- cpup, iop = cpu.oe[idx], io.oe[idx]
+ cpup, iop = get_field(cpu, "oe")[oe_idx], get_field(io, "oe")[oe_idx]
make_pad(res, True, name, "oe", cpup, iop)
if iotype in (IOType.In, IOType.InTriOut):
self.platform = platform
self.variant = variant
self.reset = Signal()
- self.interrupt = Signal(16)
+
+ irq_en = "noirq" not in variant
+
+ if irq_en:
+ self.interrupt = Signal(16)
if variant == "standard32":
self.data_width = 32
jtag_en = ('jtag' in variant) or variant == 'ls180'
- if variant != "ls180":
+ if "testgpio" in variant:
self.simple_gpio = gpio = wb.Interface(data_width=32, adr_width=30)
if jtag_en:
self.jtag_wb = jtag_wb = wb.Interface(data_width=64, adr_width=29)
+ if "sram4k" in variant or variant == 'ls180':
+ self.srams = srams = []
+ for i in range(4):
+ srams.append(wb.Interface(data_width=64, adr_width=29))
+
self.periph_buses = [ibus, dbus]
self.memory_buses = []
o_busy_o = Signal(), # not connected
o_memerr_o = Signal(), # not connected
o_pc_o = Signal(64), # not connected
+ )
+ if irq_en:
# interrupts
- i_int_level_i = self.interrupt,
-
- )
+ self.cpu_params['i_int_level_i'] = self.interrupt
if jtag_en:
self.cpu_params.update(dict(
o_dmi_ack_o = self.dmi_ack,
))
+ # add clock select, pll output
+ if variant == "ls180":
+ self.pll_18_o = Signal()
+ self.clk_sel = Signal(2)
+ self.pll_lck_o = Signal()
+ self.cpu_params['i_clk_sel_i'] = self.clk_sel
+ self.cpu_params['o_pll_18_o'] = self.pll_18_o
+ self.cpu_params['o_pll_lck_o'] = self.pll_lck_o
+
# add wishbone buses to cpu params
- self.cpu_params.update(make_wb_bus("ibus", ibus))
- self.cpu_params.update(make_wb_bus("dbus", dbus))
- self.cpu_params.update(make_wb_slave("ics_wb", ics))
- self.cpu_params.update(make_wb_slave("icp_wb", icp))
- if variant != "ls180":
+ self.cpu_params.update(make_wb_bus("ibus", ibus, True))
+ self.cpu_params.update(make_wb_bus("dbus", dbus, True))
+ self.cpu_params.update(make_wb_slave("ics_wb", ics, True))
+ self.cpu_params.update(make_wb_slave("icp_wb", icp, True))
+ if "testgpio" in variant:
self.cpu_params.update(make_wb_slave("gpio_wb", gpio))
if jtag_en:
self.cpu_params.update(make_wb_bus("jtag_wb", jtag_wb, simple=True))
+ if "sram4k" in variant or variant == 'ls180':
+ for i, sram in enumerate(srams):
+ self.cpu_params.update(make_wb_slave("sram4k_%d_wb" % i, sram))
+
+ # and set ibus advanced tags to zero (disable)
+ self.cpu_params['i_ibus__cti'] = 0
+ self.cpu_params['i_ibus__bte'] = 0
+ self.cpu_params['i_dbus__cti'] = 0
+ self.cpu_params['i_dbus__bte'] = 0
if variant == 'ls180':
# urr yuk. have to expose iopads / pins from core to litex
# then back again. cut _some_ of that out by connecting
- self.cpuresources = (make_uart('uart', 0),
- make_gpio('gpio', 0, 16))
- self.padresources = (make_uart('uart', 0),
- make_gpio('gpio', 0, 16))
- self.cpu_cm = ConstraintManager(self.cpuresources, [])
- self.pad_cm = ConstraintManager(self.cpuresources, [])
- self.cpupads = {'uart': self.cpu_cm.request('uart', 0),
- 'gpio': self.cpu_cm.request('gpio', 0)}
- self.iopads = {'uart': self.pad_cm.request('uart', 0),
- 'gpio': self.pad_cm.request('gpio', 0)}
-
- p = Pins()
+ self.padresources = io()
+ self.pad_cm = ConstraintManager(self.padresources, [])
+ self.cpupads = {}
+ iopads = {}
+ litexmap = {}
+ subset = {'uart', 'mtwi', 'eint', 'gpio', 'mspi0', 'mspi1',
+ 'pwm', 'sd0', 'sdr'}
+ for periph in subset:
+ origperiph = periph
+ num = None
+ if periph[-1].isdigit():
+ periph, num = periph[:-1], int(periph[-1])
+ print ("periph request", periph, num)
+ if periph == 'mspi':
+ if num == 0:
+ periph, num = 'spimaster', None
+ else:
+ periph, num = 'spisdcard', None
+ elif periph == 'sdr':
+ periph = 'sdram'
+ elif periph == 'mtwi':
+ periph = 'i2c'
+ elif periph == 'sd':
+ periph, num = 'sdcard', None
+ litexmap[origperiph] = (periph, num)
+ self.cpupads[origperiph] = platform.request(periph, num)
+ iopads[origperiph] = self.pad_cm.request(periph, num)
+ if periph == 'sdram':
+ # special-case sdram clock
+ ck = platform.request("sdram_clock")
+ self.cpupads['sdram_clock'] = ck
+ ck = self.pad_cm.request("sdram_clock")
+ iopads['sdram_clock'] = ck
+
+ pinset = get_pinspecs(subset=subset)
+ p = Pins(pinset)
for pin in list(p):
- make_jtag_ioconn(self.cpu_params, pin, self.cpupads,
- self.iopads)
+ make_jtag_ioconn(self.cpu_params, pin, self.cpupads, iopads)
# add verilog sources
self.add_sources(platform)
projects / soc.git / blobdiff