pinmux.git
2018-06-29 Luke Kenneth... set output-only via GPIO direction
2018-06-28 Luke Kenneth... add a check to the spec generator, list pins not found
2018-06-27 Luke Kenneth... remove print statements
2018-06-26 Luke Kenneth... fix bug in dedicated cell type detection
2018-06-26 Luke Kenneth... add comment to mkmux function
2018-06-25 Luke Kenneth... pep8 cleanup
2018-06-25 Luke Kenneth... add comments for priority muxer inputs
2018-06-25 Luke Kenneth... whoops got comments wrong way round
2018-06-25 Luke Kenneth... add in some comments
2018-06-25 Luke Kenneth... add in some comments
2018-06-25 Luke Kenneth... add in some comments
2018-06-25 Luke Kenneth... update test file to match auto-generated
2018-06-25 Luke Kenneth... split out iocells to separate interface, just makes...
2018-06-25 Luke Kenneth... rename ioN_inputval to ioN_cell_in
2018-06-25 Luke Kenneth... remove GenericIOType and FunctionType for now
2018-06-25 Luke Kenneth... change enabled mode, to look lke test output
2018-06-25 Luke Kenneth... change order of declarations, to look like output
2018-06-25 Luke Kenneth... reformat declarations to look like test file, bit hacky...
2018-06-25 Luke Kenneth... split mux-generation into separate function, use it...
2018-06-25 Luke Kenneth... correct test file
2018-06-25 Luke Kenneth... cell mux bitwidth 2
2018-06-25 Luke Kenneth... pep8 cleanup
2018-06-25 Luke Kenneth... use tabs not spaces
2018-06-25 Luke Kenneth... 2 wires per cell muxer
2018-06-25 Luke Kenneth... extend mux entries in test file to cover up to 1<<cell_...
2018-06-25 Luke Kenneth... do full cell mux range otherwise spurious outputs occur
2018-06-25 Luke Kenneth... move cell_bit_width function
2018-06-25 Luke Kenneth... add comment insertion thing into muxer output
2018-06-25 Luke Kenneth... clarify out-mux formatting
2018-06-25 Luke Kenneth... remove debug print
2018-06-25 Luke Kenneth... corrections to hand-coded file
2018-06-25 Luke Kenneth... whoops counting cell bit width, maths wrong
2018-06-25 Luke Kenneth... spelling corrections
2018-06-25 Luke Kenneth... rename twi0 and uart0 single functions
2018-06-25 Luke Kenneth... removing GenericIOType, sorting out function names
2018-06-25 Luke Kenneth... correct microtest spec, single interface must take...
2018-06-25 Luke Kenneth... start removing GenericIOType
2018-06-25 Luke Kenneth... change hand-edited bsv to bsv comments
2018-06-25 Luke Kenneth... whoops use bsv comments not python comments!
2018-06-24 Luke Kenneth... change ioN_cell to methods, stop using GenericIOType
2018-06-24 Luke Kenneth... add cell outen wires
2018-06-24 Luke Kenneth... add comments
2018-06-24 Luke Kenneth... add preliminary mux-out wire
2018-06-24 Luke Kenneth... add auto-generated test pinmux.bsv, to be edited and...
2018-06-24 Luke Kenneth... whoops accidentally removed all parameters not just...
2018-06-24 Luke Kenneth... reduce microtest further in size
2018-06-24 Luke Kenneth... rename minitest to microtest
2018-06-24 Luke Kenneth... remove pullup and other pad characteristics as theyre...
2018-06-20 Luke Kenneth... remove None from format functions
2018-06-20 Luke Kenneth... add new types FunctionType and PadCharacteristicsType
2018-06-20 Luke Kenneth... separate pin banks by name
2018-06-13 Luke Kenneth... use getifacetype to identify generation of xxxx_io...
2018-06-13 Luke Kenneth... Revert "input cell-types now output 0 on output as...
2018-06-13 Luke Kenneth... input cell-types now output 0 on output as well.\
2018-06-13 Luke Kenneth... test pinmap.txt file was not uniformly 4 entries long...
2018-06-13 Luke Kenneth... output zero where there is a blank entry in the pinmux
2018-06-13 Luke Kenneth... test/pinmux.txt was previously hand-edited, not in...
2018-06-13 Luke Kenneth... skip blank-string entries
2018-06-13 Luke Kenneth... cell[0] is a string not an int
2018-06-13 Luke Kenneth... remove newline from line before splitting with tabs
2018-06-12 Luke Kenneth... pep8 whitespace cleanup
2018-06-12 rishucodingadding docstring to translate function
2018-06-12 rishucodingadding comment to cellnumber function
2018-06-12 rishucodingreplace split from whitespace to tabspace
2018-06-12 rishucodingreplace split from whitespace to tabspace
2018-05-31 Luke Kenneth... add comment for init fn
2018-05-31 Luke Kenneth... use cell idx to generate comment into pinmux, matches...
2018-05-31 Luke Kenneth... output comment so as to be able to track down output
2018-05-31 Luke Kenneth... autopep8 cleanup
2018-05-24 Luke Kenneth... make mdwn path if it doesnt exist
2018-05-23 Luke Kenneth... correct Makefile path
2018-04-27 Luke Kenneth... microtest experimenting
2018-04-27 Luke Kenneth... even remove gpio, microtest still too big
2018-04-27 Luke Kenneth... add microtest, minitest still too big
2018-04-27 Luke Kenneth... clean up Makefile
2018-04-27 Luke Kenneth... add Makefile/lib auto-generator
2018-04-14 Luke Kenneth... use bit width consistently for mux cells
2018-04-14 Luke Kenneth... must declare mux selection same bitwidth
2018-04-14 Luke Kenneth... put cell width at fixed (max) bits
2018-04-14 Neelthe assignment of a wire from an input configured pin...
2018-04-09 Luke Kenneth... add busenable output
2018-04-09 Luke Kenneth... record bus/ganged type in tsv spec files
2018-04-04 Luke Kenneth... add documentation on pinfunctions
2018-04-04 Luke Kenneth... return which pins are inout-buses from spec pinfunctions
2018-04-04 Luke Kenneth... split bsv generator into functions
2018-04-04 Luke Kenneth... whitespace pep8 cleanup
2018-03-31 Luke Kenneth... selector test goes in opposite direction
2018-03-31 Luke Kenneth... add myhdl mux.py experiment
2018-03-31 Luke Kenneth... clean up pinspec, remove redundant arguments
2018-03-31 Luke Kenneth... big pep8 whitespace cleanup
2018-03-31 Luke Kenneth... add base class for scenario and pinspecs
2018-03-31 Luke Kenneth... big python3 interoperability update
2018-03-31 Luke Kenneth... write out to mdwn file instead of stdout
2018-03-30 Luke Kenneth... autopep8 whitespace cleanup
2018-03-30 Luke Kenneth... add some documentation to the spec modules
2018-03-30 Luke Kenneth... update minitest spec
2018-03-30 Luke Kenneth... rework spec generation functions
2018-03-30 Luke Kenneth... refactoring pin function name generators
2018-03-30 Luke Kenneth... fix UARTQ0 spec
2018-03-30 Luke Kenneth... rename m_class spec jtag and ulpi numbers
next